Branddeur

FIRE DOORSET

DELTAVOLTATURIATURIA PREMIUMTURIA DOUBLE OPENING SENSEFONO-TURIASIGMAMETER DOORSACCESSORIES

OPENING DOORS TOTHE FUTURE

All rights reserved. Total or partial reproduction prohibited. The company reserves the right to make modifications without prior notice.

Our state-of-the-art production systems and our excellent work team gives us a competitive edge in an increasingly complex and demanding market. We are specialized in providing new ideas for our customers’ projects, incorporating an added value and a guarantee of quality in each new model.

Our quality management system for the design, production and sales processes of all our lines of steel doorset and hardware is certified by the AENOR in accordance with the UNE-EN-ISO 9001:2000 standards.

E-doors BV opens new doors to the future.

2

E-doors BV Mauritskade 55C 1092 AD Amsterdam 020-2611839 [email protected] www.e-doors.nl

OUR FIRE DOOSETLife for your Home

EI2 t C5

Some of the main concerns and obligations for architects and constructors are the planning and construction of safe, habitable buildings. Security begins with prevention and the selection of adequate structural materials and components, such as fire-doorsets, an essential protective element against the destructive force of fire. As a result, the use of fire-doorsets is mandatory in certain locations, in accordance with current regulations.

E-doors BV has more than 40 years experience in the development of ever-more advanced technological solutions. The range of fire-doorsets is the fruit of this effort and of our know-how in the manufacture of high-quality steel doors.

3

Delta 5Volta 7Turia 9Turia Double Leaf 11Turia Premium 13Turia Premium Double Leaf 14Turia Double Opening Sense 15Fono-Turia 17Sigma 19Meter Doors 23Accessoires 28

Index

4

· GALVANISED+Antifinger-print Protection

· Other RAL to select

· WHITEprelacquered 9010

SINGLE LEAF FIRE RATED DOORSET EI2 60 C5

DELTADelta model is our most economic fire-door featuring the most advanced technological innovations, and a structure similar to the rest of doorset in the same range. The door is characterized by its easy installation and maintenance.

Built and assembled without welding, the doorset is classified in the EI2 60 category, after having passed the tests carried out in an approved laboratory.

Available in standard dimensions only.

EI2 60 C5

5

SheetGalvanised steel +antifinger-print

What is the ANTIFINGER-PRINT PROTECTION?

The Antifinger-print finish is a clear prime as a supplement

over the galvanised.

Allow the doorset to be painted

directly, without the need of

a prime-washer.

3 advantages

Provide a greater

anti-corrosive protection.

Aspect is grey, transparent,

homogeneous and not oily.

Height-adjustement

Exploded view of the hinge

Coverplates

Lever Handles

4021.5

1.2

4868

101072

.5

10

Intumescent Seal

Rubber seal (Optional)CS5 Model

Steel anchor

DOOR OPENING

LEFT HAND RIGHT HAND

CS5 Frame Brick to Brick Internal frame size Door leaf size Overall size

Model Width Height Width Height Width Height Width Height

DE 800 x2050

8002050

7802040

7002000

8362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DE 900 x2050

9002050

8802040

8002000

9362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DE 1000 x2050

10002050

9802040

9002000

10362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DE 1100 x2050

11002050

10802040

10002000

11362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DE 1200 x2050

12002050

11802040

11002000

12362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

Measurements in millimetres.Contact us for made-to-measure orders.

Leaf Frame

Standard Measurements

Technical Characteristics - Delta Doorset

The HANDLE SYSTEM included in the standard range comprises two lever handles made of a highly-resistant material, coverplates and backplates, also made of the same material, with key-holes on both sides.

When installing the frame into a brick wall, always use cement-based mortars and do not use plaster or other derivatives. (Plaster attacks the zinc coating which protects the galvanised steel against corrosion).The CS5 frame can be screwed onto a specially designed galvanised steel SUB-FRAME, which is optional, and allows the easy installation of the door once the construction works are completed (see page 26 et 27).

Its STRUCTURE consists of two non-welded 0’7-mm-thick galvanised steel sheet with “antifinger-print” protection. The doorset is also available in pre-lacquered white steel finish.

The doorset is equipped with 2 HINGES own manufacturing of 3 mm thickness screwed onto the leaf and assembled to the frame. Certified CE Mark according to EN-1935.A central steel anti-crow bar bolt for improved security is incorporated into the frame.

The LOCKING SYSTEM includes a mortice lock of one-point locking system with CE Mark according to EN-12209:2007. The system also comprises a 35x35 brass cylinder with keys.

The profile of this doorset is mounted onto a frame called CS5 made of 1’2 mm-thick galvanised steel.

An intumescent seal or rubber seal can also be installed even if the door is not equipped with a seal.3 galvanised steel anchors on each side, allowing the frame to be installed in brickwork, or screwed onto a sub-frame.

6


· StainlessSteel



REVERSIBLE

SINGLE LEAF FIRE RATED DOORSET EI2 30-60-90 C5

VOLTAThe Volta doorset is our most practical fire rated steel doorset essentially characterized by its REVERSIBILITY.

This high-quality designed doorset is easily ADAPTABLE, as it can be installed to open either towards the right or the left.

The doorset is built and assembled without welding. It is classified as EI2 30-60-90, in accordance with the tests carried out in an approved laboratory.

EI2 30 C5EI2 60 C5EI2 90 C5

7



VO 800 x 2050 800 2050 780 2031 700 2000 836 2031

VO 900 x 2050 900 2050 880 2031 800 2000 936 2031

VO 1000 x 2050 1000 2050 980 2031 900 2000 1036 2031

VO 1100 x 2050 1100 2050 1080 2031 1000 2000 1136 2031

VO 1200 x 2050 1200 2050 1180 2031 1100 2000 1236 2031

DOOR OPENING (reversible)

LEFT HAND RIGHT HAND

REVERSIBLE

CROSS-SECTION A-A’OVERALL SIZE

INTE

RNAL

FRA

ME S

IZE

= BR

ICK

TO B

RICK

- 19

DOOR

SIZ

E =

BRIC

K TO

BRI

CK -

50

BRIC

K TO

BRI

CK =

H

OVER

ALL S

IZE

A

B B’

A’

CROSS-SECTION B-B’INTERNAL FRAME SIZE = BRICK TO BRICK + 36

DOOR LEAF SIZE = BRICK TO BRICK - 100OVERALL SIZE = BRICK TO BRICK - 20

BRICK TO BRICK = A

Cross-Section of frame (Upper and Lower)10

3120

70.1

1.5 11

CS5 Model

Rubber seal(Optional)

40

Rubber seal (Optional)

1.5

4868

72.5

10

10

Intumescent Seal

21.5

10

Intumescent Seal



Frame

Leaf

The STRUCTURE consists of two non-welded 0’8 mm thick galvanised steel sheets. The doorset is also available in pre-lacquered White finish.

Its INTERIOR is filled with a combination of fire-resistant materials. The door is 63 mm thick, with a 16 mm wide and 2mm thickness edge.

The door is equipped with 3 height-adjustable HINGES screwed onto the leaf and an automatic locking system.

The LOCKING SYSTEM comprises a mortice lock with a one-point locking. The system also comprises a 35 x 35 brass cylinder with keys.

The HANDLE SYSTEM included in the standard range comprises two handles made of a highly-resistant material, cover-plates and casing, also made of the same material, with key-holes on both sides.

Technical Characteristics - Volta Doorset

The doorset is mounted onto a CS5 FRAME made of 1’5 mm thickness galvanized steel. The cross-section of the frame differs according to the width for reversibility purposes.

4 galvanized steel anchors on each side, allowing the frame to be installed in brickwork, or screwed onto a sub-frame.

The doorset comprises an expanding graphite joint. The fitting of a rubber seal is optional.

8


· StainlessSteel



FIRE RATED DOORSET 1 & 2 LEAVES EI2 30-60-90-120 C5

TURIAThe Turia fire-doorset is available in four models: single-leaf, double-leaf, double-leaf asymmetric and meter doors.

Characterized by their great versatility, both the frame and the leaf of this range of door are manufactured in different finishes, in accordance with the requirements of specific projects, and incorporate various accessories, many designed exclusively. These doorset fulfill the double function of security and design, and provide effectiveness and adaptability to any architectural setting.

EI2 30 C5EI2 60 C5EI2 90 C5EI2 120 C5

9


OVER

ALL S

IZE

= BR

ICK

TO B

RICK

SIZ

E+18

DOOR

LEAF

SIZ

E =

BRIC

K TO

BRI

CK S

IZE

- 50

INTE

RNAL

FRA

ME S

IZE

= BR

ICK

TO B

RICK

SIZ

E - 1

0

OVER

ALL S

IZE

A

B B’

A’

CROSS-SECTION B-B’OVERALL SIZE = BRICK TO BRICK SIZE + 36

DOOR LEAF SIZE = BRICK TO BRICK SIZE - 100

INTERNAL FRAME SIZE = BRICK TO BRICK SIZE - 20BRICK TO BRICK SIZE

CS5 Model40

Rubber seal (Optional)

1.5

4868

72.5

10

10Intumescent Seal

21.5

10

BRIC

K TO

BRI

CK S

IZE

63Turia Doorset EI2 30-60-90

OVERALL SIZE = BRICK TO BRICK SIZE+ 36


INTERNAL FRAME SIZE = BRICK TO BRICK SIZE - 20

BRICK TO BRICK SIZE

74Turia Doorset EI2 120




TU 800 x2050

8002050

7802040

7002000

8362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

TU 900 x2050

9002050

8802040

8002000

9362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

TU 1000 x2050

10002050

9802040

9002000

10362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

TU 1100 x2050

11002050

10802040

10002000

11362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

TU 1200 x2050

12002050

11802040

11002000

12362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

3 points lock

Leaf

Technical Characteristics - Turia Doorset

Standard Measurements Frame

The STRUCTURE of the Turia EI2 30-60-90 consists of two non-welded 0’8 mm thickness galvanised steel sheets. The doorset is 63 mm thick, with a 16 mm wide and 2 mm thickness edge.

The EI2 120 Turia doorset is built with 3 galvanised steel sheets, with a “reinforcement” plate on the pan side of the door. Its leaf is 74 mm thick.

The doorset is also available in White finish or Stainless steel finish, and other RAL upon request.

Its INTERIOR is filled with a combination of fire-resistant materials.

The doorset is equipped with 3 steel galvanised HINGES own manufacturing of 3mm thick, screwed onto the leaf and assembled onto the frame. Certified in accordance with EN-1935 and CE Mark.

The LOCKING SYSTEM comprises a mortice lock with one and 3 points (in 1 leaf). Certified CE Mark according to EN 12209:2004. The system also includes a 35x35 or 35x50 (for EI2 120 door) brass cylinder with the keys.

The HANDLE SYSTEM included in the standard range comprises two lever handles made of a highly-resistant material, cover-plates and back plates with key holes on both sides.

The doorset is mounted onto a CS5 FRAME made of 1’5 mm thickness galvanised steel.

4 galvanised steel anchors on each side, allowing the frame to be installed in brickwork, or screwed onto a sub-frame.

The doorset is also equipped with an intumescent seal. The fitting of a rubber seal is optional.

A specially designed SUB-FRAME onto which the CS5 frame can be screwed is also available. This sub-frame allows the easy installation of the door once the construction works are completed (see page 15).

10

CROSS-SECTION A-A’

OVER

ALL S

IZE

= BR

ICK

TO B

RICK

SIZ

E+18

DOOR

LEAF

SIZ

E =

BRIC

K TO

BRI

CK S

IZE

- 50

INTE

RNAL

FRA

ME S

IZE

= BR

ICK

TO B

RICK

SIZ

E - 1

0

CROSS-SECTION B-B’

BRIC

K TO

BRI

CK S

IZE

OVERALL SIZE

OVER

ALL S

IZE

A

B B’

A’


63

ACTIVE LEAF SIZE

DOOR LEAF SIZE = BRICK TO BRICK SIZE -100

INTERNAL FRAME SIZE = BRICK TO BRICK SIZE -20

BRICK TO BRICK SIZE = A

74


ACTIVE LEAF SIZE

DOOR LEAF SIZE = BRICK TO BRICK SIZE -100

INTERNAL FRAME SIZE = BRICK TO BRICK SIZE -20

BRICK TO BRICK SIZE = A

Measurements in millimetres. Contact us for made-to-measure orders.

Turia Doorset EI2 30-60-90

Turia Doorset EI2 120



DH TU 1200 x2050

12002050

11802040

11002000

12362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1300 x2050

13002050

12802040

12002000

13362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1400 x2050

14002050

13802040

13002000

14362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1500 x2050

15002050

14802040

14002000

15362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1600 x2050

16002050

15802040

15002000

16362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1700 x2050

17002050

16802040

16002000

17362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1800 x2050

18002050

17802040

17002000

18362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 1900 x2050

19002050

18802040

18002000

19362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 2000 x2050

20002050

19802040

19002000

20362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 2100 x2050

21002050

20802040

20002000

21362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

DH TU 2200 x2050

22002050

21802040

21002000

22362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

Retainer

Rod

Automatic cremone lock with CE Mark

Rod

Electric slike

Electric strike connecting tube.

The Double Leaf Turia EI2 120 C5, is similar to the Turia single leaf EI2 120 C5: it’s built with 3 galvanised steel sheets, with a “reinforcement” plate on the pan side. Its leaf is 74 mm thick.This double leaf doorset is also available in white prelaquared finish and stainless steel and for any other finish upon request.The ACTIVE LEAF has the same characteristics as the TURIA model.The interior of the INACTIVE LEAF is the same than its active counterpart, except that it incorporates an automatic cremone lock (instead of the traditional bolt lock system installed on the edge).


Technical Characteristics - Turia Double Leaf Doorset

When the handle of the inactive leaf is activated, the locking mechanism of the door is released, opening the door.

This mechanism allows the installation of panic bars without having to install external fasteners, improving appearance and efficiency.The electric stike is certidied for this model in 1 and 2 leaves for 30, 60 and 90 minutes.

This mechanism comprises the following parts: - Retainer in the upper part of the

inactive leaf.- Rods fitted into the interior of the

inactive leaf.- An automatic closing system for

the cremone lock.- 9 mm mortice lock.

11

CROSS-SECTION A-A’ OVERALL SIZE

BRIC

K TO

BRI

CK S

IZE

A

A’

OVER

ALL S

IZE

OVER

ALL S

IZE

DOOR

LEAF

SIZ

E

Upper fix panel TURIA EI2’60


OVER

ALL S

IZE

(OVE

RALL

DOO

R +

OVER

ALL F

IXED

PAN

EL)

OVER

ALL F

IXED

PAN

EL

OVERALL SIZE

OVERALL DOORSETOVERALL

FIXED PANELA

A’

A A’

OVER

ALL S

IZE

(OVE

RALL

DOO

R +

OVER

ALL F

IXED

PAN

EL)

OVER

ALL S

IZE

= BR

ICK

TO B

RICK

SIZ

E +

18

OVER

ALL F

IXED

DOO

R

Technical Characteristics – TURIA asymmetric double leaf doorsetThe Asymmetric Double Leaf Doorset characteristics are exactly the same as a Turia Double Leaf Doorset, except for the width of the active leaf, which differs from that of the inactive leaf. This mechanism also allows for the installation of panic bars. The asymmetry of the Turia double leaf differs according the requirements of each project.

Upper and lateral fix panel without intermediate frame

TURIA fix panelsFix panels are a solution specially developed by Andreu to cover any space on a site with our standard doorset.The structure is based in Turia doorset and depending on the space, fix panels can be installed above or on the side of the doorset. Moreover, we can produce with or without intermediate frame between the fix panel and the door leaf. In both cases we have them certified EI2 60, according to the standard UNE-EN 1634:2002.

Fix panel and door leaf are build with the same frame. In this case, door leaf is in direct contact with the fix panel. This structure is an esthetical and light solution, which is normally used for upper fix panels.

Upper fix panel with intermediate frameIn this case the fix panel is independent from the doorset, where each one has is own frame. This solution is better for bigger dimensions and it’s the best solution for fix panels with glass.

12

· StainlessSteel


· GREY RAL 7043

FIRE RATED DOORSET 1 & 2 LEAVES EI2 60 C5

TURIA PREMIUME-doors five-stars Fire-Doorset. Turia Premium door has been developed in order to supply the market with a high level Fire-Doorset thanks to its high mechanical resistance, its wide sturdiness and the variety of finishings and accessories.Turia Premium doorset has 5 stainless steel hinges, a reinforcement plate of 10 mm thickness and a sub-frame as standard.

Turia Premium doorset can be installed with the supplied sub-frame, specially designed by Andreu, in a brick wall or plasterboard wall, without loosing the certificate EI2 60 C5.

EI2 60 C5

13



TUP 800 x 2150 800 2150 780 2140 700 2100 836 2168

TUP 900 x 2150 900 2150 880 2140 800 2100 936 2168

TUP 1000 x 2150 1000 2150 980 2140 900 2100 1036 2168

TUP 1100 x 2150 1100 2150 1080 2140 1000 2100 1136 2168

TUP 1200 X 2150 1200 2150 1180 2140 1100 2100 1236 2168


OVER

ALL S

IZE

A


Intumescent Seal

Rubber seal

4021.5

1.2

4868

101072

.5

10

CS5 Model

DOOR

LEAF

SIZ

E IN

TERN

AL F

RAME

SIZ

EBR

ICK

TO B

RICK

SIZ

E

OVER

ALL S

IZE

A’

B B’

BRICK TO BRICK SIZEINTERNAL FRAME SIZE

DOOR LEAF SIZE

OVERALL SIZE


OVERALL SIZE

OVER

ALL S

IZE

A

A’

B B’

OVERALL SIZE = BRICK TO BRICK SIZE+36

ACTIVE LEAF SIZEDOOR LEAF SIZE = BRICK TO BRICK SIZE - 100

INTERNAL FRAME SIZE = BRICK TO BRICK SIZE - 20BRICK TO BRICK SIZE = A


Model Width Height Width Height Width Height Width Height2L TUP 1200 x 2150 1200 2150 1180 2140 1100 2100 1236 21682L TUP 1300 x 2150 1300 2150 1380 2140 1300 2100 1336 21682L TUP 1400 x 2150 1400 2150 1480 2140 1400 2100 1436 21682L TUP 1500 x 2150 1500 2150 1580 2140 1500 2100 1536 21682L TUP 1600 x 2150 1600 2150 1680 2140 1600 2100 1636 21682L TUP 1700 x 2150 1700 2150 1780 2140 1700 2100 1736 21682L TUP 1800 x 2150 1800 2150 1880 2140 1800 2100 1836 21682L TUP 1900 x 2150 1900 2150 1980 2140 1900 2100 1936 21682L TUP 2000 x 2150 2000 2150 2080 2140 2000 2100 2036 21682L TUP 2100 x 2150 2100 2150 2180 2140 2100 2100 2136 21682L TUP 2200 x 2150 2200 2150 2280 2140 2200 2100 2236 2168

Retainer

Rod


Rod

Measurements in millimetresContact us for made-to-measure orders.

Measurements in millimetresContact us for made-to-measure orders.

Single leaf

Turia Premium EI2 60 C5 STRUCTURE is based in 3 non-welded and prelacquered antifinger steel plates of 1 mm thickness. The doorset is 75 mm thick and has a lid in his structure; and has an edge of 16 mm wide and 2 mm thick.Its INTERIOR is filled with a combination of fire-resistant materials.The door has 5 stainless steel HINGES of 3 mm thickness. They are made accordingly to our own design and to the norm UNE-EN 1935. Moreover they are CE marked. They are screwed to the leaf and assembled to the frame.The LOCKING SYSTEM comprises a stainless steel mortice lock with one point locking system. It’s also CE marked accordingly to norm UNE-EN 12209:2004. The system also comprises a 35x35 nickel cylinder with keys.The HANDLE SYSTEM included in the standard range comprises a TESA brand stainless steel square cover plate with handle and keyhole, model SENA.The door is mounted onto a CS5 frame made of 1,5 mm thickness galvanized steel.4 galvanised steel anchors on each side, allowing the frame to be installed in brickwork or screwed onto a sub-frame.The doorset comprises a graphite intumescent seal and a rubber seal.A SUB-FRAME is also comprised, certified and specially designed to screw our CS5 frame. To allow an easy installation once the work is finished. (Look sub-frame chapter).

Technical Characteristics - Turia PREMIUM

Doble leafTuria Premium double leave EI2 60’s STRUCTURE is based in 3 non-welded and prelacquered antifinger steel plates of 1 mm thickness. The doorset is 75 mm thick and has a lid in his structure; and has an edge of 16 mm wide and 2 mm thick.The ACTIVE LEAF has the same characteristics than Turia model, excepts its thickness leaf and steel sheat.The INACTIVE LEAF structure is similar to the active leaf, excepts for the automatic cremone lock (instead of the flush bolt). This mechanism has:- Retainer in the top of the inactive leaf.- Rods inside the inactive leaf.- Automatic cremone lock.- 9 mm mortice lock.When the inactive leaf’s handle is moved, the automatic cremone lock is released and the door is opened.The mechanism allows the installation of panic bars without incorporating external rods: which is an improvement of the door’s aesthetics and efficiency.

14


· StainlessSteel



DOUBLE LEAVES FIRE RATED DOORSET EI2 60 C5

TURIA DOUBLE OPENING SENSE

Turia Double Opening Sense’s STRUCTURE is made with 2 galvanized steel sheets of 0,8 mm thickness, assembled without welding and with the antifinger protection plus the epoxy painting. It’s thickness is 63 mm, with a 16 mm width and 2 mm thickness rebate.

Its INSIDE is made with different fire-proof and thermical isolation materials.

With 3 HINGES in 3 mm thickness steel, made with our own design, CE marked according to UNE-EN1935:2002 standard. The hinges are screwed to the leaf and assembled to the frame

The frame used in this doorset model is the C7 DS, made with 1 width and 2 jambs from the same model, where are screwed 2 rods of CS5 frame through nuts.

This frame has to be filled with concrete during the installation. That’s why the jambs of this frame has been prepared to facilitate the filling.

An intumescent seal in graphite is incorporated in the jambs and the width of the frame.

C7 DS frame has a lower bar to facilitate the installation of the door, indicating the floor level.

EI2 60 C5

15

C7DS Frame Brick to Brick Door leaf size Overall size

Model Width Height Width Height Width Height

2L TU 1800 GADS 1800 2091 1600 2000 1800 2091

2L TU 1900 GADS 1900 2091 1700 2000 1900 2091

2L TU 2000 GADS 2000 2091 1800 2000 2000 2091

2L TU 2100 GADS 2100 2091 1900 2000 2100 2091

2L TU 2200 GADS 2200 2091 2000 2000 2200 2091

2L TU 2300 GADS 2300 2091 2100 2000 2300 2091



OPPENING


Intumescent sealing

100

90

Intumescent Seal

60 40

483280

70

CS5 Frame

Double Sense Openning

frame

OVERALL SIZEOV

ERAL

L SIZ

E

B

DOOR

LEAF

SIZ

E

B’

A

A’

OVERALL SIZE

DOOR LEAF SIZE

DOOR 1 LEAF SIZE

C7DS Model

Technical Characteristics -Turia Double Opening Sense Double Opening Sense doorset is similar to a Turia Double Leaf doorset, exception of its Double Opening Sense. This means, that each one of the leaves are opening in a different sense. That’s why this doorset is mostly used in hospitals.


16


· StainlessSteel



FIRE RATED AND ACOUSTIC DOORSET–SINGLE LEAF EI2 60-90 C5

FONO-TURIAFono-Turia doorset model combines the characteristics of a Fire Doorset with the acoustic insulation.

The Fono-Turia is fire rated doorset, single leaf, with steel frame, assembled without welding and designed to resist against the fire and to protect against the noise.

This doorset is tested and certified in accordance with EN-1634-1: 2000, EN ISO 140-3:1995, EN 1191:2000.

EI2 60EI2 90

Resistencia al Fuego

Durabilidad Autocierre

Aislamiento Acústico

C533 dB34 dB35 dB

17

4021.5

1.2

4868

101072

.5

10

Intumescent Seal

Rubber seal(Optional)CS5 Model

SheetGalvanised steel

+antifinger-print protection

What is the ANTIFINGER-PRINT PROTECTION?The Antifinger finish is a

clear prime as a supplement over the galvanised.

Allow the doorset to be painted

directly, without the need of

a primar.

3 advantages

Provide a greater

anti-corrosive protection.

Aspect is grey, transparent,

homogeneous and not oily.

Steel anchor

Lock Exploded view of the hinge

Coverplates

Lever Handles

Automatic threshold CS5 Frame Brick to Brick Internal frame size Door leaf size Overall size

Model Ancho Alto Ancho Alto Ancho Alto Ancho Alto

FT 800 x 2050 800 2050 780 2068 700 2000 836 2068

FT 900 x 2050 900 2050 880 2068 800 2000 936 2068

FT 1000 x 2050 1000 2050 1080 2068 900 2000 1036 2068

FT 1100 x 2050 1100 2050 1180 2068 1000 2000 1136 2068

Measurements in millimetres.

Leaf FrameIts STRUCTURE consists of two non-welded 0’8 mm thick galvanised steel sheets. Its interior is filled with a combination of insulated materials such as rockwool and plasterboard. The doorset is 63 mm thick, is eqquiped with an automatic threshold.

The door is mounted onto a CS5 FRAME made of 1’5 mm thick galvanised steel. There are galvanised steel anchors on each side, allowing the frame to be installed in brickwork, or screwed onto a sub-frame.

Fono-Turia range

Technical Characteristics - FONO-TURIA Doorset

The frame is also equipped with an intumescent graphite joint 20x3 mm and a rubber seal onto the frame perimeter to provide the acoustic insulation required.


EI2 60 35 dB, without vision panelEI2 60 33 dB, maximum vision panel 400x500RF 60 35 dB, maximum vision panel with double glass 200x200

EI2 90 35 dB, without vision panelEI2 90 34 dB, maximum vision panel 400x500RF 90 35 dB, maximum vision panel with double glass 200x200

The doorset is equipped with 3 HINGES own manufacturing of 3 mm thick screwed onto the leaf and assembled to the frame. Certified CE Mark according to EN-1935.

The LOCKING SYSTEM includes a mortice lock of one-point locking system with CE Mark according to EN-12209:2007. The system also comprises a 35x35 brass cylinder with keys.

The HANDLE SYSTEM included in the standard range comprises two lever handles made of a highly-resistant material, coverplates and backplates, also made of the same material, with key-holes on both sides.

To provide an ACOUSTIC INSULATION, rubber seals are incorporated onto the leaf: one of black rubber 15x3 mm and another one of vinyl which is activated automatically when the door closes.

18

2 mm

ABRASION RESISTANT

SCRATCH RESISTANT

IMPACT RESISTANT

FIRE RATED DOORSET 1 & 2 LEAVES

SIGMASigma doorset model combines the characteristics of the Fire Doorset with the aesthetics and resistance of a Formica Laminate door.

In close collaboration with Formica we have produced a 2 mm High Pressure Formica Laminate, ideal for this type of vertical application.

There is no other doorset in the market that has a Laminate of this thickness as practically all doors that use a Formica covering have a standard thickness of 0.7 mm.

Not only does the aesthetics of this Formica covering differ to that of the traditional Fire Door but it also provides strong resistance against scratching, abrasion and impact, without the need of later maintenance.

EI2 30 C5 EI2 90 C5*EI2 60 C5 EI2 120 C5*

*Only 1 leaf19

Office Segment

School Segment

Hotel Segment

Hospital Segment

RAL 9003

F 2255

RAL 1019

K 1181

RAL 1019

F 3050

RAL 7037

F 1484

RAL 7011

K 2020

RAL 8028

K 1834

RAL 1007

K3209

RAL 1037

K 3210

RAL 3003

F 7845

RAL 3004

F 6902

RAL 3005

K 2046

RAL 4005

F 0233

RAL 4006

F5346

RAL 6033

K 1326

RAL 6002

F 6901

RAL 6011

F 7853

RAL 8025

F 1062

RAL8019

F 6926

RAL 8022

F 9012

RAL 8017

F 6932

RAL 5019

F7884

RAL 5013

F 2828

RAL 5017

F 7914

RAL 6027

F 7846

RAL 6005

K 1336

RAL 8028

F 5372

RAL7012

K 3737

RAL 7015

K 3735

RAL 7015

K 5583

RAL 7016

K 3734

RAL 8007

F 2726

RAL 8007

K 7604

RAL 8025

F 3699

RAL 8011

F 3574

RAL 7016

F 5477

Monotony no more !Apart from the standard reference range that we provide, there is a choice of other plain colours, woodgrains and patterns within the rest of the Formica range.

Besides the catalogue range there is also the option of creating a personalised design using the DigiForm digital printing. The design and technical characteristics of the Laminate would be maintained.

Customised model

Sigma consists of four models designed for the Hospital, Hotel, School, Bank and Office segments.

In collaboration with Tesa, we have configured special hardware for the Sigma door of Stainless Steel quality. Each doorset model has a different configuration with regards to the lever handle and other accessories such as stainless steel kickplates to safeguard hospital beds and trolleys, stainless steel frames and profiles, hinges, etc….

20

Hospital & Clinics Offices

Hotels Teaching Insttitutions

Designed for the hospital sector. The frame and door perimeter profile is in stainless steel or oven-painted according to the client´s choice.- Double stainless steel kickplate on the door pan.- Stainless steel hinges.- Stainless steel lever handles with protection plate.

Fire Doorset: Monotony no more

Designed for the hotel segment. Covered normally with a woodgrain Laminate, this door has no maintenance cost but has the same appearance as a wooden door.- Certified with hotel locking system.

Ideal for offices where security is not the only important factor but aesthetics as well.

Designed for the educational sector: universities, institutes, nurseries… The frame and perimeter profile is stainless steel or oven-painted according to the client´s choice.- Stainless steel lever handle with key-hole and protection

plate.21

CROSS-SECTION A-A’ OVERALL SIZE

OVER

ALL S

IZE

A


DOOR

LEAF

SIZ

E

INTE

RNAL

FRA

ME S

IZE

ORDE

R SI

ZE

OVER

ALL S

IZE

A’

B B’

OVERALL SIZE

DOOR LEAF SIZEINTERNAL FRAME SIZE

ORDER SIZE


OVERALL SIZE

OVER

ALL S

IZE B B’

OVERALL SIZE

DOOR LEAF SIZEINTERNAL FRAME SIZE

ORDER SIZE

Retainer

Rod


Rod


Intumescent Seal

Rubber seal(optionall)

4021.5

1.2

4868

101072

.5

10

CS5 Model




SI 800 x2050

8002050

7802040

7002000

8362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

SI 900 x2050

9002050

8802040

8002000

9362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

SI 1000 x2050

10002050

9802040

9002000

10362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

SI 1100 x2050

11002050

10802040

10002000

11362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

SI 1200 x2050

12002050

11802040

11002000

12362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

CS65 Frame Brick to Brick Internal frame size Door leaf size Overall sizeModel Width Height Width Height Width Height Width Height

2LSI 1200 x2050

12002050

11802040

11002000

12362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1300 x2050

13002050

12802040

12002000

13362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1400 x2050

14002050

13802040

13002000

14362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1500 x2050

15002050

14802040

14002000

15362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1600 x2050

16002050

15802040

15002000

16362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1700 x2050

17002050

16802040

16002000

17362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1800 x2050

18002050

17802040

17002000

18362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 1900 x2050

19002050

18802040

18002000

19362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 2000 x2050

20002050

19802040

19002000

20362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 2100 x2050

21002050

20802040

20002000

21362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

2LSI 2200 x2050

22002050

21802040

21002000

22362068

2100 2100 2090 2050 21182150 2150 2140 2100 2168

Single leaf

Its Structure consists of two non-welded 0’8 mm thick galvanised steel sheet covered with 2 High Pressure Formica Laminate of 2 mm thick.This hight quality Formica Laminate is constructed from layers of paper impregnated with termoselting synthetic resins and fixed to the steel sheets with contact glue and with steel profile against the leaf perimeter edge, oven-painted or in galvanised steel, 0’8 mm thick.Its interior is filled with a combination of fire-resistant materials (rockwool and plasterboard) and steel reinforcements. The door is 69 mm thickness.The doorset is equipped with 3 or 4 height-adjustable reversible steel galvanised hinges of 3 mm thick, produced in-house.The doorset comprises a mortice lock with one point locking system and also a steel cylinder with keys.The handle system included in the standard range comprises stainless steel lever handle and cover-plates.The Sigma doorset also includes plastic corner brackets to ensure the rigidity of the leaf and frame and maintain the correct door position during the installation. These must be removed after installation.

Technical characteristics - Sigma Doorset

Double leafThe door is mounted onto a CS5 frame made of 1’5 mm thick galvanised steel and oven-painted. The frame can also be made of 1’5 mm thickness stainless steel called CS65 frame model.The frame includes a rubber seal to ensure smooth door closure and to avoid gaps, an expanding joint not required.The frame has 2 mm thick galvanised steel anchors for installation to brickwork or to sub-frame.A steel sub-frame is recommended for the Sigma door in order to prevent incidents during works such as paint, plaster, cement,….

22

TURIA

BASIC

LEX· GALVANISED

+Antifinger-print Protection

· StainlessSteel


REVERSIBLE


· StainlessSteel




TURIA, BASIC & LEX METER DOORS

Fire Rated Meter DoorsE-doors offers you the TURIA fire rated meter doors, with the same technical characteristics than TURIA doorset, with fire rating certification up to 120 minutes.

EI2 30 EI2 90EI2 60 EI2 120

BASIC and LEX fire rated meter doors, with 60 minutes fire rating certification, have a special characteristic: they are reversible.

EI2 60

23


OVERALL SIZE

OVER

ALL S

IZE

A


A’

B B’

BRIC

K TO

BRI

CK S

IZE

INTE

RNAL

FRA

ME S

IZE

= BR

ICK

TO B

RICK

SIZ

E - 2

0

DOOR

LEAF

SIZ

E =

BRIC

K TO

BRI

CK S

IZE

- 100

OVER

ALL S

IZE

= BR

ICK

TO B

RICK

SIZ

E +

36

OVERALL SIZE = BRICK TO BRICK SIZE+36


INTERNAL FRAME SIZE = BRICK TO BRICK SIZE - 20

BRICK TO BRICK SIZE

H E I G H T

300 400 500 600 700 710 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100

WID

TH

330 - - - L L L L L L L L L L L L L - - - -

400 B B B L L L L L L L L L L L L L - - - -

500 B B B L L L L L L L L L L L L L - - - -

600 B B B B B L B B B B L L L L L L L L L L700 B B B B B L B B B B L L L L L L L L L L710 B B B B B B T B T B T B T B T L T L T L T L T L T L T T T T T800 B B B B B B T B T B T B T B T L T L T L T L T L T L T T T T T900 B B B B B B T B T B T B T B T L T L T L T L T L T L T T T T T

1000 B B B B B B T B T B T B T B T L T L T L T L T L T L T T T T T

Cover by Turia certificationT Cover by Lex certificationL Cover by Basic certificationB*For more information look the price list.

IK 10Index

Prot

ec

tion level degree IP 2.0Index

Prot

ec

tion level degreeFire Rated Meter Doors

The TURIA METER DOOR has the same technical characteristics as the other TURIA doorset, except for the following: - It comprises a CS5 frame closed on all four

sides. - The number of hinges depends of the size of the door,

with a minimum of 2 hinges.- The four sides of the leaf are surrounded by an edge to

ensure a tight fit in the closed frame.The Turia Meter Doors can be manufactured in single or double leaf.

The standard handle system of the meter door comprises a coverplate with key hole on both sides and cylinder with thumb turn on lid side. However, any type of opening system can be fitted upon request.

Cyliner with thumb turn

EI2 30 EI2 90EI2 60 EI2 120

Standard MeasurementsThe following table refers all the allowed sizes of the certificacion in accordance with UNE 1634-1:2001, for each Fire Meter Door.

24


OVERALL SIZE

OVER

ALL S

IZE

A


A’

B B’

INTE

RNAL

FRA

ME S

IZE

/ BRI

CK T

O BR

ICK


OVER

ALL S

IZE

A

CROSS-SECTION B-B’A’

B B’

BRIC

K TO

BRI

CK S

IZE

Key

Basic Hinge

Lock

604010 10

23.6 36.4

1

2019

.23

4055

.615

.6

OVER

ALL S

IZE

DOOR

LEAF

SIZ

E

OVERALL SIZE

DOOR LEAF SIZE

INTERNAL FRAME SIZE / BRICK TO BRICK

INTE

RNAL

FRA

ME S

IZE

DOOR

LEAF

SIZ

E

OVER

ALL S

IZE

OVERALL SIZE

DOOR LEAF SIZE INTERNAL FRAME SIZE

BRICK TO BRICK SIZE

Lex/Turia Hinge

40

72.5

21.5

1.5

4868

10

10

10

IK 10Index

Prot

ec

tion level degree

IP 2.0Index

Prot

ec

tion level degree

REVERSIBLE CS4 Model

CS5 Model

REVERSIBLE

Basic Meter Doors

Its STRUCTURE comprises two non-welded 0’5 mm thickness galvanised steel sheets. Its interior is filled with a combination of fire-resistant materials such as rockwool and plasterboard. The door is 38 mm thick.The door is equipped with 2 opposite galvanised steel HINGES own manufacturing of 2,5 mm thickness. These hinges are screwed onto the leaf and assembled to the frame.This meter door includes steel cam with triangular spindle. Not lever handle included.The FRAME is our corner frame CS4, assembled without welding. It is made of 1 mm galvanised steel sheet, with steel galvanised anchors allowing the frame to be installed in brickwork. The fitting of a rubber seal is optional.

Lex Meter Doors

Its STRUCTURE comprises two non-welded 0’7 mm thick galvanised steel sheets. Its interior is filled with a combination of fire-resistant materials such as rockwool and plasterboard. The door is 62 mm thick.The door is equipped with 2 opposite galvanised steel HINGES own manufacturing of 2,5 mm thickness. These hinges are screwed onto the leaf and assembled onto the frame. Certified CE Mark in accordance with EN 1935.This meter door is equipped with steel cam with triangular spindle. Not lever handle included.The FRAME is our corner frame CS5, assembled without welding. It is made of 1,2 mm galvanised steel sheet, with steel galvanised anchors allowing the frame to be installed in brickwork. The fitting of a rubber seal and intumescent joint are optional.

25

INTERNAL FRAME SIZE

ORDER SIZE (OR BRICK TO BRICK SIZE)

1 cm 1 cm

Leaf

Steelanchor

Frame

INTERNAL FRAME SIZE

Hinge

Supplement

CS5 Frame

Hinge

LeafFor 8

0 to 1

90 m

m

Supplement

CS5 Frame

Leaf

Hinge

For 1

90 to

300 m

m

CS5 Frame Assembly with Wide FrameThe Wide Frame is a supplement which wraps the wall for 80 to 500 mm thick. Contact us for other measurements.

INTERNAL FRAME SIZE

OVERALL SIZE (EXTERNAL FRAME SIZE)

OVERALL SIZE (EXTERNAL FRAME SIZE) / BRICK TO BRICK

Tubular frame: screwing installation between wallsAnchored Installation between wallsWall opening = Overall size or External frame size Wall opening = Overall size or External frame size

TUBULAR Frame

DOOR LIFE SIZE / BRICK TO BRICK - 13668 68

Leaf

CS5 Frame installationAccording to the installation and place, the sizes of the doorset can be changed. The wall opening (brick to brick size) will be always our reference size.

Anchored Installation corner wall Screwing installation corner wallWall opening = Order size of the doorset. Wall opening = Internal Frame Size

26

Rockwool

Plasterboard CS5 Frame

Sub-frameSub-frame

Leaf

PlasterboardCS5 Frame

Rockwool

Plaster the wall

Plaster the wall

Plaster the wall

CS5 FrameSub-frame CS5 Frame Sub-frame

Leaf

Plaster the wall

Plaster the wall

Sub-frameCS5 Frame

CS5 Frame Sub-frame

Leaf

To fill with mortar

To fill with mortar

Installation of the doorset to a sub-frameE-doors has developed a sub-frame which helps for the installation of our fire rated doorsets, in plasterboard or brick walls, certified EI2’60. This sub-frame has been developed and patented.

Installation in plasterboard wall with wrapping frameThe wrapping sub-frame allows the installation of E-doors fire rated doorsets into a plasterboard wall, maintaining its EI2’60 certification. It has several u-shaped lengtheners, u-shaped beams and u-shaped top legs; that allows to build the plasterboard wall once the sub-frame is installed.

Installation in brickwall with wrapping frameThis wrapping sub-frame allows the later installation of a fire rated doorset in a brick wall, maintaining its EI2’60 certification. The sub-frame is partially visible and the doorset can be screwed to the sub-frame.

Installation in brickwall with corner frameThis corner sub-frame allows the installation of a fire rated doorset in a brick wall, maintaining its EI2’60 certification. The sub-frame is only visible on the hinges side, therefore the other side has to be filled with concrete.

27

With Guide Rail With link arm

Concealed Hinge [CH]Our Concealed Hinge can be used in all fired rated doors.

105º[ CH ]

Moderate use

Frequentuse

Intensive use

Concealed

Accessories

The door closer is an accessory, usually installed in the top of the door leaf and the top of the frame that allows a controlled closure of the door.

Panic DevicePanic bars are often installed on fire-doorsets. This accessory is designed to open the door immediately in case of emergency. The most commonly used bars are shown below:

2000N Model 4001N Model4000N ModelFor one-point lock single leaf doors. Consists of two panic bars 2000N model. The

automatic locking system on the inactive leaf is a cremone lock, allowing the internal rod to be activated with no need for additional installations on the leaf and guarantees the locking of the door at two points.

Consists of two panic bars, 2000N model and 2001N model. In contrast with the previous one, the locking mechanism is installed onto the surface of the leaf.

Door closer

When selecting a door closer the following aspects should be taken into consideration:• With Mark and the 4th digit of its classification has to be number 1, indicating its capacity

for fire rated doors.• The door closer force will calculated according to width and weight of the door.• Door closer frequency use : moderate, frequent or intensive.• Installation type : normal, inverted, parallel or reverse…

The door closer body is in the leaf.The door closer body is in the frame. The door closer body is inside the leaf. Only available with ECO Multigenius model with strength 3-S.

28

Electro-Magnet

An electro-magnet installed on a wall

Plate screwed onto a door

This mechanism consists of two parts: The electric current through the electro-magnet maintains the door opened, in case of ceasecurrent, the leaf is activated so the door closed.

All the electric-magnets installed have EC Mark.

Door selectorThe mechanism installed onto the upper frame of a double-leaf door makes the active leaf closed against the inactive leaf.

All the door selectors fitted onto fire doorsets have to cumply with EN 1158 STANDARD and EC Marking.

The vision panels accessories are designed to allow the light through without loosing the fire capacity, can be rounds or rectangulars.

If the doorset is tested according the EN 1634-1 Standard, its glass would be fire with CE Mark, if the contrary it will loose the test validity.

This glass ensures a high temperature capacity equivalent with door fire resistance EI2. Its thickness will depend on its fire classification test.

Ø 200 Ø 360

400 x 500 633 x 1900 653 x 1900 633 x 750 633 x 750

DeltaTuria DH

Turia DH TuriaTuria

30 / 60 90 / 120

EI2

Roun

d Po

rthol

eRe

ctan

gular

s Po

rthol

e

Vision Panels

Fire Rated LouversThe fire intumescent louvers allow the air flow without changing the fire resistance capacity.

These louvers include horizontal intumescent slits with a perimetral frame of the same material ensuring the maximum ventilation and fire resistance.

Detail of Intumescent Louver.

EI2 30 EI2 60 EI2 90

29

VERTICAL PALLET DELTA TURIA PREMIUM/SIGMA FONO-TURIA

Nº of Doors 15 un 13 un 15 unPallet width 0,95* mPallet lenght 1,18 mPallet height 2,27 m approxApprox. pallet weight 981* kg 1076* kg 1328* kg 1076* kg

* Order Reference 900 EI2 60.

HORIZONTAL PALLET DELTA TURIA / FONO-TURIA

Nº of Doors 12 unPallet width 0,95* mPallet lenght 2,10 mPallet height 1,10 m approxApprox. pallet weight 809* kg 887,6* kg

* Order Reference 900 EI2 60.

VERTICAL PALLET TURIA DH SIGMA DH / PREMIUM DH

Nº of Doors 7 unPallet width 1,75* mPallet lenght 0,79 mPallet height 2,27 m approxApprox. pallet weight 991,44* kg 1187,44* kg

* Order Reference 900 DH 1700 EI2 60.

The single-leaf DELTA, VOLTA and TURIA doorset can be delivered on either horizontal or vertical pallets. The characteristics of both packaging systems are shown below:

Packaging And Weight

The TURIA DOUBLE LEAF doorset, due to its weight and dimensions, is packed on vertical pallets. The technical characteristics of this packaging system are shown below:

Fire-Doorset TestsFire Rated LouversThe Research and Development Department at E-doors is equipped with an oven similar to those found in certified laboratories to carry out fire-resistance tests on its doorset. This allows the company to speed up the tests for new designs in order to adapt them to current regulations and to the changing needs of the market.

The own oven where fire-resistance tests are carried out.

Details of two fire-doorsets in the oven during a fire-resistance test.

Detail of the thermocouples allowing the control of thermal insulation in fire-doorset during a fire-resistance test.

Vertical pallet Horizontal pallet

Vertical pallet

30

IK 10Index

Prot

ec

tion level degree IP 2.0Index

Prot

ec

tion level degree

ANDREU BARBERA S.L.Ciudad de Sevilla, 20

Pol. Ind. Fuente del Jarro46988 Paterna (VALENCIA)

ESPAÑA

OC-P/137 0099/CPP/A44/0120 06

EN 1935 : 2002 (galva) 4 7 5 1 1 3 0 12

EN 1935 : 2002 (inox) 4 7 5 1 1 4 0 12

All our fire-doorsets have been certified by approved laboratories in order to guarantee the fulfilment of the requisites established by the regulation of each country. This certification appears on an identification plate which indicates, among other characteristics, the fire-resistance and the test number for this certification. The doorset also include one of the labels as shown below:

Fire-doorset Certification

Identification plate Identification labels

Durability TestsAll our fire rated doorset have been tested to a Closing Durability Test according the EN1191-1 : 2000 Standard.

All our range of products passed the 200.000 opening and closing cycles, obtaining a C5 classification.

CE Mark Hinges without SpringThe fire-rated Andreu doorset are equipped with new hinges without spring, own manufacturing.

These hinges have been tested and certified by approval laboratories and achieve the CE Mark according the EN 1935.

CE Mark Hinges without Spring

Guarantee a protection level IK 10, according to the rule UNE EN 50102 “Degrees of protection provided by the material wrapping the electrical components against external mechanical hits. (code IK).

Degree IP classification is obtained after carrying out the test following the rule UNE 20324 and it’s shown with 2 digits. First one, goes from 0 to 6, is showing the size of the body that the wrapping material is allowing the entrance. For E-doors meter boxes degree 2 indicates that they are protected against a body bigger than 12 mm. Second one, goes from 0 to 8, is showing the protection level of the equipment inside the meter box against the water entrance. Degree 0 indicates that they don’t have any specific protection against water entrance.Moreover, E-doors meter boxes have a Degree IP 2.0. which shows the protection level of the wrapping material against the entrance of water and unknown objects.The following E-doors meter boxe’s:- Fire resistant model Turia 1 and 2 leaves- Fire resistant model Lex- Fire resistant model Basic- Ensambladas 1 and 2 leaves- Company meter boxes: model Electro, Vent and Liso

31

www.e-doors.nl

CCFI

0403

14

Engineering

Branddeur