FiberStore SFPTransceivers

FiberStore designs, manufactures, and sells abroad portfolio of optical communicationproducts, including passive optical network andoptical transceivers. The optical transceiversinclude SFP, SFP+, XFP and so on. And the SFPtransceiver is the cheapest and most commonlyused version among them.

Then, which types of SFP transceivers does FiberStore supply?

According to the brands, FiberStore's SFP transceivers are divided into two big parts:compatible SFPs and custom SFPs. The compatible SFPs include most famous brands suchas Cisco, HP, Juniper, Dell, Netgear, Extreme, Force10, 3Com, etc.. The custom SFPs can beany type up to the customers’ requirements and own the brand of FiberStore.

According the different parameters and applications, FiberStore's SFP transceivers include100M & 1G SFP, SONET/SDH SFP, 4G SFP, CWDM & DWDM SFP, BIDI SFP, andCopper & SGMII SFP.

100M & 1G SFP

The "100M & 1G SFP" is just a short name of Fast Ethernet & Gigabit Ethernet SFP andsometimes called FE & GE SFP. Fast Ethernet SFP (100BASE-X) is a hot-swappable input/outputdevice that plugs into a Fast Ethernet port or slot, linking the port with the network, while GigabitEthernet SFP transceivers are designed to use with Gigabit networks. They are all compliant toIEEE 802.3 standards and have different types to fit for 1000Base-SX, LX/LH, EX, ZX and1000Base-T applications. FiberStore provides a complete range of FE & GE SFP modules withthe features below.

FEATURES

Compliant with SFP MSA and SFF-8472

Class 1 Laser International Safety Standard IEC-60825 Compliant

3.3 V operating voltage

Compatible with RoHS

Digital diagnostic monitor are selectable

SONET/SDH SFP

FiberStore's multi-rate 2.67Gbps transceivers integrate optics and electronics in a SFP. These SFPmodules are compatible with the SONET/SDH and ATM standards, and provide a fully OC-48SONET compliant interface between the SONET/SDH photonic layer and the electrical layer.Although optimized for OC-48/STM-16, the SONET/SDH SFP modules provide multi-ratecapabilities and can be used from OC-3/STM-1 (155 Mbps) up to 2.67Gbps. For example, theycan support OC-3/STM-1, OC-12/STM-4 (622 Mbps), and OC-48/STM-16 (2.488 Gbps) datarates for multimode, short-reach, intermediate-reach, and long-reach applications. MostSONET/SDH SFPs have features as below.

FEATURES

3.3 V operating voltage

Metal enclosure for lower EMI

Class 1 Laser International Safety Standard IEC-60825 Compliant

Compliant with SFP MSA

Digital diagnostic monitor are selectable

4G SFP

4G SFP is most used in Fibre Channel application. It is a a high performance, cost effectivemodule at data rates of 4.25Gbps. It supports 4x/2x/1x Fibre Channel and is also compatible withGigabit Ethernet as specified in IEEE Std 802.3. It is fully compliant to the SFP Multi SourceAgreement (MSA) and the Fibre Channel 400-M5/M6-SN-1 specification. The transmitter uses aVCSEL, FP or DFB laser, and receiver uses an APD or PIN photodiode integrated with atrans-impedance preamplifier (TIA). All FiberStore's 4G SFP modules are class 1 laser safe andcan come with digital diagnostic monitoring (DDM). They are with different data rates, including4G & 2G Fibre Channel SFP. And there is also 8G Fibre Channel SFP as a plus type. The feautresare as showing below.

FEATURES

Up to 4.25Gbps (8G as a plus type also available)

Duplex LC optical interface

3.3 V operating voltage

AC/AC Coupling according to MSA

Class 1 Laser International Safety Standard IEC-60825 Compliant

RoHS Compliant

Digital diagnostic monitor are selectable

CWDM & DWDM SFP

CWDM SFP provides scalable and easy-to-deploy Gigabit Ethernet and Fibre Channelservices in optical networks. It enables the design of flexible multiservice networks. TheCWDM SFP consists of three sections: an uncooled CWDM DFB laser transmitter, a PINphotodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit.There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm.These wavelengths are compliant to the ITU G.694 CWDM standard.

FEATURES

Multi-rate Transceiver for data rates from 100 Mbps up to 4 Gbps

3.3 V operating voltage

AC/AC Coupling according to MSA

Class 1 Laser International Safety Standard IEC-60825 Compliant

RoHS Compliant

DWDM SFP transceiver provides a high-speed serial link at signaling rates from 100 Mbpsto 2.5Gbps. It allows the use of fiber-conserving WDM solutions in standard switches androuters, eliminating the need for a separate optical transport device. FiberStore's DWDMSFPs are capable of supporting data rates from 155Mbps to 2.488Gbps, as well as 622Mbps,Gigabit Ethernet, and 1G and 2G Fibre Channel.

FEATURES

IEEE Std 802.3

DWDM SFP MSA compatible

Duplex LC connector

3.3 V operating voltage

RoHS compliant

BIDI SFP

BIDI SFP (Bi-Directional SFP) is a compact optical transceiver module used for bothtelecommunication and data bidirectional communications applications. It is also commonly usedin Fast Ethernet, Gigabit Ethernet, 1/2/4 Fibre Channel and SDH/SONET networks. FiberStore'sBIDI SFP can be produced either with SC or LC simplex ports, used in both transmission andreceiving. By offering a standard, hot swappable electrical interface, it can support a wide range ofphysical media, from copper to long-wave single-mode optical fiber, at lengths of hundreds ofkilometers. The most typical wavelength combination is 1310/1490, 1310/1550 and 1490/1550.

FEATURES

3.3 V operating voltage

Class 1 FDA and IEC60825-1 Laser Safety Compliant

Compliant with SFP MSA

Metal enclosure for lower EMI

Digital diagnostic monitor are selectable

Wide operating temperature range

Compatible with RoHS

Copper & SGMII SFP

FiberStore's 1000BASE-T or 10/100/1000BASE-T Autonegotiation RJ45 Copper SFPtransceiver is a high-performance duplex data link for bi-directional communication,integrated with a Category 5 unshielded, twisted-pair copper cable. The Copper SFP can beinstalled into optical SFP slots enabling an optical Ethernet port (1000Base-X) to beconverted into a copper Ethernet port (1000Base-T). The transceiver supports 1000Mbps (or10/100/1000Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM)signals. It is compatible with Gigabit Ethernet and 1000BASE-T standards.

FEATURES

Hot-pluggable SFP footprint

3.3 V operating voltage

Compact RJ-45 connector assembly

Metal enclosure for lower EMI

FiberStore's SGMII SFP is designed for Fast Ethernet applications, requiring an SGMIIinterface in the host system. With high performance MCU in the transceiver, the build-inPHY can be easily configured to run the SGMII interface protocol. With a SERDES interfaceand no clock, the SFP transceiver supports 100Mbps/125Mbps Fast Ethernet only. It is100BASE-FX SFP Fast Ethernet Interface Converter on Gigabit SFP Ports.

FEATURES

Build-in PHY supporting SGMII Interface

3.3 V operating voltage

Compliant with SFP MSA package with LC Connector

Metal enclosure for lower EMI

DATA SOURCE: http://www.fiberopticshare.com/