Coa-Comp M Automatic Bipolar Electrocoagulator

The Coa-Comp M is recommended for haemostasis in: •General Surgery

•Orthopaedic •Dermatologic •Vascular •Thyroid •ENT

•Plastic •Paediatric •Thoracic

•Lightweight

•Highly Portable •Rapid setup time

Ideal for any surgical environment demanding precise bipolar coagulation

Problem Free Coagulation Heating begins when the blood vessel is grasped between the forceps and ceases when full coagulation is achieved. The advanced computerised monitoring system continuously analyses variations in tissue impedance during coagulation. The generator stops producing bipolar energy when specific impedance parameters are met. As a result the generator stops coagulation before the tissue is over-coagulated thereby enhancing the characteristics of bipolar instruments. •No sticking

•No charring

Easy Information Access Activation of the Coa-Comp M is confirmed with an LED display and adjustable audible tone. The alphanumeric display provides information to the operator as to operating mode, power level, cable/forcep test and the result s of built in self tests. Automatic Tests and Self Monitoring The operator can easily test the Coa-Comp M to assure that it is functioning properly. Simply press the forceps together and read the result on the alphanumeric display. The Coa-Comp M also continually monitors its own functioning.

Testimonial for Coa-Comp M Bipolar Diathermy “Declarations of Interest? You bet! The Coa-Comp M bipolar diathermy unit is streets ahead of the competition – and has been for 20 years! You’ve not heard of it? Well obviously you haven’t worked in Cardiff – because we have six Coa-Comp machines, but I understand – it’s a funny name (the manufacturer is Swedish) and until now the machine was rarely promoted in the UK! It is time you tried one of these wonderful machines! They ‘fly by wire’ and automatically sense the need to coagulate tissue between the bipolar forceps and stop the current when coagulation is complete. ‘Simple’! No foot pedal required. I’ve tried all the other machines (Medical Physicists in Cardiff test all diathermy machines in the UK for the Department of Health) and nothing else comes close.” Dr Richard Motley Welsh Institute of Dermatology Cardiff CF14 4XW

Specifications Input: Class 1, 110-120V, 220-240V, 50-60 Hz Power: 10VA at stand-by, 90 VA at full output. Output: Coagulation current frequency (512 +/- 0.050) KHZ. Power: 2- 36W at 100 Ohm, selectable in five steps. Cardiac floating: Type CF. HF leakage current less than 15mA through Ohms. Size: 6” x 8” x 4” (WxDxH) excluding handle. Weight: 5lbs. 13 oz.

BH/7-809-1 Pack size: 1 £119 excl.VAT Reusable bipolar forceps and cable. Forcep length 11cm.

Recommended Accessories

SCH-ES-100 Pack size: 20 £379 excl.VAT Single use, individually sterile wrapped bipolar forceps and cable.

For more information call us on 020 8368 1642 or email info@schuco.co.uk