Upload
rick-grigalunas
View
260
Download
0
Embed Size (px)
Citation preview
8Reasons touse Bare Die
ES Components108 Pratts Junction Road
Sterling, MA 01564www.escomponents.com
978-422-7641
Undoubtedly,if you're looking at thisyou are thinking about
using Bare Die.
But, you are wondering...
8
Why?
You want to do it.
You want to do it.You probably need to do it.
You want to do it.You probably need to do it.But you're not sure why.
We're going to share with youeight reasons to useBare Die and explain to you why.
ready?
okay, here we go.
Smaller Size & WeightUsing bare die can allow for reduced board space.
1.
Operating Temperature SizePackage thermal characteristics no longer inhibit the performance
of the die or the environments when they can operate.
2.
RuggednessDirect die attach and wirebond provides protections against high levels of shock and vibrations.
3.
Lighter WeightSmaller designs and higher densities reduce weight and size of your application.
4.
More Efficient PerformanceRemoving extra package interconnect can reduce capacitance and inductance.
5.
ReliabilityThe reduced number of interconnects with die use leads to improved reliability. The typical packaged part
has three connection points per I/O . Compare this with only two for wire bonds.
6.
Electrical PerformanceThe lower inductance and capacitance of bare die is important in analog, RF, and power applications.
faster signal flight time (lower propagation delay) and improved power ground distributions.
7.
Hermetically SealingAir tight sealed packages can be selected that can be injected with inert gasses.
8.
Okay, now take a deep breath.
Let's Recap
8Reasons to use Bare Die
1. Smaller Size & Weight2. Operating Temperature Size3. Ruggedness4. Lighter Weight5. More Efficient Performance6. Reliability7. Electrical Performance8. Hermetically Sealing
That's a lot to think about.
That's a lot to think about.
But here's the good news...
Knowing these 8 reasons to use Bare Diewill put you on a path to success.
Time to look at your competitors.
IC Products In Bare Die Form:
Small-footprint designOptimize design for limited spaceImplement innovative, proprietary packaging solutions
Need more helpwith Bare Die?
AllSupport
It's
About
978-422-7641Call
ES Components
ES Components108 Pratts Junction Road
Sterling, MA 01564www.escomponents.com
Click for more information