Embed Size (px)
Citation preview
Association of Energy Engineers
World Energy Engineering Congress
Atlanta, USA
September 27-29, 2017
Closing the gap for optimal building energy
performance through an
ISO 50001 Energy Management System
Presented by:
Mike Brogan, B.E., PhD (Mech Eng.), MIEI
CEO
+1 347 230 5887 / +353 91 709818 www.enerit.com
QSET software
Energy consultants large MNC’s
(IS 393 software)
Members EN/ISO 50001 committees
First installs: buildings & industry
EN 16001
software
deployed
Enerit ISO 50001 software launched
1995 2004 2006 2008 2010 2011 2017
Enerit Founded
20+ years in
Management System SoftwareISO 9001, ISO 14001, OHSAS 18001
Drafting of ISO 50001:2018
Release of ISO 50001:2011
The Energy Performance “GAP” between the Design and Operation of a Building always exists!
Differences between expected and actual energy consumption arise from problems with the design, construction, commissioning and operation of buildings.
Interventions along any of the three fundamentals life-cycle directions; design, build and operation can reduce this GAP
The gap, which often exceeds 50%, can be caused by erroneous simulations during design, poor constructions methods and bad operational practices.
Usually the bigger gaps arise from numerous operationalissues that deteriorate the performance well beyond expectations.
The Energy Performance “GAP” between the Design and Operation of a Building always exists!
“Highly Innovative Building Control Tools tackling the energy performance gap”
Tools include:
➢ data acquisition
➢ building simulation
➢ energy management
➢ forecasting
Project aims:
❖ To reduce the energy gap between
predicted and real building
performances, focusing on the
operation phase
❖ To propose a new paradigm for the
development of energy management
platform in buildings, integrating
existing expertise and resources
❖ To provide a smart open platform
which is marketable
➢ FDD
➢ renewable energy
➢ behavior modelling
➢ data visualization
Expected Results:
❖ a generic and modular platform integrating associated services based on data collection at building level.
❖ adaptable to allow third-party suppliers to develop own modules
❖ an ‘Apps Store’ for users to get apps to operate better buildings
Companies working in the field of energy efficiency
Engineers: providers of BMS technology, ICT professionals,
maintenance staff
Research communities and clusters,
Other H2020 projects – e.g. BUILT2SPEC
Regional politicians & citizens’ representation bodies
Standardisation bodies and certifiers of technology
General public and the media.
Who can Benefit?
Project Partners
Enerit ISO 50001 software customised for H2G Energy Management Module
In HIT2GAP, an effective Energy Management System (EnMS) is central to the overall process.
The HIT2GAP platform will offer a devoted tool for Energy Management that will be independent from the building’s type or size, as well as from any specific technology.
Alongside energy monitoring and energy data reporting systems, Enerit software deals with opportunities, plans, actions, communication and documents for ISO 50001 in a cloud-based workflow solution.
Plug-in Energy Management Module
The Energy Management (EM) functionality will be available as a plug-in moduleproviding for the day-to-day operation of the building EnMS.
The EM module will help building owners/managers to:
Increase energy savings through better organization and teamwork
Take the risk out of the ISO 50001 certification process
Save time during certification process & maintain it in the long-term
Upgrade from spreadsheets to real workflow, maximizing time and energy efficiency
Integrate energy monitoring systems to generate meaningful management reports
The HIT2GAP EM module covers the Technicaland Management aspects of ISO 50001
The Energy Planning & Monitoring includes:o Energy Performance management by carrying out an Energy Review
to analysis energy data and identify and monitor EnPIs.
The energy review
is visualized using
the integrated
Sankey diagrams
Energy Planning & Monitoring (cntd.)
Baselines are identified and EnPIs are monitored based on consumption and activity data
The HIT2GAP EM module covers the Technicaland Management aspects of ISO 50001 (cntd.)
Action Management to help make informed decisions on Improvement Opportunities (IOs) and Action Plans to meet Objectives & Targets (O&T).
The HIT2GAP EM module covers the Technicaland Management aspects of ISO 50001 (cntd.)
Energy Planning & Monitoring (cntd.)
ISO 50001 Management System
supports the management of ISO 50001 processes and information (Document Management (Docs), Audits, Meetings (Mgt), Non-conformities (NCs)) to achieve control and continuous improvement of the EnMS and energy performance.
ISO 50001 Management System
supports the management of ISO 50001 processes and information; Document Management (Docs), Audits, Meetings (Mgt) and Non-conformities (NCs) to achieve control and continuous improvement of the EnMS and energy performance.
Testing & Validation
The HIT2GAP platform will be tested and validated at selected pilot buildings
The Energy Management module has already been installed at these 3 pilot buildings
Pilot Projects: 1
Offices & Laboratories,
Nanogune, Spain:
− PV panels
− BMS to control lighting
and HVAC
Pilot Projects: 2
Challenger - Office building,
France
− PV panels & dual solar panels
− Ground source heat pump
− BMS controls lighting, HVAC,
hot & cold water & technical
alarms
Pilot Projects: 3
Public Office building,
Warsaw City Council,
Poland
− BMS controlled lighting
& HVAC
Pilot Projects: 4
Teaching and research
building, Ireland
− BMS controlling HVAC
− Lighting controls with lux
adjustment
− Uses district heating
network
Testing & Validation
❖ The HIT2GAP Project is ongoing and completion is September 2019.
The HIT2GAP project (Highly Innovative building control Tools Tackling the energy
performance GAP) has received funding from the European Union’s Horizon 2020
research and innovation program under grant agreement N° 680708. www.hit2gap.eu
Thank You
Mike Brogan
+1 347 230 5887 / +353 91 709818
www.enerit.com
Questions?
