www.winking.be

Ricoh Print&Shareaccepting AS/400 PCL5 print jobs

E(12U(s0p17.10h007v0s0b000T(s0B&d@&l3O&l0S&l005C&l005C(s0p17.10h007v0s0b000T(12U(s0p17.10h007v0s0b000T(s0B&d@&l3O&l0S&l005C&l1T(s0p17.10h007v0s0b000T&l3O&l0S(s0p17.10h007v0s0b000T(s0p17.10h007v0s0b

AS/400 PCL5

*Print&Share Corporate version >= 2.8.3.40

www.winking.be

Configure Print&Share

www.winking.be

Configure Print&Share

Change the default data type from “NT EMF” to “RAW”

www.winking.be

Test the configuration

- Method 1: using the copy commandhttps://technet.microsoft.com/en-us/library/cc771997.aspx

- Method 2:using the lpr commandhttps://technet.microsoft.com/en-us/library/cc731926.aspx

www.winking.be

Test the configuration

TEST METHOD 1

www.winking.be

Test the configuration (copy command)

Select a .PRN file and use the “copy /b” command to print to your shared driver.

Note: print to the share name via \\127.0.0.1\<printer>Share the P&S printer to test

www.winking.be

Test the configuration (copy command)

www.winking.be

Test the configuration

TEST METHOD 2

www.winking.be

Test the configuration (LPR command)

www.winking.be

Test the configuration (LPR command)

Make sure the Line Printer Daemon service (LPD) is running

www.winking.be

Test the configuration (LPR command)

Share the P&S printer to test

Select a .PCL file and use the “lpr –S <ip> -P <printer> <file>” command to print to your shared driver.

Note: print to the share name via \\<MyIP>\<printer>

www.winking.be

Test the configuration (LPR command)

www.winking.be

FAQ• Special character (é, è, ...) are not shown correctly.

Make sure you have an AS/400 font installed on the PC (e.g.: LINE PRINTER.TTF)

• Print&Share shows “No Documents” or does not start. When the print processor data type is set to RAW,it does not accept NT EMF print jobs.When set to NT EMF it does not accept RAW print jobs.

• OS should be DirectX 11 compatible. You can check this via DxDiag

• Print&Share corporate >= 2.8.3.40 required