Advantages of 5-layer Extrusion

5-Layers Advanced Technology for manufacturing Cover films

Advantages Optimal combination of raw materials that endows the cover film whit improved mechanical properties.Optimal distribution of additives that enables efficient long term activity.

ADVANTAGES OF 5-LAYER EXTRUSION

ADVANTAGES OF 5-LAYER EXTRUSION

Reduces Dust Accumulation

Reduces the accumulation of dust on the greenhouse cover.The advanced technology of 5-Layer extrusion, permits the inclusion of dust - reducing additive to the outside (top) layer of the film. The upper layer produced in this fashion is especially smooth reducing the accumulation of dust.

ADVANTAGES OF 5-LAYER EXTRUSION

Mechanical strength

The application of our new manufacturing five layers technology enables us to process raw materials that guarantee the high mechanical strength of the coverfilm. For example, the incorporation of EVA and Metallocene adds important mechanical properties to the films - strength, flexibility and compatibility with all the standards of mechanical tests.

ADVANTAGES OF 5-LAYER EXTRUSION

IR blocking

• Prevent heat radiation loss from the Greenhouse to the atmosphere.• Maintain higher foliage temperatures and drier plants.• Reduce the incidence of frost damage.• Lead to saving in heating costs.

ADVANTAGES OF 5-LAYER EXTRUSION

Other additives

Ginegar’s proffesional secrets make the 5-Layer technology the best in the world...

ADVANTAGES OF 5-LAYER EXTRUSION

Anti drip

The Anti Drip films contain special additives which eliminate individual droplets, turning them instead into a continuous thin layer of water that runs down the sides of the greenhouse roof and walls.

Anti drip

Other additives

IR blocking

Mechanical strength

Reduces Dust Accumulation

FIVE LAYERS

COVERING THE WORLD WITH CARE