Embed Size (px)
Citation preview
Piling Mandrels – supports pile and vibroSide Sleeves Side Mandrels Internal mandrels
We work with Clients that are seeking to:
1. Broaden the scope of their activities
2. Keep abreast of the latest developments in Plastic Piling and methods
3. Reduce maintenance costs through the substitution of timber with plastic products
4. Give the latest designs in plastic piling ago, perhaps after historically having issues with earlier designs.
5. Move away from budget plastic piling
This presentation aims to provide a summary update on the us of piling mandrels used to facilitate the installation of plastic sheet piling.
If you require more information please contact us directly
@plasticpiling@jetfiltereurope
@thehammermanco
Telephone0845 5195197 / 01543 677290
07775 710648
www.jetfiltereurope.co.uk
The Hammerman Equipment
THE Plastic Piling Company
JETFilter Europe
Our social media channels are typically split according to our three principle product categories, JETFilters, Plastic
Piling and Pile driving equipment.
Please feel free to follow all or just the ones that pertain to your primary interest as each typically will focus on that specific
product range.
The Hammerman Equipment
Offers a range of piling equipment for hire and sale
• Handheld pile and post drivers• Piling mandrels• EMS Series Piling Vibrators
THE Plastic Piling Company
Offers a range of plastic sheet piling as used for
• Flood defences and breach repairs• Retaining walls• Control structures• Erosion control & Scour protection• Bank support• Seawalls
JETFilter Europe JETFilters – The maintainable weephole filter• Three sizes 2 ½” 4” and 6”• All available in 316 Stainless steel & ASTM A-36 Steel• The 2 ½ “ also available in ABS Plastic
Slide Sleeves
•Basic steel strengtheners
•Only overlaps on interlock
•Useful on budget light duty piling
•Limited to around 2-3m
•Must always be shorter than pile – plugging
•Easily suits different sheets
Slide Sleeves
•Basic steel strengtheners
•Only overlaps on interlock
•Useful on budget light duty piling
•Limited to around 2-3m
•Must always be shorter than pile – plugging
•Easily suits different sheets
Side Mandrels
•Provides top and side support
•Prevents sheet buckling
• Safer than rear mandrels
• Works ahead of the pile
•Requires quite large equipment
•Heavy
•Expensive to produce
•Suit narrow range of sheets
Side Mandrels
•Provides top and side support
•Prevents sheet buckling
• Safer than rear mandrels
• Works ahead of the pile
•Requires quite large equipment
•Heavy
•Expensive to produce
•Suit narrow range of sheets
Internal Mandrels
•Consists of two steel tubes with closed pointed toes
•Only for advanced range of piles
•Light weight minimises equipment size
•Internal backbone allow greater downcrowd
•Extends beyond pile and reduced toe friction and plugging
Internal Mandrels
•Only for advanced range of piles
•Light weight minimises equipment size
•Internal backbone allow greater downcrowd
•Extends beyond pile and reduced toe friction and plugging
This video clip illustrates the
principle of the internal mandrel. In fact was the first use
of the internal mandrel with the
Environment Agency at Fradley.
This is a continuation of the Fradley contract what is good about this video is that the driven clearly is not easy, but the pile driven through some very hard bands.
Also upon extraction of the mandrel, the pile remains in
the ground. No need to have a re-drive method.
This video is taken from the installation of MultiLock plastic piling on the M1 motorway.
Installation again using an internal mandrel and EMV300
Internal mandrels work really well with leader rigs. This clip showing the installation of 11m MultiLock
BSP BH120
New Hydraulic impact hammer for Back driving
Remaining Issues
The main issues that relate today are:
Selecting the right pile for the job
Getting in equipment that is powerful enough for the task
Vibrator biased
@plasticpiling@jetfiltereurope
@thehammermanco
Telephone0845 5195197 / 01543 677290
07775 710648
www.jetfiltereurope.co.uk
If after watching this presentation you have specific question that has not been answered or require a quotation you can contact us using the details below, or through our social media channels.
