642-732 IBM Preparation Materials

http://www.pass4sures.co/642-732.html

The CUWSS Conducting Cisco Unified Wireless Site Survey exam is the exam associated with the CCNP Wireless certification. This exam assesses a candidate's capability to plan and conduct a wireless site survey, to design the RF network and to conduct a post installation assessment to ensure compliancy. Candidates can prepare for this exam by taking the CUWSS Conducting prepare for this exam by taking the CUWSS Conducting Cisco Unified Wireless Site Survey course.


The Conducting Cisco Unified Wireless Site Survey (CUWSS) version 2.0 642-732 exam is a 75-minute test with 45 65 questions that are associated with the Cisco CCNP® Wireless certification. This exam assesses a candidate's ability to plan and conduct a wireless site survey, design the RF network, and conduct a post installation assessment to ensure compliance. The exam installation assessment to ensure compliance. The exam is closed book and no outside reference materials are allowed.


The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice. The exam is closed book and no outside notice. The exam is closed book and no outside reference materials are allowed.


Welcome to the Study/Learn tabs for the 640-732 CUWSS Exam page. This page is designed to help you quickly find what you are looking for by organizing the content according to the exam topics. These resources are meant to supplement your learning experience and exam preparation. They are NOT designed to serve as a complete self-study program, but intended only as a complete self-study program, but intended only as a suggested starting point.


642-732 Online Exam Simulation developed for professionals, by professionals. 642-732 tests containing questions that cover all sides of tested subjects that help our members to be prepared and keep high level of professionalism. The main purpose of 642-732 exam is to provide high quality test that can secure and verify knowledge, give overview of question types and complexity that can be represented on real types and complexity that can be represented on real exam certification. To held our members in same environmental conditions as on real certification exam 642-732 Online Test Simulation provides:


Pass4sure Conducting Cisco Unified Wireless Site Survey V2 products provide you an easiest way to grasp syllabus content and perform excellently in the real exam scenario. Pass4sure’s Cisco 642-732 products are in line with the real exam requirements, hence serve you the best to answer all exam questions and ensure outstanding percentage. Designed into Q&As pattern, Pass4sure’s brain dumps, Study Guides, practice Tests, Pass4sure’s brain dumps, Study Guides, practice Tests, Exam Engine best suit your needs in affordable prices.


642-732 Questions Based on Real Exams ScenariosExperts Verified Questions and AnswersEasy to use Testing Engine & print PDF formatDownload Free 642-732 Demo (Try before Buy)According to recommended syllabus and Objectives100% Pass Guaranteed90 days free updates (testing engine)


Question No : 1

Refer to the exhibit. Which type of interference would the engineer detect on the CiscoSpectrum Expert?

A. BluetoothB. Wi-Max

Answer: D

B. Wi-MaxC. DECT phoneD. microwaveE. analog camera


Question No : 2

An engineer is configuring an AP for a site survey. How should the transmit power beconfigured?

A. Set to maximum power.

Answer: B

A. Set to maximum power.B. Set to one level below full power.C. Enable DTPC.D. Set to one level above the lowest power level.


Question No : 3

A Cisco engineer is troubleshooting a Cisco 1250 series 802.11n access point with amaximum throughput on 2.4 GHz that is limited to 72 Mbps. Why might the AP beoperating in a limited capacity?

Answer: A

operating in a limited capacity?

A. the switch providing PoE supports 802.3afB. the switch providing PoE supports 802.3atC. the 2.4 GHz bandwidth is 20 MHz wideD. the 2.4 GHz is 40 MHz wide


Question No : 4

The customer has an existing 802.11b/g network with Cisco 2500 controllers. Thecustomer would like to migrate to an 802.11a/b/g/n WLAN. Which network infrastructureissue might impact client performance in this proposed controller-based solution?

Answer: B

A. The additional application load placed on servers by 802.11n clients.B. A bottleneck may occur if the access switch port to the AP only supports 100 Mb/s fullduplex.C. The additional load placed on a RADIUS server by 802.1X authentication traffic on thefirst work day of each week.D. The added delay WDS imposes on the client when they roam from one AP to another.


Question No : 5

You have been contacted by a medium sized medical center to do a site survey of theirexisting WLAN. The current network is set up with multiple SSIDs/VLANs to separate voice and data and the networks functioning properly. The medical center would like to addVocera voice badges to the existing VoWLAN. Which two issues need to be consideredduring the site survey? (Choose two.)

A. The additional voice endpoints may increase additional load, which may increase delay

Answer: A,C

A. The additional voice endpoints may increase additional load, which may increase delayin the WLAN and cause voice quality to degrade.B. There will not be any issues due to adding the Vocera voice badges because they arepoint-to-point devices and do not require the infrastructure to communicate.C. Verify the WLAN is multicast enabled for Vocera voice badges.D. To make these devices as efficient as possible, the Vocera voice badges should beplaced on their own unicast SSID/VLAN.E. Verify the WLAN that is being used by the Vocera voice badges is configured in theWLC to use the Gold QoS value.


Question No : 6

When designing and deploying an outdoor mesh network, what is the appropriate RF cell overlap?

A. 10 percentB. 15 percent

Answer: E

B. 15 percentC. 20 percentD. 25 percentE. Application dependent


Question No : 7

Which option lists the non-overlapping channels in the ETSI domain?

A. 1, 6, and 11B. 1, 5, 9, and 13

Answer: A

B. 1, 5, 9, and 13C. 1, 5, 9, 13, and 14D. 1, 5, and 9E. 1, 6, 11, and 14


Question No : 8

When using WCS 7.0 to calibrate a floor in a facility, which two factors are common to thepoint and linear calibration methods? (Choose two.)

A. You must go through each collection point at a speed that isn't too fast to collect toomuch information nor too slow which limits the amount of information collected.B. You must sample both the 802.11a/n and the 802.11b/g/n network separately.

Answer: A,B

B. You must sample both the 802.11a/n and the 802.11b/g/n network separately.C. If one collection point in the linear or point collection method is missed, you have to startat the beginning again.D. Rotating the client is only required during the point collection process because the linearmethod is a slowly moving process.E. You will only need to combine the linear and point collection methods in special spaceslike hallways.


Question No : 9

Which piece of information gathered during a WLAN site survey should be included in thecustomer report?

A. Analysis of server location and applications supported.

Answer: E

A. Analysis of server location and applications supported.B. Analysis of fiber-optic backbone infrastructure.C. Output from Cisco WCS Location Quality Inspector.D. Output from Cisco WCS VoWLAN Voice Readiness Tool.E. Output from Cisco WCS Planning Mode Tool.


Question No : 10

Which two pieces of physical infrastructure information should be included in theinstallation report presented to the customer? (Choose two.)

A. A list of router and switch models, serial numbers and locations.

Answer: D,E

A. A list of router and switch models, serial numbers and locations.B. The total square footage of the customer's facility.C. An analysis of the facility exterior wall and roof construction materials.D. The cable scan results for the entire customer facility.E. An installation inventory of all controllers and APs in the WLAN coverage area.



Education

642-732 IBM Preparation Materials