Upload
vivekanand-gaikwad
View
688
Download
2
Embed Size (px)
DESCRIPTION
The present project deals wireless technology in the hotel management area. The present system working is very tedious process ordering to one person sending that with another person to kitchen sending the same to the cashier. this total procedure will be wind up by using this project. By using zigbee technology we can reduce the man power in the hotels and also it reduces the wastage time. The system uses a compact circuitry built around Flash version of AT89S52 microcontroller with a non-volatile memory capable of retaining the password data for over ten years. Programs are developed in embedded C. ISP is used to dump the code into the microcontroller
Citation preview
GLOBALLIANZ SOLUTION 9021077617
Touch panel based Modern restaurants atomization using ZigBee technology
ABSTRACT
Aim:
The main objective of this project is to develop an embedded system which is a
wireless dish ordering system at hotels by using zigbee technology and touch panel.
Implementation:
This project is implemented 8051 based At89s52 developed board interfaced is
interfaced with touch panel, zigbee wireless modules
BLOCK DIAGRAM:
MAX232
Touch panel ZIGBEE
MODULE
MICROCONTROLLER
AT89S52
RPS
CRYSTAL
GLOBALLIANZ SOLUTION 9021077617
POWER SUPPLY:
DESCRIPTION:
The present project deals wireless technology in the hotel management area. The
present system working is very tedious process ordering to one person sending that
with another person to kitchen sending the same to the cashier. this total procedure
Step DownTransformer
BridgeRectifier
FilterCircuit
Regulator section
MAX232
LCD
ZIGBEE MODULE
MICROCONTROLLER
AT89S52
RPS
CRYSTAL
GLOBALLIANZ SOLUTION 9021077617
will be wind up by using this project. By using zigbee technology we can reduce the man
power in the hotels and also it reduces the wastage time.
The system uses a compact circuitry built around Flash version of AT89S52
microcontroller with a non-volatile memory capable of retaining the password data for
over ten years. Programs are developed in embedded C. ISP is used to dump the code
into the microcontroller
SOFTWARE:
Embedded ‘C’
RIDE to write code
ISP to burn the chip
HARDWARE:
At89s52 based our own developed board
Power Supply
Zigbee Module
Touch panel
ADVANTAGES: Low cost, automated operation, Low Power consumption.
REFERENCES
1. The 8051 micro controller and embedded systems by Mazidi.
2. www.wikipedia.org
3. WWW.atmel.com
4. www.8051projects.com
5. Embedded systems with 8051 by kenith j ayala