Conquer the world with Palmar

( CTWP )

Group 6Chat 5818030Wina 5718037

Uses:1. Can be used as a shelf for books or a ledge.2. To encourage kids to be organised .3. For decoration.4. Can also be used as a storage bar.5. Provides additional spots for your accessories and equipments when you don't have enough space.

CTWP

Materials and tools used Machines usedAngle bracket Belt sanderHammer Sewing machineJigsaw Infrared OvenWire Vacuum surge tank Knots and Fasteners Grinding machineCotton Drill pressLeather Router machinePolypropylene plasticPlaster of ParisCast cutter ( Oscillation Blade )Velcro ( Hook and Loop )AdhesiveDrive punchesGloves

37%

29%

13%

8%

3%

Percentage of Fabrication process

Thermoforming and trimming Casting and modification Fastening and Finishing Sewing Leather miscellaneous

CTWP

Plaster Casting

Modi-fication

Thermo forming

Gliding

Sewing Leather

Fastening and

Finishing

Fabrication process

Fab·ri·ca·tion the action or process of manufacturing or inventing something.

1.Plaster casting• Casting by POP, water: plaster = 1:2• Casted onto the right hand and left hand

each on both subjects.

2.Modification• Positive and negative model• Measured from the head of ulnar

Fabrication process

Before Thermoforming…- Cutting and Gliding.( For Socket )

3. Thermoforming

a manufacturing process where a plastic sheet is heated to a specific temperature, for the formation of a particular shape. It is then trimmed to create a usable product.

- Specific temperature 170- 185 Degree Celsius, for polypropylene plastic.

After Thermoforming…

= Result

Cast cutter

trimmming

First cut and then Grind the plastic by using Sanding drum and felt cone. ( For the board )

4. Gliding

5. Leather and sewing.- Use wire and cotton to make flexible gloves.- Velcro strap

6. Fastening and finishing- Usage of contact adhesive.- Knots and fasteners.

Attach the angle bracket to the socket, by fasteners and knots.

Problems and Solutions, during fabrication process.

Mold and cast two arms of the same person/subject, instead of molding one side of arm ; for easy work process.

In order to make this specific DIY project model faster and easier ; we should make use of a cone or cylindrical shaped object for the arm, instead of using measurements of human arm. This could have saved a lot of time.

Recommendation for future work…

Thank you

• https://en.wikipedia.org/wiki/Thermoforming

References:

• http://www.diyncrafts.com/7517/home/40-brilliant-diy-shelves-will-beautify-home

• www.sme.org/WorkArea/DownloadAsset.aspx?id=73749

Font :

Times new roman 24