© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15 © 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

Magic-Flow 2

2K, 3K and 4K Electronic Mixing

Insert Footer 1

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

Introduction

Magic-Flow 2 is a versatile and flexible mixing solution designed to accommodate many low pressure or high pressure applications.

It supports a range of optional, functionality-enhancing modules to provide 2, 3 or 4K component mixing up to a maximum of 29 colours with up to 4 spray guns.

Turn complicated and time consuming mixing operations into highly precise, ‘select and spray’ operations.

Insert Footer 2

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

Magic-Flow 2 Markets and

Applications

APPLICATIONS

Off Road and Earth Moving Vehicles

Aerospace / Aviation

Fork Lift, Trucks and Trailer

General Industry

Agricultural Machinery

Plastic Components

Transportation

Plus Many Others:

SUITABLE FOR MATERIALS

Solvent or Waterborne Coatings

Polyurethanes / Acrylics

Isocyanates / Epoxies

Acid Catalysed Materials

3

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

MagicFlow 2 Features

Insert Footer 4

• 7“ display

• 800 x 480 pixel

• TFT 16bit color

• RS232

• Ethernet

• WLAN

• Stand: included

• LED light tower: included

• Acoustic alarm: included

• PC software: launched 2015

3 air regulators for

• solenoid valves

• atomizing air

• paint pressure

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

MagicFlow 2 Features

Insert Footer 5

• 5 Basic units for easier ordering:

(1) - 2 gear flow meters

(2) - 1 Coriolis (4mm) + 1 gear flow meter

(3) - 1 Coriolis (6mm) + 1 gear flow meter

(4) - 2 Coriolis flow meters (4mm + 4mm)

(5) - 2 Coriolis flow meters (6mm + 4mm)

• 4K standard software loaded

• 32 valves

• 50 Recipes

• Stand not behind, but next to the control boxes; more stable

centre of gravity

• Tower Alarm lights fitted as standard

• Aluminium stand fitted as standard

• 19” draw mounting version option

(as per Ransburg Cascade guns)

• MagicFlow hardener injection method used

• Coriolis meter compatibility

• ATEX or Non-ATEX

• Simple remote panel or reed switch controlled optional extra

• LP & HP versions, both same price

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

MagicFlow 2 Data

Insert Footer 6

Downloadable Information:

• Recipe coating Consumption C1...30 (only A+B

together)

• Consumption for each component or valve 1…32

• Recipe 1…30 Max Flow

• “Gun closed" time in mixing mode for each recipe

• “Gun open" time in mixing mode for each recipe

• Status of the system (parallel to robot com.

module)

• Mixing ratio of the current recipe (while spraying) or

the last active recipe (after stopping)

• Type of alarm (only during alarm event)

• Current recipe (only while mixing)

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

Inside MagicFlow 2

Insert Footer 7

Power

Supply

Air

Regulators

Air Flow

Switch PLC

‘Brain’

‘A’ Side

‘B’ Side

CCV Valves

Gearflow

Meters

Static

Mixer Electrical Control Cabinet

Fluid Panel (built to specification)

© 2015 Finishing Brands - A Carlisle Company All rights reserved. 04/15

MagicFlow 2 Specifications Technical Specifications

Optimal Working Air Pressure 6 – 8 bar (87 – 116psi)

Max Inlet Fluid Pressure Low/High 40bar (580psi) / 250 bar (3626psi)

No. of Recipes 50

Flushing Programs 10 x 20 Steps (Actions)

Flow Rate 50 – 2000cc/min

Operating Temperature Range 10 - 70°C (50-158°F)

Material Valves 32 max e.g. 29 Colours, 2 Solvents, 1 Catalyst

Viscosity Range of Fluid 20-100 cPs

Mixing Ratio Range 0.1:1 – 100:1

Mixing Accuracy +1% (after calibration)

Wetted Parts Stainless Steel, PTFE, Polyamide

Options Multi-Gun, ATEX, Coriolis Mass Flow Meters,

Robot Communications, Agitator Control, Gun

Flushbox, Remote Control, Printer Port,

Atomising Air Switch Off