ASTM Standard on ApparelPRESENTATION ON

Presented by

• Shawan Roy• ID:11122107023• Intake: 5th

• Section: 01• B.Sc. In Textile Engineering• BUBT

Presented to

• Ms. Upama Nasrin Haq• Lecturer• Department of Textile

Engineering, • BUBT

About ASTM• American Society for Testing and

Materials full abbreviation of ASTM.

• But this organization known with this name until 2001.

• Now this organization known with ASTM International.

• This international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.

About ASTM• ASTM International, formerly known as the

American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards.

• Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence.

• ASTM’s leadership in international standards development is driven by the contributions of its members: more than 30,000 of the world’s top technical experts and business professionals representing 150 countries.

Standards of ASTM

• The standards produced by ASTM International fall into six categories:

I. The Standard SpecificationII. The Standard Test MethodIII. The Standard PracticeIV. The Standard GuideV. The Standard ClassificationVI. The Terminology Standard

Textile Standards on ASTM

• ASTM's textile standards provide the specifications and test methods for the physical, mechanical, and chemical properties of textiles, fabrics, and cloths, as well as the natural and artificial fibers that constitute them.

• The textiles covered by these standards are commonly formed by weaving, knitting, or spinning together fibers such as glass fiber strands, wool and other animal fibers, cotton and other plant-derived fibers, yarn, sewing threads, and mohair, to name a few.

• These textile standards help fabric and cloth designers and manufacturers in testing textiles to ensure acceptable characteristics towards proper end-use.

Some standards in apparel sector developed by ASTM

Apparel• ASTM D3135 -

12• ASTM D3780 -

14• ASTM D4155 -

14 • ASTM D6554 /

D6554M - 14• ASTM D6554 /

D6554M - 14• ASTM D7268 -

14• ASTM D7507 -

14

Body Measurement for Apparel Sizing• ASTM D6240

/ D6240M - 12e

• ASTM D6829 - 02(2008)

• ASTM D6458 - 12

Flammability• ASTM D1230

- 10• ASTM D6545

-10• ASTM D1230

- 10• ASTM D4151

- 10• ASTM D4723

- 07e2• ASTM D5238

- 10

Home Furnishings• ASTM D4112

- 02(2008)• ASTM D4113

- 02(2013)• ASTM

D4771 / D4771M - 09

• ASTM D4852 - 88(2009)e1

Labeling• ASTM

D3136 - 14• ASTM

D5489 - 14• ASTM

D5253 - 04(2010)e1

• ASTM D3938 - 13

• ASTM D6322 - 07

UV Protective Fabrics and Clothing• ASTM

D6603 – 12

• ASTM D6544 - 12

ASTM D3135 - 12

STANDARD SPECIFICATION FOR PERFORMANCE OF BONDED, FUSED, AND LAMINATED APPAREL FABRICS • This specification covers requirements for performance properties of bonded, fused, and

laminated apparel fabrics.

• The fabrics shall be classified according to shrinkage limits: Class I; Class II; and Class III.

• Puckering, crack marks, bubbles, blisters, pilling, and color change tests shall be performed to determine its properties in accordance to the specified requirements.

• This specification covers requirements for performance properties of bonded, fused, and laminated apparel fabrics.

ASTM D3780 - 14

STANDARD PERFORMANCE SPECIF ICATION FOR MEN’S AND BOYS’ WOVEN DRESS SUIT FABRICS AND WOVEN SPORTSWEAR JACKET, SLACK, AND TROUSER FABRICS

• This performance specification covers men's and boys' woven dress suit fabrics and woven sportswear jacket, slack, and trouser fabrics composed of any textile fiber or mixture of textile fibers.

• This performance specification is not applicable to woven fabrics used for interlinings.

• These requirements apply to the length and width directions for those properties where fabric direction is pertinent.

ASTM D6240 / D6240M - 12e1 STANDARD TABLES OF BODY MEASUREMENTS FOR MATURE MEN, AGES 35 AND OLDER, SIZES THIRTY-FOUR TO FIFTY-TWO (34 TO 52) SHORT, REGULAR, AND TALL

• The use of the body measurement information will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest.

• The body measurements of mature male figure type, age 35 and older, sizes 34 through 52 in Short, Regular, and Tall. Although these are body measurements, they can be used as a baseline in designing apparel for Mature Men in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.

• The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

ASTM D6829 - 02(2008)

STANDARD TABLES OF BODY MEASUREMENTS FOR JUNIORS, SIZES 0 TO 19• The use of the body measurement information will assist manufacturers in developing patterns

and garments that are consistent with the current anthropometric characteristics of the population of interest.

• Thes body measurements of young adult female junior figure type, sizes 0 to 19. Although these are body measurements, they can be used as a baseline in designing apparel for young women in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.

• The junior body is younger, not fully developed, with a higher waistline than other women's size ranges.

ASTM D6545 - 10

STANDARD TEST METHOD FOR FLAMMABILITY OF TEXTILES USED IN CHILDREN'S SLEEPWEAR• This test method is suitable for evaluating flammability characteristics and laundering

durability of textiles used in the manufacture of children's sleepwear. It is not suitable for evaluating the flammability characteristics of textiles for other product applications or ignition scenarios.

• A textile used in children's sleepwear must be tested in its original state and after 50 laundering and drying cycles to assess the flame resistance of the textile relative to its use life.

• This test method is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.

ASTM D3136 - 14

STANDARD TERMINOLOGY RELATING TO CARE LABELING FOR APPAREL, TEXTILE, HOME FURNISHING, AND LEATHER PRODUCTS

• This standard is a compilation of terminology developed by Subcommittee D13.62 on Labeling that is related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings.

• This terminology provides a uniform language for the disclosure of care instructions on labels that are to be attached to apparel, textile, home furnishing, and leather products according to the Federal Trade Commission’s regulation 16 CFR, Part 423 (See 2.3).

• These terms, definitions and descriptions employ common meanings for the care instructions required to be on textile products sold in the U.S.

Reference

1. www.astm.org

2. www.wikipedia.org/wiki/ASTM_International