LG SoC Tutorial      Web:  posterdigital.com/soporte  Contact: contact@posterdigital.com 

12/June/2015

LG Soc Tutorial PosterDigital 1

  

LG (supported models)  3 

LG screen installation  4 

LG options  6 

Reboot  6 

Reload  6 

Change the screen from Remote Server to Local Player  7 

      

LG Soc Tutorial PosterDigital 2

LG (supported models)

LS75A MS75A LS55A LS53A LS95A

LG Soc Tutorial PosterDigital 3

LG screen installation Hold down the Settings button on the remote control for ten seconds. After ten seconds, a blue box will appear in the upper right corner. Enter the numbers 8080 and then press OK.

Make sure that Application Launch Mode is set to Local so that you can download the application. Enter the URL “http://YOUR_PROJECT.posterdigitalhq.com/lgapp/scap_app.zip”, substituting “YOUR_PROJECT” for the actual name of your project.

LG Soc Tutorial PosterDigital 4

Once you’ve entered the URL, select the option Remote, as shown in the image below.

Press CONFIRM and wait for the application to complete the launch process.

Once loaded, restart the application (this may take a few minutes). Finally, restart the LG screen.

LG Soc Tutorial PosterDigital 5

LG options The webOS player integrated into your LG display provides two options within your PosterDigital project.

Reboot Selecting this option will turn your screen off and back on.

Reload Selecting this option will reload the content and start it over from the beginning.

LG Soc Tutorial PosterDigital 6

Change the screen from Remote Server to Local Player

For smoother operation with some players, PosterDigital has developed two ways to play content:

1. Using a remote server: the player continuously checks the programmed content by connecting to the Internet.

2. Using a local player: the player saves new content in the cache and plays them using internal memory.

For this type of player, we recommend the second option to make your screen operate faster. To change from Remote Server to Local Player, follow these steps:

Step 1:

Go to the Screens section.

LG Soc Tutorial PosterDigital 7

Step 2:

In the new window, you’ll see the screens that are installed in your project. Select

the screen that you want to reconfigure.

Step 3:

To access the screen settings, click on Edit.

Step 4:

You will see the screen settings. Scroll down to see the editable information:

● NAME

● IP ADDRESS

● WEBDAV PORT

● HTTP PORT

● API PORT

● COMMENTS

● CONTENT STORAGE

● TYPE

● ON/OFF CONTROL

LG Soc Tutorial PosterDigital 8

Step 5:

Select option number 7, Content Storage, and you’ll see two options: Server (Remote)

and Player (Local). Select Player and then press Save.

Step 6:

Once you’ve saved the settings, you’ll see the storage capacity of your player.

LG Soc Tutorial PosterDigital 9