Embed Size (px)
Citation preview
Factory & Head office : Allied Automation Engineers,Jhumra Road Mansoorabad Faisalabad-PAKISTAN ZIP code 38000 Tel: +92 41 8737029 ,8739029 Fax :+92 41 8720598 www.hottek.com www.allied-technologist.com Key Contact Persons : Mr.Rehan Akmal Chief Executive Officer Email [email protected] Cell +92 -321-7619000 .+92-336-7619000 Muneeba Abdul Hafeez GM Marketing Email muneeba@allied-technologist,.com Cell +92 -321- 6690211 , +92-320-7619000
Content
Wrinkle/Whisker Machine Range
Grinding Machine
Scraping Machine
Spray Booth
Jeans Baking Oven-Box Type Range
Jeans Baking Oven-Conveyor Type Range
Wrinkle /whisker Machine Range
Hot Tek 3D MF (3D Wrinkle Machine)
Features:-
• Totally Mild Steel Structure.
• Both Side Wrinkle at a Time, Area adjustable
• Pneumatic Control.
• Individual Digital Temperature & Time Control
• Digital Alarm System.
• Electric Vacuum suction System.
3D Regional Crinkle Machine
Features
• Totally Mild Steel Structure.
• Both Side Wrinkle at a Time, Area adjustable
• Pneumatic Control.
• Individual Digital Temperature & Time Control
• Digital Alarm System.
• Electric Vacuum suction System.
Cylinder Type Wrinkle Machine (for crunching)
MODEL HOT TEK CW
Features:
• Totally Mild Steel Structure.
• Maximum Wrinkle Area Up To 8 Inches.
• Pneumatic Control.
• Digital Temperature & Time Control.
• Digital Alarm System.
• Machine Fitted on Stand (Not Desktop)
Bubble Whisker Machine-Single Head,02 stations
Specifications
Special Designed Machine for Bubble whisker effects.
HOTTEK BUBBLE WHISKER MACHINE
Specially designed Bubble Whisker Machine for Bubble whisker design on
jeans. We designed as per end user requirements .
MS Pipe structure .
Electrical Consumption : 7.5 KW
Voltage : 3Phase
Electrical Control : Digital Control Time and Temperature
Production : 60 to 80 Pc per hour
Automatic 3D Natural Whisker Machine Infrared Heating
Hot Tek 3D Natural Whisker Machine specially
design for make Natural Whiskers /Bubble
Whiskers on any portion of Jeans Pants
Specifications
-Totally Mild Steel Strong Structure
-Maximum Wrinkle Area Up
-08 Station Vacuum Plates For Heavy Product
-IR(Infrared)Curing System.
-Maximum production in minimum Time.
-Energy Efficient and Labor cost saving.
3D Natural Whisker Machine-Steam Attachment
Heat Transfer Press Range For Jeans Garments
For Jeans Waistband Transfer
Specification: -
-Heat Transfer Machine (Double Action Automatic)
-Heat Plate Size 1X 20 (Teflon Coated)
-Pneumatically Up & Down( Adjustable Pressure)
-Power 2000 Watt.
-Voltage (Input) 220 Volt-Single Phase
-Air Pressure 30 -60 PSI.
-Digital Temperature Control
-Digital Temperature Control with PID (Up to 300 C)Time(99 Sec).
-Large Character LCD
-Alarm Indication on LCD.
-Auto & Manual Selection for Reset.
-Digital Piece and Life Counter.
Latest Additional Features:
-Machine Ideal Warring to Avoid Heat Loss and Energy Saving.
-Resettable Counter.
-Counter Data save even in Power Failure.
-Transfer Time from 1 Second to 240 Second.
-Accidental Press Safety.
Cross Laser Marker System Optional
Heat Press For Transfer on Waistband
Special Heat Transfer Machine For Transfer Stickers on Jeans pant Waist Band.
Technical Specifications:
Plate size : 4 x 12 inches
Power : 1 kw
Voltage : 220
Air pressure : 65PS
Heat Transfer Press For Shiny Effects
Equipment For Grinding and Scraping
Edge Grinding Machine FT-4 (04 stations)
•Totally Mild Steel Structure.
•Specially Design for Pocket Edge and Bottom Edge Grinding.
•Independent Speed Control for Each Head
(For Different Grinding effects)
Automatic Trouser Brushing Machine
Features:-
-Mild Steel Structure (Stove Painted).
-Regulated Air filling inflate in Balloons.
-Automatic front and Back Turning with
Adjustable Timer (PLC )(for Accurate production Calculation)
Specification:-
1-220 Volt –Single Phase.
2-300 Watt Maximum
3-4.5~6 Bar Air Pressure.
4-150kg Weight.
Manual Jeans Brushing Machine
Features:-
-Mild Steel Structure (Stove Painted).
-Regulated Air filling inflate in Balloons.
-Automatic front and Back Turning.
Specification:-
1-220 Volt –Single Phase.
2-300 Watt Maximum
3-4.5~6 Bar Air Pressure.
4-150kg Weight.
PP Spray Booth
Features: • M.S Pipe Strong Structure.
• Cabinet Covered by G.I sheet (20SWG) Painted.
• Bottom water storage tank for water curtain made by
• G.I Sheet 20 SWG).
• Heavy Duty Suction Blower (instead of Fan).
• Water Recycle Pump with Filter.
• Dummy Tilt Position by Pneumatic.
• Dummy Rotate by Pneumatic (Optional)
• Automatic Air Pressure Regulation in Balloons.
• Spray Gun (Optional).
• The Length of the cabinet varies depending on the number of dummies.
•
Curing Ovens for Jeans Baking • Box Type
• Conveyor Type
Jeans Baking Oven-Box Type (Electrical /Gas)
MODEL HOT TEK HT10
Features:
• Electrical Heating.
• Overall Machine Height 85in.
• Overall Machine width x Depth 36inches x 36inches.
• Overall Machine weight 160kg.
• Electrical Requirement 440 Voltage.
• Power Consumption 12 KW.
EX WORK PRICE : PKR.220,000
Delivery Time : 10-12 Days.
Jeans Baking Oven -Electrical & Gas
Features:
•Production Rate 200 Pcs/hr.
•Natural and LPG Gas Burner with Automation.
•Automatic fume Drain System during process and end of Cycle.
•Electrical Consumption 4.5Kw.
•Electrical Requirement 440v AC 50HZ 3 Phase.
•Digital Temperature (Max 200°C)and Timer (120min)
•Overall Machine Height 8Ft.
•Internal Height 7Ft.
•Internal Depth 10Ft.
•Internal width 8Ft.
•Overall Machine Weight 1500kg
Jeans Baking Conveyor Type Oven (Electrical & Gas)
Jeans Baking Conveyor Type Oven (Electrical & Gas)
Specifications and Features:
•Oven Size L32Ft x W8ft x H 8.5Ft
•Conveyor Length 117Ft “L” Type.
•Hanger inside chamber 85Pcs
•Hanger Outside chamber 35Pcs
•Speed 6 Hanger/Minute (Variables)
•Heat Insulation 1150 C°-130C°Kg Density
•Oven Inner Lining 16 SWG.GI Sheet.
•Oven Outer Lining 18 SWG GI-Painted Sheets.
•Heating System (1000000 BTU/h) Indirect Heating from Fire Tube Heat Exchanger 220 Sq FT
•Digital Time (Conveyor Speed) and Temperature Control with PLC (Programmable Logic Controller)
•10.h.p Blower Motor.(For Hot Air Flow)
•½ h.p Burner Blower Motor.
•1.h.p Air Curtain Blower.
•1.h.p Hood Fan Motor.
•2.h.p Conveyor Gear Motor with Frequency Inverter.
•All Motors with Overload Protection.
•Floor Lighting.
•Conveyor Auto Lubrication System.
•Double Burner one with Heat Exchanger other without Heat Exchanger.
