usb 50gethernet e

High-performance Control and Display UnitsEmbedded Control Units and Displays are the foundation

of machine control systems. Each unit can act as an

independent control unit in smaller systems or as a part of

the total control system. They are compact multifunction

units, and have open I/O interfaces which makes it easy to

connect commonly used devices such as sensors, actuators

and joysticks.

The design and unique shape of the unit housing protects

the electronics inside effectively against most demanding

environmental conditions, such as cold, heat, vibration,

moisture, and impacts. Units can handle impacts up to 100G,

and are water and dust proof according to IP67. This, along

with the functional design of the unit housing, makes it

possible to install them almost anywhere in the machine as

the unit seldom requires any extra protection.

The type of each input is determined by the application

software, allowing for flexible use of the unit. The units are

PLCopen programmable which makes the programming

easy and convenient, shortening development time for new

systems. CODESYS programming tool provides an easy

graphical programming environment for developers to work

with.

Epec uses gold plated, heavy duty, AMPSEAL connectors,

which are convenient to handle, both in the factory and

during the field service. Each connector is color coded and

mechanically keyed to fit only to the correct, corresponding

place. The connector type is specially designed for wire

harness use.

Up to four CAN bus interfaces increase the possibilities

of connecting other control units and CAN devices with

the unit. With several CAN bus interfaces, these units are

also capable of working as a gateway between different

CAN buses. Epec CANopen®, SAE J1939 and ISOBUS

communication protocol implementations together with

Epec MultiTool configuration support makes it possible to

easily set-up communication with the most commonly used

devices used in the mobile machinery.

Epec 6000 series - powerful and rugged displays and a remote access unit designed for extreme environmentsEpec 6ooo series product family consists of high-performance,

rugged and easily configurable 7” and 12” displays as well as

a remote access unit specially designed for mobile machinery.

Combining modern computing, software and display technology,

Epec 6000 series products are an ideal solution for the most

demanding heavy duty applications like mining machines,

construction machines, forest machines etc. Fully enclosed

aluminum housing provides water and dust proof operation

according to IP66.

codesys 3.5 programmable graphical user interface provides an opportunity to maximize machine usability

State-of-the-art CODESYS 3.5 programming environment gives

software developers unique benefits, such as an easy-to-use and

modern editor with versatile user interface design capabilities

using CODESYS 3.5 Target Visualization.

Together with our extensive set of application libraries and

MultiTool configuration tool we can offer customers a package

that significantly shortens the time-to-market by minimizing

the effort and maximizing the result of the system development

project. Epec 6000 series display units fulfil all the needs required

of a central operator interface for mobile machines.

built-in wireless communication interfaces brings industrial internet to mobile machinery

All Epec 6000 series products can be equipped with versatile

wireless communication interfaces, which makes them ideal

products to connect mobile machinery to industrial internet

solutions, such as Epec GlobE.

key characteristics• High CPU performance

• CODESYS 3.5 programmable

• Epec MultiTool support

• CAN, Ethernet, RS232 and USB interfaces

• CANopen and SAE J1939 communication

• Fully enclosed aluminum housing, IP66

Different memory sizes are available as options on request.

MiniPCIe card place enables additional options such as wireless

communication interfaces (2G/3G/GPS/Glonass or WLAN).

epec 6000 series display units• Wide viewing angles (with In-Plane Switching (IPS) technology

in 7” display)

• Excellent sunlight readability

• High-end graphics

• Display backlight control

• Connectors for external button panel, user wheel or keyboard

• Two analog camera inputs

• Built-in Speaker or Buzzer

• Capasitive or resistive touch screen depending on the model

• Different panel mounting versions also available on request

product order codes for epec 6107 display unit

e30d6107-02 (2g/3g/gps/glonass, 2 x ethernet, 2 x camera

input)

e30d6107-12 (2 x ethernet)

e30d6107-22 (2 x ethernet, 2 x camera input)

product order codes for epec 6112 display unit

e30d6112-21 (2g/3g/gps/glonass, 2 x ethernet, 2 x camera

input)

e30d6112-22 (2 x ethernet, 2 x camera input)

epec 6100 remote access unit

Epec 6100 Remote Access Unit is based on the high performance

6000 series product platform without the display panel. The

built-in 2G/3G/GPS/Glonass interface makes it an ideal gateway

to connect mobile machinery to the industrial internet when

there is no need for an on-board HMI. CODESYS 3.5 programming,

MultiTool configuration and built-in Epec GlobE support makes it

the most flexible and easy-to-use gateway product in the market.

product order code for epec 6100 remote access unit

e30d6100-21 (2g/3g/gps/glonass, 2 x ethernet)

Epec 6107 Display Unit

Epec 6100 Remote Access Unit

Epec 6112 Display Unit

Display size & resolution 7” 800 x 480 (WVGA) No display 12,1” 1024 x 768 (XGA)

Display brightness 800 nits No display 600 nits

Aspect ratio 16:9 No display 4:3

Touchscreen Resistive No touch Capacitive (PCAP)

Backlight/Lifetime LED/70.000 hrs No display LED/50.000 hrs

Processor ARM Cortex A9 Dual Core (800 MHz), 32-bit, internal Graphics Processing Unit (GPU)

Operating system Linux

Programming CODESYS 3.5 + Epec MultiTool

Memory

Flash 4 Gbyte (8 Gbyte as an option)

RAM (DDR3) 1024 Mbyte

Non-volatile RAM 512 kbyte

CAN 2

RS-232 1

USB 2

Ethernet 10/100 2

Camera inputs (analog) 2 Optional 2

I/O interface 5 pins total

DO/DI 2

AI/DI 1

DI 2

5V REF output 1

Speaker X Not Available Not Available

Buzzer Not Available Not Available X

Ambient light sensor X Not Available Not Available

Radio connectivity

GSM/GPRS/EDGE Optional X/X/X Optional

UMTS/HSPA+ Optional X/X Optional

GNSS Optional GPS and GLONASS Optional

EPEC GlobE support Yes

Connectors

AMP 1 x AMP23

M12 2/3

SMA optional 2 optional

Nom. operating voltage 12/24 VDC

Full Operating range 8,4-36V 8,4-36 V 9,2-36V

Overvoltage protection 70 VDC continuous overvoltage

Operating temperature up to -30 ... +70C

IP Class IP66

Size 183 x 128 x 49,5 mm 182 x 138 x 43 mm 310 x 290 x 82 mm

Weight 1,1 kg 0,7 kg 2,7 kg

Mounting Panel/Pedestal Direct Panel/Pedestal

Future options WLAN