Presented by

Hubble, bubble flooring trouble, Fire burn and cauldron bubble.

Whether you’re a witch with a potion, Or a vampire devoid of emotion.

Your coating can begin to break, As heat and impacts make it flake.

So this Halloween, find the spell, To avoid living in flooring hell.

Read our tips by the lair’s candlesticks, And choose a floor of treats, not tricks.

Discharge static

electricity build up

so that Frankenstein’s

the only one getting

electrocuted!

Antistatic Flooring…Avoiding spine-chilling choices, when establishing an electrostatic protected area (EPA), is essential to ensure that sensitive electronic

components and assemblies are adequately protected from the devilish effects of electrostatic discharge (ESD).

When used in conjunction with suitable footwear, antistatic resinous flooring systems will safely dissipate charge to ground

faster than lightning strikes. These unearthly materials will demonstrate consistent ground readings and low (out-of) body

voltage generation throughout the life of the floor.

Kill the little monsters

on the floor so that

you can focus on the big

ones on your slab.

Hygienic Flooring…Beware the wrath of using tiles or acid brick in your food processing areas or catering kitchen, here nasty mould, bacteria and yeast can

grow in joints and grout lines, penetrating the clean barrier and risking the possibility of contamination within the supply chain.

Hygienic resinous flooring systems that are seamless in nature and contain a supernatural antimicrobial additive designed to reduce bacterial growth in between wash cycles are a hauntingly good choice where hygiene is of paramount importance. Look out for HACCP International certification — a proven mark of quality for

food-grade materials.

Bubbling magic potions

eroding your floor finish?

Make sure your next brew can

resist all the blood and oil caused

by your trouble and toil.

Chemical Resistant Flooring…Thanks to ghastly gravity, sooner or later every nasty will eventually end up on the floor. In gory facilities subject to acids, solvents and

other beastly chemicals — either through prolonged exposure or intermittent spillage — flooring surfaces will quickly weaken if

exposed to corrosive chemicals without adequate protection.

With a little wizardry, resinous flooring systems can be tailored to offer a high-grade of chemical resistance to a number of the hair raising

and highly concentrated chemical compounds used in heavy industry as well as the every day lotions and potions that may be accidentally

spilled on the floor or used in cleaning processes.

You saw what slips and trips did to that witch in Hansel & Gretel! Don’t let it happen to you! Install slip

resistant flooring that enhances traction under foot.

Slip Resistant Flooring…Flooring related slips and trips are a health and safety nightmare in most industrial facilities, institutional buildings and commercial venues as it’s often only a matter of time until a staff member or

visitor suffers a toe curlingly painful accident, which can be frightfully costly for the owners.

With a little hocus pocus, resinous flooring systems can be made up in a wide range of textures and anti-slip profiles, designed to match

the exact service conditions of the otherworldly environment where the flooring will be installed and keep the Grim Reaper at bay

Install a fast curing floor

during the daylight hours so

you can rise in the night to a

completely new finish in your

underground lair.

Fast-Cure Flooring…Call time of death on waiting for resinous flooring systems to cure,

gravely slowing down construction schedules, forcing evil production downtime and preventing early access to follow on trade to the

project site to complete fixtures and fittings.

Spookily fast curing flooring and coating systems - based on methyl methacrylate (MMA) technology - are some of the speediest materials

available, with accelerated curing times that make them ready for foot traffic in as little as one hour. They can even be installed during

the witching hour to keep downtime to a minimum.

Sunlight might make you deteriorate, but fortunately you can make sure that it won’t do anything to your floor.

UV Stable Flooring…Like a vampire exposed to the sunlight withering to dust, a flooring

surface can turn sickeningly yellow over time when exposed to powerful UV rays. Ugly discolouration can be ever more obvious when moving equipment, furniture or coffins to new locations,

leaving unsightly patching and fading on the surface of the floor where they once stood.

Resinous materials can be covered in magic UV resistant seal coats that help to protect the colour integrity of the floor finish -

even when exposed to direct sunlight keeping the floor looking as good as new throughout its life cycle.

www.flowcrete.com

“Flowcrete Group Ltd”allthingsflooring.com

@flowcrete

youtube.com/flowcretetv slideshare.net/flowcrete