Technical colIege\Mosul

30 Weeks

No. of week hours

Department: Building & Construction

Technology Engineering

Th. App. Unit

2 2 4

Third Year Subject: Analysis & Design of reinforced

concrete structures (1)

Objectives:

The student must know the structural analysis & design for different construction

members ( under various loads , stresses , strains , ……etc. ) .

Week Syllabus

1,2,3

Analysis of the Structures:

Loads, Load combinations, Safety provisions of the ACI code, Analysis of

beams & frames, ACI moment coefficients, Arrangement of live load .

4,5

Materials :

Properties of concrete in compression , Modulus of elasticity, Stiffness,

Properties of concrete in tension, Shrinkage & temperature effects ,

Reinforcing steels for concrete .

6, 7, 8, 9, 10

Flexural analysis & design of beams :

Reinforced concrete beam behavior , Analysis of tension- reinforced

rectangular beams , Design of rectangular beams , Design aids , Practical

consideration in design of beams , Rectangular beam with tension &

compression reinforcement , T - beams.

11, 12, 13

Shear and diagonal tension in beams :

Diagonal tension in homogeneous elastic beams , reinforced concrete beams

without shear reinforcement , reinforced concrete beams with web

reinforcement, ACI code provisions for shear design , effect of axial forces ,

deep beams .

14, 15

Analysis & design for torsion :

Torsion in plain concrete members , Torsion in reinforced concrete members

, Torsion plus shear , ACI code provisions for torsion design .

16, 17, 18

Bond , Anchorage , and Development length: Fundamentals of flexural bond

, Bond strength & development length , ACI code provisions for

development of tension reinforcement , Anchorage of tension bars by hooks ,

Development of bars in compression , Bar cutoff & bend points in beams ,

Bar splices .

19, 20,21, 22

Serviceability: Cracking in flexural members , ACI code provisions for crack

control , Control of deflections , Immediate deflections , Deflections due to

long-term loads , ACI code provisions for control of deflections , Deflection

due to shrinkage & temperature changes .

23, 24, 25, 26

Short columns: Axial compression , Lateral ties & spirals , Compression plus

bending of rectangular columns , Strain compatibility analysis and

interaction diagrams , Circular columns , ACI code provisions for column

design , Design aids , Biaxial bending , Load control method .

27, 28, 29, 30

Slender columns: Concentrically loaded columns , compression plus bending

, ACI criteria for non sway versus sway frames , ACI moment magnifier

method for non sway frames , ACI moment magnifier method for sway

frames , Second - order analysis for slenderness effects .