Nttrading articon katalog1

catalogue

www.nt-trading.com

nt-trading GmbH & Co. KG meets the requirements of

ISO 13485:2007 and the EU Directive 93/42/EEC

Health Canada Recognized Registrar CMDCAS.

MORE THAN ABUTMENT

Optimized safety and quality

Constant load according to DIN EN ISO 14801

To analyze the behavior of the material and the design of the implants on so many of these force effects and to determine the load

limits, they will be reproduced in simulations. The international standard ISO 14801 describes the test setup and the implemen

tation of such a test of fatigue limit endosseous dental implants.

We have had constant load tests for endosseous dental implants carried out for nt-trading abutments by the National Institute of

Research and Development and Measurement Technique in accordance with standard DIN EN ISO 14801. The load corresponded

to 30° angle to the implant axis. In addition, we have, in conformity with DIN EN ISO 14801 had a finite element analysis test

carried out.

-0123

3

IMPLANT SYSTEMS

E-Serie

is compatible to Nobel Biocare Replace Select® ........................... 4

F-Serie

is compatible to Nobel Biocare™ Nobel Active ™ ............................ 7

H-Serie

is compatible to Biomet 3i Certain® ....................................... 9

I-Serie

is compatible to Biomet 3i Osseotite® .................................. 11

K-Serie

is compatible to Nobel Biocare Brånemark® .............................. 12

L-Serie

is compatible to Straumann Bone Level® ................................ 13

N-Serie

is compatible to Straumann SynOct ® ................................... 15

R-Serie

is compatible to Zimmer Tapered Screw-Vent ...........................® 18

S-Serie

............................... 20

T-Serie

is compatible to Dentsply-Friadent Frialit/Xive® .......................... 22

Prosthetic tools ............................................. . . . . . . . . 25

Dentokeep .............................................................

Scan equipment .....................................................

............................

Sinter components ................................................... 2 9

Tightening torques, Conditions of warrenty ....................... . . 31

CONTENTS

is compatible to Astra Tech OsseoSpeed

26

27

28NT-milling tools and grinding tools

Notice:Products indicated with ® are registered brand names of the respective manufactures.

E-Serie | is compatible toNobel Biocare Replace Select ®

Platform 3,5 mm NP

Platform 4,3 mm RP

Platform 5,0 mm WP

Platform 6,0 mm

Titanium Basefor individual milled

Zirconium Abutment incl. screw

Abutment ScrewTitan Grade 5

Recommended tightening

torques 35 Ncm

Scan Bodyfor Titanium Base

PEEK

Scan Body 3D Guidefor Titanium Base +

2-CONnect

PEEK

Lab AnalogStainless Steel

E 800 E 810 E 820 E 830

E 00 W E 10 W E 20 W E 30 W

E 9.3D3.500 E 9.3D4.300 E 9.3D5.000 E 9.3D6.000

E 50 E 51 E 52 E 53

E 60 E 61 E 61 E 61

4

Platform 4,3 mm RP

Platform 5,0 mm WP

E 810 S E 820 S

E 810 M E 820 M

E 810 F E 820 F

N 60 N 60

E 9.3D4.300 E 9.3D5.000

E 51 E 52

2-CONnect-Base Setincl. 2-CONnect Cap and

Cap-Screw

Titan Grade 5

Cap-ScrewTitan Grade 5


torques 30 Ncm


2-CONnect

PEEK

2-CONnect-BaseTitan Grade 5


torques 35 Ncm

5

2-CONnect CapTitan Grade 5


Notice: Products indicated with R are registered brand names of the respective manufactures.

E-Serie | is compatible to Nobel Biocare Replace Select®

Notice: Products indicated with ® are registered brand names of the respective manufactures.

Straight Abutment incl. Screw GH 1,0 mm

incl. Screw

Straight Abutment

Platform

GH 2,5 mm

3,5 mm NPPlatform

4,3 mm RPPlatform

5,0 mm WP

E 100-1 E 110-1 E 120-1

E 100 E 110 E 120

6

™ F-Serie | is compatible to Nobel Biocare Nobel Active

™


Zirconium Abutment

incl. screw

Titan Grade 5



torques 35 Ncm


PEEK


2-CONnect

PEEK

F 800 F 810

F 00 W F 10 W

F 9.3D3.500 F 9.3D4.350

F 50 F 51

F 60 F 61

Platform3,5 mm NP

Platform4,3 mm / 5,0 mm RP

Notice: Products indicated with ® are registered brand names of the respective manufactures. 7


™ F-Serie | is compatible to Nobel Biocare Nobel Active™

F 800 S F 810 S

F 800 M F 810 M

F 800 F F 810 F

N 60 N 60

F 9.3D3.500 F 9.3D4.350

F 50 F 51

Platform3,5 mm NP

Platform4,3 mm / 5,0 mm RP


Cap-Screw

Titan Grade 5




torques 30 Ncm


2-CONnect

PEEK



torques 35 Ncm

Notice: Products indicated with ® are registered brand names of the respective manufactures.8


H-Serie | is compatible to Biomet 3i Certain ®

Platform3,4 mm

Platform4,1 mm

Platform5,0 mm


Zirconium Abutment

incl. screw

Titan Grade 5



torques 20 Ncm


PEEK


2-CONnect

PEEK


H 800 H 810 H 820

H 00 W H 10 W H 10 W

H 9.3D3.400 H 9.3D4.150 H 9.3D4.150

H 50 H 51 H 52

H 60 H 60 H 60


H 800 S H 810 S

H 800 M H 810 M

H 800 F H 810 F

KS 60 KS 60

H 9.3D3.400 H 9.3D4.150

H 50 H 51

Platform3,4 mm

Platform4,1 mm


Cap-Screw

Titan Grade 5


2-CONnect

PEEK



torques 20 Ncm


H-Serie | is compatible to Biomet 3i Certain®

10




torques 15 Ncm


I-Serie | is compatible to Biomet 3i Osseotite ®


Zirconium Abutment

incl. screw

Titan Grade 5



torques 35 Ncm


PEEK


2-CONnect

PEEK

I 800 I 810 I 820

I 00 W I 10 W I 10 W

I 9.3D3.400 I 9.3D4.150 I 9.3D4.150

I 50 I 51 I 52

I 61 I 61 I 61

Platform3,4 mm

Platform4,1 mm

Platform5,0 mm




Zirconium Abutment

incl. screw

Titan Grade 5



torques 35 Ncm


PEEK

K 800 K 810 K 820

K 00 W K 10 W K 20 W

K 9.3D3.500 K 9.3D4.100 K 9.3D5.100

K 50 K 51 K 52

K 110

K 60 K 61 K62

Platform3,5 mm

Platform4,1 mm

Platform5,1 mm


K-Serie | is compatible to Nobel Biocare Branemark®

12


2-CONnect

PEEK


Straight Abutmentincl. Screw

GH 2,5 mm

L-Serie | is compatible to Straumann Bone Level®


Zirconium Abutment

incl. screw

Titan Grade 5



torques 35 Ncm


PEEK


2-CONnect

PEEK

L 800 L 810

L 00 W L 10 W

L 9.3D3.300 L 9.3D4.148

L 50 L 51

L 60 L 60

Platform3,3 mm NC

Platform4,1 mm / 4,8 mm RC



L-Serie | is compatible to Straumann Bone Level®

L 800 S L 810 S

L 800 M L 810 M

L 800 F L 810 F

N 60 N 60

L 9.3D3.300 L 9.3D4.148

L 50 L 51

Platform3,3 mm NC

Platform4,1 mm / 4,8 mm RC


Cap-Screw

Titan Grade 5



torques 30 Ncm


2-CONnect

PEEK



torques 35 Ncm






Zirconium Abutment

incl. screw

Titan Grade 5



torques 35 Ncm


PEEK


2-CONnect

PEEK


3,5 mm NNPlatform

4,8 mm RNPlatform

6,5 mm WN

N 800 N 810 N 820

N 00 W N 10 W N 20 W

N 9.3D3.500 N 9.3D4.800 N 9.3D6.500

N 50 N 51 N 52

N 60 N 62 N 62

N-Serie | is compatible to Straumann SynOcta®

15

Platform 4,8 mm RN

Platform 6,5 mm WN


N 810 S N 820 S

N 810 M N 820 M

N 810 F N 820 F

N 60 N 60

N 9.3D4.800 N 9.3D6.500

N 51 N 52


Cap-Screw

Titan Grade 5



torques 30 Ncm


2-CONnect

PEEK



torques 35 Ncm

N-Serie | is compatible to Straumann SynOcta®

16




Recom. tight. torques 35 Ncm

Straight Abutment incl. Screw

Angled Abutment

16°angled over surface

incl. Screw

N 110 N 110 L N 120

N 210-1 N 210-1

N 210-2 N 210-2

N 61 N 61 N 61

N 110-40 N 110-55 N 110-70

N 120-55

T

otal height

4,0 mmPlatform 4,8 mm RN

Platform 6,5 mm WN

Platform 4,8 mm RN

Platform 4,8 mm RN

Total height 5,5 mm

Total height 5,5 mm

Platform 6,5 mm WN

Total height 7,0 mm

17

RN-Massiv Abutmentonly for Dentist

WN-Massiv Abutmentonly for Dentist

Angled Abutment

16°angled over edge

incl. Screw


Zirconium Abutment

incl. screw

Titan Grade 5

Abutment ScrewHex 0,50“ (1,26 mm)


torques 30 Ncm


PEEK


2-CONnect

PEEK

R 800 R 810 R 820

R 00 W R 10 W R 20 W

R 9.3D3.500 R 9.3D4.500 R 9.3D5.700

R 50 R 51 R 52

R 60 R 60 R 60

Platform 3,5 mm

Platform 4,5 mm

Platform 5,7 mm


R-Serie | is compatible to Zimmer Tapered Screw-Vent®

18


Platform 3,5 mm

Platform 4,5 mm

R 800 S R 810 S

R 800 M R 810 M

R 800 F R 810 F

N 60 N 60

R 9.3D3.500 R 9.3D4.500

R 50 R 51


Cap-Screw

Titan Grade 5



torques 25 Ncm


2-CONnect

PEEK



torques 30 Ncm




S-Serie | is compatible to Astra Tech OsseoSpeed®


Zirconium Abutment

incl. screw

Titan Grade 5


Zirconium Abutment

incl. screw

Titan Grade 5


2-CONnect

PEEK

3,5 mm / 4,0 mmPlatform

4,5 mm / 5,0 mm

S 800 S 820

S 00 W S 20 W

S 9.3D3.540 S 9.3D4.550

S 50 S 52

S 100

S 60 S 61




GH 1,5 mm



torques 25 Ncm

Platform 3,5 mm / 4,0 mm

Platform 4,5 mm / 5,0 mm

S 800 S S 820 S

S 800 M S 820 M

S 800 F S 820 F

N 60 N 60

S 9.3D3.540 S 9.3D4.550

S 50 S 52


Cap-Screw

Titan Grade 5



torques 20 Ncm


2-CONnect

PEEK



torques 25 Ncm


21



Platform3,4 mm

Platform3,8 mm

Platform4,5 mm

Platform5,5 mm


Zirconium Abutment

incl. screw

Titan Grade 5



torques 25 Ncm


PEEK


2-CONnect

PEEK

T 800 T 805 T 810 T 820

T 00 W T 05 W T 10 W T 10 W

T 9.3D3.400 T 9.3D3.800 T 9.3D4.555 T 9.3D4.555

T 50 T 55 T 51 T 52

T 60 T 60 T 60 T 60


T-Serie | is compatible to Dentsply-Friadent Frialit/Xive®

22


Platform3,4 mm

Platform3,8 mm

Platform4,5 mm

T 800 S T 805 S T 810 S

T 800 M T 805 M T 810 M

T 800 F T 805 F T 810 F

KS 60 N 60 N 60

T 9.3D3.400 T 9.3D3.800 T 9.3D4.555

T 50 T 55 T 51


Cap-Screw

Titan Grade 5



torques 15 Ncm


2-CONnect

PEEK




torques 25 Ncm



T-Serie | is compatible to Dentsply-Friadent Frialit/Xive ®

Abutment ScrewHex 0,50“ (1,26 mm)


Platform

torques 25 Ncm

3,8 mmPlatform4,5 mm

T 205-2-1

T 205-1-1

T 205-1

T 105-1 T 110-1

T 105 T 110

T 60 T 60


Angled Abutment

16°angled over edge

GH 1,0 mm

Angled Abutment


GH 1,0 mm

Angled Abutment


GH 2,5 mm


GH 1,0 mm


GH 2,5 mm

Prosthetic Tools

Laboratory

Screwdriverfor changeable inserts

(without ISO-Shaft)

ISO-Shaft Connection

W 11.000.000

W 11.100.000

W 11.IRS.G10

W 11.TH0.G20

W 11.Y00.G30

W 11.LN0.G40

W 11.EFK.G50

W 11.005.G60

25

Torque Ratchetcontinuously adjustable

to max. 40 Ncm

ISO-Shaft Connection

Insertfor Laboratory Screwdriver

and Torque Ratchet

ISO-Shaft for S-, I- and R-Series

Hex 0,50“ (1,26 mm)


and Torque Ratchet

ISO-Shaft for T- and H-Series

Hex 1,20 mm


and Torque Ratchet

ISO-Shaft for AnkylosR

Hex 1,00 mm


and Torque Ratchet

ISO-Shaft for L- and N-Series

Torx T6


and Torque Ratchet

ISO-Shaft for E-, F- and

K-Serie UG


and Torque Ratchet ISO-Shaft

for 2-CONnect-Base-Primary

Dentokeep PEEK Disc

DentokeepPEEK Disc

Size 14 mm

PEEK Disc

Dentokeep

Size 18 mm

12.000.P14

12.000.P18

26

Dentokeepnt-trading Dentokeep Disc PEEK are blanks for technical milling manufacture of permanent dentures and prosthetic brace in

the CAM process. The derived prosthetic designs are available on the remaining teeth, - can be attached to stumps and / or

implant abutment and provide a basic functional and aesthetic care.

1. PEEK Disc 98.5 mm, pearl white, 14 mm and 18 mm thick

2. For CAD / CAM Technology for CAD/CAM Technology

3. Clip in prosthetics CAD/CAM

4. Class II product for permanent prosthetic restorations

dental cad cam systems

nt-trading GmbH & Co. KG | Esso-Str. 16 | 76187 Karlsruhe | Germany

Phone: +49 (0) 721 / 91 54 71 - 60 | [email protected] | www.nt-trading.comPC

-E/E

-2011

-06

Артикон © 2005-2012119334, Россия, Москва,

Донской 5-й проезд, д.15, стр. 5 +7 (495) 221-50-52articon-dental.com

e-mail: [email protected]

Health & Medicine

Nttrading articon katalog1