Upload
hangkheang-khy
View
10
Download
1
Embed Size (px)
Citation preview
Liebert® RDU-SQuick Startup Guide
MonitoringFor Business-Critical Continuity™
Liebert RDU-S Startup Guide
About this GuideThis quick startup reference provides you with the information necessary
Check your Package Contents: Optional Accessories:
Note: The sensors that are used in this quick start guide are just example of the optional sensors that you can purchase separately.
Product Description
equipment:
Temperatureaccuracy
Outputs
I. Setting up the Liebert RDU-S
II. Connecting the Computer to the Liebert RDU-S
III. Logging into the Liebert RDU-S
Note: 1. The system only supports IE7 or IE8 browser.2. Java V1.6 or above is required for proper function of the software.
Default Login:
Log into the Main Dashboard
Changing the IP Address
Connecting the Temperature/Humidity Sensor (IRM Series Sensors)
that you should follow:
(Picture below describes how to set the dip switch)
Connecting the Temperature / Humidity Sensor to RDU-S
Those ports are the ones also used to series connect the sensors
interface. Just take note on the hardware address of the sensor.
Connecting the Door Sensor and Leak Detect Sensor
the web interface.
the web interface.
Dashboard Features
Configuring the Sensor Page
IV. Configuring Thresholds and Generating Events
Features
VI. Viewing Charts and Data Logs
VII. Using the Camera
Emerson Network Power.Business-Critical Continuity
Connectivity
Infrastucture Management & Monitoring
EmersonNetworkPower.com