Electricity

Learning the proper use of the basic electrical tools and instruments is as important as learning the precautionary measures to be observed when using them.

Screwdriver

Used to drive wood screws, straighten wires, and tighten locknuts.

Two types of screwdrivers: flats and philips

Pliers

Used to cut wires. There are three kinds of pliers: long nose, side cutting, and diagonal pliers.

Push-pull rule

Used to measure distances.

Soldering Iron

Used to solder two connecting wires

Wire Strippers

Used to strip or remove the insulation of the connecting wires.

Electrical DevicesA device is a unit of electrical system invented to carry but not utilize electric energy.

Switch

A device that connects and disconnects a circuit from a line.

Fuse

Is a device that automatically melts in cases of abnormal conditions like overloads and short circuits.

Circuit Breaker

A device used to interrupt an electrical circuit

Outlet

A device that acts as a convenient source of electrical power for current consuming devices

Lamp Holder

A device that holds an incandescent lamp

PPE (Personal Protective Equipment)- These are devices or equipment that can save someone from any accidents or injury in the workplace

Hard Hat Used to protect your head from falling debris

Rubber Gloves/ Insulated GlovesThis would help in preventing someone from burning his hand or even get electrocuted by any electric devices he may contact with while working

Face MaskPrevent someone from inhaling any substances or dust produced by the materials or tools while

GogglesUsed in protecting the eyes while working.