[INC  281  MULTIDISCIPLINARY  WORKSHOP  WEEKLY  REPORT]   January  26,  2012  

 

Department  of  Control  System  and  Instrumentation  Engineering  KING  MONGKUT’s  UNIVERSITY  OF  TECHNOLOGY  THONBURI  

Name-­‐Surname   Sapon  Pitak  Student  ID.   53211830  

Group  Name   conthai  Engineering  

Team  Members  Bank  ,  Benz  ,  Golf  ,  june  ,  champ  

Product  Design  Team  Members  

P’dukdik  ,  P’friend,  P’ake  P’L  

   Weekly  Progress            I  had  searched  the  data  about  the  wii-­‐mote.  Since the Wiimote can track sources of infrared light, you can track pens that have an IR led in the tip by pointing a wiimote at a projection screen or LCD display.  This  one  is  including  4  parts;  those  are  wiimote,  screen,  IR  pen  and  software.            Before  you  use  IR  pen  with  computer,  you  have  to  install  the  software  for  connecting  between  wiimote   and   computer.   You   can   download   software   in   this   website,   http://WiimoteProject.com.  Then  you  connect  the  wiimote  and  computer  via  bluetooth.  Next  step  is  the  most   important,  you  have   to  place   the  wiimote   in   suitable  angle   that   is  45®  with   the   screen.  After   that  you  can  write  anything  in  the  screen  and  the  thing  you  write,  it  is  shown  in  the  computer.  

 Figure  1.  

work  progress  of  wiimote-­‐whiteboard    

 Figure  2.  

 Demonstration  of  wiimote-­‐whiteboard  

 Engineering  Analysis  Strong  Point  

-­‐  We  can  write  anything  in  the  wall  without  pen  or  pencil.  Weak  Point  

-­‐ It’s  hard  to  place  the  wiimote  in  suitable  angle.  If  we  place  in  wrong  angle,  the  receiver  can’t  get  all  the  infrared.  

 Next  Week  Job   I  will  search  the  data  about  cooker  hood.