Upload
ali-osman-oencel
View
498
Download
4
Embed Size (px)
Citation preview
Görüntü kalitesi ve kapsamı kaynağa ve kayıtçıya bağlıdır.
Jeofizik Mühendisliği Bölümü İstanbul Üniversitesi
Prof. Dr. Ali Osman Öncel [email protected]
Saha Sismolojisi
http://www.istanbul.edu.tr/mb/fieldGeo/sismoloji.html
Süre: 20 Mayıs 2013
Sektörden Eğitime Katkı başlıklı POSTERİ
size katkı veren şirketlerin e-maillerine
yolluyorsunuz, kendinize özgün bir şekilde
teşekkür ediyorsunuz
Proje Teklifi Yazılması ile ilgili olarak ekte ki soruna bağlı olarak
teklifler, her bir grup için ayrı olarak yazılacaktır. Ücretlendirmede
referans olarak Jeofizik Odası Birim Fiyat ücretleri kullanılacaktır.
Teklif içerisinde, uygulanacak yöntemler ve çalışma profilleri,
süresi ve teklif edilen ücret yazılacaktır. Süre 1 Mayıs. Proje teklifi
yazılmasında SEKTÖR’den katkı ve yardım alabilirsiniz. En iyi
TEKLİFTEN en zayıf TEKLİFE göre derecelendirme yöntemi esas
alınarak, Proje Teklifleri değerlendirilecektir.
Bitenler Yapılacak
Çok slayt kullan.
Koyabildiğin kadar fazla bilgi paylaş.
Küçük punto kullan.
Yayın ve kitaplardan şekilleri olduğu gibi al, ve
sakın onları büyütme.
Dinleyenleri küçümsemeyi unutma, ve arada nasıl
yetersiz olduklarını hatırlat.
Değişik karakterler ve renkler kullan.
Konuşmanı önceden düzenleme.
Asla ve kesinlikle önceden kısa ve detaylı prova
yapma
Sunumlarını izleyenlere oku.
Projeksiyona yüzünü dön, konuşabildiğin kadar
hızlı konuş, özellikle önemli noktaları anlatırken.
Pointer odanın etrafında çevir, ve an azından
sunumda ki şekiller üzerinde hızlıca gezdir.
Verilen sürenin tamamını kullan, ve senden sonraki
takip eden konuşmacının zamanının en azından
yarısını almaya çalış.
Kaynak:
http://helios.hampshire.edu/
~msbNS/ns121/truly_terrib
le_talk.html
Remi Yöntemleri - Remi Method
Örnek Çalışmalar - Case Works
•Acquire 10, 30 seconds microtremor data at 2ms sampling along a linear array.
•Array length depends on depth of investigation. Crooked line geometry can be
handled. Thorson and Claerbout, 1985
A(p=p0+ldp, t=kdt) = S A(x =jdx, t =idt = t+px)
Adım 1: p-t dönüşümü
24
1 0 30 Time, seconds
McMechan and Yedlin, 1981
A courtesy of Dr. Satish Pullammanappallil
Transforming data from the T-X domain into p-t domain where p is the ray
parameter or slowness, p=Δt/ Δx=1/V, and t=t- p x pp.60, Gadallah and Fisher, 2005
SA(|p|,f ) = [SA(p,f)]p>=0 + [SA(-p,f)]p<0 : Stotal(|p|,f ) = S SAn(p,f)]
SA(p,f ) = FA*(p,f) FA(p,f)
Adım 3: Spektral Hız Analizi Güç Spektrumu
Louie, 2001
A courtesy of Dr. Satish Pullammanappallil
Adım 2: Fourier dönüşümü
F A( p,f = mdf) = S A( p,t =kdt)ei2p m df kdt
Dispersion PicksDispersion PicksGörünür faz hızının alt limiti
gerçek faz olarak yorumlanabilir
(Louie, 2001)
Adım 4: Interaktif Düz Hız Modellemesi
Ters çözümle ilgili belirsiz
olan bölümlerden kaçın,
modellerken sınırları yorumcu
göz önüne alabilir. A courtesy of Dr. Satish Pullammanappallil
• Veri toplama ve analizi ortalama 3 saat alır
• Profil boyunca açılımdan başka özel bir fiziksel sınırlaması yoktur Veri yollarda, binalarda ve aktif üretim sahalarında toplanabilir.
• Özel bir jeofizik ekipmana gerek yoktur
• Standart kırılma sismografı & kırılma P-dalgası Jeofonları kullanılabilir
• Özel yapay sismik kaynak bulunmasına gerek yoktur Ortamda ki gürültüleri kullanır: Sessiz alan zorunluluğu yoktur
• Can be used offshore as effectively as on-shore
A courtesy of Dr. Satish Pullammanappallil
Remi Yöntemleri - Remi Method
Örnek Çalışmalar - Case Works
Low-frequencies, 1-20 Hz, so bad geophone plants still work.
Modified after 2005 Presentation of Dr.J.Louie
"lin
e"
of
fift
ee
n R
eft
ek
125
"T
exa
n"
record
ers
The source of energy:
Betsy M3 Seisgun From: http://www.passcal.nmt.edu/%7ebob/passcal/venezuela
That is what named as “Model 130-01” which was ordered for
ESD in 2006. From: http://www.reftek.com/productshome.html#Seismic%20Recorders
• Approximately 60 km in length
Followed San Gabriel River Bike Path
20 m takeout interval, 300 m array, recorded for 30
min
• 4 teams, 3 people each, 4.5 days
• 120 IRIS/PASSCAL “Texan” single-channel
recorders mated to a vertical 4.5-Hz
geophone Supported by USGS, NEHRP
ERP and IRIS-PASSCAL Modified after 2005 Presentation of Dr.J.Louie
Los Angeles Transect
Oregon State University Geotechnical Engineering
Field Research Test Site
•36 10-Hz geophones with 10 ft spacing deployed along a linear array
p-f Image with Dispersion Modeling Picks
A courtesy of Dr. Satish Pullammanappallil
Case Study 1
-100
-80
-60
-40
-20
0
300 800 1300 1800 2300
Shear-Wave Velocity, ft/s
Depth
, ft
Vs, ft/s
Oregon State University Geotechnical Engineering
Field Research Test Site30
36 10-Hz geophones with 10 ft spacing deployed along a linear array
A courtesy of Dr. Satish Pullammanappallil
Case Study 1
Oregon State University Geotechnical
Engineering Field Research Test Site
Shear-wave profile from ReMi overlain on refraction velocity model from refraction analysis
A courtesy of Dr. Satish Pullammanappallil
Case Study 1
-160
-140
-120
-100
-80
-60
-40
-20
0
400 500 600 700 800 900 1000 1100 1200 1300 1400
Shear-Wave Velocity, ft/s
Dep
th, ft
Cross-Hole-99-01
Pre-Grout ReMi, V30=673 ft/s
Post-Grout ReMi, V30=827 ft/s
Grout Treatment
Zone
Wickiup Dam, Deschutes National Forest, Oregon
•Comparison of Cross-hole and SeisOpt ReMi at Wickiup
A courtesy of Dr. Satish Pullammanappallil
Case Study 2
Case Study: ReMi Study across fault zone
Purpose: Verify Depth to bedrock
A courtesy of Dr. Satish Pullammanappallil
Case Study 3
Case Study 4
Scott et al., 2006
Case Study 4
Vs30 according to an alluvium-depth model derived from a
basin-gravity survey (Abbott and Louie, 2000) versus the
measured values of Vs30 along the transect, with ±20% error
bars on the measurements. Fig 8 of Scott et al., 2006
Case Study 4
• ReMi Vs profiles can be used for:
• Earthquake site response
• IBC site classification based on 100 ft (30m) average shear-wave velocity
• Site amplification maps
• Mapping the subsurface and estimating the strength of subsurface material
• Couple with P-wave information one can derive Poisson ratio and other engineering parameters
• Complementing seismic refraction analysis in areas characterized by near-surface velocity reversals
• Maps low velocity zones that refraction cannot
• Extend depth of investigation in some cases
• Finding buried cultural features such as dumps and fill material in submerged structures
• Offshore projects
• Soil classification
• Depth to bedrock
A courtesy of Dr. Satish Pullammanappallil
• Compares well with previously used 1-D shear wave measurement techniques: Economic, accurate and reliable
• Correlates with SCPT measurements
• Detects velocity reversals
• Matches average velocities obtained using OYO logger
• Greater depth of investigation compared to borehole and surface methods
• Trends similar to velocity measurements from cross-hole
• Data acquisition and analysis takes about 3 to 4 hours
• Determine subsurface properties
• Derive parameters useful for geotechnical engineering
• Determine properties of buried fill material
• Perform site specific seismic characterization studies efficiently & economically
• Minimizes number of boreholes required
• No permitting required
• Can be carried out in urban settings
• Uses ambient noise as seismic energy source
• Offshore application • Determine seismic soil classification standards for offshore projects
A courtesy of Dr. Satish Pullammanappallil