Embed Size (px)
Citation preview
Roll to Roll Label Transfer
.
Hot Tek HT-1R is Specially Designed Roll to Roll Label Transfer machineFor High production Application of Heat Seal Size, Care Labels and Logosto Stitched Garments and Panels. Latest Design is Very User friendly with Excellent Results
SPECIFACTIONS;• Roll width 2 Inches.• Heat Plate size 3 x 4 inches (Teflon Coated).• Pneumatically Up-Down (Adjustable)• Power 400 Watt Max.• Voltage 220-240 Volt-Single Phase.• Air Pressure 30-60 Psi.• Digital Temperature(Up to 300C) Time (99 Seconds)• Large Character LCD.• Alarm Indication on LCD
Label Transfer Machine Model HT-1D+
Label Transfer Machine HT-1DD+
Special Label Transfer Model with Cross Laser System .
• Plate Size : 4x 6 /6x6 /8 x8 inches
Hot Tek HT-1D+ and HT-1DD+ are both models are Specially Designed Automatic Double Action Label Transfer for Heat Seal Labels and Small Logos. It will give best results on both Stitch Garments and Panels.Its Distinguish qualities; One Machine Works like two Machines. Save Energy,Time and Labor Cost. Maximum Space for easy Placement of Label.
SPECIFACTIONS;
• Heat Plate Size 4 x6 inches (Teflon Coated) Optional Size (6 x6 inches,8 x 8 inches)• Plate Up-Down Pneumatically (Adjustable Pressure)• Power 400W-Max• Voltage 220-240 Volt-Single Phase• Air Pressure30-60Psi• Electronic Control Digital Temperature (up to 300C),Time 99 Seconds• Large Character LCD• Alarm indication on LCD• Auto and Manual Selection• Total Life and Piece Counter.
Latest Additional Features:-Machine Ideal Warring to Avoid Heat Loss and Energy Saving.-Resettable Counter.-Counter Data save even in Power Failure.-Transfer Time from 1 Second to 240 Second.*Cross Laser Marker System Optional
Automatic Cap PressHot Tek HT-1C+
Specifications:• High Production Twin Station Design.• Suitable for 4 x 8 inches.• Plate Up-down, Pneumatic (Adjustable
Pressure)• Power-400 Watt, Max• Voltage (input):220-240 Volt-single
Phase.• Heater Volateg:220-230Voltage
Heat Transfer Machine HT-6A+ (For T Shirt)
Heat Transfer for Pant Waist Belt Transfer
Heat Transfer Machine –For Gloves.
Specification: -Heat Transfer Machine (Double Action Automatic) Heat Plate Size 1X 20 (Teflon Coated) Pneumatically Up & Down( Adjustable Pressure) Power 2000 Watt. Voltage (Input) 220 Volt-Single Phase Air Pressure 30 -60 PSI. Digital Temperature Control Digital Temperature Control with PID (Up to 300 C)Time(99 Sec).Large Character LCDAlarm Indication on LCD.Auto & Manual Selection for Reset.Digital Piece and Life Counter.
Latest Additional Features:Machine Ideal Warring to Avoid Heat Loss and Energy Saving.Resettable Counter.Counter Data save even in Power Failure.Transfer Time from 1 Second to 240 Second.Accidental Press Safety.
Cross Laser Marker System Optional .
Transfer Press for jeans Belt Transfer
Special Heat Transfer Machine For Transfer Stickers on Jeans pant Waist Band.Technical Specifications:
Plate size : 4 x 12 inchesPower : 1 kwVoltage :220Air pressure : 65PS
Heat Transfer Machine –Hot Tek HT-8A+
Special Space saving Model in Big Heat Transfer Press.
• Plate size : 16 x 22 inches• Electrical Power : 3Kw• Air Pressure : 65 PSI• Voltage : 220 ,3 Phase
Fully Automatic Model
Fully Automatic Model:
Very improved and equipped with Latest technology with fully automatic option .The structure of model is very strong with strong air pressure to meet the requirements of apparel manufacturers for some articles need strong air pressure than regular model/heat presses.
Specifications : Plate size : 18 x 22 inches Or customize Air Pressure : more than 80 psiMachine Structure : Strong and Heavy than other modelDigital Control : PLC with Fully Automatic Option Ideal for special and normal transfers within minimum time
Shiny Effect Heat Press
Shiny Effect Heat Press Specification
Auto/Manual Rhine Stone Transfer-GAS&Electrical
Specially Designed Machine for Transfer of Rhine stones on open Fabric/Panels for Ladies suiting .The Machine with Built in Ups feature .
Specifications:
Plate size 36 x 48 inchesAir Pressure 65 PSIElectrical Power 7.5 kwGas Consumption 0.5/HourVoltage 440,3 Phase
Automatic Sublimation Transfer Machine
Specifications: • Heat Plate size 24 x 36 inches HT-9MH• Heat Plate Size 36 x 48 inches HT12MH• Heat Plate size 48 x 60 inches HT-48MH
• Heat Plate Teflon Coated.• Plate Up-Down: Automatic (Adjustable)• Power: 6 KW Max 440 Volts Three-Phase• Air Pressure 45-85 PSI• Digital Temperature Control (Upto 300 C)
Time(99 Sec).• Large Character LCD• Alarm Indication on LCD.• Auto & Manual Selection for Reset.• Digital Piece Counter• Total Life Counter.
Roller Type Sublimation Transfer Machine
Specification on request.
Semi Automatic Socks Press
SpecificationsHot Tek SP-6A is an Latest own Designed SEMI AUTOMATIC SOCKS PRESS for Socks Industry. This New Product of HOT TEK Brand is very productive and Maximum Result Oriented .The Machine Have Top and Bottom Heat Plates which gives Ideal Press Results of socks. Its Specially Designed Digital Control System provides individually control of Top and Bottom Heat Plates to get desire results. Design and Control System of the Machine is Very User-friendly . Technical Specifications; 1- Heavy Duty M.S. Pipe Strong Structure2- Press Plate Size 24 x36 inches3- Top and Bottom Heat Plate Teflon Coated4- Maximum Power 6Kw, 440V-50Hz
5- Dedicated PLC for Socks Press :
Digital Timer (< 250 Seconds) Dual Individual Temperature Control (< 200 Degree C)Reset able Piece CounterAdjustable Piece Count Per StrokeRejected Pieces can be Deducted from Counter
Automatic Socks Press Plant
Advance Model for Heavy Production Hot Tek SP-8A+ is our Advanced Model of Semi Automatic Socks Press Plant Series with Some more advanced and distinguish Features for heavy production . This New Product of HOT TEK Brand is very productive and Maximum Result Oriented .The Machine Have Top and Bottom Heat Plates which gives Ideal Press Results of socks. Its Specially Designed Digital Control System provides individually control of Top and Bottom Heat Plates to get desire results. Design and Control System of the Machine is Very User-friendly.
COMPARSION KEY POINTS (Hot Tek SP-8A+ Vs Traditionally Press):65% Electricity Saving .48%Labour Saving. 45-60%Extra Production
Technical Specifications; 1- Heavy Duty M.S. Pipe Strong Structure2- Press Plate Size 24 inches x 48 inches. (More Capacity for Pressing)3- Top and Bottom Heat Plate Teflon Coated4- Maximum Power 7.5Kw, 440V-50Hz5- Dedicated PLC for Socks Press :Auto Form Sensing (Very Special Feature)Digital Timer (< 250 Seconds) Dual Individual Temperature Control (< 200 Degree C)Reset able Piece CounterAdjustable Piece Count Per StrokeRejected Pieces can be Deducted from Counter
