Upload
mr-ashok-dwivedi
View
219
Download
0
Embed Size (px)
Citation preview
8/2/2019 Polysulphide Sealant
1/2
POURING GRADEDESCRIPTION:
Kankol 625P is a two-part elastomeric sealant
based on a liquid polysulphide polymer which when
mixed with accelerator (curing agent) cures by
chemical reaction to form a tough, flexible rubber
seal. This sealant has excellent Fuel resistance,
adhesion to different substrates like masonry, con-
crete with excellent movement accommodation.
Standards compliance
British Standard BS: 5212:1990-Type FB (Flameand Fuel Resistance) Cold applied Joint Sealant
systems for Concrete pavements.
Ministry of Road Transport and Highway (MORTH)
specification for Roads and Bridge Works Clause
602.2.8 and clause 602.II.4 State that cold applied
two part polysulphide sealant shall meet
BS: 5212:1990.IRMRA certification
KANKOL625p
Phone: 8956117811Fax: (020) 25513367,E-mail: [email protected]
Gat no.72 vill. Dhanore, Markal RD,Alandi Tal. Khed , Pune,Maharastra, India
KANGARU POLYMERS PVT.
TWO- PART POLYSULPHIDE SEALANT
Areas of Application
For sealing and maintenance of horizontal joints in
Aircraft fuelling areas
Oil terminals
Garage forecourts
Concrete Roads
Parking and cargo areas
Warehouses industrial Floors
Features & Benefits
Cold applied
Pourability & self-leveling
UV resistant
Flame and fuelsresistance
Good weatherability
Movement Accommoda-
tion:Butt joints (movement in ten-
sion and compression): 30
%.
Lap Joints (movement in
shear): 50 %
Application InstructionsJoint preparationThe joint surfaces must be clean, dry and free from all con-
tamination. The surfaces should be degreased using the ap-
propriate Cleaner. Primers may be required on some sub-
strates.
Insertion of Backup MaterialsA sui table mater ial is closed cel l, medium densi ty,cross linked Polyethylene foam, strip or rod. Ensure
constant and correct depth of joint.
Masking Tape ApplicationMasking Tape should be used on both sides of the joint to
improve the neatness of the finished seal.
PrimingApply thin film of kankol porous primer on both sides of the
joint with a brush. Allow flash-off of solvent before application
of Sealant i.e. surface should be touch-dry.
MixingThe base and curing agent ratio controls the adhesion,
strength and durability of Kankol 625G.The base and curing agent must therefore be thoroughly
mixed.
ToolingDepth Gauge may be used to recess sealant as specified in
the drawing.
Cleaning
After sealing the joint the tools and equipments should be
cleaned immediately with kerosene or any other cleaning
solvents/thinners.
Health and safety
Avoid prolonged contact with skin. If sealant comes into con-tact with the eyes, flush with cold water and obtain medical
attention.
Storage Life:12 months in original unopened packaging stored in a cool,
dry place out of direct sunlight
Technical SupportKANGARU provides technical advisory service supported by
teams of specialists in the field.
8/2/2019 Polysulphide Sealant
2/2
Use this space to
provide more de-
tailed information
about your products
or services. You can
also include a
graphic of a product
or service.
Lorem ipsum dolor
sit amet, consec-
tetuer adipiscing elit,
sed diem nonummy nibh euismod tin-
cidunt ut lacreet dolore magna aliguam
erat volutpat. Ut wisis enim ad m inim
veniam, quis nostrud exerci tution ul-
lamcorper suscipit lobortis nisl ut aliquip
ex ea commodo consequat. Duis te
feugifacilisi. Duis autem dolor in hendre-
rit in vulputate velit esse molestie con-
sequat, vel illum dolore eu feugiat nulla
facilisis at vero eros et accumsan et
iusto odio dignissim qui blandit praesent
luptatum.
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
List your product or service here
Include description if necessary.
$0.00
Price ListMain InsideHeading
Caption describingpicture or graphic.
Gat no.72 vill. Dhanore, Markal RD,Alandi Tal. Khed , Pune,Maharastra, India
Phone: 8956117811
Fax: (020) 25513367,E-mail: [email protected]
KANGARUPOLYMERS PVT. LTD.