Embed Size (px)
Citation preview
Compression Testing Machine
Aimil Series Compression Testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non- technical personnel to operate them with ease and complete dependability.
• High stability.• Self-aligning platen assembly.• Load Gauges are calibrated in kN against certified Proving Rings, traceable
to NPL / NCCBM.• Suitable for testing cubes and cylinders of various sizes.• Using special platens, bricks can also be tested.• Logged data printing facility through a parallel port interface available in
digital and micro controller based versions.• Calibration process accredited by NABL (National Accreditation Board for
Laboratories).• Machines with CE mark also available, on special request.• Operator’s safety features like metal door with a Perspex window and
overload tripping device are provided in all models.
Features of Compression Testing Machine
• Analogue Compression Testing Machine• Portable Compression Testing Machine• Digital Compression Testing Machine• Micro Controller Based CTM with Automatic Pace Rate Controller• Automatic Compression Testing Machine• Servo Controlled Compression Testing Machine
Types of Compression Testing Machine
Analogue Compression Testing Machine
High Stability Self-aligning platen assembly Using special platens, bricks can also be tested. Machines with CE mark also available, on special
request. Load Gauges are calibrated in kN against certified
Proving Rings, traceable to NPL / NCCBM.
Key Features:
Loading Unit Pumping Unit
Manually Operated Electrically Operated
Two main units of Analogue CTM:
Analogue CTM is available in 50KN to 3000 KN ranges(50KN, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN).
Portable Compression Testing Machine
The equipment consists of a Loading Unit, an integral double acting manually operated pumping unit fitted to the base of the machine and a calibrated Load Gauge is fitted with the top. It has a detachable Hydraulic Jack. The hydraulic cylinder is placed on the base of the Loading Unit.
Specifications:Capacity : 1000kNMax Vertical Clearance : 350mmMax. Horizontal Clearance : 220mmPlaten Size : 165mm SquarePiston Dia : 152.4mmPiston Stroke : 25mm
Portable CTM is available in 50KN to 3000 KN ranges(50KN, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN).
Digital Compression Testing Machine
Meets the key specifications of IS -516 & IS 14858, and other ASTM, EN and BS standards depending on platens and accessories chosen.
Automatic stress determination and display. Overload safety protection. Peak Load, Peak Stress, Unique Record No.
is displayed. EDI has provision to configure more than one
Mode. Dynamic Calibration Data storage approx. 2000 records CVT supplied to ensure constant voltage to
digital indicator.
Key Features:
Digital CTM is available in 50KN to 3000 KN ranges(50KN, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN).
Micro Controller Based CTM with Automatic Pace Rate Controller
Automatic pace rate control at a present value.
Pave deviation bar graph. Overload safety protection. Dynamic Calibration. Menu Driven sample details. User can set break point. Peak stress calculation based on sample type
and shape. Multifunctional keyboard.
Key Features:
Micro Controlled based CTM is available in 50KN to 5000 KN ranges(50Kn, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN, 5000KN).
Automatic Compression Testing Machine
Fully Auto Controlled - Operable with EDI Mode-4 runs with Mode-1 calibration. Peak stress calculation based on sample
type and shape. Automatic Pace rate control to set value Peak Load, Peak Stress, Unique Record
No. is displayed. Desktop Computer with licensed
Windows 7 -64 bit The Horizon Software is designed for 32-
bit & 64-bit operating systems running Windows Vista, Windows 7 or
Windows 8. It does Not support Windows XP and below.
Key Features:
Automatic CTM is available in 50KN to 5000 KN ranges(50KN, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN, 5000KN).
Servo Controlled Compression Testing Machine
Aimil series of Servo Controlled CTM are the finest of their types available. The rugged construction & extreme simplicity makes it possible for personnel with minimum training to operate them with ease & complete dependability.Aimil Servo Controlled CTM is a fully automated version of manual/semi-automatic CTM’s having provision of stress & strain controlled loading.
Loading Unit Hydraulic Power Pack Control Unit & Display
Three main units of Servo Controlled CTM:
Servo Controlled CTM is available in 50KN to 3000 KN ranges(50KN, 100 KN, 250KN, 500KN, 1000KN, 2000KN, 3000KN).
Compression Testing Machine operates in following Industries:– Civil Infrastructure– Education– Metal & Metallurgy– Special Applications– Traffic & Transportation
Industries
Contact Us
011-30810200
Naimex HouseA-8, Mohan Cooperative Industrial Estate,Mathura Road, New Delhi - 110 044
011-26950011
www.aimil.com
