Click here to load reader
Upload
hellenll
View
54
Download
0
Embed Size (px)
DESCRIPTION
This tutorial on building your own necklace features a stone, the very trendy turquoise bead, plus two types of anti-bronze chain, tiger tail wire and two lobster claw clasps. Super easy and fun!
Citation preview
Stone Jewelry Making - Build Your Own Statement Necklace
Building your own necklace can be rewarding, and
sometimes worthwhile and amusing. Turquoise is
naturally one of my favorite materials to work with.
Jewelry making out of such kind of stones can be
tailored to your taste as well as any trendy
stylishness.
strand Turquoise bead
Anti-bronze (2 types) chain
Jumpring
Crimp Bead
Lobster Claw Clasp
0.5mm Tiger Tail Wire
Side Cutting Pliers
Round Nose Pliers
Flat Nose Pliers
How to build the turquoise necklace?
Step 1: Create the focal beaded strand
1st, cut a 40cm long piece of wire, pass through the
jumpring and pull the two ends to be equal;
2nd, slide a crimp bead. Push up and clamp near the
jumpring;
3rd, string five selected turquoise beads;
4th, orderly add a crimp bead and a jumpring on the
other end. Take the wire to go back through the
crimp bead, pull the wire snugly and squeeze the
crimp bead. Trim off the excess wire and that’s the
focal stone part.
This tutorial on building your own necklace features a stone, the very trendy turquoise bead, plus two
types of anti-bronze chain, tiger tail wire and two lobster claw clasps. Super easy and fun!
Supplies needed in the stone necklace:
Congratulations!
You’re done now. Admire it and then wear it or pass
it on to others. All friends and family will love the
way you built your own necklace very much! Be
aware of all episodes in life and let them provide
inspirations!
Shop for jewelry tools for your handcraft making, welcome to visit our webpage at:
http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html
Step 2: Prepare the decorative
chain strands
1st, take two strands of thinner chain,
measuring 18cm and 28cm long;
2nd, attach a clasp on two ends of chain strands,
with a jumpring.
Step 3: Build your own necklace
1st, measure the required length needed for
the thicker chain;
2nd, cut the needed chain and mark its center;
3rd, on one end of the beaded strand, open the
jumpring and hook the center chain link. Then
close it off;
4th, on the other end, open the jumpring and
hook the last link on two ends. Close the
jumpring as before;
After that you’ll see the semi-finished
necklace as below:
5th, lift the chain adornment, open the two
lobster clasps and attach to the beaded strand.