SMART CITIES RUN ON ELECTRIC WIREMINOS SYSTEM: The new era of lighting

What is Minos System?

The system that changes the management and use of outdoor lighting grids. With just a click and wherever you are.

It allows you to constantly monitor systems‘ status, obtain operation reports in real time, and decide with flexibility when, where and how much you wish to switch on, switch off or dim every unit.

It transforms lighting systems into a new territorial network and the lamp into an intelligent support capable of activating a wide range of services to improve the quality of life and make the cities smart, safe and sustainable.

Advantages & benefitsENERGY SAVINGSIt reduces energy consumption between 30% and 45% through on / off switching and dimming of every single lamp.

ENVIRONMENT FRIENDLYNESSIt helps to reduce greenhouse gas emissions and light pollution.

REAL-TIME MAINENANCEIt supplies information about systems‘ status in real time, allows swift, targeted maintenance and improves the quality of service.

RAPID PAYBACKThrough constant, programmed use of the system, it ensures short payback and generates new revenues.

SAFETY AND SECURITYIt guaranties provision of the right amount of light exactly where it is needed.

INTEGRATED SERVICESIt transforms the power supply network and lamps into a smart grid capable of delivering additional services.

ENERGY SAVING

ENVIRONMENT FRENDLY

REAL-TIME MAINTENANCE

RAPID PAYBACK

SAFETY AND SECURITY

INTEGRATED SERVICES

Applications

Towns, railway stations, motorways, airports, ports, car-parks .... Wherever there is a lighting grid and a light fitting, Minos System can create savings, efficiency and new services. Guaranteeing the highest level of compatibility with the existing technology in all contexts, based on more than 32 years experience.

Railway stations

Architectural lighting

Car park lighting

Tunnels

PortsSports arenas Airports

Motorways

Public lighting

Savings & environmentMinos System helps to protect the environment and works towards the targets set by the international standards. Through the reduction of energy consumption and targeted scheduling of maintenance work, it helps to reduce atmospheric green-house gas emissions, prevents the possible emission of waste products into the air by failed lights and increases their average lifetime.

Moreover, thanks to point-to-point remote management, it allows personalized decisions as to how, where and how much to save, improving efficiency and quality of service.

ENERGY SAVINGS• System on / off by means of

astronomical clock and dimming every single light

• Operating cycle optimization• Eliminating of daytime operation for

troubleshooting• Reduction in line losses due to low

power factor

EFFICIENT MAINTENANCE• Real-time identification of failed

elements• Optimization of intervention times• Optimization of inventory and vehicle

management• Elimination of troubleshooting costs• Prevention of claims

Plug & Play Architecture

Minos System is a flexible, modular system designed to adapt to any lighting system. Its ‘open‘ architecture allows software and hardware devices to be added to enable a whole world of innovative services and offer a solution tailored to the user‘s needs. Minos System operates on the Power Line principle, using the electric lines that supply the lamp, for even high-speed transfer of data and information.

There is no need for additional wiring.

SoftwareMinos X

IOS Server

Electrical Panel

Syra

Internetor GPRS

PowerLineAndros

Remote lighting management

CCTV

Emergency alerts

Waste depot security

Weather stations

Electric vehicle charging

Pollution monitoring

Digital signage

WiFi

Car park management

Traffic info

Remote meter reading

Supervision softwareFull control is just a click away, wherever you are. Minos-X is the remote management software designed to offer all the benefits of the internet. You can view all events, program operating cycles and receive detailed operation reports.

MAIN FUNCTIONS

• Display of all lighting system events• Automatic statistics for historic data analysis• Programming of lighting system• Programming of switch-on, switch-off and dimming of every light fitting• Loading of ID records for every panel and lamp in the system• Creation of emergency numbers for sending message alarms to the

maintenance engineer• Data import / export in Xml or Web services format• Integrated service management

Remote metering ofelectricity, water andgas consumption

Traffic monitoring

System mapping

CONTACT US FOR AN ENERGY SAVING APPOINTMENT

Central address and telephone number:

Marja van Megen790 Route d’Annecy 74600 Quintal France

T +33 457 413 141E info@wesavepower.com