2016 diploma mechanical titles wingz technologies

WINGZ TECHNOLOGIES Cell:9840004562 www.wingztech.com, www.finalyearproject.co.in [email protected],[email protected]

2016 – 2017 IEEE Software [ .net –Java – NS2 – MATLAB - Android] | VLSI |

Embedded | Power Electronics | Power System | Mechanical | Civil and etc..

Plot No 18, Ground Floor,New Colony, 14th Cross Extension, Elumalai Nagar, Chromepet,

Chennai – 600 044. Mobile: 9840004562. Phone: 044 – 65622200, Tamil Nadu, India.

Website: www.wingztech.com - www.finalyearproject.co.in

[email protected],[email protected]

IEEE / Non IEEE / Real Time Project for B.E / B.Tech /

M.E / M.Tech / BCA / MCA / M.Sc / MBA / Ph.D and etc…

DIPLOMA MECHANICAL

TITLES 2016

MECHANICAL

S.NO PROJECT TITLES

DME 1 Electrical power generation and refrigeration by using waste

heat from ic engine.

Mechanical

DME 2 Fabrication of air engine with d.c air compressor. Mechanical

DME 3 Fabrication of automatic pneumatic disc braking system. Mechanical

DME 4 Advanced electric car with regenerative braking & digital

locking system.

Mechanical

DME 5 Fabrication of twin cylinder electromagnetic vehicle engine. Mechanical

DME 6 Fabrication of turbo charger for two wheelers. Mechanical

DME 7 Intelligent secure and privacy parking through ir sensor. Mechanical

DME 8 Automatic side stands with brake locking system. Mechanical

DME 9 Fabrication of multiple car safety system in bumper. Mechanical

DME 10 Fabrication of eddy current braking system. Mechanical

DME 11 Fabrication of weighing bridge in moving vehicle. Mechanical

DME 12 Generation of electricity using the flow or velocity of vehicle

exhaust gas.

Mechanical


DME 14 Fabrication of variable volume engine. Mechanical

DME 15 Dual power generation system for automobile Mechanical

http://www.wingztech.com/

http://www.finalyearproject.co.in/










DIPLOMA MECHANICAL

TITLES 2016

(thermoelectric + exhaust gas power generation).

DME 16 Fabrication of tire pressure inflation system. Mechanical

DME 17 Fabrication of three axis pneumatic modern tractor. Mechanical

DME 18 Fabrication of safety mechanism for vehicle (clutch lock). Mechanical

DME 19 Integrated drunk and drive prevention system. Mechanical

DME 20 Fabrication of anti theft steering system. Mechanical

DME 21 Automatic electro-magnetic gear transmission for two

wheelers.

Mechanical

DME 22 Automatic clutch and brake system for four wheelers. Mechanical

DME 23 Experimental investigation of an air conditioning system

drive by LPG engine.

Mechanical

DME 24 Fabrication of electro magnetic suspension. Mechanical

DME 25 Emission tester (co2) for automobile. Mechanical

DME 26 Automatic head light dim and bright controller with engine

overheating alarm

Mechanical

DME 27 Efficient car parking system for four wheelers. Mechanical

DME 28 Fabrication of hydrogen engine with load tests Mechanical

DME 29 Emission control in two stroke petrol engine by using

multiple sparks.

Mechanical

DME 30 Sterling engine with parabolic collector (model).

DME 31 Automatic vehicle locking system by without helmet. Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 32 Fabrication of multi nut (wheel) tighter and looser. Mechanical

DME 33 Fabrication of three axis pneumatic modern trailer. Mechanical

DME 34 GPS based automatic vehicle accident information system. Mechanical

DME 35 Fabrication of dual brake single liver system for two

wheelers.

Mechanical

DME 36 Fabrication of hydraulic break show riveting machine.. Mechanical

DME 37 Quick lifting jack with gear arrangement. Mechanical

DME 38 Air compressor using crank and slotted link mechanism Mechanical

DME 39 GPS based automatic vehicle accident information system Mechanical

DME 40 Elimination of chain drive in by-cycle Mechanical


wheelers

Mechanical

DME 42 Regenerative braking using pneumatic interface Mechanical

DME 43 Automatic break failure indicator and engine over heating

alarm

Mechanical

DME 44 Fabrication of digital gear level indicator for four wheeler Mechanical

DME 45 Fabrication of hydraulic break show riveting machine Mechanical

DME 46 Fabrication of shock observer power generation system. Mechanical

DME 47 Fabrication of pneumatic disc braking system (PDBS) Mechanical

DME 48 Fabrication automatic lawn mover. Mechanical

DME 49 Quick lifting jack with gear arrangement Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 50 Fabrication of pedal operated cell phone charger Mechanical

DME 51 Fabrication of automatic reserve indication system Mechanical

DME 52 Fabrication of shock observer power generation system Mechanical

DME 53 Fabrication of nitrogen air vehicle with load test Mechanical

DME 54 Fabrication automatic lawn mover Mechanical

DME 55 Fabrication of automatic steering control system for

automobile

Mechanical

DME 56 Automatic visitor guided with material handling vehicle Mechanical

DME 57 Fabrication of solar hybrid car Mechanical

DME 58 Highways high speed indication and automatic pneumatic

braking system

Mechanical

DME 59 Automatic pneumatic vulcanizing machine Mechanical

DME 60 GPS based vehicle root tracking system Mechanical

DME 61 Automatic rain operated wiper and head light dim/bright

controller

Mechanical

DME 62 Fabrication of automatic railway gate controller Mechanical

DME 63 Smart shock absorber for automobile Mechanical

DME 64 Fabrication of digital fuel level indicator Mechanical

DME 65 Elimination of carbon particles from exhaust gas

DME 66 Remote controlled scrap collecting vehicle Mechanical

DME 67 Fabrication of wireless tire pressure monitoring system Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 68 Efficiency increasing system by using preheating method Mechanical

DME 69 Fabrication of electronic ignition system Mechanical

DME 70 Remote controlled tilting handicapped wheel chair Mechanical

DME 71 Fabrication of adaptive breaking system Mechanical

DME 72 Fabrication of king star electrical vehicle Mechanical

DME 73 Fabrication of automatic magnetic accident preventer for

train

Mechanical

DME 74 Shock absorber test rig using cam and sensors Mechanical

DME 75 Fabrication of solar race car Mechanical

DME 76 Fabrication of electric two wheeler Mechanical

DME 77 Railways accident avoiding system (level crossing and fire

alarm)

Mechanical

DME 78 Fabrication of two engine synchronization for four wheeler Mechanical

DME 79 Fabrication of oil pump and water pump for jeep and tractor Mechanical


automobile

Mechanical


braking system

Mechanical



DME 84 Efficiency increasing system by using preheating method Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 85 Fabrication of automatic magnetic accident preventer for

train

Mechanical

DME 86 Fabrication of exhaust gas heat recovery power generation

system

Mechanical

DME 87 Water fuel engine with power generation Mechanical

DME 88 Auto indexing gear cutting attachment for pneumatic shaping

machine

Mechanical

DME 89 Automatic bar feeding mechanism for hack saw machine Mechanical

DME 90 Fabrication of hydraulic tail stock Mechanical

DME 91 Fabrication of automatic electro hydraulic jack Mechanical

DME 92 Fabrication of hydraulic pallet truck Mechanical

DME 93 Pneumatic automatic sheet cutting machine Mechanical

DME 94 Automatic pneumatic reciprocating grinding machine Mechanical

DME 95 Fabrication of double axis pneumatic jcb equipment Mechanical

DME 96 Fabrication of pneumatic 4-axis jcb equipment Mechanical

DME 97 Automatic conveyor based stamping machine Mechanical

DME 98 Fabrication of over head crane Mechanical

DME 99 Automatic paint marking machine for industries Mechanical

DME 100 Pneumatic cutting and grinding machine Mechanical

DME 101 D & f of automatic pneumatic ramming machine Mechanical

DME 102 Fabrication of hydraulic trolley type jack Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 103 Fabrication of automatic multi-purpose press Mechanical

DME 104 D & f of pneumatic injection moulding machine Mechanical

DME 105 Pneumatic operated intelligent braking system (ibs) Mechanical

DME 106 Pneumatic operated conveyor automation Mechanical

DME 107 Fabrication of pick and place robot Mechanical

DME 108 Automated guided vehicle (agv) Mechanical

DME 109 Smart tanker robot for security operations Mechanical

DME 110 Remote controlled paint spraying robot Mechanical

DME 111 Remote controlled bomb detecting robot Mechanical

DME 112 Automatic motorized arc welding robot Mechanical

DME 113 Automatic accident information system Mechanical

DME 114 Design and fabrication of heat exchanger Mechanical

DME 115 Analysis of temperature distribution in radiators used in

automobiles

Mechanical

DME 116 Modeling and analysis of single plate clutch Mechanical

DME 117 Modeling and analysis of automobile drum brake

return spring.

Mechanical

DME 118 Composite material reinforcement of the leaf spring for the

material glass carbon composite.

Mechanical

DME 119 Developments of a hot forging die life prediction model. Mechanical

DME 120 Computer simulations of natural convection of single phase Mechanical












DIPLOMA MECHANICAL

TITLES 2016

nano fluids in simple enclosures

DME 121 Experimental investigation of the discharge valve dynamics

in a reciprocating compressor for trans-critical co2

refrigeration cycle.

Mechanical

DME 122 Thermal conductivity and latent heat thermal energy storage

characteristics of paraffin/expanded graphite composite as

phase change material.

Mechanical

DME 123 Design of a car air conditioning system based on an

absorption refrigeration cycle using energy from exhaust gas

of an internal combustion engine

Mechanical

DME 124 A compact dynamic model for household vapor compression

refrigerated systems

Mechanical

DME 125 Stall characteristics and tip clearance effects in forward

swept axial compressor rotors

Mechanical

DME 126 Effects of axial non-uniform tip clearances on aerodynamic

performance of a transonic axial compressor

Mechanical

DME 127 Performance and internal flow of sirocco fan using contra-

rotating rotors

Mechanical

DME 128 Natural convective heat transfer from narrow vertical plates Mechanical

DME 129 Effect of edge conditions on natural convective heat transfer

from narrow vertical plates

Mechanical

DME 130 Force-fed micro channels for high flux cooling application. Mechanical

DME 131 Thermal-hydraulic analysis of a 600 mw supercritical cfb

boiler with low mass flux.

Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 132 Composite material analysis on a car door by the material e-

glass epoxy & s-2 glass epoxy.

Mechanical

DME 133 Design evaluation of medical wheel chair Mechanical

DME 134 Coupled field analysis of a chimney used in cement industry Mechanical

DME 135 Stress analysis of functionally graded discs under mechanical

and thermal loads

Mechanical

DME 136 Mono composite leaf spring for light weight vehicle-design Mechanical

DME 137 Modeling and analysis of connecting rod of four stroke

single cylinder engine for optimization of cost & material

Mechanical

DME 138 Design evaluation of a heavy vehicle chassis by using

materials e- glass epoxy & s-2 glass epoxy.

Mechanical

DME 139 Connecting rod optimization for weight and cost reduction Mechanical

DME 140 Non linear dynamic analysis of crankshaft used in two

wheeler

Mechanical

DME 141 Fabrication of helical spring load testing machine Mechanical

DME 142 Fabrication of letter punching machine Mechanical

DME 143 Fabrication of hydraulic u-type, v-type, l-type angle bending

machine

Mechanical

DME 144 Fabrication of dual fuel vehicle (gas and petrol bike) Mechanical

DME 145 Fabrication of solar parabolic trough collector with auto

tracking

Mechanical

DME 146 Advanced collision avoidance solar powered robot car with Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 147 Automatic charger – seek for sun light and charges when the

battery goes down

Mechanical

DME 148 Experimental investigation solar pond integrated with pcm

storage

Mechanical

DME 149 Electrical power generation system by using gasifier Mechanical

DME 150 Fabrication of buggy with solar hybrid vehicle Mechanical

DME 151 Sterling engine with solar parabolic collector Mechanical

DME 152 Intelligent solar oil skimmer robot Mechanical

DME 153 Fabrication of solar refrigeration system Mechanical

DME 154 Artificial intelligent based solar vehicle Mechanical

DME 155 Fabrication of hybrid human power generation with

overcharge indication

Mechanical

DME 156 Water fuel engine with power generation Mechanical

DME 157 Solar powered vapour absorption ice maker Mechanical

DME 158 Solar panel duel axis tracking system Mechanical

DME 159 Solar powered remote controlled aircraft Mechanical

DME 160 Solar powered unaided guided vehicle (solar ugv) Mechanical

DME 161 Solar powered automatic temperature controller with cooling

system

Mechanical

DME 162 SMS controlled solar vehicle for industrial application Mechanical

DME 163 Fabrication of solar powered thermo-electric refrigerator Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 164 Fabrication of solar seed dryer Mechanical

DME 165 Fabrication of solar car Mechanical

DME 166 Fabrication of solar wheel chair for physically disabled Mechanical

DME 167 Solar sterling engine Mechanical

DME 168 Solar water cooler cum room cooling system Mechanical

DME 169 Electrical power generation system using railway track Mechanical

DME 170 SMS based solar pick and place robot Mechanical

DME 171 Solar powered path finding vehicle Mechanical

DME 172 Solar intelligent vehicle (car model) Mechanical

DME 173 Solar powered automatic fire fighting robot Mechanical

DME 174 Fabrication of pelton wheel turbine Mechanical

DME 175 Fabrication of solar powered remote controlled weapon

system

Mechanical

DME 176 Fabrication of solar air cooler with heater Mechanical

DME 177 Solar powered remote controlled bomb detecting robot Mechanical

DME 178 Fabrication of solar automobile fridge Mechanical

DME 179 Fabrication of pc based solar car Mechanical


DME 181 Solar automated guided vehicle (solar energy) Mechanical

DME 182 Fabrication of solar air cooler Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 183 Fabrication of solar irrigation system Mechanical

DME 184 Solar automobile air conditioner Mechanical

DME 185 Remote controlled solar powered handicapped tilting wheel

chair

Mechanical

DME 186 Fabrication of solar railway track crack detecting vehicle Mechanical

DME 187 Electrical power generation using speed breaker Mechanical

DME 188 Banana fiber reinforcement tiles Mechanical

DME 189 Fabrication of decorticator seed kernel extractor Mechanical

DME 190 Fabrication of maize de-husker Mechanical

DME 191 Solar powered agricultural water pumping system with auto

tracking

Mechanical

DME 192 Fabrication of multi-agri cutter Mechanical

DME 193 Automatic packing control machine Mechanical

DME 194 Automatic vegetable (or) lemon cutting machine Mechanical

DME 195 Fabrication of hydraulic 3 axis modern trailer Mechanical

DME 196 Fabrication of three axis electrical crane Mechanical

DME 197 Fabrication of seeds sprayer Mechanical

DME 198 Fabrication of groundnut harvester Mechanical

DME 199 Automatic grass cutting robot Mechanical

DME 200 Finger print based anti theft steering system Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 201 Automatic reverse locking system using differential unit Mechanical

DME 202 Magnetic and non magnetic material sorting machine Mechanical

DME 203 Intelligent secure and privacy parking through ir sensor Mechanical

DME 204 Automatic pvc pipe feeding and cutting machine Mechanical

DME 205 Hybrid power consumption in train with pneumatic bumper Mechanical

DME 206 Fabrication of pneumatic belt conveyor Mechanical

DME 207 Fabrication of pneumatic bending/bend removing machine Mechanical

DME 208 Fabrication of hydraulic pipe bending machine Mechanical

DME 209 Highways high speed sensing and automatic pneumatic

braking system

Mechanical

DME 210 Fabrication of automatic pneumatic chapatti making machine Mechanical

DME 211 Fabrication of pneumatic auto gear changer Mechanical

DME 212 Automatic sensor operated pneumatic braking system Mechanical

DME 213 Automatic distance measurement and braking system by

using ultrasonic waves

Mechanical

DME 214 Fabrication of pneumatic cargo weight lifter Mechanical

DME 215 Automatic pneumatic double axis welding machine Mechanical

DME 216 Sensor operated automatic ramming machine Mechanical

DME 217 Pneumatic auto indexing drilling machine Mechanical

DME 218 Automatic pneumatic paper cup folding machine Mechanical












DIPLOMA MECHANICAL

TITLES 2016


braking system

Mechanical

DME 220 D & f of pneumatic injection moulding machine Mechanical

DME 221 Remote controlled car/bus pneumatic door open/close

mechanism

Mechanical

DME 222 Fabrication of pneumatic 4-axis jcb equipment Mechanical

DME 223 Accident avoiding system for heavy cutting machine Mechanical

DME 224 Fabrication of pneumatic automatic sheet cutting machine Mechanical

DME 225 Cell phone controlled pneumatic 4-axis material handling

equipment

Mechanical

DME 226 Pneumatic operated emergency braking system (EBS) Mechanical

DME 227 Fabrication of smart shock absorber Mechanical

DME 228 Compressed air production using vehicle suspensor Mechanical

DME 229 Automatic bar feeding mechanism for hack saw machine Mechanical

DME 230 Automatic electro-hydraulic braking system for four wheeler Mechanical

DME 231 Fabrication of cnc pneumatic punching machine Mechanical

DME 232 Fabrication of automatic pneumatic jack for four wheeler Mechanical

DME 233 Refrigeration using waste heats in car Mechanical

DME 234 Experimental investigation solar pond integrated with pcm

storage

Mechanical

DME 235 Fabrication of solar fridge. Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 236 Design & fabrication of chemical processing plant. Mechanical

DME 237 Fabrication of solar water disalation (purification) by using

parabolic method.

Mechanical

DME 238 Fabrication of solar air cooler cum heater. Mechanical

DME 239 Remote controlled boiler flame adjustment system. Mechanical

DME 240 Solar water purification by using thermal method. Mechanical

DME 241 Water cooler cum water heater by using refrigeration system Mechanical

DME 242 Three in one air conditioner Mechanical

DME 243 Automatic temperature controller with cooling system Mechanical

DME 244 Water cooler cum air conditioner Mechanical

DME 245 Fabrication of thermo-electric refrigerator Mechanical

DME 246 Fabrication of gear cutting attachment in lathe Mechanical

DME 247 Automatic cleaning board by using rack and pinion Mechanical

DME 248 Pneumatic six axis material handling robot Mechanical

DME 249 Shock observer power generation system Mechanical

DME 250 Fabrication of abrasive jet machine Mechanical

DME 251 Loading and unloading in automated CNC lathe Mechanical

DME 252 Design & fabrication of telescopic railway gate Mechanical

DME 253 Energy conservation in steam systems Mechanical

DME 254 Pneumatic hacksaw with auto feeding mechanism Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 255 Fabrication of fork lift Mechanical

DME 256 Fabrication of automatic multi point grease gun Mechanical

DME 257 Fabrication of mini vertical lathe Mechanical

DME 258 Fabrication of eccentric shear cutting machine Mechanical

DME 259 Pneumatic three axis modern trailer Mechanical

DME 260 Fabrication of furnace using infrared lamp Mechanical

DME 261 Fabrication of double axis pneumatic jcb Mechanical

DME 262 Fully automated hydraulic crane Mechanical

DME 263 Fabrication of ground driller Mechanical

DME 264 D & f of automatic coil winding machine Mechanical

DME 265 Automatic pneumatic grinding machine Mechanical

DME 266 Robot controlled vacuum cleaner Mechanical

DME 267 Fabrication of multi drill holder Mechanical

DME 268 Fabrication of six stroke engine (model) Mechanical

DME 269 Intelligent oil skimmer robot Mechanical

DME 270 Automated guided vehicle (agv) Mechanical

DME 271 Fabrication of solar race car Mechanical

DME 272 Fabrication of wind energy vehicle Mechanical

DME 273 Fabrication of air engine Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 274 Fabrication of multi-fuel engine Mechanical

DME 275 Fabrication of hybrid vehicle Mechanical

DME 276 Fabrication of pneumatic auto gear changer Mechanical

DME 277 Auto indexing gear cutting attachment for pneumatic shaping

machine.

Mechanical

DME 278 Over speed indication and automatic accident avoiding

system for four wheeler.

Mechanical

DME 279 Mechanical

DME 280 Electrical power generation and refrigeration by using waste

heat from ic engine.

Mechanical

DME 281 Fabrication of air engine with d.c air compressor. Mechanical

DME 282 Fabrication of automatic pneumatic disc braking system. Mechanical

DME 283 Advanced electric car with regenerative braking & digital

locking system.

Mechanical

DME 284 Fabrication of twin cylinder electromagnetic vehicle engine. Mechanical

DME 285 Fabrication of turbo charger for two wheelers. Mechanical


DME 287 Automatic side stands with brake locking system. Mechanical

DME 288 Fabrication of multiple car safety system in bumper. Mechanical

DME 289 Fabrication of eddy current braking system. Mechanical

DME 290 Fabrication of weighing bridge in moving vehicle. Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 291 Generation of electricity using the flow or velocity of vehicle

exhaust gas.

Mechanical


DME 293 Fabrication of variable volume engine. Mechanical

DME 294 Dual power generation system for automobile

(thermoelectric + exhaust gas power generation).

Mechanical

DME 295 Fabrication of tyre pressure inflation system. Mechanical

DME 296 Fabrication of three axis pneumatic modern tractor. Mechanical

DME 297 Fabrication of safety mechanism for vehicle (clutch lock).

DME 298 Integrated drunk and drive prevention system. Mechanical

DME 299 Fabrication of anti theft steering system. Mechanical

DME 300 Automatic electro-magnetic gear transmission for two

wheelers.

Mechanical

DME 301 Automatic clutch and brake system for four wheelers. Mechanical

DME 302 Experimental investigation of an air conditioning system

drive by LPG engine.

Mechanical

DME 303 Fabrication of electro magnetic suspension. Mechanical

DME 304 Emission tester (co2) for automobile. Mechanical

DME 305 Automatic head light dim and bright controller with engine

overheating alarm

Mechanical

DME 306 Efficient car parking system for four wheelers. Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 307 Fabrication of hydrogen engine with load tests Mechanical

DME 308 Emission control in two stroke petrol engine by using

multiple sparks.

Mechanical

DME 309 Sterling engine with parabolic collector (model). Mechanical

DME 310 Automatic vehicle locking system by without helmet. Mechanical

DME 311 Fabrication of multi nut (wheel) tighter and looser. Mechanical

DME 312 Fabrication of three axis pneumatic modern trailer. Mechanical

DME 313 GPS based automatic vehicle accident information system. Mechanical


wheelers.

Mechanical

DME 315 Fabrication of hydraulic break show riveting machine.. Mechanical

DME 316 Quick lifting jack with gear arrangement. Mechanical

DME 317 Air compressor using crank and slotted link mechanism Mechanical

DME 318 GPS based automatic vehicle accident information system Mechanical

DME 319 Elimination of chain drive in by-cycle Mechanical


wheelers

Mechanical

DME 321 Regenerative braking using pneumatic interface Mechanical

DME 322 Automatic break failure indicator and engine over heating

alarm

Mechanical

DME 323 Fabrication of digital gear level indicator for four wheeler Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 324 Fabrication of hydraulic break show riveting machine Mechanical

DME 325 Fabrication of shock observer power generation system. Mechanical

DME 326 Fabrication of pneumatic disc braking system (pdbs) Mechanical

DME 327 Fabrication automatic lawn mover. Mechanical

DME 328 Quick lifting jack with gear arrangement Mechanical

DME 329 Fabrication of pedal operated cell phone charger Mechanical

DME 330 Fabrication of automatic reserve indication system Mechanical

DME 331 Fabrication of shock observer power generation system

DME 332 Fabrication of nitrogen air vehicle with load test Mechanical

DME 333 Fabrication automatic lawn mover Mechanical


automobile

Mechanical

DME 335 Automatic visitor guided with material handling vehicle Mechanical



braking system

Mechanical


DME 339 GPS based vehicle root tracking system Mechanical

DME 340 Automatic rain operated wiper and head light dim/bright

controller

Mechanical

DME 341 Fabrication of automatic railway gate controller Mechanical












DIPLOMA MECHANICAL

TITLES 2016

DME 342 Smart shock absorber for automobile Mechanical

DME 343 Fabrication of digital fuel level indicator Mechanical

DME 344 Elimination of carbon particles from exhaust gas Mechanical


DME 346 Fabrication of wireless tyre pressure monitoring system Mechanical



Education

2016 diploma mechanical titles wingz technologies