Text mode Linux Installation Part 01

Author :-Subhasis Nayak

Author :- Subhasis Nayak. 1

For more tutorial on Linux click here


There are different sources from which you can install Linux. These are as below Standard inastallation/ CD-ROM or removable media

installation(through a cd or dvd of linux) Network Installation(Before installing you must have the

proper physical network connection to the server from where you want to install the linux. Here you as an linux administrator boot into a limited version and additional componets will be downloaded from the server over network during the installation process.)

Disk imaging installation(This installation normally helps to install multiple systems with same type of configuration).


Here we will choose the standard installation.Now, we use a bootable CD/DVD to do the installation. Once you put your Linux cd/dvd into the cd/dvd tray restart your system.

After restart, if your 1st boot device is cd/dvd then it will boot from Linux cd/dvd else you have to change that. Once you have done your linux installation will start. Just go to the next slide to start installation process.

Once we will boot from cd/dvd we will meet this screenType [linux text] at

Once we will boot from cd/dvd we will meet this screenType [linux text] at


After typing it will look like this.Hit <enter> key

After typing it will look like this.Hit <enter> key


DVD/ CD is starting the 1st booting process from your drive

DVD/ CD is starting the 1st booting process from your drive


In this screen

CD/DVD starts

the booting process

In this screen

CD/DVD starts

the booting process

Here before installing the OS from your media, installer asks you to check the your media for accuracy. You mat check it. It will test your cd/dvd for any errors. I know my dvd id perfect so i am going choose <skip> on the next slide.

Here before installing the OS from your media, installer asks you to check the your media for accuracy. You mat check it. It will test your cd/dvd for any errors. I know my dvd id perfect so i am going choose <skip> on the next slide.


Read it carefully

As i told you i choose <skip> with help of <tab> key and <space > key

As i told you i choose <skip> with help of <tab> key and <space > key


Now our linux anaconda installer starts to install LInux

Now our linux anaconda installer starts to install LInux


HI! Friends our anaconda installer is ready to install Linux. It welcomes you to install Linux.Next slide i will hit <enter> key. Now i will hit <enter> key to start installation process.

HI! Friends our anaconda installer is ready to install Linux. It welcomes you to install Linux.Next slide i will hit <enter> key. Now i will hit <enter> key to start installation process.


Installer asks you to choose your language. Choose one you like. Ichoose English and then use <tab> key and select [ok] then hit <enter> key

Installer asks you to choose your language. Choose one you like. Ichoose English and then use <tab> key and select [ok] then hit <enter> key


Choose your keyboard . I select US key board and then select [ok] and hit <enter> key

Choose your keyboard . I select US key board and then select [ok] and hit <enter> key


Once you complete the Keyboard configuration ,you will ask for installation number. You may enter it if you have not select “skip entering....”

Once you complete the Keyboard configuration ,you will ask for installation number. You may enter it if you have not select “skip entering....”


I am not with installation number so i select “skip entering....” and select [ok] and press <enter> key.

I am not with installation number so i select “skip entering....” and select [ok] and press <enter> key.


If you are not entering installation number, the installer gives a [skip warning] and for last time it gives the chance to enter the installation number, to do that select [back] button and press <enter> key. I am skiping it.

If you are not entering installation number, the installer gives a [skip warning] and for last time it gives the chance to enter the installation number, to do that select [back] button and press <enter> key. I am skiping it.


Once you finish with installation number game you are ready to to do partition and format the disk. The linux disk utility will let you to do the partition. It reminds you 1st that if you have any data it will be lost if you create a new partition. I select [yes] button and move forward by pressing <enter> key.

Once you finish with installation number game you are ready to to do partition and format the disk. The linux disk utility will let you to do the partition. It reminds you 1st that if you have any data it will be lost if you create a new partition. I select [yes] button and move forward by pressing <enter> key.


Linux installation needs partitioning our hard rive. You can choose any one partition option.i will show you “create custom layout”

Linux installation needs partitioning our hard rive. You can choose any one partition option.i will show you “create custom layout”


I select “create custom layout” then select [ok] and Press <enter> key.

I select “create custom layout” then select [ok] and Press <enter> key.


The next part will be uploaded soon. Until then keeping clicking my linux training site

http://technotraining.wordpress.comFor PHP,JAVA,VB.NET and etc

programming visit my bloghttp://excellentprogramming.blogspot.

com Author :- Subhasis Nayak. 19

Education

Text mode Linux Installation Part 01