Web Server Free Bsd

WebServer FreeBSD 7.2

WebServer FreeBSD 7.2 Page 1

§ WebServer FreeBSD 7.2 §www.mu-ph.org

Email: [email protected] 2552

* * * * * * * * * Objective:

WebServer WebSite 5 GBytes

SpecificationsCPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1995.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Ram 2G HardDisk IDE 500G 250

500G / , swap /backups 250G /var , /tmp , /usr /usr/local

Lan card 1 (onboard) partion

www# df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad5s1a 507630 146844 320176 31% / devfs 1 1 0 100% /dev /dev/ad7s1g 400913540 16644420 352196038 5% /backups /dev/ad7s1e 1012974 12 931926 0% /tmp /dev/ad7s1f 10154158 1150928 8190898 12% /usr /dev/ad5s1d 231978828 4 213420518 0% /usr/local /dev/ad7s1d 60931274 1066 56055708 0% /var www#

1.2. Compile Kernel Firewall Quota3. Update ports tree4. Firewall5. Quota6. mysql50-server7. Apache228. PHP59. PHP5-extensions10. ZendOptimizer11. webmin12. phpmyadmin13. vsftp14. awstats15. ntp16. clamav17. hostsentry18. portsentry19. lynx20. phpbb321. denyhosts22. Backup



1).

http://bsd.psru.ac.th/microcom/micro240/install53_1.pdfhttp://bsd.psru.ac.th/microcom/micro240/install53_2.pdf

FreeBSD 7.2

login as: sermpan Using keyboard-interactive authentication. Password:Last login: Mon Aug 10 11:02:38 2009 from proxy.mu-ph.org Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved.

FreeBSD 7.2-RELEASE (GENERIC) #0: Fri May 1 08:49:13 UTC 2009

Welcome to FreeBSD!

Before seeking technical support, please use the following resources:

o Security advisories and updated errata information for all releases are at http://www.FreeBSD.org/releases/ - always consult the ERRATA section for your release first as it's updated frequently.

o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and, along with the mailing lists, can be searched by going to http://www.FreeBSD.org/search/. If the doc distribution has been installed, they're also available formatted in /usr/share/doc.

If you still have a question or problem, please take the output of `uname -a', along with any relevant error messages, and email it as a question to the [email protected] mailing list. If you are unfamiliar with FreeBSD's directory layout, please refer to the hier(7) manual page. If you are not familiar with manual pages, type `man man'.

You may also use sysinstall(8) to re-enter the installation and configuration utility. Edit /etc/motd to change this login announcement.

$ su root Password:www#

Welcome Delay 10 3

www# vi /boot/defaults/loader.conf

################################################################# Loader settings ######################################## ##############################################################

#autoboot_delay="10" # Delay in seconds before autobooting, autoboot_delay="3" # Delay in seconds before autobooting,

sshd_config User sermpan Secure Shell

www# vi /etc/ssh/sshd_config

# Authentication:

AllowUsers sermpan

#LoginGraceTime 2m #PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10

Save Reload

www# /etc/rc.d/sshd reload www#



2). Compile Kernel Firewall Quotawww# cd /usr/src/sys/i386/conf/ www# cp GENERIC PH www# vi PH ; ( )www# cat PH ## GENERIC -- Generic kernel configuration file for FreeBSD/i386 ## For more information on this file, please read the handbook section on # Kernel Configuration Files: ## http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html ## The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. ## An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. ## $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.15.2.1 2008/11/25 02:59:29 kensmith Exp $

cpu I486_CPU cpu I586_CPU cpu I686_CPU #ident GENERIC ident PH

# To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices.

makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols

options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT # Security event auditing



#options KDTRACE_HOOKS # Kernel DTrace hooks ## Add Firewall & Quota to kernel #options IPFIREWALL options IPFIREWALL_FORWARD options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=120 options IPDIVERT options QUOTA ## End of Additional Line #......

www# pwd /usr/src/sys/i386/confwww# ll total 82 -rw-r--r-- 1 root wheel 13 Jun 20 2005 .cvsignore -rw-r--r-- 1 root wheel 534 Apr 15 10:14 DEFAULTS -rw-r--r-- 1 root wheel 12472 Apr 15 10:14 GENERIC -rw-r--r-- 1 root wheel 1745 Apr 15 10:14 GENERIC.hints -rw-r--r-- 1 root wheel 1034 Apr 15 10:14 MAC -rw-r--r-- 1 root wheel 131 Apr 15 10:14 Makefile -rw-r--r-- 1 root wheel 38891 Apr 15 10:14 NOTES -rw-r--r-- 1 root wheel 2016 Apr 15 10:14 PAE -rw-r--r-- 1 root wheel 12786 Aug 12 16:51 PH-rw-r--r-- 1 root wheel 3539 Apr 15 10:14 XBOX www# config PH Kernel build directory is ../compile/PH Don't forget to do ``make cleandepend && make depend'' www# cd ../compile/PH www# make depend ; make ; make install ...===> zyd (install) install -o root -g wheel -m 555 if_zyd.ko /boot/kernel install -o root -g wheel -m 555 if_zyd.ko.symbols /boot/kernel kldxref /boot/kernel www#

Reboot

www# reboot



3). Update ports tree

FreeBSD 7.2 Update ports

login as: sermpan Using keyboard-interactive authentication. Password:Last login: Tue Aug 4 20:03:36 2009 from proxy.mu-ph.org Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved.

FreeBSD 7.2-RELEASE (PH) #0: Tue Aug 4 18:53:55 ICT 2009

Welcome to FreeBSD!





You may also use sysinstall(8) to re-enter the installation and configuration utility. Edit /etc/motd to change this login announcement.$ su root Password:www#

FreeBSD 7.2 tar /backups/distfiles72.tar

/usr/ports/distfiles ( Server download internet)www# cd / www# tar xpf /backups/distfiles72.tar www# cd /usr/ports/net/cvsup www# make install && make clean

cvsup X11 ( default) library X11

compile Fatal error



libiconv default

libxslt MEM_DEBUG



python25 THREADS, UCS4, PYMALLOC, FPECTL

perl DEBUGGING, GDBM, PERL_MALLLOC, PERL_64BITINT, THREADS, SUIDPERL, USE_PERL



m4 LIBSIGSEGV

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/sbin/cvsupd/usr/local/bin/cvsup/usr/local/bin/cvpasswd

If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern.

For more information, and contact details about the security status of this software, see the following webpage: http://www.cvsup.org/===> Cleaning for ezm3-1.2_1 ===> Cleaning for liboldX-1.0.1 ===> Cleaning for libdmx-1.0.2_1 ===> Cleaning for pixman-0.15.2 ===> Cleaning for libXaw-1.0.5_1,1 ===> Cleaning for gmake-3.81_3 ===> Cleaning for libX11-1.2.1,1 ===> Cleaning for libtool-1.5.26 ===> Cleaning for pkg-config-0.23_1 ===> Cleaning for xextproto-7.0.5 ===> Cleaning for dmxproto-2.2.2 ===> Cleaning for libXext-1.0.5,1 ===> Cleaning for perl-threaded-5.8.9_2 ===> Cleaning for printproto-1.0.4 ===> Cleaning for libXau-1.0.4 ===> Cleaning for libXmu-1.0.4,1 ===> Cleaning for libXp-1.0.0,1 ===> Cleaning for libXpm-3.5.7 ===> Cleaning for xproto-7.0.15 ===> Cleaning for libXt-1.0.5_1 ===> Cleaning for gettext-0.17_1 ===> Cleaning for libxcb-1.2_1 ===> Cleaning for xorg-macros-1.2.1 ===> Cleaning for bigreqsproto-1.0.2 ===> Cleaning for xcmiscproto-1.1.2 ===> Cleaning for xtrans-1.2.3 ===> Cleaning for kbproto-1.0.3 ===> Cleaning for inputproto-1.5.0 ===> Cleaning for xf86bigfontproto-1.1.2 ===> Cleaning for libXdmcp-1.0.2_1 ===> Cleaning for automake-1.10.1



===> Cleaning for autoconf-2.62 ===> Cleaning for gdbm-1.8.3_3 ===> Cleaning for libSM-1.1.0_1,1 ===> Cleaning for libiconv-1.11_1 ===> Cleaning for libcheck-0.9.6 ===> Cleaning for libxslt-1.1.24_2 ===> Cleaning for xcb-proto-1.4 ===> Cleaning for libpthread-stubs-0.1 ===> Cleaning for python25-2.5.4_1 ===> Cleaning for automake-wrapper-20071109 ===> Cleaning for m4-1.4.12,1 ===> Cleaning for help2man-1.36.4_2 ===> Cleaning for autoconf-wrapper-20071109 ===> Cleaning for libICE-1.0.4_1,1 ===> Cleaning for libxml2-2.7.3 ===> Cleaning for libsigsegv-2.5 ===> Cleaning for p5-gettext-1.05_2 ===> Cleaning for cvsup-16.1h_4 www#

www#

ports-supfile /tmp port Update

www# cp /usr/share/examples/cvsup/ports-supfile /tmp www# cd /tmp www# ll total 14 drwxrwxrwt 2 root wheel 512 Aug 7 09:50 .ICE-unix drwxrwxrwt 2 root wheel 512 Aug 7 09:50 .X11-unix drwxrwxrwt 2 root wheel 512 Aug 7 09:50 .XIM-unix drwxrwxrwt 2 root wheel 512 Aug 7 09:50 .font-unix drwxrwxr-x 2 root operator 512 Aug 7 15:58 .snap -r--r--r-- 1 root wheel 3817 Aug 7 10:10 ports-supfile www#

ports-supfile ( )

www# cat ports-supfile

# $FreeBSD: src/share/examples/cvsup/ports-supfile,v 1.38.6.1 2008/11/25 02:59:29 kensmith Exp $ ## This file contains all of the "CVSup collections" that make up the # FreeBSD-current ports collection. ## CVSup (CVS Update Protocol) allows you to download the latest CVS # tree (or any branch of development therefrom) to your system easily # and efficiently (far more so than with sup, which CVSup is aimed # at replacing). If you're running CVSup interactively, and are # currently using an X display server, you should run CVSup as follows # to keep your CVS tree up-to-date: ## cvsup ports-supfile ## If not running X, or invoking cvsup from a non-interactive script, then # run it as follows: ## cvsup -g -L 2 ports-supfile ## You may wish to change some of the settings in this file to better # suit your system: ## host=CHANGE_THIS.FreeBSD.org # This specifies the server host which will supply the # file updates. You must change it to one of the CVSup # mirror sites listed in the FreeBSD Handbook at # http://www.freebsd.org/doc/handbook/mirrors.html. # You can override this setting on the command line # with cvsup's "-h host" option. ## base=/var/db # This specifies the root where CVSup will store information # about the collections you have transferred to your system. # A setting of "/var/db" will generate this information in



# /var/db/sup. You can override the "base" setting on the # command line with cvsup's "-b base" option. This directory # must exist in order to run CVSup. ## prefix=/usr # This specifies where to place the requested files. A # setting of "/usr" will place all of the files requested # in "/usr/ports" (e.g., "/usr/ports/devel", "/usr/ports/lang"). # The prefix directory must exist in order to run CVSup.

# Defaults that apply to all the collections ## IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. #*default host=CHANGE_THIS.FreeBSD.org *default host=cvsup1.FreeBSD.org *default base=/var/db *default prefix=/usr *default release=cvs tag=. *default delete use-rel-suffix

# If you seem to be limited by CPU rather than network or disk bandwidth, try # commenting out the following line. (Normally, today's CPUs are fast enough # that you want to run compression.) *default compress

## Ports Collection. ## The easiest way to get the ports tree is to use the "ports-all" # mega-collection. It includes all of the individual "ports-*" # collections, #ports-all

# These are the individual collections that make up "ports-all". If you # use these, be sure to comment out "ports-all" above. ## Be sure to ALWAYS cvsup the ports-base collection if you use any of the # other individual collections below. ports-base is a mandatory collection # for the ports collection, and your ports may not build correctly if it # is not kept up to date. ports-baseports-accessibility#ports-arabicports-archivers#ports-astro#ports-audio#ports-benchmarks#ports-biology#ports-cad#ports-chineseports-commsports-convertersports-databases#ports-deskutilsports-develports-dns#ports-editorsports-emulators#ports-finance#ports-frenchports-ftp#ports-games#ports-germanports-graphics#ports-hebrew#ports-hungarian#ports-irc#ports-japaneseports-java#ports-koreanports-langports-mail#ports-math



#ports-mboneports-misc#ports-multimediaports-netports-net-imports-net-mgmtports-net-p2p#ports-news#ports-palm#ports-polishports-ports-mgmt#ports-portugueseports-print#ports-russian#ports-scienceports-securityports-shellsports-sysutilsports-textproc#ports-ukrainian#ports-vietnameseports-wwwports-x11ports-x11-clocksports-x11-driversports-x11-fmports-x11-fontsports-x11-serversports-x11-themesports-x11-toolkitsports-x11-wm

www# /usr/local/bin/cvsup -g -L 2 /tmp/ports-supfile Parsing supfile "/tmp/ports-supfile" Connecting to cvsup1.FreeBSD.org Connected to cvsup1.FreeBSD.org Server software version: SNAP_16_1h Negotiating file attribute support Exchanging collection information Establishing multiplexed-mode data connection Running

Name lookup failure for "cvsup1.FreeBSD.org": Host name lookup failed Will retry at 11:56:55

ports-supfile

*default host=cvsup1.FreeBSD.org

cvsup1 1 2 3 4 18

http://www.freebsd.org/doc/en/books/handbook/cvsup.html#CVSUP-MIRRORS

www# /usr/local/bin/cvsup -g -L 2 /tmp/ports-supfile Parsing supfile "/tmp/ports-supfile"

cvsup2.freebsd.org

.

.

.

.Shutting down connection to server Finished successfullywww#



4). Firewall

Compile kernel Firewall Quota Firewall

Step # 1: Enabling IPFW

Open /etc/rc.conf file

firewall_enable="YES"firewall_script="/backups/ipfw.rules"

Step # 2 Write a Firewall Rule Script

www# vi /backups/ipfw.rules

IPF="ipfw -q add" ipfw -q -f flush

#loopback$IPF 10 allow all from any to any via lo0 $IPF 20 deny all from any to 127.0.0.0/8 $IPF 30 deny all from 127.0.0.0/8 to any $IPF 40 deny tcp from any to any frag

# statefull $IPF 50 check-state $IPF 60 allow tcp from any to any established $IPF 70 allow all from any to any out keep-state $IPF 80 allow icmp from any to any

# open port ftp (20,21), ssh (22), mail (25) # http (80), dns (53) etc

# port 20 = ftp-data #$IPF 90 allow tcp from any to any 20 in #$IPF 100 allow tcp from any to any 20 out

# port 21 = ftp $IPF 110 allow tcp from any to any 21 in $IPF 120 allow tcp from any to any 21 out

# port 22 = ssh $IPF 130 allow tcp from any to any 22 in $IPF 140 allow tcp from any to any 22 out

# telnet port=23 #$IPF 150 allow tcp from any to any 23 in #$IPF 160 allow tcp from any to any 23 out

# smtp port=25 #$IPF 170 allow tcp from any to any 25 in #$IPF 180 allow tcp from any to any 25 out

# nameserver port=42 #$IPF 190 allow tcp from any to any 42 in #$IPF 200 allow tcp from any to any 42 out

# domain port=53 #$IPF 210 allow udp from any to any 53 in #$IPF 220 allow udp from any to any 53 out

# tftp port=69 #$IPF 230 allow tcp from any to any 69 in #$IPF 240 allow tcp from any to any 69 out



# finger port=79 #$IPF 250 allow tcp from any to any 79 in #$IPF 260 allow tcp from any to any 79 out

# http port=80 $IPF 270 allow tcp from any to any 80 in $IPF 280 allow tcp from any to any 80 out

# pop3 port=110 #$IPF 290 allow tcp from any to any 110 in #$IPF 300 allow tcp from any to any 110 out

# webmin port=10000 $IPF 310 allow tcp from any to any 10000 in $IPF 320 allow tcp from any to any 10000 out

# deny and log everything $IPF 500 deny log all from any to any

Step # 3: Start a firewall

You can reboot the box or you could reload these rules by entering on the command line.

www# sh /backups/ipfw.rules

Task: List all the rules in sequence

Type the following command:

www# ipfw list 00010 allow ip from any to any via lo0 00020 deny ip from any to 127.0.0.0/8 00030 deny ip from 127.0.0.0/8 to any 00040 deny tcp from any to any frag 00050 check-state 00060 allow tcp from any to any established 00070 allow ip from any to any out keep-state 00080 allow icmp from any to any 00110 allow tcp from any to any dst-port 21 in 00120 allow tcp from any to any dst-port 21 out 00130 allow tcp from any to any dst-port 22 in 00140 allow tcp from any to any dst-port 22 out 00270 allow tcp from any to any dst-port 80 in 00280 allow tcp from any to any dst-port 80 out 00310 allow tcp from any to any dst-port 10000 in 00320 allow tcp from any to any dst-port 10000 out 00500 deny log logamount 120 ip from any to any 65535 allow ip from any to anywww#

quota



5). Quota

www# cd /etc/ www# vi fstab

/usr userquota,groupquota

www# cat fstab # Device Mountpoint FStype Options Dump Pass# /dev/aacd0s1b none swap sw 0 0 /dev/aacd0s1a / ufs rw 1 1 /dev/aacd1s1d /backups ufs rw 2 2 /dev/aacd0s1e /tmp ufs rw 2 2 /dev/aacd0s1f /usr ufs rw,userquota,groupquota 22 /dev/aacd0s1d /var ufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0www#

/etc/rc.conf

enable_quotas="YES"check_quotas="YES"

Reboot

www# reboot

boot Disk Quota

www# quotacheck -a www# quotaon -a www# quota -v sermpan Disk quotas for user sermpan (uid 1002): Filesystem usage quota limit grace files quota limit grace /usr/local 0 0 0 0 0 0 www# www# edquota -u sermpan Quotas for user sermpan: /usr/local: kbytes in use: 0, limits (soft = 1044480, hard = 1048576) inodes in use: 1, limits (soft = 0, hard = 0) www#

SoftQuota = 1020M HardQuota = 1024M

www# quota -v sermpan Disk quotas for user sermpan (uid 1003): Filesystem usage quota limit grace files quota limit grace /usr/local 1520 1044480 1048576 1 0 0 www#

grace period 7

www# edquota -t Time units may be: days, hours, minutes, or seconds Grace period before enforcing soft limits for users: /var/mail: block grace period: 7 days, file grace period: 7 days

Quota User

www# edquota -p sermpan `awk -F: '$3 > 1003 {print $1}' /etc/passwd` www#



6.) mysql50-server

www# cd /usr/ports/database/mysql50-server www# make config ===> No options to configurewww# make WITH_CHARSET=tis620 WITH_XCHARSET=all WITH_COLLATION=tis620_thai_ci WITH_OPENSSL=yes BUILD_OPTIMIZED=yes WITH_ARCHIVE=yes WITH_FEDERATED=yes WITH_NDB=yes install clean

( www# make with )

Added group "mysql". Added user "mysql". ************************************************************************

Remember to run mysql_upgrade (with the optional --datadir=<dbdir> flag) the first time you start the MySQL server after an upgrade from an earlier version.

************************************************************************install-info --quiet /usr/local/info/mysql.info /usr/local/info/dir ===> Installing rc.d startup script(s) ===> Compressing manual pages for mysql-server-5.0.84 ===> Registering installation for mysql-server-5.0.84 ===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/bin/ndb_drop_table/usr/local/bin/ndb_delete_all/usr/local/libexec/ndbd/usr/local/bin/ndb_restore/usr/local/libexec/ndb_mgmd/usr/local/bin/ndb_select_all/usr/local/bin/ndb_drop_index/usr/local/bin/ndb_desc/usr/local/bin/ndb_show_tables/usr/local/lib/mysql/libndbclient.so.2/usr/local/bin/ndb_waiter/usr/local/libexec/mysqld/usr/local/libexec/ndb_cpcd/usr/local/bin/ndb_select_count

This port has installed the following startup scripts which may cause these network services to be started at boot time. /usr/local/etc/rc.d/mysql-server


For more information, and contact details about the security status of this software, see the following webpage: http://www.mysql.com/===> Cleaning for mysql-client-5.0.84 ===> Cleaning for mysql-server-5.0.84

www#

mysql

www# vi /etc/rc.conf

mysql_enable="YES"

save vi reboot

www# reboot



reboot login password login database

login as: sermpan Password:Last login: Thu Aug 6 15:08:09 2009 from 202.129.37.133 Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994 The Regents of the University of California. All rights reserved.

FreeBSD 7.2-RELEASE (NMM) #0: Thu Aug 6 13:11:38 ICT 2009

Welcome to FreeBSD!





You may also use sysinstall(8) to re-enter the installation and configuration utility. Edit /etc/motd to change this login announcement.

$ su root Password:www# /usr/local/bin/mysqladmin -u root password ppppp www# mysql -u root mysql -p Enter password: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A

Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 2 Server version: 5.0.84 FreeBSD port: mysql-server-5.0.84

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> \qByewww#

mysql apache22



7.) Apache22

www# cd /usr/ports/www/apache22 www# make config





www# make install clean

arp-ipv6-gdbm-db42

To run apache www server from startup, add apache22_enable="YES"in your /etc/rc.conf. Extra options can be found in startup script.

Your hostname must be resolvable using at least 1 mechanism in /etc/nsswitch typically DNS or /etc/hosts or apache might have issues starting depending on the modules you are using. ===> Installing rc.d startup script(s) ===> Compressing manual pages for apache-2.2.11_7 ===> Registering installation for apache-2.2.11_7 ===> SECURITY REPORT: This port has installed the following binaries which execute with increased privileges. /usr/local/sbin/suexec

This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/libexec/apache22/mod_cgid.so

This port has installed the following startup scripts which may cause



these network services to be started at boot time. /usr/local/etc/rc.d/apache22/usr/local/etc/rc.d/htcacheclean


For more information, and contact details about the security status of this software, see the following webpage: http://httpd.apache.org/===> Cleaning for expat-2.0.1 ===> Cleaning for pcre-7.9 ===> Cleaning for apr-gdbm-db42-ndbm-mysql-1.3.8.1.3.9 ===> Cleaning for automake-1.9.6_3 ===> Cleaning for db42-4.2.52_5 ===> Cleaning for apache-2.2.11_7 www#

apache


apache22_enable="YES"

save vi



8.) PHP5

www# cd /usr/ports/lang/php5 www# make config


***************************************************************

Make sure index.php is part of your DirectoryIndex.

You should add the following to your Apache configuration file:

AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps

***************************************************************===> Compressing manual pages for php5-5.2.10 ===> Registering installation for php5-5.2.10 ===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/libexec/apache22/libphp5.so/usr/local/bin/php/usr/local/bin/php-cgi


For more information, and contact details about the security status of this software, see the following webpage: http://www.php.net/===> Cleaning for php5-5.2.10 www#

php5-extensions



9.) PHP5-extensions

www# cd /usr/ports/lang/php5-extensions www# make config






...

curl

c-ares-config



ca_root_nss

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/lib/libcurl.so.5


For more information, and contact details about the security status of this software, see the following webpage: http://curl.haxx.se/===> Cleaning for c-ares-config-1.6.0 ===> Cleaning for libidn-1.14 ===> Cleaning for libssh2-1.1,2 ===> Cleaning for ca_root_nss-3.11.9_2 ===> Cleaning for curl-7.19.5_1 www#

php5-extensions Apache PHP /usr/local/etc/apache22/Include

www# cd /usr/local/etc/apache22/Includes

php5.conf vi

www# vi php5.conf

DirectoryIndex index.php AddDefaultCharset tis-620 AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps Include etc/apache22/extra/httpd-ssl.conf

save vi

php.ini

www# cd /usr/local/etc/ www# cp php.ini-recommended php.ini



php.ini

default_charset = "tis-610" # ; session.save_path = "/tmp/sesstmp" # ; /tmp/sesstmp /tmp chmod 777 /tmp/sesstmp

Generate Cert apache HTTPS

www# cd /usr/local/etc/apache22/ www# openssl genrsa -out server.key 1024 Generating RSA private key, 1024 bit long modulus .++++++.......++++++e is 65537 (0x10001) www# openssl req -new -days 365 -key server.key -out server.csr You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. -----Country Name (2 letter code) [AU]:THState or Province Name (full name) [Some-State]:BangkokLocality Name (eg, city) []:RajchavithiOrganization Name (eg, company) [Internet Widgits Pty Ltd]:Faculty of Public Health, Mahidol UniversityOrganizational Unit Name (eg, section) []:Computer DivisionCommon Name (eg, YOUR name) []:ComputerEmail Address []:[email protected]

Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []:ppppppppAn optional company name []:PHwww# openssl x509 -in server.csr -out server.crt -req -signkey server.key -days 365 Signature ok subject=/C=TH/ST=Bangkok/L=Rajchavithi/O=Faculty of Public Health, Mahidol University/OU=Computer Division/CN=Computer/[email protected] Private key www# chmod 400 server.* www#

apache


apache22_enable="YES"

save vi reboot

www# reboot

php

www# cd /usr/local/www/apache22/data www# echo "<?PHP phpinfo();?>" > info.php



browser http://www.mu-ph.org/index.html

http://www.mu-ph.org/info.php



10). ZendOptimizer

www# cd /usr/ports/devel/ZendOptimizer www# make config ===> No options to configure www# make install clean

********************************************************************************

You have installed the ZendOptimizer package.

Edit /usr/local/etc/php.ini and add:

[Zend]zend_optimizer.optimization_level=15zend_extension_manager.optimizer="/usr/local/lib/php/20060613/Optimizer"zend_extension_manager.optimizer_ts="/usr/local/lib/php/20060613/Optimizer_TS"zend_extension="/usr/local/lib/php/20060613/ZendExtensionManager.so"zend_extension_ts="/usr/local/lib/php/20060613/ZendExtensionManager_TS.so"

NOTE: PHP should be compiled in non-debug mode (default).

********************************************************************************===> Registering installation for ZendOptimizer-3.3.0.a ===> Cleaning for compat6x-i386-6.4.604000.200810 ===> Cleaning for ZendOptimizer-3.3.0.a www#

/usr/local/etc/php.ini

restart apache

www# /usr/local/etc/rc.d/apache22 restart Performing sanity check on apache22 configuration: Syntax OK Stopping apache22. Waiting for PIDS: 704. Performing sanity check on apache22 configuration: Syntax OK Starting apache22. www#



11.) webmin

www# cd /usr/ports/sysutils/webmin/ www# make config ===> No options to configure www# make install clean

After installing Webmin for the first time you should perform the following steps as root:

* Configure Webmin by running ${LOCALBASE}/lib/webmin/setup.sh

* Add webmin_enable="YES" to your /etc/rc.conf

* Start Webmin for the first time by running ${LOCALBASE}/etc/rc.d/webmin

The parameters requested by setup.sh may then be changed from within Webmin itself.

===> Installing rc.d startup script(s) ===> Registering installation for webmin-1.480_1 ===> Cleaning for p5-Net-SSLeay-1.35_1 ===> Cleaning for p5-Authen-PAM-0.16_1 ===> Cleaning for p5-MIME-Base64-3.08 ===> Cleaning for webmin-1.480_1 www#

setup webmin

www# /usr/local/lib/webmin/setup.sh ************************************************************************ Welcome to the Webmin setup script, version 1.480 * ***********************************************************************Webmin is a web-based interface that allows Unix-like operating systems and common Unix services to be easily administered.

Installing Webmin in /usr/local/lib/webmin ...

***********************************************************************Webmin uses separate directories for configuration files and log files. Unless you want to run multiple versions of Webmin at the same time you can just accept the defaults.

Log file directory [/var/log/webmin]:

***********************************************************************Webmin is written entirely in Perl. Please enter the full path to the Perl 5 interpreter on your system.

Full path to perl (default /usr/bin/perl):

Testing Perl ... Perl seems to be installed ok

***********************************************************************Operating system name: FreeBSD Operating system version: 7.2

***********************************************************************Webmin uses its own password protected web server to provide access to the administration programs. The setup script needs to know : - What port to run the web server on. There must not be another web server already using this port. - The login name required to access the web server. - The password required to access the web server. - If the webserver should use SSL (if your system supports it). - Whether to start webmin at boot time.

Web server port (default 10000): Login name (default admin): admin Login password: Password again: Use SSL (y/n): y ***********************************************************************Creating web server config files.. ..done

Creating access control file.. ..done

Creating start and stop scripts..



..done

Copying config files.. ..done

Changing ownership and permissions .. ..done

Running postinstall scripts .. syslog-ng: not found ..done

www#

Start webmin

www# /usr/local/etc/rc.d/webmin start Starting webmin. Pre-loaded WebminCore www#

port 10000 error ssl

https://www.mu-ph.org:10000 ( Click link )



login Click Server Apache WebServer

Search apache Enter Apache 41 Click Column Module Apache Webserver

Click Apache Webserver

webmin httpd.conf Click module configuration ( Highlight )

22 /usr/local/etc/apache22 save



refresh Click Server Apache Webserver

config apache webmin ( )



12.) phpmyadmin

www# cd /usr/ports/database/phpmyadmin/ www# make config


php5-pcre



php5-gd

php5-mbstring

****************************************************************************

The following line has been added to your /usr/local/etc/php/extensions.ini configuration file to automatically load the installed extension:

extension=mysqli.so

****************************************************************************===> Returning to build of phpMyAdmin-3.2.0.1 ===> phpMyAdmin-3.2.0.1 depends on shared library: mysqlclient.15 - found ===> Generating temporary packing list ===> Checking if databases/phpmyadmin already installed

phpMyAdmin-3.2.0.1 has been installed into:

/usr/local/www/phpMyAdmin

Please edit config.inc.php to suit your needs.

To make phpMyAdmin available through your web site, I suggest



that you add something like the following to httpd.conf:

Alias /phpmyadmin/ "/usr/local/www/phpMyAdmin/"

<Directory "/usr/local/www/phpMyAdmin/"> Options none AllowOverride Limit

Order Deny,Allow Deny from all Allow from 127.0.0.1 .example.com </Directory>

===> Registering installation for phpMyAdmin-3.2.0.1 ===> Cleaning for php5-ctype-5.2.10 ===> Cleaning for php5-mysql-5.2.10 ===> Cleaning for php5-session-5.2.10 ===> Cleaning for php5-spl-5.2.10 ===> Cleaning for php5-filter-5.2.10 ===> Cleaning for php5-bz2-5.2.10 ===> Cleaning for php5-gd-5.2.10 ===> Cleaning for php5-openssl-5.2.10 ===> Cleaning for pecl-pdflib-2.1.6_1 ===> Cleaning for php5-zlib-5.2.10 ===> Cleaning for php5-mbstring-5.2.10 ===> Cleaning for php5-zip-5.2.10 ===> Cleaning for php5-mysqli-5.2.10 ===> Cleaning for php5-pcre-5.2.10 ===> Cleaning for php5-simplexml-5.2.10 ===> Cleaning for freetype2-2.3.9_1 ===> Cleaning for png-1.2.38 ===> Cleaning for jpeg-7 ===> Cleaning for t1lib-5.1.2_1,1 ===> Cleaning for pdflib-7.0.4 ===> Cleaning for phpMyAdmin-3.2.0.1

www#

vi /usr/local/etc/apache22/httpd.conf

Alias /admin/phpMyAdmin/ "/usr/local/www/phpMyAdmin/"

<Directory "/usr/local/www/phpMyAdmin/"> Options none AllowOverride Limit

Order Deny,Allow Allow from all </Directory>

restart apache

wwv# /usr/local/etc/rc.d/apache22 restart Performing sanity check on apache22 configuration: Syntax OK Stopping apache22. Waiting for PIDS: 1595. Performing sanity check on apache22 configuration: Syntax OK Starting apache22. www#

/usr/local/www/phpMyadminwww# cd /usr/local/www/phpMyAdmin/ www# cp config.sample.inc.php config.inc.php www# vi config.inc.php

$cfg['blowfish_secret'] = 'mysecret'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH!

*//

/* Advanced phpMyAdmin features */ $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin';



$cfg['Servers'][$i]['bookmarktable'] = 'pma_bookmark'; $cfg['Servers'][$i]['relation'] = 'pma_relation'; $cfg['Servers'][$i]['table_info'] = 'pma_table_info'; $cfg['Servers'][$i]['table_coords'] = 'pma_table_coords'; $cfg['Servers'][$i]['pdf_pages'] = 'pma_pdf_pages'; $cfg['Servers'][$i]['column_info'] = 'pma_column_info'; $cfg['Servers'][$i]['history'] = 'pma_history'; $cfg['Servers'][$i]['designer_coords'] = 'pma_designer_coords';

/* Contrib / Swekey authentication */ $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf';

http://www.mu-ph.org/admin/phpMyAdmin/

warning mcrypt php5-extensions mcrypt Compile

root password mysql50-server

phpMyAdmin database config database text mode



13.) vsftp

www# cd /usr/ports/ftp/vsftp/ www# make config

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/libexec/vsftpd

This port has installed the following startup scripts which may cause these network services to be started at boot time. /usr/local/etc/rc.d/vsftpd


For more information, and contact details about the security status of this software, see the following webpage: http://vsftpd.beasts.org/===> Cleaning for vsftpd-ssl-2.1.2 www#

vsftpd.conf

www# cd /usr/local/etc/ www# vi vsftp.conf

# Example config file /usr/local/etc/vsftpd.conf ## The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. ## READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. ## Allow anonymous FTP? (Beware - allowed by default if you comment this out). #anonymous_enable=YESanonymous_enable=NO## Uncomment this to allow local users to log in. #local_enable=YESlocal_enable=YES## Uncomment this to enable any form of FTP write command.



#write_enable=YESwrite_enable=YES## Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022local_umask=022## Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YESanon_upload_enable=YES## Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YESanon_mkdir_write_enable=YES## Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES## Activate logging of uploads/downloads. xferlog_enable=YES## Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES## If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES#chown_username=whoeverchown_uploads=YESchown_username=ftp## You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log## If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES## You may change the default value for timing out an idle session. #idle_session_timeout=600## You may change the default value for timing out a data connection. #data_connection_timeout=120## It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecurenopriv_user=ftp## Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES## By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES#ascii_download_enable=YES## You may fully customise the login banner string:



#ftpd_banner=Welcome to blah FTP service. ftpd_banner=Welcome to MU-PH FTP service. ## You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YESdeny_email_enable=NO# (default follows) #banned_email_file=/etc/vsftpd.banned_emails## You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES# (default follows) #chroot_list_file=/etc/vsftpd.chroot_list## You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES## When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=NO## This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YESsecure_chroot_dir=/usr/local/share/vsftpd/empty

# If using vsftpd in standalone mode, uncomment the next two lines: # listen=YES # background=YES

www# vi /etc/inetd.conf#ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l ftp stream tcp nowait root /usr/local/libexec/vsftpd vsftpd /usr/local/etc/vsftpd.conf

www# killall inetd No matching processes were found www# /usr/sbin/inetd -wW www# ftp localhost Trying 127.0.0.1... Connected to localhost. 220 Welcome to MU-PH FTP service. Name (localhost:sermpan): 331 Please specify the password. Password:230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 229 Entering Extended Passive Mode (|||34230|). 150 Here comes the directory listing. 226 Directory send OK. ftp> quit 221 Goodbye. www#

inetd_enable=”YES” /etc/rc.conf

ftp upload/Download server



14.) awstats

www# cd /usr/ports/www/awstats/ www# make config


*****************************************************************Please add the following to your apache config, and restart.

## Directives to allow use of AWStats as a CGI #Alias /awstatsclasses "/usr/local/www/awstats/classes/" Alias /awstatscss "/usr/local/www/awstats/css/" Alias /awstatsicons "/usr/local/www/awstats/icons/" ScriptAlias /awstats/ "/usr/local/www/awstats/cgi-bin/"

## This is to permit URL access to scripts/files in AWStats directory. #<Directory "/usr/local/www/awstats/"> Options None AllowOverride None Order allow,deny Allow from all </Directory>

*****************************************************************

If you are upgrading from AWStats 6.4 or older, please note the following:

If you used the geoip plugin, you must edit your AWStats config file to change the line LoadPlugin="geoip GEOIP_STANDARD" into LoadPlugin="geoip GEOIP_STANDARD /pathto/GeoIP.dat"

*****************************************************************===> Registering installation for awstats-6.9,1 ===> Cleaning for p5-Net-XWhois-0.90_4 ===> Cleaning for awstats-6.9,1 www#



vi /usr/local/etc/apache22/httpd.conf

restart apache


awstats.conf

www# cd /usr/local/www/awstats/cgi-bin/ www# ll total 648 -r-xr-xr-x 1 root wheel 5407 Jul 20 15:11 awredir.pl -r--r--r-- 1 root wheel 60596 Jul 20 15:11 awstats.model.conf -r-xr-xr-x 1 root wheel 558260 Jul 20 15:11 awstats.pl drwxr-xr-x 5 root wheel 1536 Jul 20 15:11 lang drwxr-xr-x 2 root wheel 512 Jul 20 15:11 lib drwxr-xr-x 3 root wheel 512 Jul 20 15:11 plugins www# cp awstats.model.conf awstats.conf www# vi awstats.conf

#LogType=W#SiteDomain="www.mu-ph.org"#HostAliases="www.mu-ph.org localhost 127.0.0.1 REGEX[myserver\.com$]" #AllowToUpdateStatsFromBrowser=1

http://www.mu-ph.org/awstats/awstats.pl

click update error

Error: Couldn't open server log file "/var/log/httpd/mylog.log" : No such file or directory

Setup ('/usr/local/www/awstats/cgi-bin/awstats.conf' file, web server or permissions)may be wrong.Check config file, permissions and AWStats documentation (in 'docs' directory).

www# mkdir /var/log/httpd www# touch /var/log/httpd/mylog.log www#

refresh



15.) ntp

www# cd /usr/ports/net/ntp www# make config ===> No options to configure www# make install clean

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/bin/ntpd/usr/local/bin/ntpdate/usr/local/bin/sntp


For more information, and contact details about the security status of this software, see the following webpage: http://www.ntp.org/===> Cleaning for ntp-4.2.4p7 www#

NTP crontabwww# crontab –e

0 5 * * * /usr/local/bin/ntpdate –u 203.185.69.60

update

www# date Wed Aug 12 21:39:00 ICT 2009 www# /usr/local/bin/ntpdate -u 203.185.69.6012 Aug 21:39:15 ntpdate[70368]: adjust time server 203.185.69.60 offset 0.393085 sec www# date Wed Aug 12 21:39:17 ICT 2009 www#



16). clamav

www# cd /usr/ports/security/clamav www# make config

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/sbin/clamd

This port has installed the following startup scripts which may cause these network services to be started at boot time. /usr/local/etc/rc.d/clamav-milter/usr/local/etc/rc.d/clamav-freshclam/usr/local/etc/rc.d/clamav-clamd


For more information, and contact details about the security status of this software, see the following webpage: http://www.clamav.net/===> Cleaning for arc-5.21o_1 ===> Cleaning for arj-3.10.22_1 ===> Cleaning for lha-1.14i_6 ===> Cleaning for unzoo-4.4_2 ===> Cleaning for clamav-0.95.2 www#

/etc/rc.conf

clamav_clamd_enable="YES"clamav_freshclam_enable="YES"

/usr/local/etc/clamav.conf

LogFile /var/log/clamav/clamd.log PidFile /var/run/clamav/clamd.pid TemporaryDirectory /tmp DatabaseDirectory /var/db/clamav LocalSocket /var/run/clamav/ clamd.sock FixStaleSocket yes User clamav AllowSupplementaryGroups yes ScanPE yes ScanOLE2 yes ScanPDF yes ScanHTML yes



ScanArchive yes

crontab –e Virus site clamav scan web

www# crontab –e 0 6 * * * /sbin/reboot 0 5 * * * /usr/local/bin/ntpdate -u 203.185.69.60 2 * * * * /usr/local/bin/freshclam –quiet 0 1 * * * /usr/local/bin/clamscan -r -i /usr/local/www 10 11 * * * /etc/webmin/cron/tempdelete.pl

Clamav updatewww# /usr/local/etc/rc.d/clamav-freshclam start Starting clamav_freshclam. www# /usr/local/etc/rc.d/clamav-clamd start Starting clamav_clamd. LibClamAV Warning: ************************************************** LibClamAV Warning: *** The virus database is older than 7 days! *** LibClamAV Warning: *** Please update it as soon as possible. *** LibClamAV Warning: ************************************************** www#

clamav update

www# /usr/local/bin/freshclam ClamAV update process started at Wed Aug 12 21:46:54 2009 main.cvd is up to date (version: 51, sigs: 545035, f-level: 42, builder: sven) WARNING: getfile: daily-9451.cdiff not found on remote server (IP: 193.1.193.64) WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net Trying host database.clamav.net (130.59.10.36)... WARNING: getfile: daily-9451.cdiff not found on remote server (IP: 130.59.10.36) WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net WARNING: getpatch: Can't download daily-9451.cdiff from database.clamav.net WARNING: Incremental update failed, trying to download daily.cvd Downloading daily.cvd [100%] daily.cvd updated (version: 9684, sigs: 64237, f-level: 43, builder: ccordes) Database updated (609272 signatures) from database.clamav.net (IP: 130.59.10.36) Clamd successfully notified about the update. www# /usr/local/bin/freshclam ClamAV update process started at Wed Aug 12 21:48:03 2009 main.cvd is up to date (version: 51, sigs: 545035, f-level: 42, builder: sven) daily.cvd is up to date (version: 9684, sigs: 64237, f-level: 43, builder: ccordes) www#

scan directory scan sub-directory virus

www# /usr/local/bin/clamscan -r -i /usr/local/www

----------- SCAN SUMMARY ----------- Known viruses: 608632 Engine version: 0.95.2 Scanned directories: 67 Scanned files: 1563 Infected files: 0 Data scanned: 29.52 MB Data read: 12.02 MB (ratio 2.46:1) Time: 7.825 sec (0 m 7 s)www#



17). hostsentry

www# cd /usr/ports/security/hostsentry www# make config ===> No options to configure www# make install clean

Edit /usr/local/etc/hostssentry/hostssentry.conf and change your settings if you haven't already. ===> Registering installation for hostsentry-0.02_2 ===> Cleaning for py25-gdbm-2.5.4 ===> Cleaning for hostsentry-0.02_2 www#

www# cd /usr/local/etc/hostsentry/ www# ll total 10 -rw------- 1 root wheel 49 Aug 11 21:31 hostsentry.action-dist -rw------- 1 root wheel 2767 Aug 11 21:31 hostsentry.conf-dist -rw------- 1 root wheel 67 Aug 11 21:31 hostsentry.ignore-dist -rw------- 1 root wheel 135 Aug 11 21:31 hostsentry.modules-dist www# cp hostsentry.action-dist hostsentry.action www# cp hostsentry.conf-dist hostsentry.conf www# cp hostsentry.ignore-dist hostsentry.ignore www# cp hostsentry.modules-dist hostsentry.modules www# ll total 20 -rw------- 1 root wheel 49 Aug 11 21:33 hostsentry.action -rw------- 1 root wheel 49 Aug 11 21:31 hostsentry.action-dist -rw------- 1 root wheel 2767 Aug 11 21:33 hostsentry.conf -rw------- 1 root wheel 2767 Aug 11 21:31 hostsentry.conf-dist -rw------- 1 root wheel 67 Aug 11 21:34 hostsentry.ignore -rw------- 1 root wheel 67 Aug 11 21:31 hostsentry.ignore-dist -rw------- 1 root wheel 135 Aug 11 21:34 hostsentry.modules -rw------- 1 root wheel 135 Aug 11 21:31 hostsentry.modules-dist www#



18). portsentry

www# cd /usr/ports/security/portsentry www# make config ===> No options to configure www# make install clean

Edit ${PREFIX}/etc/portsentry.conf and change your settings if you haven't already. (route, etc)

*************************************************** * IGNORE stealth mode. It is for Linux only. * * The author hopes to have a platform independent * * version at some time. So don't even bother * * trying it now. * ***************************************************

===> Registering installation for portsentry-1.2 ===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/bin/portsentry

This port has installed the following startup scripts which may cause these network services to be started at boot time. /usr/local/etc/rc.d/portsentry.sh

If there are vulnerabilities in these programs there may be a security risk to the system. FreeBSD makes no guarantee about the security of ports included in the Ports Collection. Please type 'make deinstall' to deinstall the port if this is a concern. ===> Cleaning for portsentry-1.2www#

www# cd /usr/local/etc/www# cp portsentry.conf.default portsentry.conf www# cp portsentry.ignore.default portsentry.ignore www# touch portsentry.blocked www# touch portsentry.history



19). lynx

www# cd /usr/ports/ www/lynx-current www# make config ===> No options to configure www# make install clean

===> SECURITY REPORT: This port has installed the following files which may act as network servers and may therefore pose a remote security risk to the system. /usr/local/bin/lynx


For more information, and contact details about the security status of this software, see the following webpage: http://lynx.isc.org/current/===> Cleaning for mime-support-3.46.1 ===> Cleaning for lynx-2.8.7d13 www#

www# /usr/local/bin/lynx www.mu-ph.org



20). phpbb3

www# cd /usr/ports/www/phpbb3 www# make config ===> No options to configure www# make install clean

----------------------------------------------------------------------------phpBB3 has been installed, but is not quite ready to be used yet!

You have to ensure that you have a database server (or ODBC access to a remote database) installed and configured, and you have to ensure that your PHP installation has been compiled with support for your database or database access method. You have to create a database for phpBB3 to use, and ensure that this database may be accessed and changed by the user id under which your web server executes. Further information on these installation procedures may be found in:

/usr/local/share/doc/phpbb/README.html

Once these steps have been taken, you may connect to the following URL to configure your installation of phpBB3:

http://localhost/phpBB3/

After configuring phpBB3 and ensuring that it is operational, you MUST remove or rename the install/ directory from /usr/local/www/phpBB3:

----------------------------------------------------------------------------===> Registering installation for phpbb-3.0.5 ===> Cleaning for phpbb-3.0.5 www#www# cd /usr/local/www/ www# ll total 10 drwxr-xr-x 6 root wheel 512 Aug 12 19:37 apache22 drwxr-xr-x 8 root wheel 512 Aug 12 21:29 awstats drwxr-xr-x 13 www www 1024 Aug 12 22:02 phpBB3 drwxr-xr-x 10 root wheel 2560 Aug 12 21:05 phpMyAdmin www# mv phpBB3/ forum/ www# ll total 10 drwxr-xr-x 6 root wheel 512 Aug 12 19:37 apache22 drwxr-xr-x 8 root wheel 512 Aug 12 21:29 awstats drwxr-xr-x 13 www www 1024 Aug 12 22:02 forum drwxr-xr-x 10 root wheel 2560 Aug 12 21:05 phpMyAdmin www#

httpd.conf

www# vi /usr/local/etc/apache22/httpd.conf

Alias /mambers/forum/ "/usr/local/www/forum/"

<Directory "/usr/local/www/forum/"> Options none AllowOverride Limit

Order Deny,Allow Allow from all </Directory>

run apache




http://www.mu-ph.org/members/forum/

config WebBoard



21). denyhosts

www# cd /usr/ports/security/denyhosts www# make config ===> No options to configure www# make install clean -------------------------------------------------------------------------------To run denyhosts from startup, add denyhosts_enable="YES"in your /etc/rc.conf. Configiration options can be found in /usr/local/etc/denyhosts.conf -------------------------------------------------------------------------------In order to proper working of denyhosts 1. edit your /etc/hosts.allow file and add: sshd : /etc/hosts.deniedssh : deny sshd : ALL : allow 2. issue the following command if /etc/hosts.deniedssh does not exist yet touch /etc/hosts.deniedssh -------------------------------------------------------------------------------Warning:

syslogd should ideally be run with the -c option; this will ensure that denyhosts notices multiple repeated login attempts.

To do this, add syslogd_flags="-c" to /etc/rc.conf -------------------------------------------------------------------------------===> Installing rc.d startup script(s) ===> Registering installation for denyhosts-2.6_2 ===> Cleaning for denyhosts-2.6_2 www#

/usr/local/etc/denyhosts.conf

SECURE_LOG = /var/log/auth.log HOSTS_DENY = /etc/hosts.allow PURGE_DENY = 7dBLOCK_SERVICE = sshd HOSTNAME_LOOKUP=YESADMIN_EMAIL = [email protected]

denyhosts crontab –e

0,20,40 * * * * /usr/local/bin/python /usr/local/bin/denyhosts.py -c /usr/local/etc/denyhosts.conf



22). Backup ( )

www# cd /backups/ www# mkdir /backups/last-full www# date +%d%b > /backups/last-full/www-full-date www# mkdir /usr/local/util www# vi backups.sh

#!/bin/sh

#backup database cd /usr/local/util mysqldump phpBB3 > phpBB3.sql --password=ppppppp

#backup passwd & group cp /etc/passwd* . cp /etc/group* . cp /etc/master* .

#backup conf cp /etc/rc.conf . cp /usr/local/etc/apache22/httpd.conf . cp /usr/local/etc/apache22/Includes/php5.conf . cp /usr/local/etc/php.ini . cp /etc/resolv.conf .

# Full and incremental backup script# Updated 04 July 2002# Based on a script by Daniel O'Callaghan <[email protected]># and modified by Gerhard Mourani <[email protected]># Change the 5 variables below to fit your computer/backupCOMPUTER=www # Name of this computerDIRECTORIES="/usr/local" # Directory to backupBACKUPDIR=/backups # Where to store the backupsTIMEDIR=/backups/last-full # Where to store time of full backupTAR=/usr/bin/tar # Name and location of tar# You should not have to change anything below herePATH=/usr/local/bin:/usr/bin:/binDOW=`date +%a` # Day of the week e.g. MonDOM=`date +%d` # Date of the Month e.g. 27DM=`date +%d%b` # Date and Month e.g. 27 Sep# On the 1st of the month a permanet full backup is made# Every Sunday a full backup is made - overwriting last Sundays backup# The rest of the time an incremental backup is made. Each incremental# backup overwrites last weeks incremental backup of the same name.## if NEWER = "", then tar backs up all files in the directories# otherwise it backs up files newer than the NEWER date. NEWER# gets it date from the file written every Sunday.# Monthly full backupif [ $DOM = "01" ]; then NEWER="" $TAR $NEWER -cf $BACKUPDIR/$COMPUTER-$DM.tar $DIRECTORIESfi# Weekly full backupif [ $DOW = "Sun" ]; then NEWER="" NOW=`date +%d-%b` # Update full backup date echo $NOW > $TIMEDIR/$COMPUTER-full-date $TAR $NEWER -cf $BACKUPDIR/$COMPUTER-$DOW.tar $DIRECTORIES# Make incremental backup - overwrite last weekselse # Get date of last full backup NEWER="--newer `cat $TIMEDIR/$COMPUTER-full-date`" $TAR $NEWER -cf $BACKUPDIR/$COMPUTER-$DOW.tar $DIRECTORIESfi

#remove passwd & group

cd /usr/home/util rm -f passwd* rm -f group* rm -f master*

crontab –e

0 4 * * * /backups/backups.sh



backup

[sermpan@www backupsw]$ ll -h total 5.4G -rw-r--r-- 1 root root 2.6K Jun 18 08:46 backups.sh -rwx------ 1 root root 2.2K Apr 17 12:01 backups.sh.org* drwxr-xr-x 2 root root 80 Apr 17 11:58 last-full/ -rw-r--r-- 1 root root 17M Aug 7 04:02 www-Fri.tar -rw-r--r-- 1 root root 6.6M Aug 10 04:02 www-Mon.tar -rw-r--r-- 1 root root 150M Aug 8 04:02 www-Sat.tar -rw-r--r-- 1 root root 5.2G Aug 9 04:05 www-Sun.tar -rw-r--r-- 1 root root 16M Aug 6 04:02 www-Thu.tar -rw-r--r-- 1 root root 7.3M Aug 11 04:02 www-Tue.tar -rw-r--r-- 1 root root 7.8M Aug 12 04:02 www-Wed.tar [sermpan@www backupsw]$

Backup Full backup


12 2552

Self Improvement

Web Server Free Bsd