ENGR. MICHAEL E. CRUZMobile No. 055-515-2778

E-mail Add: mikecruz1974@yahoo.com

POSITION APPLIED FOR: M.E.P. ENGINEER

OBJECTIVE: To manifest and enhance my knowledge, potential and versatility as a Mechanical Engineer. To contribute and participate to the Industry’s continuous progress and future growth through my mechanical expertise.

EDUCATION: Bachelor of Science in Mechanical EngineeringCentral Luzon Polytechnic CollegeCabanatuan City, Nueva Ecija, Philippines1991 – 1996

WORK EXPERIENCE:

Company: Fibrex Construction Group LLC P.O. Box 462, Musaffah Industrial Area, Abu Dhabi, UAE

Position: MEP Estimator (Tender/Estimation Department) November 15, 2014 - Present

Since 1972, Fibrex Construction Group has evolved into one of the major turnkey construction groups in the region handling projects in the Gulf and across the Middle East of various categories ranging from residential, commercial, leisure, private, governmental and educational categories. Its 12,000 experienced personnel are backed up by a fleet costing over AED 250 million in heavy machinery and equipment that will make sure all your construction needs to build your future projects are secured.

Duties and Responsibilities:

Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.

Estimate/Take Quantity of Electrical Services specifically in Power-Cable, Power-Socket, Lightning Protection System, Lighting System and Extra-Low Voltage System.

Analyzes and reviews scope of work of Tender Project. Prepare clarifications/queries to consultant or client regarding tender project. Prepare Request for Proposal (RFP) for M.E.P. Contractors. Identify all equipments/material type used for tender projects. Interpret and follow company tendering processes and procedures to ensure

that all aspects of tenders are met. Performed other duties that were assigned from time to time.

Involved in Successful Tendered Projects:

Shams Meera Residential ApartmentsProject Description: 3 Basement + Ground Floor + Twin Tower (26th Floor)Project Cost: 258 Million (Civil & MEP)

Khalifa University Extension Phase 1Project Description: Construction of 5 School Buildings (G + 5th + Roof)Project Cost: 569 Million (Civil & MEP)

Company: Arabian International Company (AIC) P.O. Box 66862, Business Bay, Dubai, UAE

Position: MEP Estimator (Tender/Estimation Department) August 10, 2014 – October 23, 2014

Arabian International Company for Steel Structures (AIC) is a leading designer, fabricator and erector of structural steel and towers and is a member of the Attieh Group of companies. The Attieh Steel Group is the largest steel stockiest in the Middle East.

Duties and Responsibilities:

Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.

Estimate/Take Quantity of Electrical Services specifically in Power-Cable, Power-Socket, Lightning Protection System, Lighting System and Extra-Low Voltage System.

Analyzes and reviews scope of work of Tender Project. Prepare clarifications/queries to consultant or client regarding tender project. Prepare Request for Proposal (RFP) for M.E.P. Contractors. Identify all equipments/material type used for tender projects. Interpret and follow company tendering processes and procedures to ensure

that all aspects of tenders are met. Performed other duties that were assigned from time to time.

Company: Al Jaber Group P. O. Box 2175, Abu Dhabi, UAE

Position: Mechanical Engineer (Tender/ Estimation Department)

April 11, 2012 – July 25, 2014

Al Jaber Group (AJC), established in 1970, is a privately owned multi-faceted group of companies, based in Abu Dhabi. AJC provides its professional services in the sectors of Construction, Heavy Lifting & Logistics, Industrial and Trading. Al Jaber Group demonstrates outstanding capabilities through utilizing varied divisions and resources within the Group to support and complement each other.

Duties and Responsibilities:

Estimate/Take Quantity of Mechanical Services specifically in HVAC, WATER SUPPLY, DRAINAGE, FIRE FIGHTING and LPG System.

Estimate/Take Quantity of Electrical Services specifically in Power-Cable, Power-Socket, Lightning Protection System, Lighting System and Extra-Low Voltage System.

Analyzes and reviews scope of work of Tender Project. Prepare clarifications/queries to consultant or client regarding tender project. Prepare Request for Proposal (RFP) for M.E.P. Contractors. Identify all equipments/material type used for tender projects. Review/Checked B.O.Q. against system drawings. Checked/Analyzed if there is a case of revisions/addendum for tender project. Prepare Request for Quotation (RFQ) in M.E.P. Suppliers. Verify quotations in M.E.P. suppliers if this is in accordance with the technical

specifications. Interpret and follow company tendering processes and procedures to ensure

that all aspects of tenders are met. Performed other duties that were assigned from time to time.

Involved in Successful Tendered Projects:

Saadiyat Beach Villa Phase 2Project Description: Construction of 77 VillasProject Cost: 252 Million (Civil & MEP)

ENEC Guest House & Visitor CenterProject Description: Construction of Main Building A, Hotel Wings B, C, D, & E and Ancillary BuildingsProject Cost: 190 Million (Civil & MEP)

HIDD AL SAADIYAT VILLASProject Description: Compose of 462 Luxury Villa, 2 Community Center & 1 MosqueProject Cost: 1.8 Billion (Civil & MEP)

ADNOC – PETROLEUM INSTITUTE & RESEARCH CENTER

Project Description: Laboratory & School Building (1 Basement + GF + 3 Floors + Roof)Project Cost: AED 185 Million (Civil & MEP)

Company: Thermo L.L.C. (MEP Contracting)

P.O. Box 46508, Abu Dhabi, UAE

Position: Mechanical Engineer (Estimation Department) April 8, 2008 – March 31, 2012

Thermo LLC is a reputable company which has been committed in delivering quality engineering with professionalism and reliability particularly in the field of Mechanical, Electrical and Plumbing since 1976. The company offers comprehensive services as a single and multi-service Engineering Contractor for both small and large projects such as Towers, Hotels, Schools, Hospitals, Residential/Commercial or special projects like Data Center, District Cooling and Laboratories.

Duties and Responsibilities:

Estimate/Take Quantity of Mechanical Services specifically in Heating Ventilating & Air Conditioning System, Water Supply System, Drainage System and Fire Fighting System for High Rise Towers, Office Buildings, Hotel and Resorts, Housing and Villas, Educational Facilities, Mixed Use Developments and Healthcare Facilities.

Estimate/Take Quantity of Electrical Services specifically in Extra Low Voltage System, Lighting System, Power Sockets and Lightning Protection for High Rise Towers, Office Buildings, Hotel and Resorts, Housing and Villas, Educational Facilities, Mixed Use Developments and Healthcare Facilities.

Analyzes and reviews tender documents issued by the Consultant for the preparation and submission of bid to the company’s prospective client.

Reviews and analyzes old drawings if there is a case of some revisions or addendum drawings.

Prepares tender documentation queries to consultants / clients to confirm and collect any missing data and drawings.

Coordinate and undertake the interpretation and review of system drawings to identify any difference in tender requirements and raise queries against specifications.

Reviews Bill of Quantity against system drawings. Identify material types and quantities, then prepare equipment list for cost

estimation. Area calculation of the approved tender project. Make quotations from different suppliers and check/review if the materials

are in accordance with the technical specifications. Interpret and follow company tendering processes and procedures to ensure

that all aspects of tenders are met. Performed other duties that were assigned from time to time.

Involved in Successful Tendered Projects:

Bridgeway Mixed Used DevelopmentProject Description: 2 Level Basement Parking + GF + MZ + 9 Level Hotel & 10 Level Apartment Building.Project Cost: AED 177.5 Million

Shams Gate District Towers 3 to 8Project Description: 3 Level Basement Carpark + 6 Level Podium + 4 Residential Towers, 1 Hotel Tower & 1 Office Tower.Project Cost: AED 1.35 Billion

Beach Tower at Plot S5 – C13 Shams, Abu DhabiProject Description: 1 Basement + 3 Level Carpark + 2 Residential TowerProject Cost: AED 98 Million

ADISC – Residential Leisure & Commercial Compound – VillasProject Description: Consist of 385 Nos. of Villas

Project Cost: AED 183.75 Million

Central Market – Redevelopment Retail Podium & Basement CarparksProject Description: 5 Level Basement Carpark + 7 Level Retail AreaProject Cost: AED 270 Million

Abu Dhabi Future School Program – Package 5Project Description: 4 Schools in Different Location in Al Ain, U.A.E.Project Cost: AED 125 Million

Masdar Institute of Science and Technology (MIST 1B)Project Description: (Undercroft + Low/High Level Podium + Level 1 to 4) Laboratory & Accommodation BuildingProject Cost: AED 205 Million

Masdar Institute of Science and Technology (MIST 1C)Project Description: Shell & Core Office BuildingProject Cost: AED 30 Million

Shah Gas Development Package 2 & 3Project Description: Substation and Shelter HouseProject Cost: AED 33 Million

Shah Gas Development Package 10 Non Process BuildingProject Description: 19 Nos. Facility Buildings + External WorksProject Cost: AED 136 Million

Company: National Irrigation Administration CLSU Compound, Muñoz, Nueva Ecija, Philippines

Position: Engineering Assistant A January 12, 1998 – July 31, 2006

Duties and Responsibilities:

Warehouse Department/Store Keeper Department Supervised the warehouse for overall operations. Received spare parts as per purchase order and specifications. Conducted weekly, monthly and yearly inventory. Prepared daily, weekly and monthly report. Monitor all the status of the spare parts.

Repair and Maintenance Section: Perform Preventive Maintenance Schedule for every light and heavy

equipment Supervised all personnel while performing mechanical works. Monitored all incoming and outgoing mechanical parts in the shop. Prepared daily, weekly and monthly report. Monitored section’s operational status. Performed other duties that were assigned from time to time

Monitoring and Evaluation Section:

Supervised all operators and drivers in field operation. Monitored deployment of different types of light and heavy equipment. Prepared trip tickets and daily equipment reports. Performed other duties that were assigned from time to time.

Company: Plastic City Corporation Valenzuela, Metro Manila, Philippines

Position: Cadet Engineer / Quality Control Engineer May 7, 1997 – December 9, 1997

Duties and Responsibilities: Supervised all operators in their designated machine. Performed quality inspection in each product. Prepared daily, weekly and monthly report. Performed other duties that were assigned from time to time.

Company: Meralco Industrial Engineering Services Corporation

Morong, Bataan, Philippines

Position: Engineer Trainee April 15, 1996 – April 15, 1997

Duties and Responsibilities:

Maintained plant safety. Monitored the efficiency of a motor generator. Routine checked-up of plant operation. Monitored voltmeter and wattmeter readings. Reported breakdown amperage deficiency noted during operation. Performed other duties that were assigned from time to time.

SEMINARS AND TRAININGS ATTENTED:

Reconstructive Maintenance WeldingJune 11, 2002Conducted by: CRO-MAGNON CORP.

Auto ElectricityJune 15 – November 10, 1999Conducted by: P.M.T.C., Cabanatuan City

Auto Engine MechanicApril 12 – June 14, 1999Conducted by: P.M.T.C., Cabanatuan City

Lubrication SeminarMarch 25, 1999Conducted by: Continental Oil Company of Houston, Texas

SPECIAL SKILLS:

Computer Literate – MS Office (MS WORD and EXCEL) Familiar in AutoCAD Software Familiar in PlanSwift Professional Viewer Software Good Typing Ability Having U.A.E. Driving License

PERSONAL INFORMATION:

Date of Birth : April 29, 1974Place of Birth : Cabanatuan City, Nueva Ecija, PhilippinesCivil Status : MarriedCitizenship : FilipinoLanguages Spoken : Filipino and EnglishReligion : Roman CatholicHeight : 5’10”

I hereby certify that the above information are true and correct to the best of my knowledge and belief.

ENGR. MICHAEL E. CRUZApplicant