32
Regional Roundtable on World Programme for the Census of Agriculture 2020 Budapest, Hungary 3-7 April 2017 Jairo Castano Senior Statistician Leader, Agricultural Census and Survey Team FAO Statistics Division Methodological Considerations Technical Session 3 1

Methodological considerations for the census design : Technical Session 3

  • Upload
    fao

  • View
    50

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Methodological considerations for the census design : Technical Session 3

Regional Roundtable on World Programme for the Census of Agriculture 2020

Budapest, Hungary 3-7 April 2017

Jairo CastanoSenior Statistician Leader, Agricultural Census and Survey TeamFAO Statistics Division

Methodological ConsiderationsTechnical Session 3

1

Page 2: Methodological considerations for the census design : Technical Session 3

2

Contents• Background• Overview of census modalities:

description, implementation steps, advantages and limitations:

1. Classical approach2. Modular approach3. Integrated census/survey modality4. Use of registers as a source of census

data• Country examples

Page 3: Methodological considerations for the census design : Technical Session 3

BackgroundThe WCA 2020 broadened the approaches introduced in

WCA 2010, acknowledging that the census of agriculture can be conducted in different ways, using four main modalities: Classical approach Modular approach Integrated census and survey modality Use of registers as a source of census data

Main aim is to help countries to implement a census in the most efficient way, taking into account countries’ particular conditions.

3

Page 4: Methodological considerations for the census design : Technical Session 3

Overview of census modalitiesi) The classical approach: a census conducted in a single one-off

operation (usually by complete enumeration) comprising the universe of agricultural holdings.

ii) Modular approach: comprises: a) a core module undertaken by complete enumeration including all relevant frame items and eventually other items; and b) supplementary modules conducted using sample enumeration.

iii) The integrated census and survey modality: integrates a multi-year programme of censuses and surveys. One option is AGRIS, a modular survey programme which has to be articulated with the agricultural census programme and conducted on an annual basis between two censuses.

iv) Use of registers as a source of census data: registers and other administrative sources are used as a source of census data in combination with field data collection. 4

Page 5: Methodological considerations for the census design : Technical Session 3

Comparison of census modalitiesClassical Modular Integrated

census/surveyUse of registers

Enumeration phases

One-off field operation

Multiple phases:a) core moduleb) supplementary module(s)

Multiple phases:a) census core moduleb) rotating thematic modules

One or more field operations and use of admin sources

Coverage of items

All census items collected in one-off operation

Core module includes items required at the lowest geo/admin level, and those to establish frames for supplementary module(s)

Census core module includes items required at the lowest geographic/admin level, and those to establish frames for rotating thematic module(s)

Census items are collected through field operation and use of administrative sources.

Enumeration method

Complete enumeration exclusively or combined with sample enumeration

Complete enumeration for core module and sampling for supplementary modules(s)

Complete enumeration for census core module and samplingfor rotating thematic modules

Complete enumeration exclusively or combined with sample enumeration

5

Page 6: Methodological considerations for the census design : Technical Session 3

Alternative census modalities• The classical approach is the most extensively used census

modality. However, more and more countries would use alternative census modalities in the near future.

• There are important reasons for using other census modalities:

i. budget limitation for census; ii. need to produce more frequent and timely agricultural

statistics; iii. fast growing digital and mobile technology; iv. increasing availability and access to data from

administrative sources and technical capacities to handle such data;

v. reluctance of some population groups to participate in the census and need to reduce respondent burden.

6

Page 7: Methodological considerations for the census design : Technical Session 3

Some common issues for any census modality Identify data content of the census:

The minimum requirement for a census, is to include all essential items, in order to enable national/international comparison and frame items for census modules or/and follow up surveys.

The final list of census items should be established in consultation with main stakeholders depending on country’s requirements, availability of reliable administrative and other data sources, financial and other resources.

In countries with well-developed registers, the use of administrative data sources (ADS) to cover census data items should be considered. 7

Page 8: Methodological considerations for the census design : Technical Session 3

Some common issues for any census modality (cont’d.)

The frame for the census must be carefully established to ensure that all holdings are covered with no omissions or duplications.

Use of sample enumeration efficiency considerations (precision versus costs);desired level of aggregation for census data;use of the census as a frame for ongoing sample

surveys;data content of the census; capacity to deal with sampling methods and

subsequent statistical analysis based on samples.8

Page 9: Methodological considerations for the census design : Technical Session 3

Some common issues for any census modality (cont’d.)Use of thresholds

◦ In many countries, a minimum size limit is adopted for holdings included in the census.

◦The rationale for this could be: in the country there is a large number of

very small holdings which make a marginal contribution to total agricultural production; and

their inclusion in the census greatly increases the workload and census budget.

9

Page 10: Methodological considerations for the census design : Technical Session 3

1. The classical approach• It is conducted as a single one-off operation in

which all the census information is recorded. It also includes the short-long questionnaire concept.

• All items collected at the lowest geo/admin level.• Can be conducted by complete enumeration, sample

enumeration, or by a combination of both. • It is appropriate, for instance, when countries have

an integrated census/survey programme or wishing to collect census items at the lowest geo/admin level.

10

Page 11: Methodological considerations for the census design : Technical Session 3

1. The classical approach: types of questionnaires• Single questionnaire: administered to all agricultural holdings covered by

the census without regard of their type. It is easy to apply in the field.• Short-long questionnaire: The short questionnaire is administered to all

holdings on a complete enumeration basis (to collect basic info), while the long questionnaire is administered only to: holdings identified according to certain criteria (to collect more detailed info),

such as being above an established threshold or belonging to a particular segment of the population;

a sample of holdings.• Other types of questionnaires - specific census questionnaires:

to fit different segments of the target population (such as household and non-household based holdings); or

for different provinces when these differ considerably in cropping and livestock systems, and in agricultural practices. 11

Page 12: Methodological considerations for the census design : Technical Session 3

1. Classical approach: advantages• Snapshot of the entire target population at a specified period.

Comprehensive data sets at the lowest admin/geo level. • Data can be produced at lowest admin/geo levels with no sampling

error. Tabulations can be done in line with high user’s requirements, including data for small administrative units and information on rare events, such as emerging crops, rare crops and types of livestock.*

• Complete enumeration is much less demanding in respect of the characteristics contained in the frame than the sample-based census.

• A good basis for building up a statistical farm register and an exhaustive sampling frame for subsequent regular agricultural surveys.*

* When census is conducted by complete enumeration

*12

Page 13: Methodological considerations for the census design : Technical Session 3

1. Classical approach: limitations*

• Cost and administrative complexity.• It implies a high burden on respondents.• Risk to overburden the census questionnaire because of

the high pressure from some policy makers or other stakeholders to include detailed items to collect data at the lowest administrative level.

• Logistics: very large number of enumerators and supervisors required.

• The amount of data to be processed is larger.

* Mainly when census is conducted by complete enumeration13

Page 14: Methodological considerations for the census design : Technical Session 3

2. Modular census• Has a clearly distinguishable core module (on a

complete enumeration basis) and one or more supplementary modules (on a sample basis).

• An essential condition: data from the core module used as frame for the supplementary module(s). The census using the short-long questionnaire in one operation is not considered as modular census (no frame use).

• A ‘module’ is defined as a group of data items to be collected on a specific target population (e.g. holdings with livestock).

• All essential items should be covered by the core and supplementary module(s). 14

Page 15: Methodological considerations for the census design : Technical Session 3

2. Modular census (cont’d.)• Core module (CM) must include the items required at the

lowest geographic or administrative levels, and/or needed to establish sampling frames for the supplementary module(s).

• CM should include all frame items. It should also cover rare events (unusual crops or livestock), which would not be possible to estimate from SM(s) because of high sampling errors.

• SM(s) use the frame generated by the core module to target specific populations and should include the rest of the agreed census items that are not included in the core module.

15

Page 16: Methodological considerations for the census design : Technical Session 3

2. Modular census modality: ways and steps for implementation Two ways of implementing the modular approach:

i. implementing core and supplementary modules separately (common way)

ii. implementing the core module and the supplementary module(s) as part of a single data collection operation (difficult in practice).

Sources of frame data for supplementary modules:a) The census core module;b) An agricultural module/section of the population

census;c) Administrative registers.

16

Page 17: Methodological considerations for the census design : Technical Session 3

2. Modular census: advantages• The combination of core’s and SM’s items allows the

modular census to produce a wider and country-specific range of data, for which small area estimates are not so important.

• More effective use of available budget to collect country relevant information.

• Allows a focused and more detailed training of field personnel.

• Countries with a not well established system of agricultural surveys and limited budget may find the modular approach as a logical first step towards the creation of a system of integrated agricultural censuses and surveys.

17

Page 18: Methodological considerations for the census design : Technical Session 3

2. Modular census: limitations• Risk of having a CM with too many items (due to pressure from stakeholders).• The availability of well trained professional staff in sampling could be a

challenge.• There are limitations in terms of cross-tabulation between variables in the core

and in the supplementary modules (SMs) or between variables in different SMs not conducted jointly.

• If the time lag between the implementation of the CM and SMs is too long, the benefit of having a good frame from the CM disappears. A frame update would be needed adding to the cost.

• If SMs are undertaken at the same time as the CM there exists the risk of loss of data quality if not properly organized.

• It could be difficult to mobilize additional funds for SMs.• In the absence of good planning, the conducting of the CM and publication of

results can jeopardize a better preparation of SMs.

18

Page 19: Methodological considerations for the census design : Technical Session 3

3. Integrated Census/survey modality• This new modality features a census core module (to be

conducted on a complete enumeration basis) and a number of several rotating thematic modules (to be conducted annually or periodically on sample basis over a 10-year period).

• An example of a survey programme with rotating thematic modules is the new Agricultural Integrated Survey programme (AGRIS).

• All essential items should be covered by the census core and rotating thematic modules.

• The census core module should mainly provide frame data needed to implement rotating thematic modules.

19

Page 20: Methodological considerations for the census design : Technical Session 3

3. What is AGRIS?• The AGRIS is a modular survey program which is to be

articulated with the agricultural census programme and conducted on an annual basis between two censuses.

• It consists of one annual production module (crop and livestock production) and four rotating modules: ‘economy’, ‘labour force’, ‘machinery and equipment’, and ‘production methods and environment’. Additional modules can be added as needed.

• In the integrated census and survey modality, AGRIS annual-production and rotating modules are synchronized with the agricultural census core module and operate over a 10-year cycle. 20

Page 21: Methodological considerations for the census design : Technical Session 3

3. Integrated census/survey: recommended modules flow

 Years 0 1 2 3 4 5 6 7 8 9 10

Agricultural Census core module (•) and inter-census survey (o) •

       o          •

AGRIS Production Module

Holding roster (ID & socio-demo)   • • • • • • • • • •Crop/livestock production   • • • • • • • • • •Key thematic issues   • • • • • • • • • •

Rot. Module 1 Economy     • •   •   •Rot. Module 2 Labour   • •      Rot. Module 3

Machinary, Equiment, Assets and Decisions

   •      Rot. Module 4

Production Methods and Environment       •      •    21

Page 22: Methodological considerations for the census design : Technical Session 3

3. Integrated census/survey modality: advantages

• Effective use of available budget to collect country relevant information on an annual basis.

• More detailed information available on topics of interest.

• Focused training of field staff.• Wider set of census items.• Allows the establishment of a system of integrated

agricultural censuses and surveys.

22

Page 23: Methodological considerations for the census design : Technical Session 3

3. Integrated census/survey modality: limitations• The risk of expanding too much the census core

module resulting in high cost which will reduce the relative benefits of this modality.

• Conducting the census core module and AGRIS annual production at the same time (when relevant) requires good survey planning and sampling capacity.

• The limitations in terms of cross-tabulation between variables in the production and in the rotating thematic modules or between variables in different rotating thematic modules not conducted jointly.

• Difference in the reference period for different census items collected in the census core and the items in the rotating thematic modules. 23

Page 24: Methodological considerations for the census design : Technical Session 3

4. Use of registers as a source of census data• A meaningful part of the census items for the entire

population of the CA (or for part of it) comes from existing admin sources created for non-statistical purposes.

• The data could come from one or several administrative sources. Usually these are used in combination with field data collection.

• Thus the definition of the population of interest and the data collection protocols commonly is out of the control of the census agency.

• As the objects already exist in the data source, a selection need to be made of objects (holders or holdings) and variables that are relevant to the census. 24

Page 25: Methodological considerations for the census design : Technical Session 3

4. Use of registers:Quality considerations Some information in administrative sources could be of low importance for

administrative purposes which may result in lower statistical quality. The purpose and method used to collect data should also be taken into account

to detect possible systematic errors or systematic bias in the register. The following quality aspects need to be carefully considered:

Relevance (content) of the administrative data sources. Accuracy: an admin source is of good quality if a large proportion of the variables

required for the census exists in the register and data are reliable. Data coverage: one important accuracy category: under-coverage or over-coverage of

units, and misclassification of items. Unreported events: data related to the reference period are not available in the source

referring to an event from which parameters are to be derived: e.g. births, deaths or loss, sales, etc. of livestock.

The information from administrative sources has to be coherent and comparable with data from other sources and over time.

The timeliness dimension (difference between the reference period and the availability of the results) when using administrative data source.

Accessibility in terms of physical access to the information in the admin source. 25

Page 26: Methodological considerations for the census design : Technical Session 3

4. Use of registers: Ways of using1. The starting point (like in all census modalities) is to define the data content

of the census in terms of data items to be covered.

2. Next step is to decide on the way to use the admin source. Possible ways or approaches are:

Split data approach: admin sources are used to provide some of the variables for all of the holdings.

Split population approach: Data from admin sources are used for some holdings where these data are of sufficient quality, and other statistical sources are used for the remainder of the holdings.

Combining the two approaches: administrative sources replace the field data collection for some of the variables for part of the holdings.

Pre-filling answers in the questionnaires which are to be checked by respondents during the census.

Totally replacing the census data collection, on all census characteristics and for all units in the census with data coming from one or more admin sources (no common).

26

Page 27: Methodological considerations for the census design : Technical Session 3

4. Use of registers: Implementation 1. Assess the usability of the source/register and quality (see

before);2. Assess legal basis (to access and use); consultations with

owners (concepts, definitions, classifications used, reference period, coverage); public support (to statistical use).

3. Design a government-wide project to outline responsibilities and the necessary work:

Make an inventory of sources, usability/quality. Develop the content for the census. Decide items to be produced from what kind of data

sources. Determine steps to link datasets. Develop communication strategy for the use of registers. Plan the budget for the particular preparatory work related

to the use of registers for the AC.27

Page 28: Methodological considerations for the census design : Technical Session 3

4. Use of registers: Advantages• Reduction of cost of census data production.• Reduction of the burden on respondents.• By combining the data collected in the field with the data from

administrative sources, new derived variables can be created.• It allows compilation and publication more frequently and faster.• Non-response rate can be either significantly reduced or

eliminated (when data on the entire target census population are included in the administrative sources).

• It could significantly improve the quality of the source and leads to a substantial harmonization of certain information between different institutions.

• As a result of more efficient and faster operation the public perception of statistics may become more favourable.

28

Page 29: Methodological considerations for the census design : Technical Session 3

4. Use of registers: limitations• Linkage of datasets are difficult/impossible if legal background is inadequate.• It could be very difficult to establish a good cooperation with register owners.• The cost for the access to the admin data could be too high.• When there is different population coverage, admin sources can be used for pre-

filling the questionnaires only on common population while other units need to be enumerated.

• Incoherence of concepts, definitions, classification and reference periods could hamper the use of admin sources.

• Problems related to linking data from various data sources.• Problems on quality or stability may arise due to political changes.• Timeliness and punctuality.• If an admin source is abolished, it is difficult to provide comparable statistical

data series.• Substantive or technical changes in the admin sources may not be detected

immediately.• Comparability over time is strongly influenced by the change in the level of

coverage in the different years and can give misleading results. 29

Page 30: Methodological considerations for the census design : Technical Session 3

Country examples

The frame for the AC 2010 was the administrative farm register (AFR) of the Min. of Economic Affairs, Agriculture and Innovation. Farmers have to register by law. The AFR contains names, addresses and other characteristics of holders or holdings and a unique registration number.

The agricultural census uses a higher threshold than the AFR, thus only agricultural holdings above the threshold are taken.

This threshold is applied to separate professional from hobby farmers, and to minimize processing burden.

Information on the census items existing in the AFR is taken directly from the register for the whole census population.

The Netherlands - Agricultural Census 2010 Combined agricultural census with use of administrative registers

Page 31: Methodological considerations for the census design : Technical Session 3

Country examples (cont’d.)

Statistical coverage (census statistical units): Family agricultural holdings above the threshold (1,000 m2

of agricultural land, or 1 cow and 1 calf/1 heifer, or 3 adult pigs, etc.) (Form P-2).

All business entities engaged in agricultural activity (Form P-3).

Complete enumeration: face-to face interview (PAPI). The Frame for family agricultural holdings:

established using listing operation (Household listing form (Form P-1)).

Post-enumeration survey: conducted next.

Montenegro - Agricultural Census 2010: Classical approach

Page 32: Methodological considerations for the census design : Technical Session 3

MANY THANKS

32