Upload
said-dzhamaldinov
View
207
Download
9
Tags:
Embed Size (px)
Citation preview
SGS Swiss Implant Systems
SGS Dentalwww.sgs-dental.comNQAISO 9001:2008ISO 13485:2012
www.sgs-dental.com2
ImplantAbutment
SwissProsthetics
Healing cap
Conical Connection
Zirconium
Titanium
Drilling protocol
Ball attachementPremium surface
P9S
Surgical tools
Surgical in
struments
Ratchet Hex Driver
Implanto
logy
P7N
Angular abutment
Cover screw
Short adaptor
Surgical kits
Analog
Transfer
Bone typeConus p
latform
Internal H
ex
Bone Collector Drills
Long warranty
P1
Education
Favorable prices
All solutions for a perfect smile.
www.sgs-dental.com www.sgs-dental.com 3
Table of contents
Company Profile 4-7Dental Implants 10-19
Prosthetic Accessories 20-42Surgical Kits 43
Surgical Tools 44Surgical Instruments 45
Surgical Drills 46
ImplantAbutment
SwissProsthetics
Healing cap
Conical Connection
Zirconium
Titanium
Drilling protocol
Ball attachementPremium surface
P9S
Surgical tools
Surgical in
struments
Ratchet Hex Driver
Implanto
logy
P7N
Angular abutment
Cover screw
Short adaptor
Surgical kits
Analog
Transfer
Bone typeConus p
latform
Internal H
ex
Bone Collector Drills
Long warranty
P1
Education
Favorable prices
www.sgs-dental.com4
SGS International Ltd. is incorporated in Liechtenstein, Schaan. It offers customers a comprehensive range of innovative, science-based dental solutions, for all indications. That is why we provide solutions with high technology, competitive prices and excellent quality. Our factory is equipped with the
most modern swiss made CNC machines.
We offer a wide range of implant systems providing a large variety of clinical solutions for the broad spectrum of challenges faced by implant-dentistry.All our implants are made of biocompatible, medical grade 5 titanium alloy; they adhere to the most stringent international quality standards and are ISO and CE approved.
SGS International Ltd. is a market leader in the dental implant industry, present in the daily lives of thousands of professionals around the world. Our logistic headquarter center is located in Budapest, Hungary.In our brand new 2500 sqm site we have launched our new sterile packaging and worldwide distribution center which is providing service for more then 17 Countries in Europe and Asia. Just recently we have opened our new SGS Medical Center, where we started to treat patients from all over the world and also give medical education training for oral surgeons.
For this reason the full range of our branded products SGS Dental Implants is inspected 100% with the most precise triple quality controls, from the production plan until the product reaches your hands, the quality of our products has been supervised in all phases and processes in this chain.
SGS International Ltd. has obtained the CE by the European Notified Body CE 1979, Directive 2007/47/EC modified European Directive 93/42/EEC - Annex II, Section 4 and are also certified with the quality standard EN ISO 9001:2008 and ISO 13485:2012 on devices dental-implant, so the quality of our products is fully guaranteed. SGS International Ltd. is also registered by NQA quality management system. All products of SGS International Ltd. are manufactured under license agreement of SGS Dental Implant System Holding, Liechtenstein.
Company Profile
www.sgs-dental.com www.sgs-dental.com 5
Implantology
Dental implants have changed the face of dentistry. A dental implant is actually a replacement for the root or roots of a tooth.
Like tooth roots, dental implants are secured in the jawbone and are not visible once surgically placed. They are used to secure crowns (the parts of teeth seen in the mouth), bridgework or dentures by a variety of means. They are made of titanium, which is lightweight, strong and biocompatible, which means that it is not rejected by the body. Titanium and tita-nium alloys are the most widely used metals in both dental and other bone implants, such as orthopedic joint replacements. Dental implants have the highest success rate of any implanted surgical device.
Titanium
All SGS Dental Systems’ implants are made from “bio friendly“ medical titanium alloy, grade 5. Titanium’s special property of fusing to bone, called osseointe-gration (“osseo” – bone; “integration” – fusion or join-ing with), is the biological basis of dental implant success. That’s because when teeth are lost, the bone that supported those teeth is lost too. Placing dental implants stabilizes bone, preventing its loss. Along with replacing lost teeth, implants help maintain the jawbone’s shape and density. Dental implants help you eat, chew, smile, talk and look completely nat-ural. This functionality imparts social, psychological and physical well-being.A typical implant consists of a titanium screw (resembling a tooth root) with a roughened or smooth surface. The majority of dental implants are made out of commercially pure titanium. SGS is using Medical Grade 5 Titanium, Titanium 6AL-4V, (signifying the Titanium alloy containing 6% Alumini-um and 4% Vanadium alloy) is believed to offer similar osseointegration levels as commercially pure titani-um. Ti- 6Al-4V alloy offers better tensile strength and fracture resistance.
SGS-Sterilization procedure
SGS has a strict sterilisation process, undergoing a contineous laboratory control and report manual managment. All our implant undergo a clean-room packaging channel and then intreduced to Gamma radiation.We keep a hard control on the steps our collegues practise and each dosage of Implants is randomly inspected in SGS laboratories.
Product guarantee
SGS Dental Systems guarantees all its products for a period of 15 years when used in accordance with the supplied instructions for use and the company’s protocols.
www.sgs-dental.com6
Advantages of the SBTC® coating
Complex surface design with significant surface enlargement Higher wettability with blood/high affinity for blood Increased primary stability with reduced healing time Active support of bone attachment Higher application security Possible diversification of indications (early loading/immediately loading) Prevention of spontaneous oxidation of the titanium surface through CaP-coating Higher osteoconductivity of the surface Outstanding biocompatibility Thin coating Microcrystalline structure, large open surface High solubility and controlled resorption area Complete coverage of porous surfaces and complex implant geometries Non- line of sight process No particle shedding or flaking
Following are results of SEM-EDS-XPS analyses of SGS Systems Co implants with Bonit coating
Bonit coated Dental Implants of SGS Systems Co have all substantial features of the Bonit type Ca-P coating:
Clean uncontaminated uniform surface; Typical Bonit-like crystalline structure of Ca-P brushite particles’ coating on dental implants surface; Ca-P-O chemical composition of the coating layer approving its Bonit origin.
Summary
The implants with the BONITex-surface showed between 14 and 30 days a significant increased Bone-Im-plant-Contact (BIC) in the spongiosa. In the further course within the bony remodeling BIC-Data in the range between 40-60% arised, which conforms to the data described in the literature. After 30 days the osteocalcin –expression too was significant increased by the implants with the BONIT ex-surface.
SEM magnificationX25: clean uniform surface with no contaminations
SEM magnificationX2000: clear uniform crystalline structure of Ca-P Bonit type
EDS spectrum: Calcium-Phosphorus- Oxygen presence adequate to chemical
composition of Bonit type coating
SGS Premium Surface
A new microstructured bioactive Surface for implants!
SGS Systems Co implements famous SBTC coating for its dental implants:SBTC® are world known types of dental implants coatings having outstanding performances in dental implantation practice.
www.sgs-dental.com www.sgs-dental.com 7
The Controlled double Acid treatment delivers the desired roughness and porosity without leaving embedded debris and Acid residue on the Implant Surface.Improved ossteointegration allows the bone to grow around the implant and into it within the lowest healing time possible, and with a more potent grip of the grown bone around the Implant, thereby increasing the pre-dictability of the implantation treatment both in the short and long term.The exclusivity of the SCTi® Process is seen through elaboration of its parameters using SEM-EDS and XPS technique as power instruments, both for development and for online operation control. The Process was approved through its 2010-2013 continuous running and manufacturing above 350,000 successfully traded dental implantsduring this period.
Following are results of SEM-EDS analyses of SGS Systems Co implants manufactured with SCTi® Process
SEM photomicrographs at Magnification X25 located above show that the implants’ surface is absolutely clean, with no foreign particles remaining on the surface.
SEM photomicrographs at Magnification X2000 located above show clean surface, no particles remaining behind the treatment. The porous structure is very definite, with roughly 5-15 microns diameter, within the surface area of 100X100 microns, while the pores’ walls and bottom are cratered by small pores of 2-4 microns diameter.
EDS spectrum located above show that the surface chemical composition of implants at occasionalpoints of interest is of the original Titanium alloy (Ti, Al and V at appropriate ratio), with nocontamination.
Sample from (SCTi) 11-0774 Sample from (SCTi) 11-0435
Sample from (SCTi) 11-0774 Sample from (SCTi) 11-0435
(SCTi)
After 45 days EDS spectrum
The SGS Comprehensive Titanium Surface Treatment (SCTi®) Process is the new innovative development Surface Treatment method by SGS, utilizing oxi-dized Titanium compiled with Hydroxyapatite crystals to spray the Surface for optimal rough-ness and micro-geometry, followed by a controlled double Acid treatment to allow deep dim-ples and porosity within the optimal 5 – 10 microns range.
SGS Surface Treatment
www.sgs-dental.com8
New P7N Implant
www.sgs-dental.com www.sgs-dental.com 9
www.sgs-dental.com10
Short pitch, slightly aggressive implant, which is specially for hard bone (mandibula), with platform shift and internal hex.
InTernAl Hex
P1 Screw Type Groovy Implant
Recommended bone type: D1 - D2 Insertion rotation speed: 30 rpm.!
Cover Screw Included
PB
Platform Shifting
Platform Shifting since the soft-tissue and bone naturally heal over the implant.
Middle Threads
The screw is designed to avoid bone fracture under inserting pressure. As the double-thread is connected to the tapered body-thread, it support the primary stability.
Bone Collector
The Bone Collector collect all the bone, and the Apex profile enables safe implant insertion.
Advantages
- High primary stability- easy insertion- Bone condensing- Preventing damage to anatomical structures- Self tapping- Immediate loading
Benefit
- Internal hex: perfect implant- abutment connection- One platform for all implants
P1 - 8mm
Short implantratchet hex driver for implant
K5-2.4, 15mmK5-2.4, 9mm
2.4mm
K5 - 2.4
2.4mm
K5-2.4, 0mm
Short or long adaptor for the implant
K8-L-2.4, 28mmK8-2.4 - 23mm
2.4mm
K8 - 2.4
2.4mm
K8-2.4 - 17mm
www.sgs-dental.com www.sgs-dental.com 11
Drill Speed (RPM) 700-800 700-900 500-700 500-700 400-700 400-600 400-600 300-500
Diameter Ø 1.9 Ø 2.0 2.5 2.8 3.2 3.7 4.5 5.5
Implant sizes 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
- - - 6 mm 6 mm
8 mm 8 mm 8 mm 8 mm 8 mm
10 mm 10 mm 10 mm 10 mm 10 mm
11.5 mm 11.5 mm 11.5 mm 11.5 mm 11.5 mm
13 mm 13 mm 13 mm 13 mm 13 mm
16 mm 16 mm 16 mm 16 mm 16 mm
D
L
Drilling Protocol
Straight drilling protocol 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0
- Ø 2.5 Ø 2.5 Ø 2.5 Ø 2.5
- - Ø 2.8 Ø 2.8 Ø 2.8
- - - Ø 3.2 Ø 3.2
- - - Ø 3.7 Ø 3.7
- - - - Ø 4.0
2/3 depth Ø 2.5 Ø 2.8 Ø 3.2 Ø 4.0 Ø 4.5
1/3 depth Ø 2.8 Ø 3.2 Ø 3.7 Ø 4.5 Ø 5.5
Conical drilling protocol 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4
Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8
- Ø 3.2 Ø 3.2 Ø 3.2 Ø3.2
- - Ø 3.7 Ø 3.7 Ø 3.7
- - - Ø 4.5 Ø 4.5
- - - - Ø 5.5
1/3 depth
2/3 depth
Full depth
Procedure recommended by SGS cannot replace the judgment and the experience of the surgeon.!
www.sgs-dental.com12
High pitch, slightly aggressive implant, which is suitable for immediate loading and excellent integration. It is characterized by self tapping screw with platform shifting and internal hex.
P7 Conical Groovy Implant
Platform Shifting
Platform Shifting since the soft-tissue and bone naturally heal over the implant.
Middle Threads
The screw is designed to avoid bone fracture under inserting pressure. As the double-thread is connected to the tapered body-thread, it support the primary stability.
Bone Collector
The Bone Collector collect all the bone, and the Apex profile enables safe implant insertion.
InTernAl Hex
Advantages
- excellent primary stability- easy insertion- Bone condensing- Preventing damage to anatomical structures- Self tapping- Immediate loading
Benefit
- Internal hex: perfect implant- abutment connection- One platform for all implants
Cover Screw Included
PB
Recommended bone type: D1 - D2 - D3 - D4 Insertion rotation speed: 30 rpm.!
P7 - 6mm
Short implantratchet hex driver for implant
K5-2.4, 15mmK5-2.4, 9mm
2.4mm
K5 - 2.4
2.4mm
K5-2.4, 0mm
Short or long adaptor for the implant
K8-L-2.4, 28mmK8-2.4 - 23mm
2.4mm
K8 - 2.4
2.4mm
K8-2.4 - 17mm
Diameter: Ø 4.5, Ø 5, Ø 6
www.sgs-dental.com www.sgs-dental.com 13
Implant sizes 3.2 mm 3.75 mm 4.2 mm 4.5 mm 5 mm 6 mm
- - - 6 mm 6 mm 6 mm
8 mm 8 mm 8 mm 8 mm 8 mm 8 mm
10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
11.5 mm 11.5 mm 11.5 mm 11.5 mm 11.5 mm 11.5 mm
- 13 mm 13 mm 13 mm 13 mm 13 mm
- 16 mm 16 mm 16 mm 16 mm 16 mm
D1
L
Drilling Protocol
Straight drilling protocol 3.2 mm 3.75 mm 4.2 mm 4.5 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0
- Ø 2.5 Ø 2.5 Ø 2.5 Ø 2.5 Ø 2.5
- - Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8
- - - Ø 3.2 Ø 3.2 Ø 3.2
- - - - Ø 3.7 Ø 3.7
- - - - - Ø 4.0
2/3 depth Ø 2.5 Ø 2.8 Ø 3.2 Ø 3.7 Ø 4.0 Ø 4.5
1/3 depth Ø 2.8 Ø 3.2 Ø 3.7 Ø 4.0 Ø 4.5 Ø 5.5
1/3 depth
2/3 depth
Full depth
Conical drilling protocol 3.2 mm 3.75 mm 4.2 mm 4.5 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4
Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8
- Ø 3.2 Ø 3.2 Ø 3.2 Ø 3.2 Ø3.2
- - Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7
- - - - Ø 4.5 Ø 4.5
- - - - - Ø 5.5
Drill Speed (RPM) 700-800 700-900 500-700 500-700 400-700 400-600 400-600 400-600 300-500
Diameter Ø 1.9 Ø 2.0 2.5 2.8 3.2 3.7 4.0 4.5 5.5
Procedure recommended by SGS cannot replace the judgment and the experience of the surgeon.!
www.sgs-dental.com14
One-piece implant. It has the same parameters like P7. The abutment is integrated.P7S Integral Groovy Implant
Benefit
- High primary stability- Bone condensing- Preventing damage to anatomical structures - enables the implant to penetrate small diameter prepared sites- Self tapping- Immediate loading
Platform Shifting
The innovative design creates an optimal emergence profile.
Middle Threads
The screw is designed to avoid bone fracture under inserting pressure. As the double-thread is connected to the tapered body-thread, it support the primary stability.
Bone Collector
The Bone Collector collect all the bone, and the Apex profile enables safe implant insertion.
Recommended bone type: D2 - D3 - D4 Insertion rotation speed: 30 rpm.!
6 mm
P7S - 6mm
Short P7S
P7S-N - 3mm
narrow P7S-n
3 mm
ratchet hex driver for P7S
K6-P7S
K6
L
16 mm
Analog
A1 - P7S - NA1 - P7S
AnalogAnalog narrow
3.6 mm 3 mm
3.6 mm 3 mm
Transfer
T1 - P7S - NT1 - P7S
TransferTransfer narrow
www.sgs-dental.com www.sgs-dental.com 15
Implant sizes 3.0 mm 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
- - - - 6 mm 6 mm
- 8 mm 8 mm 8 mm 8 mm 8 mm
10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
11.5 mm 11.5 mm 11.5 mm 11.5 mm 11.5 mm 11.5 mm
13 mm 13 mm 13 mm 13 mm 13 mm 13 mm
16 mm 16 mm 16 mm 16 mm 16 mm 16 mm
D
L
Straight drilling protocol 3.0 mm 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0 Ø 2.0
- - Ø 2.5 Ø 2.5 Ø 2.5 Ø 2.5
- - - Ø 2.8 Ø 2.8 Ø 2.8
- - - Ø 3.2 Ø 3.2 Ø 3.2
- - - - Ø 3.7 Ø 3.7
- - - - - Ø 4.0
2/3 depth - Ø 2.5 Ø 2.8 Ø 3.7 Ø 4.0 Ø 4.5
1/3 depth Ø 2.5 Ø 2.8 Ø 3.2 Ø 4.0 Ø 4.5 Ø 5.5
1/3 depth
2/3 depth
Full depth
Conical drilling protocol 3.0 mm 3.2 mm 3.75 mm 4.2 mm 5 mm 6 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4 Ø 2.4
- Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8 Ø 2.8
- - Ø 3.2 Ø 3.2 Ø 3.2 Ø3.2
- - - Ø 3.7 Ø 3.7 Ø 3.7
- - - - Ø 4.5 Ø 4.5
- - - - - Ø 5.5
Drill Speed (RPM) 700-800 700-900 500-700 500-700 400-700 400-600 400-600 400-600 300-500
Diameter Ø 1.9 Ø 2.0 2.5 2.8 3.2 3.7 4.0 4.5 5.5
Drilling Protocol
L:8
Procedure recommended by SGS cannot replace the judgment and the experience of the surgeon.!
www.sgs-dental.com16
One-piece esthetic implant.
P9S-a
P9S Thin Integral Implant
Benefit
- Small diameter- Hight primary stability- Suitable for immediate loading- Good restoration control
P9S
Recommended bone type: D2 - D3 - D4 Insertion rotation speed: 30 rpm.!
Gingival Neck
No micro gap. Single crown and anterior cemented bridges.
Middle Threads
Bone condensong property. The optimal usage is for maxillary lateral incisors and mandibular incisors. Primary stability.
Narrow Apical Part
Easy insertion. Small diameter prepared sites.
ratchet hex driver for P9S
K6-P9S
K6
L
16 mm
Analog
A1-P9S / P7S-N
A1-P9S / P7S-n
3 mm
www.sgs-dental.com www.sgs-dental.com 17
Implant sizes: 2.4 mm 3.0 mm 3.2 mm
- - -
- - -
10 mm 10 mm 10 mm
11.5 mm 11.5 mm 11.5 mm
13 mm 13 mm 13 mm
16 mm 16 mm 16 mm
L
L:8
D1
P:1.5
Drilling Protocol
Straight drilling protocol 2.4 mm 3.0 mm 3.2 mm
Marker drill Ø 1.9 Ø 1.9 Ø 1.9
Full depth
Ø 2.0 Ø 2.0 Ø 2.0
- -
- - -
- - -
- - -
- - -
2/3 depth - - -
1/3 depth - Ø 2.5 Ø 2.5
1/3 depth
2/3 depth
Full depth
Drill Speed (RPM) 700-800 700-900 500-700
Diameter Ø 1.9 Ø 2.0 2.5
Procedure recommended by SGS cannot replace the judgment and the experience of the surgeon.!
www.sgs-dental.com18
P7N Narrow Conical Implant2.1mm
Benefit
- narrow diameters- Hight primary stability- Maximum bone preservation - High soft tissue volume - Self tapping - Sharp and deep pitch- Immediate loading
High pitch, slightly aggressive implant with new special conical connection. It is suitable for immediate loading. It is characterized by excellent integration and self tapping screw.
Cover Screw Included
PBn
Recommended bone type: D2 - D3 - D4 Insertion rotation speed: 30 rpm.!
InTernAl COnICAl COnneCTIOnConical platform
More soft tissue volume. Platform shifting improve soft tissue for the esthetitcs.
Initial Stability
Dual thread design increases bone to implant contact. Self-tapping design and mild bone compression properties. Maximum primary stability.
Narrow Apical Part
Sharp and deep threads. Apical drilling blades. Enables less osteotomy.
conical interface
ratchet hex driver for P7n
K5-2.1, 15mmK5-2.1, 9mm
2.1mm
K5 - 2.1
2.1mm
Short or long adaptor for P7n
K8-L-2.1, 28mmK8-2.1, 23mm
K8 - 2.1
www.sgs-dental.com www.sgs-dental.com 19
Drilling Protocol
Straight drilling protocol 3.0 mm 3.2 mm
Marker drill Ø 1.9 Ø 1.9
Full depth
Ø 2.0 Ø 2.0
-
- -
- -
- -
- -
2/3 depth - -
1/3 depth Ø 2.5 Ø 2.5
1/3 depth
2/3 depth
Full depth
Conical drilling protocol 3.0 mm 3.2 mm
Marker drill Ø 1.9 Ø 1.9
Full depth
Ø 2.4 Ø 2.4
- Ø 2.8
- -
- -
- -
- -
Implant sizes: 3.0 mm 3.2 mm
- -
- -
10 mm 10 mm
11.5 mm 11.5 mm
13 mm 13 mm
16 mm 16 mm
L
D2
D1
Procedure recommended by SGS cannot replace the judgment and the experience of the surgeon.!
Drill Speed (RPM) 700-800 700-900 500-700
Diameter Ø 1.9 Ø 2.0 2.5
www.sgs-dental.com20
2.1mmNarrow conus
platform
Instrument tools and driver
Prosthetic Accessories for P7N
ratchet hex driver for implant
K5-2.1, 15mmK5-2.1, 9mm
2.1mm
K5 - 2.1Short or long adaptor
K8-2.1, 28mmK8-2.1, 23mm
2.1mm
K8 - 2.1
Prosthetic tools for the abutment
A1-n - Analog
ratchet hex driver for abutment
K1-1.2, 15mmK1-1.2, 9mm
1.25mm
K1Short and long hand driver
for abutment
K2-1.2, 15mmK2-1.2, 9mm
1.25mm
K2Short and long adaptor
for abutment
K9-1.2, 26mmK9-1.2, 21mm
1.25mm
K9retrieval screw
K7N - 1.2
K7n - 1.2
Narrow conus platform
L(mm) 10
narrow analog
A1-N - 2.1
A1-n - 2.1
www.sgs-dental.com www.sgs-dental.com 21
Recommended tightening torque 15 Ncm for the screw.
Healing abutments for P7N
L(mm) 2
4.5 mm
HN-2.1 - 2mm
Hn-2.1 - 2mm
L(mm) 3
HN-2.1 - 3mm
Hn-2.1 - 3mm
HN-2.1 - 4mm
Hn-2.1 - 4mm
L(mm) 4
normal platform (anatomic)HN
narrow platform
HNN-2.1 - 2mm
Hnn-2.1 - 2mm
L(mm) 2
3.8 mm
HNN-2.1 - 4mm
Hnn-2.1 - 4mm
L(mm) 4
HNN
Wide platform (anatomic)
HWN-2.1 - 2mm
HWn-2.1 - 2mm
L(mm) 2
5.7 mm
HWN-2.1 - 4mm
HWn-2.1 - 4mm
L(mm) 4
HWN
www.sgs-dental.com22
The plastic abutment for casting with Hex. Good for the single tooth/crown with internal hexagon.
The plastic abutment for casting without Hex. Good for the bridge/bar without internal hexagon.
Recommended tightening torque 25 Ncm for the screw.
Impression platform
Impression/ Prosthetic Accessories for P7N
L(mm)
9
L(mm)
7
Plastic transfer (closed tray)
T3N - 2.1
T3n-2.1
L(mm)
9
Clip transfer (closed tray)
T2N - 2.1, 9mm
T2n-2.1
L(mm) 15
Impression transfer (open tray)
T3N-L - 2.1, 15mm
T3n-l-2.1
Step-by-step using T3
1 2 3
Insert the impression coping plastic caps on the closed tray impression coping abutments. The impression coping plastic caps should be placed on the abutment, assuring that the arrow on the plastic coping corresponds to the flat facet of the abutment.
Prosthetic accessories
Plastic sleeve with hex
S1PNH - 2.1, 11mm
S1PnH-2.1
L(mm) 11 L
(mm) 11
Plastic sleeve without hex
S1PN - 2.1, 11mm
S1Pn-2.1
www.sgs-dental.com www.sgs-dental.com 23
Recommended tightening torque 25 Ncm for the screw.
Recommended tightening torque 25 Ncm for the screw.
Recommended tightening torque 25 Ncm for the screw.
Prosthetic Accessories for P7N
Overdenture ball attachmentS3N 2.1
L(mm) 4
(1) Hard
(2) Standard
(3) Soft
L(mm) 1
(1) Hard
(2) Standard
(3) Soft
Ball attachment
S3N - 2.1, 1mm
S3n-2.1 - 1mm
L(mm) 2
(1) Hard
(2) Standard
(3) Soft
Ball attachment
S3N - 2.1, 2mm
S3n-2.1 - 2mm
L(mm) 3
(1) Hard
(2) Standard
(3) Soft
Ball attachment
S3N - 2.1, 3mm
S3n-2.1 - 3mm
Ball attachment
S3N - 2.1, 4mm
S3n-2.1 - 4mm
Straight titanium abutmentS1N 2.1
L(mm)
9
narrow conical abutment
S1N - 2.1, 9mm
S1n-2.1
L(mm)
9
Wide conical abutment
S1WN - 2.1, 9mm
S1Wn-2.1
L(mm)
1
Anatomic conical abutment
S1AN - 2.1, 1mm
S1An-2.1
L(mm)
11
15°
narrow angular conical abutment
S2N - 2.1, 15°
S2n-2.1
L(mm)
1
15°
narrow anatomic angular conical abutment
S2AN - 2.1, 15°
S2An-2.1
Angular titanium abutmentS2N 2.1
www.sgs-dental.com24
T1L- 3.75
A1- 3.75
S2- 3.75
S1A- 3.75
P7
Prosthetic Tools for Platform 3.75
Platform
3,75
ratchet hex driver for abutment
K1-1.2, 15mmK1-1.2, 9mm
1.25mm
K1
1.25mm
Short and long hand driver for abutment
K2-1.2, 15mmK2-1.2, 9mm
K2
1.25mm
Short and long adaptor for abutment
K9-1.2, 26mmK9-1.2, 21mm
K9retrieval screw
K7 - 1.7
K7 - 1.7
Platform 3.75
One platform for P1 and P7
Internal hex: Perfect connection for abutments
Platform shifting
Internal hex
P1
www.sgs-dental.com www.sgs-dental.com 25
Benefit-Suitable for all of the P1 and P7 implants
- High esthetics
- Enhanced gingiva healing
Recommended tightening torque 15 Ncm for the screw.
Healing abutments for Platform 3.75
Platform
3,75
Healing capH 3.75
L(mm)
2
4.7 mm
H - 3.75, 2mm
H-3.75, 2mm
L(mm)
3
H - 3.75, 3mm
H-3.75, 3mm
L(mm) 4
H - 3.75, 4mm
H-3.75, 4mm
L(mm) 5
H - 3.75, 5mm
H-3.75, 5mm
L(mm) 6
H - 3.75, 6mm
H-3.75, 6mm
L(mm) 3
3.5 mm
HN - 3.75, 3mm
Hn-3.75 - 3mm
L(mm) 5
HN - 3.75, 5mm
Hn-3.75 - 5mm
narrow healing capHN 3.75
Wide healing capHW 3.75
L(mm) 3
6.0 mm
HW - 3.75, 3mm
HW-3.75 - 3mm
L(mm) 5
HW - 3.75, 5mm
HW-3.75 - 5mm
www.sgs-dental.com26
Springy impression transfer without screw. Suitable for the closed tray. Recommended: suitable for the parallel implants only! The clip transfer doesn’t completely replace standard transfer.
Implant impression transfer, suitable for the closed tray. Insert the impression coping plastic caps on the closed tray impression coping abutments. The impression coping plastic caps should be placed on the abutment, assuring that the arrow on the plastic coping corresponds to the flat face of the abutment. Impression transfer is suitable for all of the P1 and P7 diameters.
L(mm) 9
L(mm) 7
Made of stainless steel.
Made of stainless steel.
Platform
3,75
Prosthetic Impression for Platform 3.75
Impression transferT1 3.75
L(mm) 9
T1 - 3.75, 9mm
T1-3.75 - 9mm
L(mm) 15
T1 - 3.75, 15mm
T1-3.75 - 15mm
Clip transferT2 3.75
Open tray
L(mm) 9
T2 - 3.75, 9mm
T2-3.75
Open tray
Impression transfer set for closed trayT3 3.75
Closed tray
www.sgs-dental.com www.sgs-dental.com 27
Impression transfer is suitable for all of the P1 and P7 diameters. Suitable for the open tray. Included special hand screw for closing.
Implant analog is suitable for all of the P1 and P7 diameters. The analog is suitable to allow preparation of lab models.
Made of stainless steel.
Made of stainless steel.
Prosthetic Impression for Platform 3.75
Platform
3,75
easy hand transferT4 3.75
L(mm) 15
T4 - 3.75, 15mm
T4-3.75 - 15mm
Open tray
L(mm) 9
T4 - 3.75, 9mm
T4-3.75 - 9mm
Open tray
AnalogA1 3.75
L(mm) 13
A1 - 3.75
A1-3.75
1 2
www.sgs-dental.com28
BeNefIT- Platform shifting narrow neck
- Enhanced gingiva healing
- Designed for a better soft tissue interface
Straight titanium abutment with hex activ for cemented reconstruction.
Recommended tightening torque 25 Ncm for the screw.
Straight Abutments for Platform 3.75
Straight abutmentS1 3.75
L(mm) 12
S1 - 3.75, 12mm
S1-3.75, 12mm
L(mm) 5
S1 - 3.75, 5mm
S1-3.75, 5mm
L(mm) 7
S1 - 3.75, 7mm
S1-3.75, 7mm
L(mm) 9
S1 - 3.75, 9mm
S1-3.75, 9mm
L(mm) 15
S1 - 3.75, 15mm
S1-3.75, 15mm
Straight narrow abutmentS1N 3.75
L(mm) 9
S1N - 3.75, 9mm
S1n-3.75 - 9mm
L(mm) 7
S1N - 3.75, 7mm
S1n-3.75 - 7mm
2.5L(mm)
S1a
S1a
Straight wide abutmentS1W 3.75
L(mm)
9
S1W - 3.75, 9mm
S1W-3.75 - 9mm
2.5L(mm)
S1a
S1a
Platform
3,75
www.sgs-dental.com www.sgs-dental.com 29
Angular Abutments for Platform 3.75
Platform
3,75
Recommended tightening torque 25 Ncm for the screw.
Angular abutmentS2L 3.75
15°
L(mm)
11
15°
S2L-15° - 3.75, 11mm
S2l-15° - 3.75 - 11mm
L(mm)
15
15°
S2L-15° - 3.75, 15mm
S2l-15° - 3.75 - 15mm
2.5L(mm)
S2a
S2a
Angular abutmentS2 3.75
25°
L(mm) 11
25°
S2-25° - 3.75, 11mm
S2-25° - 3.75 - 11mm
L(mm) 15
25°
S2L-25° - 3.75, 15mm
S2l-25° - 3.75 - 15mm
2.5L(mm)
S2a
S2a
Angular abutmentS2L 3.75
L(mm) 15
35°
S2L-35° - 3.75, 15mm
S2l-35° - 3.75 - 15mm
L(mm) 15
45°
S2L-45° - 3.75, 15mm
S2l-45° - 3.75 - 15mm
2.5L(mm)
S2a
S2a
www.sgs-dental.com30
Anatomic Abutments for Platform 3.75
Platform
3,75
BeNefIT- Resembles the natural shapes of the tooth
- High esthetics results
- Enhanced gingiva healing
- Designed for a better soft tissue interface
BeNefIT- Resembles the natural shapes of the tooth
- High esthetics results
- Enhanced gingiva healing
- Designed for a better soft tissue interface
The anatomic anti-rotation abutment follows the shape of the gum line for cemented reconstruction.
The Anatomic Angular Abutment (15°) available heights – 1, 2, 3 mm. The lower side is located in the buccal part.
Recommended tightening torque 20 - 25 Ncm for the screw.
Anatomic straight abutmentS1A 3.75
1L(mm)
S1A - 3.75, 1mm
S1A-3.75 - 1mm
2L(mm)
S1A - 3.75, 2mm
S1A-3.75 - 2mm
3L(mm)
S1A - 3.75, 3mm
S1A-3.75 - 3mm
2.5L(mm)
S1a
S1a
Anatomic angular abutmentS2A 3.75
15°
1L(mm)
15°
S2A-15° - 3.75, 1mm
S2A-15° - 3.75 - 1mm
2L(mm)
15°
S2A-15° - 3.75, 2mm
S2A-15° - 3.75 - 2mm
3L(mm)
15°
S2A-15° - 3.75, 3mm
S2A-15° - 3.75 - 3mm
2.5L(mm)
S2a
S2a
Recommended tightening torque 25 Ncm for the screw.
www.sgs-dental.com www.sgs-dental.com 31
Recommended tightening torque 25 Ncm for the screw.
Zirconium Abutments for Platform 3.75
Platform
3,75
1L(mm)
S1AZ - 3.75, 1mm
S1AZ-3.75 - 1mm
2L(mm)
S1AZ - 3.75, 2mm
S1AZ-3.75 - 2mm
2.5L(mm)
S1a
S1a
Anatomic zirconium abutmentS1AZ 3.75
Anatomic zirconium angular abutmentS2AZ 3.75
15°
15°
1L(mm)
S2AZ-15° - 3.75, 1mm
S2AZ-15° - 3.75 - 1mm
15°
2L(mm)
S2AZ-15° - 3.75, 2mm
S2AZ-15° - 3.75 - 2mm
2.5L(mm)
S2a
S2a
Anatomic zirconium angular abutmentS2AZ 3.75
25°
25°
1L(mm)
S2AZ-25° - 3.75, 1mm
S2AZ-25° - 3.75 - 1mm
25°
2L(mm)
S2AZ-25° - 3.75, 2mm
S2AZ-25° - 3.75 - 2mm
2.5L(mm)
S1a
S1a
3L(mm)
S1AZ - 3.75, 3mm
S1AZ-3.75 - 3mm
15°
3L(mm)
S2AZ-15° - 3.75, 3mm
S2AZ-15° - 3.75 - 3mm
25°
3L(mm)
S2AZ-25° - 3.75, 3mm
S2AZ-25° - 3.75 - 3mm
www.sgs-dental.com32
Recommended tightening torque 25 Ncm for the screw.
BeNefITTemporary solutions with an esthetic result.
Peek Abutments for Platform 3.75
Anatomic angular peek abutmentS2A
PEEK 3.75
15°
Platform
3,75
Anatomic straight peek abutmentS1A
PEEK 3.75
1L(mm)
S1A-Peek - 3.75, 1mm
S1A-Peek - 3.75 - 1mm
2L(mm)
S1A-Peek - 3.75, 2mm
S1A-Peek - 3.75 - 2mm
2.5L(mm)
S1a
S1a
15°
1L(mm)
S2A-Peek-15° - 3.75, 1mm
S2A-Peek-15° - 3.75 - 1mm
15°
2L(mm)
S2A-Peek-15° - 3.75, 2mm
S2A-Peek-15° - 3.75 - 2mm
15°
3L(mm)
S2A-Peek-15° - 3.75, 3mm
S2A-Peek-15° - 3.75 - 3mm
2.5L(mm)
S2a
S2a
Anatomic angular peek abutmentS2A
PEEK 3.75
25°
25°
1L(mm)
S2A-Peek-25° - 3.75, 1mm
S2A-Peek-25° - 3.75 - 1mm
25°
2L(mm)
S2A-Peek-25° - 3.75, 2mm
S2A-Peek-25° - 3.75 - 2mm
2.5L(mm)
S1a
S1a
3L(mm)
S1A-Peek - 3.75, 3mm
S1A-Peek - 3.75 - 3mm
25°
3L(mm)
S2A-Peek-25° - 3.75, 3mm
S2A-Peek-25° - 3.75 - 3mm
www.sgs-dental.com www.sgs-dental.com 33
Plastic abutment for casting with internal hex or without hex. - The sleeve with the hexagon is suitable for make the metal casting for the crown.
- The sleeve without hexagon is suitable for make over denture bar metal.
A plastic casting abutment with titanium base and hex.
A plastic abutment for casting with titanium base & hex. Removable denture bridge and bars.
Recommended tightening torque 25 Ncm for the screw.
Bar-retained for Platform 3.75
Platform
3,75
Abutment for castingS1P 3.75
11L(mm)
S1PNH - 3.75, 11mm
S1PnH -3.75 - 11mm
11L(mm)
S1PNH - 3.75, 11mm
S1PnH -3.75 - 11mm
2.5L(mm)
S1a
S1a
Abutment for castingS1PT 3.75
L(mm)
11
S1PT - 3.75, 11mm
S1PT -3.75 - 11mm
Abutment for barsS1T 3.75
0.5L(mm)
S1T - 3.75, 0.5mm
S1T -3.75 - 0.5mm
1.5L(mm)
S1T - 3.75, 1.5mm
S1T -3.75 - 1.5mm
2.5L(mm)
S1T - 3.75, 2.5mm
S1T -3.75 - 2.5mm
www.sgs-dental.com34
DID YOU KNOW?
OUT OF 100 IMPLANTATIONS LESS THAN TWO HAVE NEGATIVE RESULT.
www.sgs-dental.com www.sgs-dental.com 35
CAD-CAM System for Platform 3.75
Platform
3,75
Scanning abutment for 3DCAD CAM
11L(mm)
SPC - 3.75, 11mm
SPC -3.75 - 11mm
2.5L(mm)
S1a
S1a
Beis for the zirconium abutmentCAD CAM
STC - 3.75
STC -3.75
2.5L(mm)
S1a
S1a
CAD-CAM System
www.sgs-dental.com36
Recommended tightening torque 25 Ncm for the screw.
Recommended tightening torque 25 Ncm for the screw.
Screw Type Abutment for Platform 3.75
Platform
3,75
Ball attachmentS3 3.75
(1) Hard
(2) Standard
(3) Soft
L(mm) 1
S3 - 3.75, 1mm
S3 -3.75 - 1mm
(1) Hard
(2) Standard
(3) Soft
L(mm)
2
S3 - 3.75, 2mm
S3 -3.75 - 2mm
(1) Hard
(2) Standard
(3) Soft
L(mm)
3
S3 - 3.75, 3mm
S3 -3.75 - 3mm
(1) Hard
(2) Standard
(3) Soft
L(mm)
4
S3 - 3.75, 4mm
S3 -3.75 - 4mm
(1) Hard
(2) Standard
(3) Soft
L(mm)
5
S3 - 3.75, 5mm
S3 -3.75 - 5mm
(1) Hard
(2) Standard
(3) Soft
L(mm)
6
S3 - 3.75, 6mm
S3 -3.75 - 6mm
Temporary abutmentS4 3.75
L(mm)
1
S4 - 3.75, 1mm
S4 -3.75 - 1mm
L(mm)
2
S4 - 3.75, 2mm
S4 -3.75 - 2mm
L(mm)
3
S4 - 3.75, 3mm
S4 -3.75 - 3mm
S3a
S3b
S3d
S4P
www.sgs-dental.com www.sgs-dental.com 37
1
Screw Type Abutment for Platform 3.75
Ball attachmentS3 3.75
Temporary abutment for immediate loadingS4 3.75
Platform
3,75
2
3
4
1
2
3
4
www.sgs-dental.com38
Recommended tightening torque 25 Ncm for the screw.
Use 25 Ncm to close the abutment screw for S6.
Screw Type Abutment for Platform 3.75
Platform
3,75
Screw type abutmentS6 3.75
L(mm)
1
S6 - 3.75, 1mm
S6 -3.75 - 1mm
L(mm) 2
S6 - 3.75, 2mm
S6 -3.75 - 2mm
L(mm) 3
S6 - 3.75, 3mm
S6 -3.75 - 3mm
Prosthetic accessories for S6
T - S6/S7
Titanium sleeve for temporary
With hex
PH - S6/S7
Plastic sleeve for casting
Without hex
P - S6/S7
Plastic sleeve for casting
L(mm) 4
H - S6/S7
Healing cap
A1 - S6/S7
Analog
T1 - S6/S7
Transfer
S6a
S6
www.sgs-dental.com www.sgs-dental.com 39
final restoration
final restoration
Screw Type Abutment for Platform 3.75
Prosthetic optionS6 3.75
A
B
Platform
3,75
1
2
34
6
5
7
89
10
1
2
34
5
6
7
8
910
11
Use 25 Ncm to close the abutment screw for S6.
www.sgs-dental.com40
Screw Type Angular Abutment for Platform 3.75
Platform
3,75
L(mm) 1
10°
S7 - 3.75-10°, 1mm
S7 -3.75-10° - 1mm
Screw type angular abutmentS7 3.75
L(mm)
2
S7 - 3.75-10°, 2mm
S7 -3.75-10° - 2mm
L(mm) 3
S7 - 3.75-10°, 3mm
S7 -3.75-10° - 3mm
L(mm) 1
17°
S7 - 3.75-17°, 1mm
S7 -3.75-17° - 1mm
L(mm)
2
S7 - 3.75-17°, 2mm
S7 -3.75-17° - 2mm
L(mm) 3
S7 - 3.75-17°, 3mm
S7 -3.75-17° - 3mm
L(mm) 1
30°
S7 - 3.75-30°, 1mm
S7 -3.75-30° - 1mm
L(mm) 2
S7 - 3.75-30°, 2mm
S7 -3.75-30° - 2mm
L(mm) 3
S7 - 3.75-30°, 3mm
S7 -3.75-30° - 3mm
S7e
S7d
T-S6/S7
Titanium sleeve
With Hex
PH-S6/S7
Plastic sleeve
Without Hex
PH-S6/S7
Plastic sleeve
H-S6/S7
Healing cap
S3/S7
Ball attachment
S8/S7
S8-S7
T1-S6/S7
Transfer
A1-S6/S7
Analog
www.sgs-dental.com www.sgs-dental.com 41
finalTemporary
Screw Type Angular Abutment for Platform 3.75
Platform
3,75
The perfect realizationS7 3.75
Without HexWith Hex
1. option 2. option 3. option
1 2 3 4
5 6 7
package content
www.sgs-dental.com42
Recommended tightening torque 25 Ncm for the screw.
S8 Attachment for the Over- denture
Platform
3,75
L(mm) 0.5
S8 - 3.75, 0.5mm
S8 -3.75 - 0.5mm
L(mm) 1
S8 - 3.75, 1mm
S8 -3.75 - 1mm
L(mm) 2
S8 - 3.75, 2mm
S8 -3.75 - 2mm
L(mm) 3
S8 - 3.75, 3mm
S8 -3.75 - 3mm
L(mm) 4
S8 - 3.75, 4mm
S8 -3.75 - 4mm
L(mm) 5
S8 - 3.75, 5mm
S8 -3.75 - 5mm
L(mm)
6
S8 - 3.75, 6mm
S8 -3.75 - 6mm
SGS-S8S8 3.75
ratchet driver
K4
Analog
A1-S8Transfer
T1-S8
Tools for the S8
Accessories
www.sgs-dental.com www.sgs-dental.com 43
Surgical instrumention kits are suitable for all procedures. Made of medically approved plastic. Suitable for all implants.
- Box dimensions: W= 10,8 cm, L= 19,5 cm, H= 5,5 cm
- Small size, easy to store- Logical structure- Suitable for all implants- Simple control during the drilling process
- Box dimensions: W= 8 cm, L= 10 cm, H= 4,5 cm
Surgical Kits
Organizer kitSK
Stopper drills kitSKD
www.sgs-dental.comwww.sgs-dental.com44
Surgical Tools
Implantology tools for the implants
ratchet hex driver for abutment
K1-1.2, 15mmK1-1.2, 9mm
1.25mm
K1Short or long hand driver
for abutment
K2-1.2, 15mmK2-1.2, 9mm
1.25mm
K2Short or long adaptor
for abutment
K9-1.2, 26mmK9-1.2, 21mm
1.25mm
K9retrieval screw
K7N
K7nK7
K7
ratchet hex driver for P7n
K5-2.1, 15mmK5-2.1, 9mm
2.1mm
K5 - 2.1
2.1mm
Short or long adaptor for P7n
K8-L-2.1, 28mmK8-2.1, 23mm
K8 - 2.1
L
16 mm
ratchet hex driver for P7S/P9S
K6
K6
Implantology tools for the abutments
ratchet hex driver for implant
K5-2.4, 15mmK5-2.4, 9mm
2.4mm
K5 - 2.4
2.4mm
K5-2.4, 0mm
Short or long adaptor for the implant
K8-L-2.4, 28mmK8-2.4 - 23mm
2.4mm
K8 - 2.4
2.4mm
K8-2.4 - 17mm
www.sgs-dental.com www.sgs-dental.com 45www.sgs-dental.com
Technical Prosthetic Holders
Implantology Tools
Surgical Instruments
Manual adaptor for
driver
Motor adaptor for
driver
K3-D
K3
K3-M
Handle for the adaptor driver
D9
D9Tissue Punch Driver
Ø4,2 mm
D17
D17
ratchet Wrench
For 6,35 mm hexagonal head.
R8
r8ratchet Torque 10 - 45ncm
For 6,35 mm hexagonal head.
R8T
r8TDepth Gauge
6
6
8
8
10
10
11,5
11,5
13
13
16
16
M+
M+Parallel Pin
L(mm)
L(mm)17
24
DP
DP
Technical Driver
K10
K10
www.sgs-dental.comwww.sgs-dental.com46
The surgical drills are available in sequential diameters. Each drill is color-coded as well as laser-etched on the upper portion of the drill. The drills are made of stainless steel.
Ø 2.5
Ø 2.4
Ø 2.0
Ø 2.0
Ø 5.5
Ø 5.5
Ø 2.8
Ø 2.8
Ø 3.2
Ø 3.2
Ø 3.7
Ø 3.7
Ø 4.0
Ø 4.0
Ø 4.5
Ø 4.5
Surgical Drills
Implant
Abutment
Swiss
Prosth
etics
Healing cap
Conical Connectio
n
Zirconium
Titanium
Drilling pro
toco
lBall a
ttachement
Premium surfa
ce
P9SSurg
ical tools
Surgical in
struments
Ratchet Hex D
river
Implanto
logy
P7N
Angular abutm
entCover s
crew
Short adapto
r
Surgical k
its
AnalogTransfe
r
Bone type
Conus platfo
rm
Internal H
ex
Bone Collecto
rDrill
s
Long warra
nty
P1
Educatio
n
Favorable pric
es
DR-1.9 marker
Dr-1.9 marker
DR-E
Dr-eDrilling extension bit
4
DR-T - 4mm
Dr-T
5
DR-T -5mm
Dr-T
Straight Drills
Conical Drills
www.sgs-dental.com www.sgs-dental.com 47www.sgs-dental.com Implant
Abutment
Swiss
Prosth
etics
Healing cap
Conical Connectio
n
Zirconium
Titanium
Drilling pro
toco
lBall a
ttachement
Premium surfa
ce
P9SSurg
ical tools
Surgical in
struments
Ratchet Hex D
river
Implanto
logy
P7N
Angular abutm
entCover s
crew
Short adapto
r
Surgical k
its
AnalogTransfe
r
Bone type
Conus platfo
rm
Internal H
ex
Bone Collecto
rDrill
s
Long warra
nty
P1
Educatio
n
Favorable pric
es
SGS Dental Implant System Holding, reg No: FL-00023FL-9494, Schaan, Landstrasse 27 Liechtenstein
Tel.: 00423 233 5050, 00423 233 5051 Fax: 00423 233 5052
SGS International Kft./Ltd. European Logistic CenterH-1047 Budapest, Károlyi István u. 1-3.
Tel: +36 1 328 0427
v2.0
www.sgs-dental.com