TM DISTO LASER DISTANCE METER SERIES

TM

For Indoor & Outdoor Construction

PRECISE. RELIABLE. ACCURATE

(TM) DISTO LASER DISTANCE METER SERIESFor Indoor & Outdoor Construction

TM

ww

w.s

tan

lay.

in

PRECISE. RELIABLE. ACCURATE

• MEASURE DISTANCES AT THE TOUCH OF A BUTTON - EVEN WHEN

WORKING ON YOUR OWN.

• LASERS WITH ACCURACY OPTIONS OF 1, 1.5 & 2.0MM UNBEATABLE

RELIABILITY SITE PROOF INSTRUMENTS.

• OPTIONS FOR BASIC OR PROFESSIONAL

INDOOR & OUTDOOR USAGE.

Switzerland

In Association with :

TM

LASER DISTANCE METER SERIESPrecision Distance Measurement

PRODUCT SELECTION GUIDE

Choose The Product That Right For Your Application.

Specifications :

Range 0.1~30m 0.05 ~70m 0.05– 60 m 0.05– 100 m 0.05–200 m 0.05-200 mDistance measurements including area,volume and continuous measurementAddition and subtraction of distances,areas and volumesIndirect height and distance measurementto inaccessible placesAutomatic calculation of room dimensionse.g. wall and ceiling areasMeasurement of tilts ± 45° ± 45° 360°Measure horizontal distances,even past obstaclesTarget far-off objects in very bright conditionsusing the digital PointfinderMeasurement of roof slopesand facade areasMeasure heights withouta reflection pointDetermine spot heights and ground profilesData transmission by BLUETOOTH®FUNCTIONSmart Horizontal Mode™Min / max measurementContinuous measurementAddition / subtractionArea / volume measurementsPythagoras functionsRoom dimensionsHorizontal distanceTrapezium measurementsIndirect measurements using tilt sensorProtection Class IP 65 IP 65 IP 54 IP 54 IP 54

X2 DXT D2 D3a D5 D8

IP 54

IN & OUTDOORSMAINLY INDOORS

TM

WAY OF MEASUREMENT

LASER DISTANCE METER X2Precision Distance Measurement Upto 30 Meters

Basic laser distance meter for use by architects, valuers, interior designers, construction professionals and enthusiasts.

Description :

• Ultra compact design : Pocket sized unit, small & light.• Precise and reliable : Measure up to 30.5 meters with +/- 3mm accuracy.• Highly visible laser dot for quick & precise on the spot measurements.• Measure distances, area and volumes for material estimates.• Determine placement and fit for room furnishings and cabinetry.• Measure windows and window covering.• Measure hallways, rooms, ceiling heights and floors for floor covering.• Measure in attics and crawlspaces for running wire or insulation and duct work.• Pythagoras functions - Calculate distance, height or width, measure two sides of a

triangle and it calculates the third.

Features :

Specifications :

Operating Principle LaserOperating Range 4”(10cm) to 100’(30.5m)Accuracy 3mm (1/8”)Automatic power off: After 180 secondsPower Supply Type 2 x AAA BatteryBattery Life Up to 3000 measurementsSize 123 x 50 x 26 mmWeight 100g (with battery)Temperature range :Operation 0°C to +40°C (32°F to 104°F)Environmental IP65, Splash & dust proofItem Code LDM X2

TM

• Basic measurements

• Accurate • Economical

LASER DISTANCE METER DXTPrecision Distance Measurement Upto 70 Meters

Professional compact laser distance meter for indoor construction & engineering.

Description :

• Smallest Laser Distance Meter on the market : Thanks to its ergonomic and compact design with soft grip, the LDM D60 sits securely in your hand, is lightweight and fits into any pocket.

• LCD Illuminated Display : Easily readable, even in the dark, thanks to the illuminated display.

• Tracking & Continous Measurement : Minimum/maximum measurements make your work easier.

• Storage : Store upto 10 readings.• Timer : Program the instrument to measure with time delay of 5 to 60 seconds.• Pythagoras Function : Measure indirect height & width measurements at in accessible positions.• Flip Out End Piece : Measure from corners or edges.•

•

•

Robust : The sensitive measuring elements are protected by solid rubber parts. The Stanlay Laser Distance Meter DXT is therefore particularly resistant.IP 65 : The housing and keypad are specially sealed against water and dust. Cleaning under running water is also no problem.Multifunctional end-piece : Whether measuring out of corners, slots or from edges, with this endpiece you are prepared for all measuring situations. The instrument detects the endpiece automatically, which helps you avoid expensive measuring errors.

Features :

Indirect MeasurementSpecifications :

Operating Principle LaserOperating Range 0.05m to 70mAccuracy 1.5mmAutomatic power off:Laser After 60 secondsInstrument After 180 secondsPower Supply Type 2 x AAA BatteryBattery Life Up to 5000 measurementsSize 123 x 55 x 28 mmWeight 159gTemperature range :Storage -25°C to +70°COperation 0°C to +40°CEnvironmental IP65, Splash & dust proofSealed keypad For measurements inextremely dusty environments.

Easy to clean under running water.Solid rubber housing Withstands drop tests from 2 m heightItem Code LDM DXT

TM

TM

LASER DISTANCE METER D2Precision Distance Measurement Upto 60 Meters

Professional compact laser distance meter for indoor construction & engineering.

Description :

Specifications :

Operating Principle LaserOperating Range 0.05m to 60mAccuracy 1.5mmDisplay LCD, 3Line, IlluminatedLowest Indication Unit 1mmMemory Upto 10 readingsAutomatic power off:Laser After 60 secondsInstrument After 180 secondsPower Supply Type 2 x AAA BatteryBattery Life Up to 5000 measurementsSize 111 x 43 x 23 mmWeight 90 gTemperature range :Storage -25°C to +70°COperation 0°C to +40°CEnvironmental IP54, Splash & dust proofItem Code ST-LDM D2

• Smallest Laser Distance Meter on the market : Thanks to its ergonomic and compact design with soft grip, the LDM D60 sits securely in your hand, is lightweight and fits into any pocket.

• LCD Illuminated Display : Easily readable, even in the dark, thanks to the illuminated display.• Tracking & Continous Measurement : Minimum/maximum measurements make your work easier.• Storage : Store upto 10 readings.• Timer : Program the instrument to measure with time delay of 5 to 60 seconds.• Pythagoras Function : Measure indirect height & width measurements at in accessible positions.• Flip Out End Piece : Measure from corners or edges.• Direct Keys : Quick results by a key press.

Features :

LASER DISTANCE METER D3aPrecision Distance Measurement Upto100 Meters

• Precision at the touch of a button : For everyone who needs to be really accurate: D100 has an accuracy of ± 1.0 mm.

• Tilt measurement : Using the integrated tilt sensor you can quickly determine tilts up to ± 45°.

• Smart Horizontal Mode™ : Thanks to the combination of distance and tilt measurements you can determine the horizontal distance absolutely precisely and simply – even past obstructions.

• Standard function include Timer, Illuminated LCD Display, 20 readings memory, Continuous measurement including Min/Max, Area/Volume function & Pythagoras functions.

Features :

Tilt Measurement Horizontal Measurement Stake Out Function

TM

Indirect Measurement

TM

Specifications :

Distance measurements:Measuring accuracy up to 10 m (2 σ, standard deviation) typically: ± 1.0 mm*Power Range Technology™: Range (use target plate from about 80m) 0.05 m to 100 mSmallest unit displayed 0.1 mmDistance measurementMinimum/Maximum measurement, Continuous measurementArea/Volume calculation of room dataAddition/subtractionIndirect measurement using PythagorasTilt Measurement :Tilt Sensor Accuracy (2 σ, standard deviation)- to laser beam ±0.3°- to the housing ±0.3°Horizontal measurementIndirect measurement using tilt sensor (direct horizontal distance)Angle measurement using tilt sensor (±45°)General :Laser class IILaser type 635nm, <1mWØ laser point (at distances) 6/30/60 mm (10 / 50 / 100 m)Autom. laser switch-off after 3 minAutom. instrument switch-off after 6 minDisplay IlluminationKeypad IlluminationMultifunctional endpieceTimer (self-triggering)Save constant valueHistorical storage 20 valuesTripod threadPower Supply Type AAA, 2 x 1.5V BatteryBattery life up to 5000 measurementEnvironmental IP54, Splash & dust proofSize 127 x 49 x 27.3 mmWeight (with batteries) 149gTemperature rangeStorage -25°C up to +70°C

(-13°F up to + 158°F)Operation -10°C up to + 50°C

(14°F up to + 122°F)Item Code ST-LDM D3a

EXCLUSIVE FEATURES

LASER DISTANCE METER & D5 D8

The Perfect way to achieve your measurement goals.

TM

Single Pythagoras Measurement :Just two measurements are enough to indirectly calculate thehorizontal or vertical distances. It is important to ensure the2nd measurement is at right angles to the target object – easywith minimum measurements.

Indirect Pythagoras Measurement :

Double Pythagoras Measurement :Using a tripod you can measure horizontal and vertical distances. The Leica DISTO™ determines the results for you out of three measurements. Functions such as minimum and maximum measurement help you find the correct measuring point.

Double Pythagoras Measurement (Chain Values) :With just three measurements, you can also determine partialheights, e.g. balcony or window heights. This is, of course,possible horizontally and vertically.

TM

Indirect Measurement With The Tilt Sensor :

Tilt Measurement :The tilt sensor of the Leica DISTO™ D5 measures inclinations of up to ± 45° and the DISTO™ D8 has a measuring range of 360°. That means with this device even overhead inclinations can be measured. This is especially interesting when determining roof slopes.

Horizontal Distance :The tilt measurement allows you to determine the desired horizontal distance, even if the object cannot be directly targeted. This is particularly useful when obstructions like walls or hedges stand in the line of sight.

Height Measurement Without Reflective Points :Building or tree elevations that don’t provide suitable reflection points can be determined with the dual tilt measurement. Point with the laser to the lower target of the requested height and trigger a distance and tilt measurement. Then direct the digital Point finder on the upper target and carry out a tilt measurement.

Roof Slope :With this function you can, for example, measure a roof slopeof a house from long range distances as well. For this you needto carry out two distance measurements, at which the LeicaDISTO™ also simultaneously determines the tilt. The final resultis automatically calculated from this measurement.

Altitude Profile Measurement :Measure a known reference mark with the device and then measure from each of the relevant altitude differences. When the measuring points have all been recorded in one direction you can then determine a cross-country tread with the measured horizontal distance and the height difference.

TM

Trapezium Function :The trapezium function is used to quickly and safely determine roof slopes and frontage areas, for example. You only need to take three measurements, and the result appears on the display.

Special functions :

Trapezium Function With Tilt Sensor :If access to the object to be measured is limited and measurements can only be taken from one position, then this is no problem – thanks to the integral tilt sensor. This trapezium function can also be used to quickly and safely determine roof slopes and frontage areas.

Triangle Function :The triangle function helps you quickly and efficiently to arrive at the area of a multi-cornered room. Divide the room into imaginary triangles. Then use three measurements to determine the areas of each of the triangles, which you can add together as you proceed. Finally all you have to do is read off the result.

Stake Out Function :Two different distances (A and B) can be entered in the device and then be used to mark off defined measured lengths. At each measured length, the display shows the current marking distance and a direction arrow. Additionally, an alarm signal starts to ring at a distance of 0,1 m from the next stake out point.

LASER DISTANCE METER D5Precision Distance Measurement Upto 200 Meters

TM

• Strong outdoor performer : The in-built digital Point finder with 4x zoom makes aiming at long distances much easier. You can even carry out measurements in glaring sunlight.

• Display in digital point finder mode on Large Colour graphics Display The high image resolution provides a clear, sharp picture of the target directly on the display.

• Integral tilt sensor : Using the tilt sensor you can also take indirect measurements. From this the horizontal distance can be derived inspite of obstructions.

Features :

Tilt Sensor Digital Pointfinder Power Range Technology

Spot-on Measurement Trapezium Function Trapezium Function with Tilt Sensor

Triangle Function

Specifications :

Distance measurements:Measuring accuracy up to 10 m (2 σ, standard deviation) typically: ± 1.0 mm*Power Range Technology™: Range (use target plate from about 80m) 0.05 m to 200 mSmallest unit displayed 0.1 mmDistance measurementMinimum/Maximum measurement, Continuous measurementArea/Volume calculation of room dataAddition/subtractionIndirect measurement using PythagorasTilt Measurement :Tilt Sensor Accuracy (2 σ, standard deviation)- to laser beam ±0.3°- to the housing ±0.3°Horizontal measurementIndirect measurement using tilt sensor (direct horizontal distance)Angle measurement using tilt sensor (±45°)General :Laser class IILaser type 635nm, <1mWØ laser point (at distances) 6/30/60 mm (10 / 50 / 100 m)Autom. laser switch-off after 3 minAutom. instrument switch-off after 6 minDisplay IlluminationKeypad IlluminationMultifunctional endpieceTimer (self-triggering)Save constant valueHistorical storage 20 valuesTripod threadPower Supply Type AA, 2 x 1.5V BatteryBattery life up to 5000 measurementEnvironmental IP54, Splash & dust proofSize 143.5 x 55 x 30 mmWeight (with batteries) 195gTemperature rangeStorage -25°C up to +70°C

(-13°F up to + 158°F)Operation -10°C up to + 50°C

(14°F up to + 122°F)Item Code ST-LDM D5

TM

Single Pythagoras Measurement

Double Pythagoras Measurement

Horizontal Distance Stake Out Function Tilt MeasurementDouble Pythagoras Measurement (Chain Values)

LASER DISTANCE METER D8Precision Distance Measurement Upto 200 Meters

• Strong outdoor performer : The in-built digital Point finder with 4x zoom makes aiming at long distances much easier. You can even carry out measurements in glaring sunlight.

• Display in digital point finder mode on Large Colour graphics Display The high image resolution provides a clear, sharp picture of the target directly on the display.

• Integral tilt sensor : Using the tilt sensor you can also take indirect measurements. From this the horizontal distance can be derived inspite of obstructions.

• 360° tilt sensor : The combination of angle and distance measurements allows you to determine distances where conventional methods fail.

• Error-free data transfer : BLUETOOTH® and the supplied “Stanlay Transfer” software ensure that data transfer to pocket PCs and PCs is quick and error-free. The simple way to enter your results into Excel®, Word®, AutoCAD® and other programs for further processing.

• Strong outdoor performer : Measure long distances simply and quickly thanks to the digital Point finder with its 4x zoom and high resolution colour display.

Features :

Indirect Measurement Trapezium Function Trapezium Function with Tilt Sensor

Triangle Function

TM

360° Tilt Sensor Digital Pointfinder Power Range Technology Free Software

Specifications :

Distance measurements:Measuring accuracy up to 10 m (2 σ, standard deviation) typically: ± 1.0 mm*Power Range Technology™: Range (use target plate from about 80m) 0.05 m to 200 mSmallest unit displayed 0.1 mmDistance measurementMinimum/Maximum measurement, Continuous measurementArea/Volume calculation of room dataAddition/subtractionIndirect measurement using PythagorasTilt Measurement :Tilt Sensor Accuracy (2 σ, standard deviation)- to laser beam -0.1°/ +0.2°- to the housing ±0.1°Horizontal measurementIndirect measurement using tilt sensor (direct horizontal distance)Angle measurement using tilt sensor (±45°)General :Laser class IILaser type 635nm, <1mWØ laser point (at distances) 6/30/60 mm (10 / 50 / 100 m)Autom. laser switch-off after 3 minAutom. instrument switch-off after 6 minDisplay IlluminationKeypad IlluminationMultifunctional endpieceTimer (self-triggering)Save constant valueHistorical storage 20 valuesTripod threadPower Supply Type AA, 2 x 1.5V BatteryBattery life up to 5000 measurementEnvironmental IP54, Splash & dust proofSize 143.5 x 55 x 30 mmWeight (with batteries) 205gTemperature rangeStorage -25°C up to +70°C

(-13°F up to + 158°F)Operation -10°C up to + 50°C

(14°F up to + 122°F)Item Code ST-LDM D8

TM

Single Pythagoras Measurement

Double Pythagoras Measurement

Horizontal Distance Stake Out Function Tilt MeasurementAltitude Profile Measurement

Height Measurementwithout Reflective Points

Double Pythagoras Measurement (Chain Values)

TM

Regd. Office:Asian Contec Ltd.Asian Centre, B-28, Okhla Industrial Area, Phase-1, New Delhi -110020, India.

Contact Nos. : Tel : +91-11-41860000 (100 Lines) Direct Sales Helpline : +91-11-41406926 Fax : +91-11-41860066Web : www.stanlay.in email: sales@stanlay.com

Works :Asian Contec Ltd. 44A Export Promotion Industrial Park-1, Jharmajari, Baddi, Himachal Pradesh, India

Regional Offices :• Hyderabad • Ahmadabad

Catalogue Version : STUDG 2011/01

TM

Professional

Grade

Products

Best In Class

Warranty

Programmes

TM

Product &

Service

Training

TM

ww

w.s

tan

lay.

in