12.3 SHEET METAL FORMING MACHINERY 12.3 MASCHINERY AND TOOLS All Rights Reserved 12.3.4 TRUMPF JOINING PRESS TF 350-2 Art.-Nr. 745 Joining of air duct profiles with duct walls - Point by point cost-effective advantage - In a cold form process, the TRUMPF-joining press cuts and moulds the fastener from the raw material – leading to the metal sheet being positively locked with the material below - Preliminary work or metal finishing is averted and costs for fasteners like screws or rivets are eliminated - Works on an emission free and low cost principle. Furthermore the product provides a permanent and tight connection with an excellent finish, which is also very pleasing to the eye - A quick operation which stands unrivalled - Includes swinging arm, 230 V Technical specifications: Maximum sheet thickness (Steel): 3.5 mm at 400 N/mm 2 2.5 mm at 600 N/mm 2 Maximum sheet thickness (Aluminium): 4.0 mm at 250 N/mm 2 Minimum sheet thickness: 0.8 mm Maximum height of rim: 40 mm Maximum mating force: 25 kN Maximum elevation sequence: 2/s Motor output: 1400 W, 230 V Weight (without cable): 8.3 kg Edge distance: minimum 8 mm maximum 58 mm

12.3.4 Trumpf Joining Press Tf 350 2

Download PDF Report

Upload
mez-technik-air-system-products
View
340
Download
2

Embed Size (px)

Citation preview

Page 1: 12.3.4 Trumpf Joining Press Tf 350 2

12.3 SHEET METAL FORMING MACHINERY

12.3

MASCHINERY AND TOOLS

12.3.4 TRUMPF JOINING PRESS TF 350-2 Art.-Nr. 745

Joining of air duct profiles with duct walls

- Point by point cost-effective advantage- In a cold form process, the TRUMPF-joining press cuts and moulds the fastener from the raw material – leading to the metal sheet beingpositively locked with the material below- Preliminary work or metal finishing is averted and costs forfasteners like screws or rivets are eliminated- Works on an emission free and low cost principle. Furthermore the product provides a permanent and tight connection with an excellent finish, which is also very pleasing to the eye- A quick operation which stands unrivalled- Includes swinging arm, 230 V

Technical specifications:

Maximum sheet thickness (Steel): 3.5 mm at 400 N/mm22.5 mm at 600 N/mm2

Maximum sheet thickness (Aluminium): 4.0 mm at 250 N/mm2Minimum sheet thickness: 0.8 mmMaximum height of rim: 40 mmMaximum mating force: 25 kNMaximum elevation sequence: 2/s Motor output: 1400 W, 230 VWeight (without cable): 8.3 kgEdge distance: minimum 8 mm

maximum 58 mm