LTE load analysis with impact of SINR

  • View

  • Download

Embed Size (px)


On 3G CDMA and WCDMA, the coverage will be shrinking when there are much of subscriber on one cell (Cell Breathing). Almost on 4G LTE network,but not in coverage. We will find the SINR (Signal to Interference and Noise Ratio) that will be shrinkage if the RB Load on one cell increased.

Text of LTE load analysis with impact of SINR

  • 1. TD-LTE www.huawei.comTD-LTE Load Analysis VS SINR Quality Author/ Email: Ray Khastur Version: V1.0 (20140119)

2. 0% Load on Planning ToolsBy using Planning Tools U-Net, we can change the Actual Load Based on daily KPI monitoring of RB (DL & UL) usage in order to know SINR level on 4G Live Network . 2 3. How to Change 80% Load on Planning ToolsIn this slide, We have to change the actual load from 0% to 80% in whole mini cluster that we want to analysis in order to know what is the impact of Load with SINR level. 3 4. Simulation Result RSRP 5. RSRP with 0% Load5 6. RSRP with 80% Load6 7. RSRP ComparisonIn this simulation one site have configuration of 10 MHz and all cells using the same Physical and RF Parameter as field implementationFrom Simulation of mini cluster there is no difference between 0% Load compare with 80% Load.7 8. Simulation Result SINR 9. SINR with 0% Load9 10. SINR with 80% Load10 11. SINR ComparisonFrom Simulation of mini cluster there is degradation of SINR > 0 dB at 5.75% due to Load incremental from 0% to 80%. Its mean in every time we want to do optimization, we have to consider load of RB utilization from OSS Daily Monitoring. We have to mapping each cell and implement to our planning tools as our reference or justification if any degradation of SINR KPI during Drive Test as the time goes by.11