How to Set up the HD Encoder

for I-Camz.com

Why Should I Download the HD Encoder ?

We HIGHLY recommend that every model downloads the HD Encoder. Although your cam looks clear on your profile it may not look the same once you are streaming live.

The best way to see how your cam looks is by viewing yourself live at www.icamzlive.com by searching your display name. 

Even though your cam looks clear, HD encoder will also place you at the top of the website based on your category. Its free to download and will make your cam look more clear and to the best of its capability. 

HD encoder high quality video software features the best audio and video. Offering the best quality video will get you better placement on the streaming websites and will help you make more money. In order to take advantage of this new feature you must download, install, and configure additional software.  

What are the requirements for the HD Encoder?

• Mac or PC with a dual core processor or better• You must have an HD cam that can stream at 640 x 480 or better• An internet connection with sufficient bandwidth.

– Please take the Internet speed test

– http://www.speedtest.net

– Once complete, verify that your upload speed is at least 0.6 Mb/s or more

All of these requirements must be met in order for the HD Encoder to work properly

What are the benefits of using the HD Encoder ?

• Eligibility for the Party Chat feature

• Ranked higher on network sites

• More traffic to your room• Better cam quality =

better results

See the difference!

Instructions

• Log into your model profile from

http://www.i-camz.com/performerlogin.php • Highlight over the Support tab• Click on HD Encoder• Click Test and Download• Click on Download the Encoder by clicking either PC or

MAC• Install the HD Encoder

See next slide for proper HD Encoder settings

HD Encoder Settings

Select the webcam you would like to use

HD Encoder Settings

Select the webcam you would like to use

Select H.264 format

HD Encoder Settings

Select the webcam you would like to use

Click on the Wrench and select Main and

3.0 from the dropdown box

HD Encoder Settings

Select the webcam you would like to use

Select 12.00 fps Frame Rate

HD Encoder Settings

Select the webcam you would like to use

Select 640 x 480 Input Size

HD Encoder Settings

Select the webcam you would like to use

Select 650 Kbps Bit Rate

HD Encoder Settings

Select the webcam you would like to use

Type in 640 x 480 for the Output Size

HD Encoder Settings

Select the webcam you would like to use

Check the Deinterlace Box

HD Encoder Settings

Select the webcam you would like to use

If you would like to use your webcam as your audio device, select your webcam here.

If you have an HD Microphone and would like to use it, select it here.

HD Encoder Settings

Select the webcam you would like to use Select Mp3

Format

HD Encoder Settings

Select the webcam you would like to use

Select Mono

Channels

HD Encoder Settings

Select the webcam you would like to use

Select 11025 Hz

Sample Rate

HD Encoder Settings

Select the webcam you would like to use

Select 18 Kbps Bit Rate

HD Encoder Settings

Select the webcam you would like to use

Only Check Boxes Output Video and Audio, NOT Input

Video

HD Encoder Settings

Select the webcam you would like to use

Check Auto Adjust Box

HD Encoder Settings

Select the webcam you would like to use

Click on Drop Frames

HD Encoder Settings

Select the webcam you would like to use

Uncheck Save to File

Using the HD Encoder

• Log into your model profile

• Click on Start My Show

Click on External Encoding from the

Quality Settings

Using the HD Encoder

Click on the green Start My Show

button

Using the HD Encoder

This External Media Stream Box will pop up.

Copy the FMS URL

HD Encoder Settings

Select the webcam you would like to use

Paste the FMS URL Here

Using the HD Encoder

Now Copy the Stream ID

HD Encoder Settings

Select the webcam you would like to use

Paste the Stream ID Here

HD Encoder Settings

Select the webcam you would like to use

Click the Connect Button

HD Encoder Settings

Select the webcam you would like to use

Click the Start Button

Now You are Streaming in HD!

• Please note you will not be able to view yourself in the live chat interface

• We suggest placing the Encoder on half of screen and the chat interface on the half.

• We also suggest watching yourself live • Go to http://www.icamzilve.com/cam/YourProfileName/• Please note some models have underscores (_). You can

also find yourself by searching your model name at www.icamzlive.com

• Please note if you have any geographic restrictions you will not be able to search your model name

• If you need tech support or have any questions, please contact us at support@i-camz.com