Pass cisco 200 101

http://www.pass4sures.co/200-101.html

After you purchase our product, we will offer free update in time for one year.pass4sures Practice Exams for Cisco CCNA 200-101 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development. pass4sures 200-101 braindumps including the examination question and the answer, complete by our senior IT lecturers and the CCNA product experts, included the current newest 200-101 examination questions.included the current newest 200-101 examination questions.


The exam does not test particular master learning inside a specific fragmentof the business. Passing the exam mirrors an propelled information of awide range of parts of the culinary field. All things considered, your odds ofprogress will increment on the off chance that you have a workinginformation of the significant ethnic cooking styles, a careful establishmentin strategies, and a commonality with sanitation prerequisites also, essentialsustenance. To guarantee secrecy and objectivity, examinations arerecognized to those scoring by number instead of by the applicant's name. Arecognized to those scoring by number instead of by the applicant's name. Apassing score on the exam is 70%. More than 90% of those taking the exampass it on the main attempt.


Pass4sure Interconnecting Cisco Networking Devices Part 2 products provide you an easiest way to grasp syllabus content and perform excellently in the real exam scenario. Pass4sure’s Cisco 200-101 products are in line with the real exam requirements, hence serve you the best to answer all exam questions and ensure outstanding percentage. Designed into Q&As pattern, Pass4sure’s braindumps, Study Guides, practice Tests, Exam Engine best suit your needs in affordable prices.your needs in affordable prices.


If you use pass4sures braindunps as your 200-101 Exam prepare material, we guarantee your success in the first attempt. If you do not pass the 200-101 exam (Interconnecting Cisco Networking Devices Part 2 (ICND2)) on your first attempt we will give you a FULL REFUND of your purchasing fee,if you purchase 200-101 Q&A,enjoy the upgrade Q&A service for free in one year.


Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 200-101 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 200-101 Exam:100% Guarantee to Pass Your CCNA exam and get your Cisco certification.


Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 200-101 Exam will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 200-101 Exam:100% Guarantee to Pass Your CCNA exam and get your Cisco certification.


•200-101 Questions Based on Real Exams Scenarios•Experts Verified Questions and Answers•Easy to use Testing Engine & print PDF format•Download Free 200-101 Demo (Try before Buy)•According to recommended syllabus and Objectives•100% Pass Guaranteed•90 days free updates (testing engine)


Question No : 1 - (Topic 1)

Given the output shown from this Cisco Catalyst 2950, what is the reason that interfaceFastEthernet 0/10 is not the root port for VLAN 2?

A. This switch has more than one interface connected to the root network segment inVLAN 2.B. This switch is running RSTP while the elected designated switch is running 802.1dSpanning Tree.C. This switch interface has a higher path cost to the root bridge than another in thetopology.D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.

Answer: C



The output that is shown is generated at a switch. Which three statements are true?(Choose three.)(Choose three.)

A. All ports will be in a state of discarding, learning, or forwarding.B. Thirty VLANs have been configured on this switch.C. The bridge priority is lower than the default value for spanning tree.D. All interfaces that are shown are on shared media.E. All designated ports are in a forwarding state.F. This switch must be the root bridge for all VLANs on this switch.

Answer: A,C,E



Which switch provides the spanning-tree designated port role for the Which switch provides the spanning-tree designated port role for the network segment thatservices the printers?

A. Switch1B. Switch2C. Switch3D. Switch4

Answer: C



What would be the destination Layer 2 address in the frame header for a frame that isbeing forwarded by Dubai to the host address of 172.30.4.4?

A. 825B. 230C. 694D. 387

Answer: C


Question No: 5 - (Topic 5)

What are the two default metrics used by EIGRP for route selection? (Choose two.)

A. BandwidthB. DelayA. BandwidthB. DelayC. ReliabilityD. LoadE. MTU

Answer: A,B



Which two options are valid WAN connectivity methods? (Choose two.)

A. PPPB. WAPC. DSLB. WAPC. DSLD. L2TPv3E. Ethernet

Answer: A,C



Which statement describes an EIGRP feasible successor route?

A. Aprimary route, added to the routing tableB. Abackup route, added to the routing tableC. Aprimary route, added to the topology tableB. Abackup route, added to the routing tableC. Aprimary route, added to the topology tableD. Abackup route, added to the topology table

Answer: D



What can be done to Frame Relay to resolve split-horizon issues?(Choose two.)

A. Disable Inverse ARP.B. Create a full-mesh topology.C. Develop multipoint subinterfaces.B. Create a full-mesh topology.C. Develop multipoint subinterfaces.D. Configure point-to-point subinterfaces.E. Remove the broadcast keyword from the frame-relay map command.

Answer: B,D



A. EIGRP does not support VLSM.B. The EIGRP network statements are incorrectly configured.C. The IP addressing on the serial interface of RouterA is incorrect.D. The routing protocol has summarized on the classful boundary.E. EIGRP has been configured with an invalid autonomous system number.

Answer: D


Question No: 10 CORRECT TEXT - (Topic 6)

A new switch is being added to the River Campus LAN. You will work to complete thisprocess by first configuring the building_2 switch with an IP address and default gatewayFor the switch host address, you should use the last available IP address on themanagement subnet. In addition, the switch needs to be configured to be in the same VTPmanagement subnet. In addition, the switch needs to be configured to be in the same VTPdomain as the building_1 switch and also needs to be configured as a VTP client. Assumethat the IP configuration and VTP configuration on building_1 are complete and correct.The configuration of the router is not accessible for this exercise. You must accomplish thefollowing tasks:Determine and configure the IP host address of the new switch. Determine and configurethe default gateway of the new switch. Determine and configure the correct VTP domainname for the new switch.Configure the new switch as a VTP client.

Answer: Here are the Steps for this Lab Solution



Education

Pass cisco 200 101