Location Reece – Unit 14: Producing a Print based Media ProductLocation

Time:Date:Why?

Image 1: Studio – Front Cover9am8th April 2016

Image 2: Light Room - Interview10.30am8th April 2016

Image 3: Dark Room - Double Page Spread10.45am8th April 2016

Picture RequiredShot Type:Props/Equipment:Lighting:Costume:Person/People:Why?

Medium Close Up/Close UpTripod, CanonBright lights with a dark backgroundBlack and White snapback, Skinny black jeans, Longline black t-shirt, Black hoodieWilliam Eze (Myself)The lighting needed for the images needed to be bright and it was essential because the front cover of my magazine is dark and I need to make sure the image is high quality

Medium Close UpTripod, CanonBright lightsBlack and White snapback, Skinny black jeans, Longline black t-shirt, Black hoodieWilliam Eze (Myself)

Medium ShotTripod, CanonMinimal lightBlack and White snapback, Skinny black jeans, Longline black t-shirt, Black hoodieWilliam Eze (Myself)\The lighting needed for the images needed to be very dark but not too dark to the point you can’t see the person at all. It was essential because the pictures taken from the interview for the magazine dps will need

so that the person at the front doesn’t fade in and lose focus of the main person on the cover.The only requirement I had was for the person to wear all black clothing, particularly jeans so that he can fit the criteria for what to loo like when modelling my magazine.

to be dark and requires a high quality setting so that the person at the front doesn’t fade in and lose focus of the main person in the pic.The only requirement I had was for the person to wear all black clothing, particularly jeans so that he can fit the criteria for what to loo like when modelling my magazine.

Permission RequiredContact needed to be madeEvidence of this

Because I’m modelling my own magazine, I don’t need any evidence as I can provide this myself so no extra reaches for signatures will not be required.

Because I’m modelling my own magazine, I don’t need any evidence as I can provide this myself so no extra reaches for signatures will not be required.

Because I’m modelling my own magazine, I don’t need any evidence as I can provide this myself so no extra reaches for signatures will not be required.

Potential Hazards/RisksLocation specificWhy?

Too much lighting- this could blind the person

Too much lighting- this could blind the person

Uneven carpet arrangement – because

modelling if too much light is exposed to the naked eye.Slippery floor- the person modelling could slip and potentially injure themselves.Broken camera- if camera was to break then that could be a hazard as glass will be anywhere and this could seriously injury someone if they were to slip or fall onto them.

modelling if too much light is exposed to the naked eye.Slippery floor- the person modelling could slip and potentially injure themselves.Broken camera- if camera was to break then that could be a hazard as glass will be anywhere and this could seriously injury someone if they were to slip or fall onto them.

the room is dark, it’s hard for the person being interviewed to see anything so he could potentially slip if the person placing the carpet can’t see themselves.Broken camera- if camera was to break then that could be a hazard as glass will be anywhere and this could seriously injury someone if they were to slip or fall onto them.