What-to-do Before Performing Home

HVAC Maintenance

The heating and cooling system of your home usually runs smoothly

when it is new, but once it has aged and it is poorly maintained, it

can decline in efficiency and worse, it could cost you a lot in terms of power consumption.

That is why it is important to keep your home heating and cooling

unit at peak performance in order to benefit from its maximum

service. An efficient performance is the result of proper

maintenance.

No matter what kind of home hvac you have, there are basic steps

you need to consider to keep your system in top condition.

When the heating and cooling system malfunctions, it could be a problem from these three major parts – the heat/cold source, the

distribution system, or the thermostat.

Depending on the problem, it is essential to start with the simplest

maintenance or troubleshooting steps such as...

• Check for power. Make sure that the unit has power.

• If your HVAC system has a reset button, activate it. But before pressing the button, let the motor cool first.

• Check the power switch. Make sure that it is turned on.

• Make sure that the thermostat is set properly. It is advisable to raise or lower (for AC) the setting at 5 degrees.

• For gas fuelled units, make sure that the gas supply and the power light is turned on.

The above tips will help you keep the home heating and cooling

system at peak performance. Be sure to follow the steps and you

will enjoy a trouble-free unit.

When it comes to HVAC experts,

Air Conditioning Repair New Braunfels

is the name you can trust.

They offer repairs, maintenance, installation, and

all types of Heating and Cooling New Braunfels

services.

www.heatingandcoolingsanantonio.com