Upload
rexarc-international-inc
View
231
Download
3
Embed Size (px)
Citation preview
Since 1924, Rexarc has been recognized as the leader in high quality, and high value industrial gas distribution systems ...There is no substitute!
Automated High Pressure Driers for Acetylene Gas
Compression
INTERNATIONAL, INC.
Regenerative High Pressure Driers
• What is it?– A system to dry acetylene gas coming from
the compressors and prior to the cylinders. • Why did we develop it?
– To reduce cost and increase operational effectiveness over current methods.
• When will it be ready?– NOW! Inquire today!
INTERNATIONAL, INC.
Regenerative Drier Pictures
INTERNATIONAL, INC.
Technical Specifications1.1 SPECIFICATIONS
WEIGHT……………………………………………………… 650 Lbs. (without desiccant installed) 700 Lbs. (with desiccant installed) DIMENSIONS................................................ See Section 3.2 (Dryer), Section 3.3 (Control Box) IN/OUT CONNECTION……………………………….. 1/2” NPT VESSELS (DESICCANT TOWERS)
Construction………………………………………….. Manufactured to the ASME CODE, Section VIII, Division 1 Vessels stamped “U” designator Design Pressure……………………………………… 3000 PSIG Design Temperature………………………………. -20°F TO 300°F
PIPING Threaded Fittings…………………………………… ASME B16.11 Threaded Unions…………………………………….ASME B16.11 Pipe……………………………………………………….. Carbon Steel, Schedule 160
VALVES Inlet……………………………………………………….. Two (2) normally open ball valves, air operated type (air to close – fail open) Outlet……………………………………………………. Two (2) normally open ball valves, air operated type (air to close – fail open) Purge……………………………………………………… Two (2) normally close ball valves, air operated type (air to open – fail close) Pressurization………………………………………… Normally closed ball valves, air operated type (air to open – fail close)
ELECTRICAL 115V/1PH/50-60Hz
DESICCANT Material…………………………………………………. Activated Alumina, 1/8” (2-5 MM) Bead type Quantity Per Tower……………………………….. 25 Lbs.
OPERATING CONDITIONS System Process……………………………………….3600 SCFH Acetylene Gas Inlet Gas Pressure………………………………….. MIN 200 PSIG……… MAX 400 PSIG Inlet Gas Temperature…………………………… MIN 60°F…………….. MAX 95°F Ambient Air Temperature …………………….. MIN 60°F…………….. MAX 120°F
INTERNATIONAL, INC.
Technical Specification-Options
• System output: 50 m3/hr and 100 m3/hr
• Equipment design pressure: 300 bar
• Mounting systems for floor or wall available as an option
INTERNATIONAL, INC.
What are the advantages?
• What are the advantages?– Negligent consumable material cost– Reduced labor hours required for consumable
change out– Reduced down time due to limited plant
stoppage
INTERNATIONAL, INC.
Want to find out more?
• Contact Rob Moyer - President/CEO– Email: [email protected]
– Work: +1.937.839.4608 x113
– LinkedIn Group: Acetylene Plant Operations and Management
P. O. Box 7, West Alexandria, Ohio 45381 USA
Telephone 937-839-4604
Fax 936-839-5897
www.rexarc.com • [email protected]