Upload
chryssa-skodra
View
452
Download
0
Embed Size (px)
DESCRIPTION
Chryssa Skodra -blogger and Silver Insider by Fujitsu- creates a guide on how to set up Workplace Protect and especially the Fingerprint Sensor and Face Recognition.
Citation preview
Chryssa Skodra
HOW TOINSTALL & CONFIGURE WORKPLACE PROTECT
Fingerprint Sensor and Face Recognition
A GUIDE TO ADVANCED SECURITY ON YOUR STYLISTIC U740
TABLE OF CONTENTS
1. INTRODUCTION
2. INSTALLATION
3. REPAIRING
4. UNINSTALLING
5. FINGERPRINT SENSOR
6. FACE RECOGNITION
7. CONCLUSION
CHAPTER ONE
INTRODUCTIONToday companies’ information security begins with
controlling access to PCs. Protect confidential data
and programs by accurately verifying and
authenticating PC users, and effectively preventing
unauthorized use. For private and especially for
professional users, since many companies have a
Bring Your Own Device (BYOD) policy in the
workplace, information security is of paramount
importance. Security begins with controlling access
to personal computers in order to protect
confidential data and programs by accurately
verifying and authenticating PC users as well as
effectively preventing unauthorized use.
My favourite features on my flexible and
convertible 2-in-1 device -the Fujitsu STYLISTIC U704-
is the Biometric Fingerprint Sensor and the Face
Recognition. Check out my manual to get them set
up easily!
CHAPTER TWO
INSTALLATION
Installation of Workplace Protect
You can find the installation package
for Workplace Protect
• on the Internet at
http://fujitsu.com/fts/support
• on the current "Drivers & Utilities" DVD
• with DeskUpdate
Installation of Workplace Protect
You need administrator rights to install
Workplace Protect.
Proceed as follows to install Workplace
Protect:
► Depending on the operating systemplatform, double-click on the file
WorkplaceProtect32_Setup.exe or
WorkplaceProtect64_Setup.exe
► In the User Account Control dialoguebox, click on Yes.
► The Workplace Protect installationwizard is displayed.
► Follow the instructions on the screen.
► Confirm the license conditions.
► Enter the installation directory that yourequire or use the installation directory
given.
Installation of Workplace Protect
The Destination Folder dialog box allows
the installation directory for Workplace
Protect to
be modified.
The default installation directory is:
%ProgramFiles%\Fujitsu\WorkplaceProt
ect.
► Confirm with Next.
► Click on Install.The installation is started.
To complete the installation, you will be
asked to reboot the system.
► Confirm with Yes.The system is rebooted.
CHAPTER THREE
REPAIRING
Repairing of Workplace Protect
The Workplace Protect installation can be
repaired if it becomes corrupted, e.g.
because a required file was inadvertently
deleted. The settings and user data are
retained.
To repair the Workplace Protect
installation, proceed as follows:
► Depending on the operating systemplatform, double-click on the file
WorkplaceProtect32_Setup.exe or
WorkplaceProtect64_Setup.exe
The installation wizard starts.
► In the window Program maintenance,select the option Repair and confirm with
Next.
► Click on Install.The installed components are repaired, for
example, missing files are re-installed.
To complete the installation, you will be
asked to reboot the system.
► Confirm with Yes.
CHAPTER FOUR
UNINSTALLING
Uninstalling Workplace Protect
Uninstalling Workplace Protect using Setup
If you uninstall Workplace Protect, please first
export the access data for the Encrypted
Container and Password Safe applications,
because this data will otherwise be lost
► Depending on the operating systemplatform, double-click on the file
WorkplaceProtect32_Setup.exe or
WorkplaceProtect64_Setup.exe
► In the Program maintenance window, selectthe option Remove.
► Click on Next.
► Click on the message I'd like to proceedwith the uninstallation and confirm with
Remove.
Workplace Protect will be uninstalled.
To complete the process, you will be asked to
reboot the system.
► Confirm with Yes to reboot the system or
► To reboot the system later, click on No
Uninstalling Workplace Protect
Uninstalling Workplace Protect using
Windows
► Uninstall Workplace Protect as software,this process is described in the operating
instructions for your operating system.
A warning is displayed, that uninstalling
Workplace Protect will remove all settings.
► Confirm with Yes.
► If you have not backed up the settings,click on No to abort the uninstallation.
To complete the process, you will be asked
to reboot the system.
► Confirm with Yes to reboot the system.
► To reboot the system later, click on No.
CHAPTER FIVE
FINGERPRINT
SENSOR
Fingerprint settings
No fingerprints can be recorded for user
accounts which were automatically created
by i Windows 8 (Administrator, Guest). An error
message appears in this case.
► Under Security devices, click on Fingerprint.
A wizard with further information on the
functionality is shown the first time.
► Confirm with Next.
► When you are asked, authenticate yourselfto the system (see chapter "Making the
necessary
authentication in Workplace Protect").
► Select the finger for which you would like toperform an action.
► Click on the button of the desired action:
At least two fingerprints must have been read
in and stored before you can end the
configuration.
► In the menu bar, click on Security devices -Fingerprint.
► Select one finger by clicking in the circleabove the desired finger.
The circle above the finger will be marked in
blue.
► Click on Enroll.
► Draw the desired finger evenly over thefingerprint sensor.
Four successful recordings must be made to
complete the process.
The finger which has been read in will be
marked with a green tick.
► Confirm with Next.
► Repeat this process for the other fingerprints.
A summary of the settings you have made is
displayed.
► Confirm with Finish.
Fingerprint settings
CHAPTER FIVE
FACE
RECOGNITION
Make sure there is good lighting during therecording.
The advanced functions of face recognition areenabled for a period of 30 days. To be able to usethese advanced functions after the 30 days haveexpired, please purchase a license key.
► In the menu bar, click on Security devices - Facerecognition.
A wizard with further information on thefunctionality is shown.
► Confirm with Next.
► When you are asked, authenticate yourself tothe system
► Select the desired WebCam.
► If you notice video lags on your system, checkthe checkbox Low resolution.
► Confirm with Next.
► Place yourself in front of the WebCam in theframe shown.
When the automatic recognition has completed,a configuration wizard is displayed offering further
settings options.
Face recognition settings
► Make the settings you require:
Advanced functions can only be used with a
valid license.
A summary of the settings you have made is
displayed.
► Confirm with Finish.
CHAPTER SEVEN
CONCLUSION
“The Stylistic Q704 is a reliable business
2-in-1 device with an impressive array
of features and distinct advantages.”
“Chryssa Skodra, Silver Insider & Independent blogger
DOWNLOAD THIS GUIDE ON SLIDESHARE!
READ MY BLOG POST ON THE MASTER YOUR BUSINESS BLOG
http://www.master-your-business.com
Follow us!