Upload
bestlaminate-inc
View
5.118
Download
2
Embed Size (px)
DESCRIPTION
This illustrated guide will show you with detailed step-by-step pictures how to install Provent Silent Vapor 3-in-1 Flooring Underlayment. (Available here: http://bit.ly/1rIppgX)
Citation preview
How to install provent silent vapor 3-in-1 flooring underlayment
DIY & Save Money
You will need: •Enough provent underlayment •Flooring •Broom & Dustpan •Tape •Scissors / Utility Knife
Step 1: Tidy Your Subfloor Clean subfloor so it is free of debris and dirt
Step 2: Subfloor Inspection Make sure the subfloor is level, clean, and dry.
Quick note: Subfloor needs fixing if: •It is sloping •It has excessive gaps •It has cracks •It has any areas with moisture
Step 3: Lets go! Start to roll out underlayment with Kronoswiss logo facing up
Before continuing: Install your underlayment section by section. Your section will be the length of your room.
Step 4: Leave a gap Leave a 1 inch gap between floor strip and wall so air can circulate
Step 5: cut section Cut underlayment with utility knife once section is finished
Acclimate your flooring - Cross stack flooring at least 48 hours before the installation.
Step 6: Install Your Flooring Install flooring on underlayment until a foot of underlayment is left.
Step 7: Unroll Your Next Row Unroll next row of underlayment with overlap facing open room
Step 8: Touching edges Butt edges of underlayment together
Step 9: No overlapping make sure edges are touching but not overlapping
Step 10: Tape your Rows Use tape to secure rows
Step 11: Continue Installation Continue Installing laminate according to manufactures instructions
Connect with us:
www.bestlaminate.com
Facebook.com/Bestlaminate
Twitter.com/Bestlaminate