South Central Kansas WIRED Initiative Composites Kansas Final Report
2
TableofContentsComposites Kansas Co-Chairs Letter: Mark Conway and Mickey Fornaro Dean ............................... 3
LWIB Executive Directors Letter: Keith Lawing and Robert Dalke .................................................... 4
Introduction ................................................................................................................................................... 6
Summary of Composites Kansas WIRED Initiative ............................................................................. 8
Initiative 1.1 Wichita Area Technical College (WATC) .................................................................... 9
Initiative 1.2 Coordinate and Leverage Educational and Workforce Development Resources ........ 12
Initiative 1.3 Broaden Participation in Engineering, Youth Camps .................................................. 17
Initiative 1.4 Project Lead the Way ................................................................................................. 21
Initiative 1.5 Short Courses in Composites & Graduate Certificate ................................................. 25
Initiative 1.6 Kansas Career Pipeline ................................................................................................ 28
Initiative 2.1 Bio-Composite Research Initiative .............................................................................. 30
Initiative 2.2-3 Kansas Entrepreneurial Initiative ............................................................................. 33
Initiative 2.4 Small Business Support ............................................................................................... 37
Initiative 2.5 National Institute for Aviation Research (NIAR) ........................................................ 40
Initiative 3.1 Composites Advisory Board (CAB) ............................................................................ 44
Initiative 3.2 Regional Composite and Advanced Materials Development Strategies & Stakeholder Communication ................................................................................................................................... 46
Initiative 3.3 Advanced Material & Polymer Market Research ........................................................ 50
Composites Kansas WIRED Selected Resource Directory .................................................................... 52
Evaluation of Generation III, Composites Kansas WIRED .................................................................... 53
Composites Kansas WIRED Leadership Team .......................................................................................... 55
Composites Kansas WIRED Implementation Teams ................................................................................. 56
Strategy 1, Education and Training Implementation Team ................................................................ 56
Strategy 2, Research & Development and Entrepreneurship Implementation Team.......................... 56
Strategy 3, Regional Economic Growth Implementation Team ......................................................... 57
Governance ................................................................................................................................................. 58
Appendix 1. Blueprint for American Prosperity, Innovation in ARRA Implementation ................... 59
South Cen
Composi An investmCompositthe knowlaircraft deand corroindustry s The Comp
TgrththexRcoacco
The southas a key togenerationmaterials economic The succeindividualacross thethat we ca This docuKansas gocentral Ka
tral Kansas W
itesKansas
ment in knowtes Kansas Wledge and innesigns and envsion resistanc
sectors.
posites Kansa
The goal of therowth and trahe aircraft andhe region. Foxpanding edu
Resources fromomposite andccelerates in tomposite tech
h central Kanso American cn WIRED funeconomic tra
c development
esses of the inlly they have
e landscape ofan transform a
ument is a cataoals. We can ansas to comp
IRED Initiative
Co‐ChairsL
ledge pays thIRED goals a
novations beinvisioned how
ce, could be m
as WIRED go
e Compositesansformation bd medical devocus will be plucation and tram the Compod advanced mathe aviation inhnology to oth
sas region hascompetitivenending opportuansformation wt systems.
nitiative are chimpacted hun
f the 10-couna region by w
alog of the mclearly see th
pete and win i
etter:Mark
e best interesand strategiesng generated i
w these new himore fully util
oal was establ
s Kansas WIRby fostering i
vice industrieslaced on increaining in sciesites Kansas Waterials industndustry, and eher commerci
s benefited froess in the globunity in July 2was designed
hronicled in tndreds of orgty region. M
working collab
many programshat the Compin the global
3
Conwayand
st (Benjamin F were first bein response toigh strength-tlized within th
lished to supp
RED Initiativeinnovation ans and other teeasing the comnce, technoloWIRED Initiatry as the useencourage miial application
om the new febal economy a2007. The 10d to integrate e
this grant sumanizations anore importantboratively acr
s and ventureosites Kansaseconomy.
dMickeyFo
Franklin). Ineing visualizeo a new generto-weight mathe region and
port the region
e is to accelernd talent deveechnology drivmpetency of w
ogy, engineeriative will sup
e of compositeigration of a nns in the regio
federal emphaand was awar
0-county regioeducation, res
mmary. The snd enterprises t, taken togethross jurisdicti
es that operatis WIRED effo
Composites
ornaroDean
n the spring ofd, regional leration of comterials, with ed migrated to
nal materials
rate economiclopment criticven employerworkforce aning and math
pport the emeres dramaticallnew generatioon.
asis on regionrded $5 millioonal compositsearch, workf
successes are and thousandher, they havon and discip
ionalized the forts have pos
Kansas Final R
n
f 2007 when teaders focused
mposites-intensexcellent fatigadditional
transformatio
c cal to rs in
nd . rging ly on of
nal competitivon in the thirdtes and advanforce and
many, and ds of individue demonstrate
plines.
Composites itioned south
Report
the d on sive gue
on.
veness d nced
uals ed
h
South Central Kansas WIRED Initiative Composites Kansas Final Report
4
LWIBExecutiveDirectorsLetter:KeithLawingandRobertDalke Any time an agency or organization receives a grant the hope is to see lasting and sustainable impacts well beyond the life of the funds. While it is too early to fully understand the long term impact of the Kansas Composites WIRED Initiative, we are confident the results and outcomes will become increasingly apparent in the near future. The United States Department of Labor’s underlying purpose of the WIRED grants was to position the public workforce system to support transformation of a regional economy by aligning employment and training programs to economic development strategies and leveraging resources through relationships based on collaboration and cooperation. If one takes the time to read this report and learn about the accomplishments of the Kansas Composites WIRED Initiative, it will become clear we not only met the purpose of WIRED, but created a number of sustainable outcomes that will benefit the South Central Kansas Economy now and well into the future. The Kansas Composites WIRED Initiative would not have been possible without the support of a large number of partners. It was an honor for both of us to be part of this dynamic team. The project director, Debbie Franklin, brought a level of energy, expertise and dedication to the many tasks in her portfolio, earning the confidence and respect of the WIRED funded partners, the WIRED Leadership Team and officials from the United States Department of Labor. Along with Debbie, the members of the WIRED Leadership Team deserve a great deal of credit. This group of business executives, economic development officials and education leaders took their governance role very seriously. Led by Mark Conway and Mickey Fornaro Dean, the Leadership Team focused on the investments being made with WIRED funds to make sure they would have a meaningful impact in economic development efforts, meet the needs of existing and emerging companies in the areas of composites, and prepare skilled workers that will be required for this region to become a globally recognized center of excellence in the use of composite materials. It will be decisions made by the Leadership Team that will sustain the investments from WIRED for years to come. As the Executive Directors for the LWIB partners of WIRED, we take special pride in the outcomes of Strategy 1.2. Through these resources 20 emergent workers were trained in composites. In addition, more than $740,000 was invested with 16 companies to up-skill 1,280 incumbent workers. The total value of incumbent worker training supported by WIRED funds exceeded $4 million. An outcome of WIRED we know will be sustained is the relationship between our respective Boards. Through WIRED we demonstrated how LWIBS could collaborate and leverage resources when serving a common labor shed and implement targeted industry and sector strategies. There were many moving parts to the Kansas Composite WIRED Initiative from skills training, curriculum development, capacity expansion, small business development, market research and coordination of economic development strategies, with each part implemented by a diverse group of talented individuals and well run organizations. All of this activity was aligned in a spirit of cooperation that existed pre-WIRED, but has truly been augmented over the past three years. So many people deserve credit and Joe Yager, Caleb Asher, Sheree
South Cen
Utash, ZuVicki Ger Most of thComposittheir contrLinda SorRae AnneNancy WiLovingfos Finally wmakes our
Keith LawWorkforc
tral Kansas W
ulma Toro-Rarbino set the s
he names assotes WIRED wributions. Thrrell, Christy De Davis, Blakeilliams, Kit Dss.
e want to thanr jobs easier a
wing, Executice Alliance of
IRED Initiative
amos, Andy Sstage, from th
ociated with twanes. We wohank you EarnDoherty, Paue Flanders, A
Donahue, Jack
nk our Board and projects l
ve Director f South Centra
olter, John Tohe beginning o
this project would like to mnie Lehman, L
ul Wooley, ToAmanda Duncak McLennan,
members andike WIRED p
al Kansas
5
omblin, Tim Pof WIRED, th
will be forgottemention just a Lori Usher, Com Aldag, Anan, Marty ShaShelly Jones,
d staff for thepossible.
RoKa
Pett, Marcia Shat made this
en long beforfew and expr
Chad Pettera, Dnne Wenger, Pawver, Shelle, Barbara Tur
eir ongoing su
obert Dalke, Eansas Workfo
Composites
Stevens, Joe Clevel of colla
re the impact oress my/our aDeb ScheiblePatrick Frenchey Warren, Wrner, Tonya C
upport and de
Executive DirorceONE
Kansas Final R
Carrithers andaboration pos
of Kansas appreciation fer, Sherry Gegh, Duane Sm
Wendy VeatchClark and Roy
dication that
rector
Report
d sible.
for gen, ith,
h, yal
South Cen
Introdu
The UniteInnovatiocareers. Weconomieassets fromstrategy. The goal ogrowth anmedical dincreasingengineerinadvanced device indtechnolog
tral Kansas W
uction
ed States Depns in Regiona
WIRED was pes through intem private, noThe term of t
of the South Cnd transformadevice industrg the competeng and math. materials ind
dustries, and egy to other com
IRED Initiative
artment of Laal Economic Dpart of a natioegration of edn-profit, and the grant was
Central Kansaation by fosteries and other
ency of workf Resources fr
dustry, as the encouraged mmmercial app
abor awardedDevelopmentonal strategy tducation, worgovernment sfrom July 20
as WIRED Inring innovatiotechnology d
force and exprom Composiuse of compo
migration of aplications in th
6
d South Centrat (WIRED) grto enhance trarkforce and ecsources were007 through Ju
nitiative, Comon and talent driven employanding educaites Kansas suosites dramati new generatihe region.
al Kansas a $rant to supporansformation conomic develeveraged to une 2010.
mposites Kansdevelopment
yers in the regation and trainupported the eically acceleraion of compo
Composites
5 million Wort high skilled
n and innovatielopment systimplement th
sas, was to acct critical to thegion. Focus wning in sciencemerging comated in the av
osite and adva
Kansas Final R
orkforce d and high waion in regionatems. Regionhe transforma
celerate econe aircraft and was placed once, technologymposite and viation and meanced materia
Report
age al nal ational
nomic
n y,
edical als
South Central Kansas WIRED Initiative Composites Kansas Final Report
7
To maintain a competitive advantage and further develop composite expertise in South Central Kansas, it was critical that the region expand workforce training from students to entry level workers and experienced engineers. In developing a premier workforce of skilled composite and advanced materials technicians who can serve a variety of industries, South Central Kansas will continue to diversify the regional economy while strengthening its manufacturing base and providing for future growth and stability. The Composites Kansas WIRED Region covered 10 counties in south central Kansas encompassing the regional labor market: Butler, Cowley, Harper, Harvey, Kingman, Marion, McPherson, Reno, Sedgwick, Sumner. The initiative was collaboratively administered by the Workforce Alliance of South Central Kansas, Kansas WorkforceONE and Kansas Department of Commerce. Key areas addressed in the Composites Kansas WIRED Initiative included the following:
EDUCATION AND TRAINING
o Wichita Area Technical College (WATC) Develop composite curricula and instructor training Composites training laboratory
o Workforce Alliance of South Central Kansas and Kansas WorkforceONE Incumbent worker training programs Emergent worker training programs
o Wichita State University (WSU), College of Engineering (COE) Project Lead the Way Summer camps for youth to explore careers in science occupations Course development and scholarships for composites short course training
o Kansas Career Pipeline/K-12, video vignettes highlighting composites careers RESEARCH AND DEVELOPMENT & ENTREPRENEURSHIP
o Via Christi Health Systems, Orthopaedic Research Center and CiBOR o WSU, Center for Entrepreneurship
FastTrac© NewVentureTM and GrowthVentureTM and Practical Entrepreneur Training Tools
Business plan competition for high schools o WSU, Kansas Small Business Development Center (KSBDC) o WSU, National Institute for Aviation Research (NIAR)
o Nondestructive testing/inspection curricula o Laboratory for nondestructive testing/inspection training o Training support for manufacturing and maintenance of advanced materials
REGIONAL ECONOMIC GROWTH o Business and industry, Composites Advisory Board o Collaboration among the economic development agencies in the region o Greater Wichita Economic Development Coalition (GWEDC) research
South Central Kansas WIRED Initiative Composites Kansas Final Report
8
SummaryofCompositesKansasWIREDInitiative Talent Driving Prosperity “Talent Driving Prosperity” has been the WIRED tag line over the last three years, and talented regional leaders have been steering the south central Kansas regional economy towards accelerated materials and process transformation, thereby positioning our region to compete and win in the global economy. Through the vision of the Composite Kansas Leadership Team led by Mark Conway and Mickey Fornaro-Dean, the initiative has:
• Updated educational and training curricula informed by research and development in collaboration with business and industry
• Supported applied research in aviation and health care • Encouraged entrepreneurship • Provided research tools for the region’s economic development community.
To position our region for a vital and prosperous economic recovery, the Composites Kansas WIRED Initiative empowered numerous agencies and individuals to align their resources and expand capacity. Among the many outcomes of the grant are:
• Training - nearly 2,900 individuals received training in advanced materials processes and techniques.
• Curricula - more than 50 curricula were developed in the areas of composites and advanced materials processes and repairs, entrepreneurship and business support, and more than 300 educators have been prepared for instructing these topics.
• Laboratory facilities – two new training laboratories have been equipped for the National Center for Aviation Training – a composites laboratory and a non-destructive testing laboratory.
• Workforce pipeline – career exploration education and training in science, technology, engineering and math have impacted and empowered more than 200 youth, many of whom are from underrepresented groups. In addition, nearly 250 technical professionals, who were trained in the pre-composite materials era, have had opportunities to upgrade their skills in composites and advanced materials processes.
• Economic diversification – Center of Innovation for Biomaterials in Orthopaedic Research (CiBOR) leverages the experience in advanced composites to grow a new medical device industry cluster.
• Collaboration – more than 100 regional partners have regularly convened across geographical, jurisdictional, and institutional boundaries to connect and work in concert with unity of purpose toward the Composites Kansas WIRED goals.
WIRED has spawned many new and creative training, education, support and outreach programs and activities within south central Kansas. Our challenge is not only to sustain these activities, but to expand the region’s ability to conceive, develop, and produce new technologies and to deploy new productive processes.
South Cen
InitiativNational
WIRED FPrograma. Indivi
degreindust
b. Total c. Instru
will b•
d. New cthat w
• e. Instru
numb•
AdditionaKansas Bo
• A• C• C• C• In
An ESL COnline CoComplemIn conjunCustomiz
• C• C• C
National CKansas Bo
TechCounties
tral Kansas W
e 1.1 Wichl Center for
Funding: $75s/Products/Piduals a) comes, certificatetry employmeinvestment in
uctors preparebe trained ann
Educators/curricula dev
will be trainedCurricula /
uctional equipber of addition
Equipment
al WIRED Woard of Regen
Associated DeComposites TeComposites FaComposites Rendustrial SystComposites coomposites Fam
mentary Agenction with NIed Training D
Composites OvComposites FaComposites FaCenter for Avoard of Regen
hnical CertificServed: Butl
Se
IRED Initiative
hita Area Ter Aviation T
55,000 Project
mpleting workfes, or industryent using WIRn incumbent wed and projectnually as a res/Students eloped and pr
d annually as a/Students
pment purchasnal students tht Value/Stude
Wins/Outcomnts approved:gree in Appliechnology Teabrication Tecepair Technictems Associatourse was devmiliarization ncy OutcomeIAR, developeDeveloped anverview and Cabrication andamiliarizationviation Traininnts approved cate and Certiler (13), Cow
edgwick (301)
echnical CoTraining (NC
force educatioy certificationRED funds. worker (instruted number ofult.
rojected numba result.
sed with WIRhat will be traents
mes : ied Science ofechnical Certichnical Certifcal Certificatetes of Appliedveloped that fo
course develes ed an online Id Delivered Composite Dd Assembly n ng building hNon Destructificate of Com
wley (4), Harp), and Sumne
9
llege (WATCAT)
Leverage:
on/training, bn and c) placed
uctor) trainingf additional st
ber of additio
RED funds anained annually
f Aviation Maficate ficate (first pre (first presentd Science andfocuses on theoped.
Introduction t
amage Contro
has been builttive Testing (
mpletion proger, Harvey (2
er (3)
TC)
: $20,051,312
b) receiving d into target
g. tudents that
onal students
nd projected y as a result.
anufacturing
resented in thted in the Spr
d Technical Ce Vietnamese
to Composite
ol
. (NDT), Assocgrams. 2), Kingman,
Composites
2 Goa
$10,85
3/12
$468,00
e Spring 2010ring 2010)
Certificate proculture.
e Repair, FAA
ciate of Appli
Marion, McP
Kansas Final R
al Outc
5
0
0
$2
1
$459
0)
ograms
A approved co
ied Science,
Pherson, Reno
Report
comes12
21,786
4/903
3/150
9,057/ 1,100
ourse.
o (1),
South Central Kansas WIRED Initiative Composites Kansas Final Report
10
Details by Course
Course Dates
Tot
al
Num
ber
of
Part
icip
ants
N
umbe
r of
W
IRE
D
Part
icip
ants
Geographic Breakdown
Composites Fabrication January 2010 30 4 Butler – 1(3.33%), Sedgwick – 29(96.67%)
Non-destructive Test September 2009 17 5 Cowley – 1(5.88%), Harvey – 2(11.77%),
Sedgwick – 14(82.35%) Composites Fabrication August 2009 30 29 Butler – 2(6.67%), Sedgwick – 28(93.33%) Cabinet Maker April 2009 1 0 Out of State address (Florida) Composites Fabrication April 2009 6 2 Sedgwick – 6(100%) Cabinet Maker January 2009 7 2 Sedgwick – 7(100%) Composites Fabrication January 2009 37 19 Butler – 5(13.51%), Sedgwick – 32(86.49%)
Cabinet Maker October 2008 24 11 Butler – 1(4.17%), Sedgwick – 22(91.66%), Sumner – 1(4.17%)
Composites Fabrication October 2008 48 22 Butler – 2(4.17%), Cowley – 3(6.25%), Sedgwick – 43(89.58%)
Cabinet Maker January 2008 7 2 Sedgwick – 7(100%)
Composites Fabrication January 2008 121 21 Butler – 2(1.65%), Greenwood – 1(0.83%), Harvey – 2 (1.65%), Reno – 1(0.83%), Sedgwick 113 (93.39%), Sumner – 2 (1.65%)
Summary by Course
Cabinet Maker (6) 39 15 Composites Fabrication (6) 272 97 Non-destructive Test (1) 17 5 ESL for Composites 0 Online Intro to Composites Repair NA Total 328 117
Wichita Area Technical College: Additional Highlights Through this grant opportunity, WATC was able to develop a Composites program that includes Composites Labs, classrooms, equipment and supplies. The 11,025 square foot Composites Lab space is located at the National Center for Aviation Training. This space consists of Autoclaves, Layup, Control, two Clean Rooms and freezer space for composite materials. The Autoclave area alone is about 4,000 square feet. Of the $755,000 allocated to WATC for this project, $468,000 was used to purchase required equipment, $249,000 in supplies and $38,000 for personnel/travel/training. The major equipment purchases included autoclave, nitrogen generator, downdraft bench, NDT Systems Multi-Mode Ultra Bond Tester, Composite Repair System, Heatcon Cold Cabinet, 5 Snap-on e-lock Tool Boxes, and 2 Gerber Technology Gebercutter Systems. More than 575 (325 WATC and 250 Customized Training) students in the past year have gone through composites training. Courses include Associated Degree in Applied Science of Aviation Manufacturing, Technical Certificate in Composite Technology, Certificate of Completion in Composite Repair and Composite Fabrication and a web-based interactive simulation course in bagging and layup, along with Customized Training for regional business seeking training in composites.
South Central Kansas WIRED Initiative Composites Kansas Final Report
11
Develop aerospace curriculum to create national standards in composites maintenance and repair. Activities/Outcomes: Instructors/Training
‐ Summer 2009 Two instructors hired for the Composites Program. ‐ Instructors completed Arabis Training in June 2009 They completed Phase I, II and III training
through Arabis, in which they earned a certification that is recognized by the FAA as recurrent training.
‐ NDT Program created in partnership with NIAR o Instructor hired March 2009 o NDT program temporarily set up at Comotara location during FY10 school year. o NDT program will begin classes at National Center for Aviation Training in August
2010. ‐ Aerospace Composite Repair and Assembly Training (Germaine – Bombardier) April 2009
Curriculum Development
‐ 2D online simulated training Bagging/Layup, Composites Familiarization ‐ ESL curriculum Applied ESL for Composites ‐ Approved Composite Programs – Composites Career Pathway (Stackable Credentials)
o Associates Degree in Applied Science of Aviation Manufacturing o Composite Technology – Technical Certificate o Composite Fabrication – Certificate of Completion o Composite Repair – Certificate of Completion
‐ Number of Graduates this year in Composites COC o 76 -Composite Fabrication Certificate of Completion o 25 – Composite Repair Certificate of Completion
‐ Customized Training 3 classes Developed and Delivered - 280 participants
o 3 classes Composites Overview and Composite Damage Control (16 hour class) Composite Fabrication and Assembly (40 hour class) Composite Familiarization (8 hour class)
Develop Composites Repair Lab based on identified required equipment Activities/Outcomes:
‐ WATC faculty met with business and industry leaders, Arabis faculty, NIAR to identify and purchase equipment needed for the program/lab.
‐ Total Area of Composites Lab – NCAT 11,025 square feet. Total area includes Autoclaves, Layup, Control, Two Clean Rooms, and freezer space.
‐ Composites Repair Lab – NCAT 2200 square feet fully equipped with required equipment and supplies.
Large equipment purchases: ‐ Autoclave ‐ Nitrogen Generator ‐ Downdraft Bench ‐ NDT Systems Multi-Mode Ultra Bond Tester
‐ Composite Repair System ‐ Heatcon Cold Cabinet ‐ (5) Snap-on e-Lock, Roll, Tool boxes ‐ (2) Gerber Technology Gerbercutter System
South Cen
InitiativWorkfor WorkforKansas W
WIRED Programa. Workb. Numb
fundsc. Degr
workd. Indiv
educaempl
e. TotalAdditionWIRED between ComplemReceivednational fand trainSystem, P(NFWS),FoundatiFamily FCounties
PerformDetail byProgram
Emergen
tral Kansas W
e 1.2 Coorrce Develop
rce AllianceWorkforceO
Funding: $ms/Productskforce educaber completes. ees, certifica
kforce educatviduals partication/traininoyment. l investment nal WIREDnewsletter wleaders in bu
mentary Agd a $2.25 milfoundations ing to low-inPACES is a , the Workfoion, the UnitFoundation as Served: Co
mance Summy Company
m
nt Worker Tr
IRED Initiative
rdinate and pment Resou
e of South CONE
$1,250,784 /Project
ation/traininged workforc
ates, or industion/trainingcipating and/g using WIR
in incumbenWins/Outc
was developeusiness, civi
gency Outcollion grant frto team up wncome indivcollaborativ
orce Allianceted Way of thand the Lattnowley, Harv
mary
raining Progr
Leverage Eurces
Central Kan
g using WIRe education/
stry certifiedg using WIRE/or completi
RED funds p
nt worker tracomes ed and public administra
omes rom the Johnwith local co
viduals. Theve project fune of South Che Plains, th
ner Family Fvey, McPhers
rams
12
Educational
nsas and
Leverage:
RED funds. /training usin
d credentialsED funds. ng workforc
placed in targ
aining.
shed for areaation, and ed
n S. and Jamompanies an Preparationnded by the
Central Kansahe City of Woundation. son, Reno, S
P
and
: $ 89,470
ng WIRED
s attained as
ce get industry
a distributionducation.
mes L Knightnd non-profitn for AviatioNational Fuas, the John
Wichita, Spirit
Sedgwick, an
Number of Participants
20
Composites
G
a
$1,054,
n to promote
t Foundationt groups to p
on Career Emund for Work
S. and Jamet AeroSystem
nd Sumner
sNumbeof Firm
n/a
Kansas Final R
Goal Outc570 527
200
448
,071 $886
e communic
n and other mprovide suppmployment kforce Soluties L. Knight ms, the Glas
er ms
GAm
$403,62
Report
omes1,1951,180
146
1,008
6,351
cation
major ort
ions
ss
Grant mount
25.40
South Central Kansas WIRED Initiative Composites Kansas Final Report
13
Detail by Company Program Number of
ParticipantsNumber of Firms
Grant Amount
Incumbent Worker Training Programs 1,280 16 $741,197.90Leadership Team WIRED Conferences 48 10 events n/aTotal 1,280 1,174,447.47 Workforce Alliance of South Central Kansas and Kansas WorkforceONE Coordinate and Leverage Educational and Workforce Development Resources: Workforce Alliance of South Central Kansas (WA) and Kansas WorkforceONE (KS WFOne) provided administration and oversight for the WIRED Initiative in addition to coordinating and leveraging educational and workforce development resources within the 10-county WIRED region. Keith Lawing, executive director of the Workforce Alliance of South Central Kansas, and Bob Dalke, executive director of Kansas WorkforceONE, provided career counseling, supportive service and WIRED funding for emerging workers to be trained in composites programs as well as customized training grants to regional employers who wanted to increase their composites and advanced materials process capabilities. Emergent Workers Over the three-year term of the grant, the WA and KS WFOne enrolled 20 students in advanced materials training. Below is a list of educational and training programs and the number of participants that were enrolled and completed programs that were supported by WIRED funding. More than $403,000 supported emergent workers composites and advanced materials course work. Incumbent Worker Training Program Business service representatives coordinated with business leaders to develop employer-driven customized training to support the business facility’s needs for restructuring or retraining their workforce in composites and/or advanced materials processes. The business services representatives acted as a liaison with the firm and the training institution(s) engaged to provide the instruction. Fifteen incumbent worker training programs were developed to train nearly 1,300 employees. WIRED funds provided more than $740,000 in support of more than $4 million of training. Detail by Company Company County Number of
Participants Grant
AmountPrecision Pattern Reno/Sedgwick 90 $31,393.59NIAR Sedgwick 8 $5,165.00Hutchinson Community College Reno 4 $8,442.00Johns Manville Kingman 9 $48,140.52Galaxy Tool Cowley 2 $3,690.00Kaman Industries (Plastic Fab Co, Inc.) Sedgwick 200 $75,386.90
South Central Kansas WIRED Initiative Composites Kansas Final Report
14
Detail by Company Company County Number of
Participants Grant
AmountHutchinson Community College Reno 1 $560.00GKN Sumner 5 $7,430.00Bombardier Learjet Sedgwick 961 $300,000.00LTC Sedgwick 109 $50,000.00GKN II Sumner 62 $42,570.00Rubbermaid Cowley 85 $40,860.00Park Aircraft Technologies Corporation Harvey 60 $50,000.00Calmar Cowley 189 $49,999.99AMI Riley 125 $50,000.00Butler Community College Butler 35 $14,108.00Total 1,280 $741,197.90 Administration and Oversight Travel Several times during the year, the U.S. Department of Labor, Employment and Training Administration would gather the WIRED regions for technical assistance academies. WIRED Leadership Team members, grant administrators and regional partners were encouraged to attend. Composites Kansas attended five WIRED Academies. Additional professional development and technical assistance travel included three National Association of Workforce Board Conferences and one Workforce Innovations Conference.
Conferences Attendees
Tom
Ald
ag
Tuck
y A
llen
Cal
eb A
sher
R
od B
lack
burn
M
ark
Con
way
A
nne
Cor
risto
n B
ob D
alke
R
ae A
nne
Dav
is
Mic
key
Forn
aro-
Dea
n A
man
da D
unca
n B
lake
Fla
nder
s D
ebra
Fra
nklin
Sh
erry
Geg
en
Jere
my
Hill
Sh
elly
Jone
s K
eith
Law
ing
Ger
ald
McC
oy
Cha
d Pe
ttera
Li
nda
Sorr
ell
Bar
bara
Tur
ner
Sher
ee U
tash
Pa
ul W
oole
y Jo
e Y
ager
WIRED Academy, November 1- 2, 2007, Seattle, Wa. X X X X X
WIRED Academy, May 1-2, 2008, Boston, Mass. X X
National Association of Workforce Boards, March 2008, Washington, D.C. X X X X
Workforce Innovations, July 15-17, 2008, New Orleans, La. X X
WIRED Fiscal Academy, August 5-6, 2008, Minneapolis, Minn. X X
WIRED Academy, The “ How To” Academy, October, 2008, Nashville, Tenn. X X X X X X
National Association of Workforce Boards, March 9-10 2009, Washington, D.C. X X X X X
WIRED Academy, June 18-19, 2009, X X X X X X X X
South Central Kansas WIRED Initiative Composites Kansas Final Report
15
Conferences Attendees
Tom
Ald
ag
Tuck
y A
llen
Cal
eb A
sher
R
od B
lack
burn
M
ark
Con
way
A
nne
Cor
risto
n B
ob D
alke
R
ae A
nne
Dav
is
Mic
key
Forn
aro-
Dea
n A
man
da D
unca
n B
lake
Fla
nder
s D
ebra
Fra
nklin
Sh
erry
Geg
en
Jere
my
Hill
Sh
elly
Jone
s K
eith
Law
ing
Ger
ald
McC
oy
Cha
d Pe
ttera
Li
nda
Sorr
ell
Bar
bara
Tur
ner
Sher
ee U
tash
Pa
ul W
oole
y Jo
e Y
ager
Washington, D.C. University Economic Development Association, October 11-13, 2009, San Antonio, Tex.
X X X X X X
National Association of Workforce Boards, March 6-9, 2010, Washington, D.C. X X X X X X X X
April – June 2010
• At the recommendation of the regional Renewable Energy Task Force, AMI will provide 125 regional manufacturing firms with business development pre-assessments to analyze each firm’s competitive potential in the wind energy supply chain and provide a written assessment that will inform/train business leaders about how to connect with the emerging wind market and strategies to improve their operations, and increase their competitive advantage in regards to the wind supply chain.
July – September 2009 • A Sedgwick County aviation firm will train more than 900 employees in composites with
$300,000 of WIRED funds. • A Reno County education provider will train one employee in high tech sciences with $800 of
WIRED funds. • A Sedgwick County composites manufacturer will train more than 109 employees in composites
using $50,000 of WIRED funds. • A Harvey County composites manufacturer will train more than 109 employees in composites
using $50,000 of WIRED funds. April – June 2009
• The business services representative attended the 7th Annual WIRED Academy in Washington D.C. A primary issue at the conference was sustainability.
January – March 2009 • Cowley County equipment manufacturer applied for a $3,690 WIRED grant in January in order
to train two individuals in the Growth Venture Class offered by WSU’s Center for Entrepreneurship.
• Hutchinson Community College applied for an $8,442 WIRED grant in January to train four individuals in composite aircraft fabrication and repair. The application was approved.
• Sedgwick County advanced materials firm applied for a $95,386.90 WIRED grant for a development program and employee retraining.
• Kingman County advanced materials firm applied for a $49,351.10 WIRED grant in March in order to train nine employees. The application was approved.
• Sedgwick County composites firm applied for a $7,430 WIRED grant in March to train five employees in Ultrasonic Testing.
October – December 2008
South Central Kansas WIRED Initiative Composites Kansas Final Report
16
• The WIRED Worker Training Program guidelines were finalized with input from the Leadership Team and Strategy 3 Implementation Team.
• Sedgwick County composites firm trained 45 employees and a total of $10,350 of cumulative funds was distributed during the quarter.
• NIAR completed training of eight individuals in the third quarter, $5,165 of reimbursement WIRED funds were scheduled to be disbursed during the fourth quarter.
• Sedgwick County advanced materials engineering firm was approved for a $17,780 training grant.
July – September 2008 • WA of South Central Kansas was awarded a $2.25 million from the Knight Foundation and other
major national foundations to coordinate with local and non-profit companies to help low-income individuals move over barriers to high-paying aircraft jobs.
• Sedgwick/Reno County composites firm applied for an $186,750 WIRED grant in September to hire and train 90 shop floor laborers during a four quarter period to increase the quantity and quality of products as well as reduce turnover.
• NIAR applied for a $5,165 WIRED grant in September to supplement the training costs for eight lab technicians for a training program. The lab technicians should earn certification to allow them to train 57 additional operators.
April – June 2008 • A continuation agreement for Collaboration in Support of the Composites Kansas WIRED
initiative was drafted by the Workforce Alliance of South Central Kansas and Kansas WorkforceONE.
January – March 2008 • An Agreement for Collaboration in Support of the Composites Kansas WIRED Initiative was
drafted and signed by the Workforce Alliance of South Central Kansas and Kansas WorkforceONE.
• The Resource Fair for regional economic development professionals and development agencies held in February.
South Cen
InitiativCamps Wichita WIRED FProgramf. Awar
summg. Amouh. Worki. Projec
strategj. CareeAdditionaAn additiocommunit46 percenComplemSupport frCounties
Summer January –
• Wre
April – Ju• A
ofwA
January -• A
October –• A
stwam
July – Se
tral Kansas W
e 1.3 Broa
State Unive
Funding: $75s/Products/P
rd scholarshipmer camps. unt of scholark-Based Stratected number ogies develope
er Guidance Sal WIRED Wonal Bio-engity are underre
nt of the 54 girmentary Agenfrom the Socie
Served: ButlSu
Camp (Broa– March 201
Workforce Allespectively toune 2009
A summer dayf 54 girls, 46%
was supported Aerosystems.
- March 200A proposal sub– December
A second Bioetudents are un
will be offeredmong the Colptember 200
IRED Initiative
aden Particip
ersity, Colle
5,000 Project ps to middle s
rships awardeegies Developof students traed. Strategies DevWins/Outcomineering campepresented in rls who attendncy Outcomeety of Womenler, Cowley, H
umner
adening Part10 liance of Souto the WSU Co
y camp for gir% of which arby funding o
9 bmitted to the2008
engineering canderrepresented during the thllege of Engin08
pation in En
ege of Engin
chool and hig
ed. ped/Implemenained as a res
veloped/Implemes p was held at math, sciencded the 2009 es n Engineers.Harper, Harv
icipation in E
th Central Kaollege of Engi
rls in grades 4re Hispanic.
of $15,000 fro
e society of W
amp will be oed in math, schird week of Jneering’s acti
17
ngineering,
neering
Leverage:
gh school stud
nted. sult of work b
emented.
North High Se, technologySTEP Camp
ey, Kingman,
Engineering)
ansas and Boeineering summ
4 through 6 w30 girls were
om the Knight
Women Engine
offered in onecience, technoJuly. The leavities to supp
Youth
: $ 289,930
dents for
based
School wherey, and enginee
for girls are H
, Marion, Mc
): Additional
eing have awamer camps.
was held June e on a waitingt Foundation
eers for their
e of the commology and eng
adership teamport the camp
Composites
Go18
$75,00
5
e most studentering positionHispanic.
cPherson, Ren
l Highlights
arded $6,500
15 through 1g list for the c
and $5,000 fr
support was
munities in whgineering pos
m was asked to.
Kansas Final R
oal Outc80
00 1
50
2
$7
ts within the ns.
no, Sedgwick
and $4,500
9 with particiamp. The cam
from Spirit
approved.
hich most of tsitions. The co reallocate fu
Report
comes211
72,771
2 58
2
, and
ipation mp
the camp unds
South Central Kansas WIRED Initiative Composites Kansas Final Report
18
• The three day camps were evaluated based on the feedback received from participants and counselors. Three additional day camps were designed. o Audio Synthesis with Pure Data- a camp with a hands-on environment where high school
students can learn how the techno-sounds in today’s music is created as well as the methods and math needed to create digital sounds.
o Kinetic Art- high school students will design and create works that move and interact in the real world with the use of a microcontroller.
o Gamemaker- high school students will learn to design and create their own computer games. • Three private foundations have been identified as potential funding sources for the camps and
proposals will be submitted shortly. Performance Summary
Overall Summer Camps 2010 (288 students, 14 no-shows) Scholarships Gender Ethnicity
Yes No Male Female CaucasianAfrican
American HispanicNative
American Asian Not
Indicated 128 160 190 98 164 15 76 3 14 17
GameMaker 2010 (43 students) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 1 42 33 10 32 3 4 0 2 2
Gateway Afternoon 2010 (18 students, 2 no-shows) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 8 10 15 3 9 0 3 0 4 2
Gateway Morning 2010 (19 students, 1 no-show) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 14 5 15 4 6 1 11 0 1 0
Engineering with LEGO 2010 (45 students, 1 no-show) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 1 44 37 8 36 3 2 0 1 3
Mechanics & Microcontrollers 2010 (31 students, 2 no-shows) Scholarships Gender Ethnicity
South Central Kansas WIRED Initiative Composites Kansas Final Report
19
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 23 8 26 5 19 2 8 0 1 1
STEP Co-ed 2010 (49 students, 1 no-show) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 16 33 34 15 25 1 16 2 3 2
STEP Girls 2010 (45 students, 3 no-shows) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 32 13 0 45 15 0 26 1 1 3
Sustainability 2010 (38 students, 4 no-shows) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated 33 5 30 8 22 5 6 0 1 4
Overall Summer Camps 2009 (177 students)
Scholarships Gender Ethnicity
Yes No Male Femal
e Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 103 74 90 87 83 7 71 4 6 4 1
BioEngineering North 2009 (40 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 35 5 29 11 18 0 16 0 2 4 0
BioEngineering WSU 2009 (33 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 28 5 20 13 7 0 24 0 1 0 1
GameMaker 2009 (23 students)
Scholarships Gender Ethnicity
South Central Kansas WIRED Initiative Composites Kansas Final Report
20
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 3 20 19 4 14 2 5 1 0 0 0
LEGO Robotics 2009 (27 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 2 25 22 5 21 1 1 2 2 0 0
STEP Girls 2009 (54 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 35 19 0 54 23 4 25 1 1 0 0
Overall Summer Camps 2008 (124 students) Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 50 74 42 82 25 4 4 2 1 88 0
STEP Girls 2008 (44 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 6 38 0 44 15 1 3 1 1 23 0
LEGO Robotics 2008 (25 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 11 14 16 9 2 2 1 0 0 20 0
BioEngineering 2008 (55 students)
Scholarships Gender Ethnicity
Yes No Male Female Caucasian African
American Hispanic Native
American Asian Not
Indicated Multiracial 33 22 26 29 8 1 0 1 0 45 0
South Cen
InitiativWichita
WIRED FProgram
a. Tte
b. Prc. N
AdditionaPLTW CoThe KansPLTW EnComplem$2 millionCounties
PerformaDetail byCourse
IntroductiDesign PrDigital ElGateway tAerospaceEnergy anIntroductiDesign PrGateway tIntroductiDesign PrIntroductiDesign Pr
tral Kansas W
e 1.4 ProjState Unive
Funding: $ 5s/Products/P
Train teachers echnology courojected num
New curricula al WIRED Wore Training Was PLTW Co
ngineering Dementary Agenn, five-year grServed: Butl
tea
ance Summa Course
ion to Enginerinciples of Enlectronics to Technologe Engineeringnd the Environion to Enginerinciples of Ento Technologion to Enginerinciples of Enion to Enginerinciples of En
IRED Initiative
ect Lead thersity, Colle
530,654 Project
so they can oursework.
mber of studendeveloped.
Wins/OutcomWorkshop couunselors Con
esign and Devncy Outcomerant from the ler (6), Cowleachers living
ry
ering ngineering
gy g nment ering ngineering
gy ering ngineering ering ngineering
he Way ege of Engin
offer quality e
nts taught as a
mes urses taught b
nference held velopment Coes Knight Foun
ey (4), Harveyout of KS (30
21
neering
Leverage:
engineering an
a result of teac
by WSU’s Coat WSU in D
ompetitions fo
ndation. y (3), Reno (40) (data is for
: $ 714,612
nd
cher training.
ollege of EngiDecember 200
or the past fou
4), Sedgwick r teacher train
Composites
Goa20
4,00
ineering. 9. ur years were
k (39), other Kning only)
Dates
2010 2010 2010 2010 2010 2010 2009 2009 2009 2008 2008 2007 2007
Kansas Final R
al Outc0
0
e held at WSU
KS counties (3
TeachParticip
4125
1635
158
17176
106
Report
comes264
7,257
7
U.
38),
her pants
South Central Kansas WIRED Initiative Composites Kansas Final Report
22
Summary by Course Teacher ParticipantsIntroduction to Engineering 46 Design Principles of Engineering 32 Digital Electronics 5 Gateway to Technology 33 Aerospace Engineering 3 Energy and the Environment 5 Total 124 Each December a PLTW Counselor Conference was held. Over the three-year grant period, 156 counselors attended the professional development conference. Project Lead The Way (PLTW) is Wichita State University College of Engineering pre-engineering program where high schools and middle school students complete hands-on activities that apply and reinforce concepts in math and science while working as a team.
WIRED Grants to Regional Schools and Courses Affected
Districts Schools Classes/Courses Total 2008 2 3 5 $25,0002009 5 14 20 $98,3732010 5 20 21 $402,871
Total WIRED Awards $526,244
2008 District School Class/Course Class Total District Total
Wichita USD 259 Northwest High School Principles of Engineering $5,000 $5,000 Winfield USD 465 Winfield High School Digital Electronics $4,512
Winfield High School Engineering Design & Development $3,995
Aerospace Engineering $4,934 Principles of Engineering $4,831
$20,000
Rounded
2008 Total Awards $25,000
2009 District School Class/Course Class Total District Total
Arkansas City USD 470 Arkansas City High School
Introduction to Engineering Design $5,000 $5,000
Derby USD 260 Derby High School Introduction to Engineering Design $4,700
Derby Middle School Gateway to Technology Section 1 $4,982
South Central Kansas WIRED Initiative Composites Kansas Final Report
23
2009 Cont. District School Class/Course Class Total District Total
Derby Middle School Gateway to Technology Section 2 $4,641
Derby Middle School Gateway to Technology Section 3 $4,938
Derby 6th Grade Center Gateway to Technology $4,144 $23,405
Hutchinson USD 308 Hutchinson High School Civil Engineering & Architecture $4,968
Hutchinson High School Gateway to Technology $5,000 $9,968
Newton USD 373 Newton High School Introduction to Engineering Design $5,000 $5,000
Wichita USD 259 Southeast High School Introduction to Engineering Design $5,000
Coleman Middle School Gateway to Technology $5,000
Curtis Middle School Gateway to Technology Section 1 $5,000
Curtis Middle School Gateway to Technology Section 2 $5,000
Marshall Middle School Gateway to Technology $5,000 Mayberry Middle School Gateway to Technology $5,000 Pleasant Valley Middle School Gateway to Technology $5,000
Truesdell Middle School Gateway to Technology Section 1 $5,000
Truesdell Middle School Gateway to Technology Section 2 $5,000
Wilbur Middle School Gateway to Technology Section 1 $5,000
Wilbur Middle School Gateway to Technology Section 2 $5,000
$55,0002009 Total Awards $98,373
2010 District School Class/Course Class Total District Total
Arkansas City USD 470 Arkansas City High School Principles of Engineering $10,000
Digital Electronics $10,000 $20,000
Derby USD 260 Derby High School Principles of Engineering $13,500 $13,500 Hutchinson USD 308 Hutchinson High School Aerospace Engineering $9,000 $9,000
South Central Kansas WIRED Initiative Composites Kansas Final Report
24
2010 Cont. District School Class/Course Class Total
District Total
Newton USD 373 Newton High School Principles of Engineering $10,000 $10,000
Wichita USD 259 Heights High School Introduction to Engineering Design $10,000
Northwest High School Digital Electronics $10,000 Southeast High School Principles of Engineering $10,000 Allison Middle School Gateway to Technology $15,000 Hadley Middle School Gateway to Technology $30,000 Robinson Middle School Gateway to Technology $30,000 Stucky Middle School Gateway to Technology $15,000 Wells Middle School Gateway to Technology $6,927 Brooks Middle School Gateway to Technology $23,444 $23,444
Northeast Magnet High School
Computer lab (all PLTW courses) $22,238
Blackbear Bosin Academy Gateway to Technology $29,622 Gordon Parks Academy Gateway to Technology $29,628 Hamilton Middle School Gateway to Technology $29,628
Horace Mann Middle School Gateway to Technology $29,628
Jardine Middle School Gateway to Technology $29,628 Mead Middle School Gateway to Technology $29,628 $200,0002010 Total Awards $402,871
Project Lead the Way: Additional Highlights October – December 2009
• The Kansas PLTW Counselor Conference was held December 17, 2009. 88 counselors, teachers, and administrators participated in the conference.
• Letters outlining PLTW were sent to all superintendents in the 10 county WIRED areas. All schools who responded to the letters were visited.
July – September 2009 • A presentation about PLTW programs was made at a technical education conference and several
visits were made to interested schools in the WIRED region. April – June 2009
• The WSU COE Engineering Design and Development Competition was held at WSU on April 27, 2009. Four teams, 16 students, competed. Judges included advisory board members, industry professionals, and COE faculty and students.
• An advisory board meeting was held to discuss the grant proposal process. Two of the 2009’s grant recipients presented PLTW implementation plans.
January – March 2009 • $98,373 has been distributed to schools in the second year of the WIRED grant. $290,250 has
been distributed from the Knight Foundation. July – September 2008
• WSU COE has been awarded $2 million from the Knight Foundation to expand PLTW to 9 and 18 additional schools in Sedgwick County.
• Schools from the Wichita Public School District, Winfield, Derby, Newton, and Butler are expected to implement PLTW this year.
January – March 2008 • The advisory board met to determine the strategy and rules of the mini-grants.
South Cen
InitiativCertifica Wichita Center f
in Co WIRED FPrograma. Short b. GraduAdditiona
• DE
• Dshgr
Complem• D
tedeMcore
• FM
Counties
PerformaDetail byCourse
Basic ComBasic ComBasic ComBasic ComBasic Com
tral Kansas W
e 1.5 Shortate
State Univefor Learningomposite M
Funding: $20s/Products/PCourses in C
uate Certificaal WIRED W
Development oEngineers Due to high dehort courses. raduate certif
mentary AgenDevelopment oechnician 1-3,egree in Engi
Members of thollege, and Kestructured inaculty memb
Materials into Served: Butl
(0)M
ance Summa Course
mposites for Emposites for Emposites for Emposites for Nmposites for E
IRED Initiative
t Courses in
ersity, Colleg, Explorati
Materials for
08,050 Project Composites te in Compos
Wins/Outcomof two course
emand from bSome of the
ficate in compncy Outcomeof a Composi, Associates dineering, Mashe task force w
K-12), industrynto a uniform ers are workina one semesteler (7), Cowle), Reno (3), Sontgomery C
ry
Engineers Engineers Engineers Non-EngineerEngineers
n Composite
ege of Enginion, ResearcAerospace
sites mes es: Composite
business and iadditional fun
posites scholaes ites Core Comdegree, Bachester’s and PhDwere from acay, and researcarrangement ng towards reer program. ey (7), Harper
Sedgwick (21County (1)
Da
MaOcNo
rs MaJan
25
es & Gradu
neering ch and DeveApplication
Leverage:
es for Non-En
ndustry, addinding for the
arships.
mpetencies Taelor’s degree D degrees in Eademia (univech & developmsuitable for e
estructuring th
r (0), Harvey 1), and Sumn
ates
arch 2008 ctober/Novemovember/Decearch 2009 nuary 2010
uate
elopment ns
: $ 99,200
ngineers and A
itional WIREDshort courses
ask Force to din Engineerin
Engineering wersity, commument. Compeeducational inhe graduate c
(4), Kingmanner (3) – addit
mber 2008 ember 2008
Composites
Goa91
Advanced Co
D funds weres came from u
draft competeng Technologwith emphasisunity collegesetencies are cnstitutions. certificate in C
n (3), Mariontional particip
NumbPartici
2235283830
Kansas Final R
al Outc5 2
omposites for
e reallocated tundistributed
encies for gy, Bachelor’s on Composis, technical
currently bein
Composite
n (2), McPherpation by
ber of pants
Numof F
2 15 8 18 20
Report
comes241
2
to the
’s ites.
ng
rson
mber Firms 10 8 14 23 9
South Central Kansas WIRED Initiative Composites Kansas Final Report
26
Advanced Composites for Engineers March 2010 29 7 Basic Composites for Engineers April/May 2010 30 8 Basic Composites for Non-Engineers June 2010 29 18 Summary by Course Basic Composites for Non-Engineers 67 37 Basic Composites for Engineers 145 32 Advanced Composites for Engineers 29 7 Total 241 64 Participating Firms: Aerospace Systems & Components Inc. (2), Air Plains Services Inc. (1), Airbus North America Engineering Inc. (36), Benecor, Inc. (1), Black Hills Energy (1), Boeing Supplier Quality (2), Bombardier Learjet (19), Buffco Engineering (1), Butler Community College (1), Butler County Economic Development (1), Cessna Aircraft Company (52), CiBOR (3), City of Derby (1), City of Wichita (1), City of Winfield (2), Clearwater Engineering (1), Convergys Manufacturing (1), Cowley College (3), Cowley County Economic Development Partnership (1), Cowley First (1), D&S Manufacturing Inc. (1), Dell Services Inc. (2), D-J Engineering (3), eServ (4), FAA - Wichita Aircraft Certification Office (7), Former County Commissioner (1), Global Engineering & Technology (1), GWEDC (1), Harlow Aerostructures LLC (2), Harper Trucks (1), Hartleys Iron (1), Harvey County Economic Development Council (2), Hawker Beechcraft Corporation (2), Hillsboro Development Corporation (1), Hutchinson Community College (3), JMT Industries, Inc. (2), Kaman Aerostructures- Wichita (1), Kansas Department of Commerce (1), KCEDC (1), Marion County (1), Metal Finishing Co. (1), Mize & Co., Inc. (1), North American Aviation (1), OSCI Inc. (1), PRO-Unlimited (1), REAP (3), Retired (1), Sedgwick County (2), Sedgwick County Community Development (1), Sedgwick County Economic Development (1), Senior Aerospace Composites (5), Spirit AeroSystems Inc. (23), Superior Tool Service Inc. (1), Techmer PM (1), TECT Aerospace (1), Unemployed (1), USD 259 (1), USD 373 (1), Wichita Area Technical College (4), Wichita Metro Chamber of Commerce, (1), Wichita State University (15), Wichita West High School (1), Workforce Alliance of South Central Kansas (3), Workforce Solutions (1), Participant Grand Total (241), Total Number of Firms (64) Composites Short Courses: Additional Highlights April – June 2009
• The first scholarship to a student who will complete the Composite Materials graduate certificate in the 2009 – 2010 school year was awarded.
October – December 2008 • Applications for the scholarship for the graduate certificate in Composite Materials were
reviewed. None of the applicants are eligible for the award. July – September 2008
• Information pertaining to the WIRED grant scholarship was distributed to all of the individual partners with an encouragement to distribute the information to their employees who may want to seek a graduate certificate in Composite Materials. Applicants were encouraged to return the applications prior to November 15, 2008.
April – June 2008 • The College of Engineering Composites Task Force is working with four department chairs to
recruit candidates for the WIRED scholarship that is available. January – March 2008
• Guidelines for the WIRED scholarship for the Composite Materials graduate certificate were developed. They were distributed to all departments within the COE, among the students and will be posted on the COE web page.
South Central Kansas WIRED Initiative Composites Kansas Final Report
27
The Initiative has also engaged a volunteer task force, led by Wichita State University’s College of Engineering Dean Zulma Toro-Ramos, to develop Composites Core Competencies. There are two working groups – the first is working on technician competencies (Level 1, fabrication; Level 2, repair; Level 3 includes safety and NDT; Level 4, Associates Degree). The second working group is developing college competencies including a BS in Engineering Technology (with a concentration in Composites), a BS in Engineering (with a concentration in composites), Masters in Composites Engineering, and a PhD in Engineering (with a concentration in Composites). The intent of this project is to provide the competencies as technical support to other institutions and to submit a summary of them to the ETA for national publication.
South Cen
Initiativ
WIRED FPrograma. Produ
PipeliAdditionaBroadcastCounties
Kansas COctober –
• Tacpran
• TunC
July – Se• S
edbrhtmdi
• Pr• IM
ofan
October –• S
deCpl
July – Se• Sh
tral Kansas W
e 1.6 Kans
Funding: $ 1s/Products/P
uce fifty minuine. al WIRED Wt of the video Served: Butl
Su
Career Pipeli– December
The Kansas Cactivities will brovided by Knd the Kansas
The seven comnltd.com/mas
Composites”. ptember 200even vignetteducation, hearoadcast. Thettp://www.rul
made correctioistributed to Wresented the cMG began disf the extendednd potential p– December ite visit to Kaevelopment a
Cobalt Boats inlan shooting. ptember 200hot initial vid
IRED Initiative
sas Career P
150,000 Project utes of video v
Wins/Outcom“Super Mate
ler, Cowley, Humner
ne: Addition2009 areer Pipelinebe transferredDOC, the Kas Department
mposite video sterweb/conte
09 e videos that ilth and the ree video, Supelepromedia.coons and receivWIRED partncompleted comscussions withd composite vplacement. 2008
ansas City to mand met with Bn southeast K Met with Gi
08 deo content fo
Pipeline
vignettes for t
mes erials and the Harper, Harv
nal Highlight
e Board decidd to the Kansaansas State Det of Correctionvignettes are
ent/ks/travelka
introduce compair of compo
er Materials aom/kcp-compved final apprners. mposite videoh National Puvideo. The co
meet with theBarbara Broo
Kansas and a sil Tatman to l
or WSU summ
28
Leverage:
the Kansas C
people who mey, Kingman,
ts
ded to cease opas Departmenepartment of Ens.
e posted on thansas.aspx?rn
mposites for aosites were co
and the Peoplposites. Revieroval of the w
o to KDOC foublic Televisiompleted cop
e Kansas Biosoks to finalizesurgery room ine out comp
mer camp at E
: $ 2,714,701
areer
make them” o, Marion, Mc
perations as ont of CommerEducation, th
he KCP websind=677 and c
agriculture, avompleted alonle Who Make ewed videos w
work. DVD co
for placement ion and the Dipy will be pres
science Authoe scope and co
for review prposite video sh
Exploration P
Composites
Goa
5
on Public TelecPherson, Ren
of August 31,rce with contihe Kansas Boa
ite at https://wlick on “Vide
viation, manung with a lonThem, is onliwith WIREDopies of the v
on the Kuderiscovery chansented for the
ority for videoontent of viderocedures forhooting locati
Place.
Kansas Final R
al Outcome0
evision. no, Sedgwick
, 2009. All inued servicesard of Regent
www.visions-eo on
ufacturing, nger video for ine at
D team membevideos were
r website. nnel for placee channels’ re
o content eos. Visited r videos and toions.
Report
es 50
, and
s ts,
ers,
ement eview
o
South Central Kansas WIRED Initiative Composites Kansas Final Report
29
April – June 2008 • Contracted with IMG Productions for video development and filming and met with IMG
Productions to review existing composite video footage. Also, met with the WIRED Leadership team to discuss locations for video shooting.
• Scheduled initial video filming at Exploration Place exhibit in July. January – March 2008
• Developed model layouts of the composite videos and planned the types and locations of the videos to be produced. Researched the composite field to determine potential companies for video shoots.
• A production team is ready to begin once we reach final selection on locations and content.
South Cen
InitiativOrthopa
WIRED FPrograma. Numb
confeb. Increa
commdevelo
AdditionaOrthopaedWichita foDevelopinORI reprepresented ComplemReceived compositeCounties
Over the lof the Cenmirrored twill integroriginal inthat will bleading to Center of Milestone
• A• C
Obe
• T20pr
tral Kansas W
e 2.1 Bio-Caedic Resear
Funding: $43s/Products/Pber of scientisrences/sympoased ORI rese
mercializationop bio compo
al WIRED Wdic major PhDor their thesisng FDA Classesentatives vis
several lectumentary Agen
a $2.1 millioe prototypes. Served: Butl
Sum
last few yearsnter of Innovathe structure orate expertisendustry. CiBObring a new vo healthier pat
f Innovation
es from 2010Articles of IncCEO, COO, COperations, Di
een filled. The first Board
010 Managemrototypes; com
IRED Initiative
Composite Rrch Institut
3,000 Project sts attending posiums. earch of poten
n, and businesosite medical
Wins/OutcomD students fros work and cos 1, 2, and 3 msited, lectured
ures in China. ncy Outcomen grant from
ler, Cowley, Hmner
s, the region hation for Biomof the compo
e in medicine,OR will focusitality to the ctients.
for Biomate
0 Mid-Year Rorporation anFO, Vice Preirector of Bio
d of Directorsment Plan thatmpletion of th
Research Ine
professional d
ntial opportuns developmenproducts.
mes om the Shandontribute to Omedical devicd, and worked
es the John S. an
Harper, Harv
has been nurtumaterials in Osite devices C, science, coms on finding recomposites co
rials in Orth
Report nd bylaws weresident of Comengineering,
s meeting wast establishes ohree labs; an
30
nitiative
Leverage:
development
nities, nt organizatio
dong UniversiRI research p
ces for manufd at six confe
nd James L. K
ey, Kingman,
uring and cultOrthopaedic RCiBOR will somposites and meal-world, proommunity and
hopaedic Res
re submitted omposite ReseaResearch Eng
s held on Sepobjectives sucequipment ac
: $ 3,657,207
ons to
ity Affiliated projects. facturers. rences nation
Knight Found
, Marion, Mc
tivating the bResearch has boon be designmanufacturinoducible medd provide enh
search: Addit
on July 9, 200arch and Devgineer and Of
ptember 16, 20ch as: developcquisition plan
Composites
Goa
1
$36,00
Hospital in C
nally and inter
dation for dev
cPherson, Ren
birth of CiBORbeen an exercning and prod
ng to create thdical composithanced medic
tional Highli
09. velopment, Diffice Manager
009. The boapment of at len that will no
Kansas Final R
al Outcome2
0 $3
China will stud
rnationally an
velopment of
no, Sedgwick
R. The formacise that has ducing. “CiBe seeds of an te application
cal treatments
ights
irector of Busr positions ha
ard approved east three
ot exceed $2.2
Report
es 10
33,297
dy in
nd
bio
, and
ation
OR
ns s
siness ave
a FY
2
South Central Kansas WIRED Initiative Composites Kansas Final Report
31
million; facility modification and lease costs of $700,000 or less; achievement of the KBA’s matching requirements; a positive cash position at year end; and revenues of more than $5.0 million.
• The policy and procedure for a conflict of interest and capital expenditure was approved on September 22, 2009.
• Awarded a 5 year, $2.1 million grant from the John S. and James L. Knight Foundation for prototype development on September 24, 2009.
• Received $520,000 from the Knight Foundation in lieu of WIRED grant funds. • Completed a Product Analysis Matrix on products in consideration for development in FY 2010.
Developed a prototype prioritization plan based on medical device companies and composite manufacturer’s report.
• Pursued financial support from medical device companies for prototype development and submitted proposals to develop prosthetic joint and instrument tray prototypes.
• Established service agreements and rates for employee support services with Via Christi Research, Orthopaedic Research, Human Resources, and Financial Services as well as with WSU, NIAR, and ORA.
• Met all KBA matching funds requirements to date. Talent Development and Related Travel April – June 2010
• Drs Shang-You Yang and Haiying Yu attended the Society for Biomaterials Annual Meeting held on April 21-24, 2010 in Seattle, WA. The theme of the meeting, Where Materials Meet Biology, reflects the central position of the biomaterials discipline in fostering development of new implant materials and devices for improvement of the human condition. More than 1,000 attendees including all the leading scientists in the fields were there to share their new findings, innovations, and novel concepts.
January – March 2010 • CiBOR submitted a new proposal for a FDA Class 1 device to a new manufacturer and are
awaiting feedback. CiBOR is in contract negotiations with two other large medical device manufacturers.
• CiBOR’s goals are employment of a permanent CEO, a cellular biologist, an imaging director, a research engineer and two lab technicians and to be in 9229 E 37th street facility by June 1, 2010, and also to have received customer revenue of $50,000 by the end of the fourth quarter.
• Scientific equipment of $998,000 will be purchased using KBA funds. October – December 2009
• Three major composite related projects with medical device manufacturers have been initiated. • A contract with Troy Carlson was initiated to conduct onsite visits to collect data on a firm’s
capabilities to migrate into bio composite applications and to add data to the composite manufacturing database. The data will be shared with GWEDC in order to develop a local composite manufacturing database. The initiative is funded with leveraged Kansas Bioscience Funds.
July – September 2009 • Specific short-term and long-term projects have been identified using a Product Analysis Matrix. • CiBOR was awarded a $2.1 million grant from the Knight Foundation for the development of bio
composite prototypes. • Dr. Wooley attended two meetings, the 2009 “Summit of the University Economic Development
Association” in San Antonio, Texas and the “Center of the Business of Life Sciences” in Warsaw, Indiana, with the support of WIRED funds.
January – March 2009
South Central Kansas WIRED Initiative Composites Kansas Final Report
32
• Dr. Wooley attended the Orthopaedic Research Society and the American Academy of Orthopaedic Surgeons Meeting in Las Vegas, Nevada in February. He met with senior scientists from major orthopaedic implant manufacturers and explored a number of potential research and development projects. Dr. Yang also attended the Orthopaedic Research Society and spoke about his research involving metal allergy testing and immune responses to candidate composite material. Valuable contacts were made or reestablished during the meetings.
• Dr. Wooley and Dr. Yang attended the Qingdao International Joint Arthroplasty Summit where Dr. Wooley lectured on biomaterial application in orthopaedic practice with attendance of top orthopaedic surgeons from China. The lecture was well received.
• While in Beijing, China, Drs. Wooley and Yang spoke with Dr. Guo, Medical Director of Stryker in China about composite application in orthopaedic surgery in China. Further communication and collaboration will continue.
• Drs. Wooley and Yang delivered three lectures at the Shadong University Clinical College and Jinan Central Hospital to teach surgeons, residents, medical students and clinical staff about the current problems in total joint replacement. The discussions with Jinan city officials, hospital and university administrators, the president of Jinan Central Hospital and the Chair of the Orthopaedic Surgery were productive. A tie has been established between ORI and Shandong University Affiliated Hospital; a selected group of Orthopaedic major PhD students will study in Wichita for their thesis work and contribute to ORI research projects.
• Academic communications were developed between ORI and the Taishan Medical University when Dr. Yang visited with the vice president of the school. Dr. Yang presented data on aseptic loosening of total joint replacement and biomaterial composite for bone graft substitute to two other university affiliated hospitals.
October – December 2008 • Michael Good and Dr. Wooley traveled to San Diego for a National Bioscience Meeting. They
provided support to the Kansas Bioscience exhibitor’s booth and social events. They also spoke to representatives from several states and numerous industries about potential opportunities of investing and/or collaborating with CiBOR.
• Dr. Wooley traveled to the Orthopaedic Research Society and American Academy of Orthopaedic Surgeons meeting in San Francisco where he chaired a session on inflammation and infection.
July – September 2008 • All of the Orthopaedic Research Institute staff are in place and have submitted a business plan for
the Center of Innovation. January – March 2008
• Staff from the Orthopaedic Research Institute attended the WIRED Bioscience Institute in February.
• Stryker representatives visited the National Institute for Aviation Research related to the bio composites initiative.
South Cen
InitiativWichita
WIRED FProgram
a. Fb. D
tec. Dd. Pre. L
Additiona• Pr
Counties
PerformaDetail byCourse
FastTrac®
Practical E
Business PTwo-y
High s
Total
tral Kansas W
e 2.2-3 KaState Unive
Funding: $ 3s/Products/PastTrac® New
Develop publicechnology tran
Development oresent public
Launch annualal WIRED Wractical EntreServed: Butl
ance Summa Course
® New Ventu
Entrepreneur
Plan Competiyear colleges
chool
IRED Initiative
ansas Entrepersity, Cent
319,500 Project w VentureTM c program to nsfer to the coof Practical Eprograms for
l regional highWins/Outcomepreneur Trainler, Cowley, H
ry
ureTM and Grow
ition
preneurial Iter for Entre
and FastTracprovide feedboncept’s orig
Entrepreneur Tr Practical Enh school busi
mes: ning Tools, a Harper, Harv
wth VentureT
33
Initiative epreneursh
Leverage:
c® Growth Veback to the poinator
Training Toolntrepreneur Triness plan tou
lunch and leaey, Kingman,
Dat
TM FalSprFalSpr
200
Spr
Spr
Spr
hip
: $ 379,642
entureTM otential viabil
ls raining Toolsurnament
arn series, dev, Reno, Sedgw
tes
ll 2008 ring 2009 ll 2009 ring 2010
09-2010
ring 2009
ring 2010
ring 2010
Composites
G5
lity of
s
veloped morewick, Sumner
NumberParticipa
15 18 16 14
180
7
8
12
270
Kansas Final R
Goal Outc50 63 18
26 27 2
e than 20 sessr
r of ants
Numof F
1111
Not co
5
Communi
2Communi
4High S
7
Report
comes3 8
6 70 2
sions.
mber irms
15 18 16 14
ollected
5 ty Colleges
2 ty Colleges
4 Schools
74
South Central Kansas WIRED Initiative Composites Kansas Final Report
34
The WSU Center for Entrepreneurship was allocated $319,500 of WIRED funding to support Kansas Entrepreneurial Initiative (KEI) and development of a high school business plan competition to complement the Shocker Business Plan competition. The KEI is a program for senior and graduate level college students to evaluate and manage emerging technologies through analysis of market potential, new-venture feasibility and new-venture launch requirements. WIRED funding was used to hire a staff member and graduate assistant to expand the current program and develop public programs and symposiums for the entrepreneurial community. Kauffman Foundation FastTrac© NewVentureTM and GrowthVentureTM (certified non-traditional experiential learning with hands-on coaching) programs were offered twice annually. Over the last two years, 63 entrepreneurs participated in the FastTrac© programs to either work on their small business or explore the potential of a new business idea. The KEI also developed Practical Entrepreneur Training Tools - - weekly lunch and learn training sessions designed and conducted by WSU entrepreneurship faculty. Topics included: Creating Business Plans that Sell, Guerrilla Marketing, The Employee Factor, Mastering Financial Statements, Advertising and Promotion During a Recession, etc. More than 20 sessions were developed and more than 180 entrepreneurs and students have participated. The high school business plan competition is designed to encourage student innovation and venture creation by providing a forum to present new business ideas to local business community leaders, including entrepreneurs and investors. The first annual high school competition was held in May 2010, and more than twelve students participated in the Competition with prize money was awarded to three high schools. The Business Plan Competition provided access for high school students to the Shocker Business Plan Competition and encouraged private sector sponsors to maintain the high school competition in subsequent years. The upgrade in technology in Devlin Hall added capacity to provide and administer public programs to local entrepreneurs. The installation of the new technology, allows for the Center to provide the following programs:
FastTrac® NewVenture™ FastTrac® GrowthVenture™ Entrepreneur Development Training Programs Practical Entrepreneur Training Programs
The following items were included in the upgrade: audio visual equipment, projector screen and hardware. The overall upgrade of technology provided program participants the tools to present their business and technology concepts in a peer group setting. In upgrading the technology it provided us the opportunity to offer group coaching and feedback about concepts presented and the viability of those technologies. As a result of the WIRED funds these group learning experiences were enhanced with the technology upgrade through improved communication and upgraded presentation tools. In addition; guest speakers were now able to access resources on the internet and illustrate specific examples of entrepreneurial resources available to program participants. It also allowed us to expand training to offer multiple participants at a single location critical information to maximize training time and limit the hours they are away from their businesses. Practical Entrepreneur Training Tools were designed to better leverage business strengths in today's dynamic economic times. We identified that many of the business owners and entrepreneurs were searching for answers, solutions and tools to assist these needs. A concept was to create and offer a three hour intense training sessions to deliver tools for the entrepreneurs or business owner to walk away with
South Central Kansas WIRED Initiative Composites Kansas Final Report
35
and directly apply to their business or developing technology. In developing these we have recognized time constraints and economic pressures weigh heavily on the training entrepreneurs can pursue. Offer on Fridays from 11:00 to 2:00, as a working lunch seminar on specific identified topics. It has also helped us in identifying those entrepreneurs and business owners who need further detailed training and coaching in particular those participants who are considering launching a new business. Whether a start-up or established business, these programs have provided participants with the skills and knowledge to succeed. Talent Development: Conference Narratives Global Consortium of Entrepreneurship Centers, October 2-4, 2008, Tucson, AZ The conference featured sessions on Social entrepreneurship – center roles in advancing alternate values in ventures, Roles and contributions of academic outreach, Leveraging teaching growth Opportunities across institutions, Innovation: pumping up your creativity, Identifying opportunity in technology driven market evolution in addition; to various others outlined in the conference schedule. The intent of GCEC organization is to provide a coordinated vehicle through which participating members can collaborate and communicate on the specific issues and challenges confronting university-based entrepreneurship centers. National Collegiate Inventors and Innovators Alliance (NCIIA), March 18-21, 2009, Alexandria, VA The NCIIA is a community of the leading thinkers in technology innovation and entrepreneurship in universities and colleges from around the country. The NCIIA brings together large and small institutions, including:
• Research institutions with active technology transfer programs. • Colleges exploring the teaching of applied innovation. • Engineering schools and business schools committed to offering their students more creative,
hands-on experiences.
C2ER The Council for Community and Economic Research, June 4-5, 2009, Kansas City, MO The focus of the conference was geared towards developing strategies to promote entrepreneurship and successful small business growth. The outcome projected in the 2.2 Kansas Entrepreneurial Initiative is to strengthen the ability of entrepreneurs to make critical decisions and become equipped with knowledge and skills. In attending this conference we were exposed to a variety of technology and data which in turn can become resources for our local entrepreneurs to utilize in their decision making. We recognized several companies and organizations which track and measure entrepreneurial growth. Identifying high potential high growth firms through the various tracking methods in our market will be advantageous in designing programs to meet their training needs. Global Consortium of Entrepreneurship Centers, October 14-18, 2009, Houston, TX Participants shared best practices in entrepreneurship education and entrepreneurship center development. The GCEC is the premier global organization for university-based centers of entrepreneurship. It has become the primary vehicle by which top entrepreneurship centers work together to share information, best practices, develop programs and initiatives, and collaborate and assist each other in advancing, strengthening, and celebrating the contributions and impact of university entrepreneurship programs. The Association of Collegiate Entrepreneurs October 22-24, 2009, Dr. Skinner, Chicago, IL Kansas City Chamber of Commerce Innovation meeting 2009, Kansas City, MO Kansas MarketPlace Conference, November 9-10 2009, Hays, KS The conference focused on small business ownership and to explore opportunities in entrepreneurship. The aim was to nurture dreams to create stronger rural communities. The conference was hosted by The Center for Rural Affairs and the Kansas Department of Commerce.
South Central Kansas WIRED Initiative Composites Kansas Final Report
36
National Business Incubator Association (NBIA), April 19-22, 2009, Kansas City, MO The conference featured sessions on incubator sustainability, new federal policies relating to incubators, client coaching, client selection policies and more. NBIA advances the business creation process to increase entrepreneurial success and individual opportunity, strengthening communities worldwide. NBIA serves as a clearinghouse of information on incubator management and development issues. Annual Conference on Management, Executive and Professional Development Programs, November 19-23, 2009, Phoenix AZ Conference is geared towards directors, program managers and coordinators, business development and marketing managers, and other key staff in four-year colleges and universities. The idea is to network with peers from across the U.S. and Canada, as well as Australia, U.K. and other countries in addition to meeting the needs of all levels of experience, there are keynotes and sessions ranging from senior level strategy to operational nuts and bolts and technology. National Collegiate Inventors & Innovators Alliance, March 25-27, 2010, San Francisco, CA Travel to the The14th Annual meeting with the National Collegiate Inventors & Innovators Alliance. The conference focus was: Open to learning and sharing geared towards technology innovations designed to improve people’s lives around the world and commercialization of student ventures. The Association of Collegiate Entrepreneurs (ACE), March 15-19, 2010, San Francisco, CA Travel to San Francisco March 15th-19th, 2010 The Association of Collegiate Entrepreneurs (ACE) student members’ toured Silicon Valley companies and met with top executives to learn about cutting edge technologies under development. Dr. Pett, Dr. Broberg and Danielle Hayes escorted the student group to California. Travel to Global Entrepreneurship Week/USA Partner, June 8-9, 2010, Kansas City, MO The meeting was hosted by the Ewing Marion Kauffman Foundation and the Global Entrepreneurship Week/USA in order to facilitate planning for the upcoming entrepreneurship week. Dr. Tim Pett and Danielle Hayes attended. Travel to the International Conference for Small Business, Cincinnati, OH The focus of the conference was Bridging Global Boundaries in order to form an international business community abundant with new ideas, knowledge and passion.
South Cen
InitiativWichita
WIRED FProgram
a. Prde
b. RK
AdditionaAcquired CompositDevelopeWorked wenlisted thKSBDC sAttended Conferencmeeting aCounties
PerformaDetail by
Strategic PConsultatTotal NarrativeThe Kansfor 19 strawere likel The strateanalysis. of two or
tral Kansas W
e 2.4 SmalState Unive
Funding: $ 1s/Products/Provide consulevelop new m
Review resourKansas WIRED
al WIRED Wmarket resea
tes Market 20d a resource g
with key indivheir assistanceservices. October Socice and made a
as outreach to Served: Butl
Re
ance Summa Services
Planning ion and Train
e: sas Small Buategic planninly to migrate
egic planning Then, compamore days an
IRED Initiative
ll Business Sersity, Kans
113,427 Project ltation and tra
markets in em
rce needs for KD goals and m
Wins/Outcomrch to assist c
009-2014: Maguide for comviduals with se in identifyin
iety for the Aa presentationidentify parti
ler, Cowley (eno, Sedgwick
ry
ning
siness Develong processes into the targe
process begaany leaders pand engaged in
Support sas Small Bu
aining to higherging cluster
KSBDC to mmake adjustm
mes: composite comaterials, Markemposite technosignificant expng and conne
dvancement on during the Nicipants for se1 firm), Harpk (25 firms),
opment Centwith growing
et sector comp
an with an initarticipated in n SWOT or V
37
usiness Dev
Leverage:
h-potential firmr.
meet Compositments as neede
mpanies in thets and Technology companperience in thcting with co
of Material anNovember Wiervices.
per, Harvey, KSumner (2 fir
ter (KSBDC)g composite apanies.
tial assessmen8-12 hours of
Value Chain A
velopment C
: $1,216,712
rms to
te ed
heir strategic pnologies” fromnies. he composite mpanies mos
nd Process Enichita Manufa
Kingman (1 firms)
) was allocateand/or advanc
nt, which inclf strategic pla
Analysis depen
Composites
Center
Goal Ini
connections wfi
As nee
planning effom Lucintel.
and manufactst likely to ben
ngineering (Sacturer's Asso
irm), Marion,
Number Participa
86 21
107
ed $133,427 iced materials
luded financianning workshnding upon th
Kansas Final R
Outcotiate with
firms
29
eded 1
rts – “Global
turing fields anefit from
SAMPE) ociation (WM
, McPherson,
of ants
Numof Fir
112
in WIRED funcompanies th
al and markethops over a phe company n
Report
omes 9
1
and
MA)
mber rms
19 10 29
nds hat
t period needs.
South Central Kansas WIRED Initiative Composites Kansas Final Report
38
The KSBDC provided a confidential action report to the company based on the planning process. Follow-up was also provided by the KSBDC as part of the cost of the strategic planning exercise. KSBDC staff members also provided consultation and training to 10 high-potential firms to facilitate the launch of new businesses in the composites and advanced material cluster. They provided individual consultation services and training in areas that include business plan development, strategic planning, market research, marketing plan development, financial projections development, cash flow analysis, operational efficiency, human resources, and other business management matters. More companies expressed interest in strategic planning process assistance but could not be accommodated prior to the end of the grant period. KSBDC will use the processes and tools developed as part of the grant to continue working with these and additional companies. At the inception of the grant, the WSU KSBDC received instructions not to initiate contact with companies to discuss their services. Instead, they were instructed to wait for referrals. In theory, the idea of designating a single representative to interact with companies on behalf of the WIRED grant had merit. However, in practice, KSBDC received only one referral during the course of the grant. This restriction prevented KSBDC from providing services to area companies for the majority of the grant and resulted in redistribution of funds. Finally in mid-2009, KSBDC received permission to contact companies directly. KSBDC developed a strategic approach to position their program so that they could best meet the needs of area composite businesses and best target companies most likely to benefit from their services. Initial conversations with company owners indicated an interest in strategic planning and revealed a dearth of available market research specific to the composite field. As a first step, KSBDC searched for market research that would assist composite companies in their strategic planning efforts. After extensive investigation, they purchased “Global Composites Market 2009-2014: Materials, Markets and Technologies” from Lucintel with WIRED funds. Next, KSBDC developed a strategic planning process and supporting material. Finally, they worked with key individuals with significant experience in the composite and manufacturing fields and connected with several companies interested in their services. As it became evident that more companies wanted services than KSBDC could accommodate before the end of the grant, they stopped promoting their services and identified an appropriate number of companies to assist with grant funds. KSBDC planned to report on economic impact generated by the companies they assisted under the WIRED Grant and developed metrics accordingly. However, they will not receive information about most of the economic impact until after the close of the grant. For this reason, they developed a strategic planning process survey to gather information for a second set of metrics. Survey responses showed that the companies clearly benefited from the strategic planning process. Of the 22 survey respondents, 21 indicated that they clarified the outcomes that their company would like to achieve as a result of the strategic planning process, and 20 indicated that they identified strategies that will enable their company to achieve desired outcomes. All respondents indicated that they are likely to begin a new process or take action that may result in increased company sales over the next three years. When asked what areas of their business they believed will be impacted by the strategic planning process, 17 responded “increased revenues” and 10 each responded “reduced costs” and “improvement to core processes.” Complete survey results are available as a part of the WIRED grant report.
South Central Kansas WIRED Initiative Composites Kansas Final Report
39
As KSBDC connected with business owners, it became clear that many exploring the composite field or expanding their work in composites would welcome and benefit from strategic planning assistance. WIRED grant funding enabled the KSBDC to provide support to some of these companies, and they will continue to provide support after the end of the grant. The WSU KSBDC serves a 24-county region with a small staff. Without WIRED funding, it will be a struggle to devote sufficient time to composite companies. However, the opportunity to acquire composite-specific market research and to develop a strategic planning process and tools with WIRED grant funding will position KSBDC to more easily provide the assistance needed.
South Cen
InitiativResearchWichita
WIRED FPrograma. Develb. Projec
new trc. Purchd. Projec
new re. Attenf. Projec
educag. StudeAdditionaOnline Cohttp://wwNon-destrComplemFDA ClasSupportinCounties
PerformaDetail byCourse
Non-destrNon-destrSummaryNon-destrTotal
tral Kansas W
e 2.5 Natioh (NIAR) State Unive
Funding: $1,s/Products/Plop and delivected number oraining curric
hase essential cted number oresearch equipd professionacted number oators attendedents trained inal WIRED Womposites Maw.niar.wichitructive testing
mentary Agenss 1, 2, and 3 ng Bombardie
Served: ButlSum
ance Summa Course
ructive testingructive testingy by Course ructive testing
IRED Initiative
onal Institut
ersity
,043,100 Project er training cuof students thcula. research equiof students thpment. al developmenof students th
d professional n NDT courseWins/Outcomaintenance Teta.edu/media/wg courses. ncy Outcomedevice propo
er Learjet’s deler, Cowley, H
mner
ry
g, series of 11g, series of 11
g (2)
te for Aviat
urricula. hat will be trai
ipment. hat will be trai
nt and scientihat will be trai
developmentes. mes echnology couwebcourse.as
es osals for CiBOevelopment oHarper, Harv
1 courses 1 courses
40
ion
Leverage:
ined annually
ined annually
fic symposia.ined as a resut and scientifi
urse is availabsp.
OR. f the Model 8ey, Kingman,
Dates
SeptemberJanuary 20
: $ 2,335,000
y as a result o
y as a result o
. ult of fic symposia.
ble at
85 composite , Marion, Mc
r 2009 010
Composites
Goa
f
f $349,10
1
18
business jet. cPherson, Ren
Total Number o
ParticipantCertificate
8 10
18 18
Kansas Final R
al Outc
0
0
7
$41
no, Sedgwick
of ts/ es
NumbeWIRE
ParticipCertific
54
99
Report
comes11
600
9,918
240 8
57
198
, and
er of ED pants/ cates
South Central Kansas WIRED Initiative Composites Kansas Final Report
41
Course Dates
Tot
al
Num
ber
of
Part
icip
ants
N
umbe
r of
W
IRE
D
Part
icip
ants
Geographic Breakdown
Non-destructive Test September 2009 18 5 Cowley – 1(5.88%), Harvey – 2(11.77%),
Sedgwick – 14(82.35%) National Institute for Aviation Research: Training Support for Manufacturing and Maintenance of Advanced Materials Additional Highlights The online Composites Maintenance Technology course was offered twice – once in March and again in May. Information about the course is available at http://www.niar.wichita.edu/media/webcourse.asp. The course had eleven participants in March and five in May. All completed the course. The Nondestructive Test (NDT) Training Lab was located at the Wichita Area Technical College’s Comotara campus. It is now located at the National Center for Aviation Training. The NDT Training Lab educates students in NDT technologies including:
– Penetrant Inspection – Magnetic Particle – Materials and Processes – Radiography
– Eddy Current – Ultrasonic I – Visual Inspection – Bond Testing
The program, offered through Wichita Area Technical College, provides students with the option to select individual courses as needed. Students also have the option to obtain intro and advanced Certificates of Completion by taking a predetermined set of courses. The week-long courses are instructed by employees of Wichita State University’s National Institute for Aviation Research. Laboratory equipment includes:
• Sonic 1200M Ultrasonic A-Scan units (8) • Nortec 500D Eddy Current Units (8) • Omniscan phased array units (3) • Lorad 160 KVP X-Ray unit (1) • Sonic Bondmaster (3) • NDT Automation C-Scan unit (1)
• Table top film processor (1) • Kodak Computed Radiography (1) • Magnaflux ADH 2045 Magnetic Particle (1) • Magnaflux 1633H Penetrant Unit (1) • Parker DA-400 portable Magnetic Particle (3)
Firms receiving training and process support from NIAR include Ametek, B&S Aircraft, Boeing IDS, Bombardier Learjet, Cessna, Fiber Dynamics, Hawker Beechcraft, Leading Technology Composites, Spirit Aerosystems, etc. April – June 2010
• A new Digital Radiography instrument was purchased in April and is fully functional. • NCAT has received both autoclaves, installation is ongoing. Two new walk-in ovens, to be paid
for with local funds, have been specified and put out for bid. Lab fixtures are specified, bidding process to start soon.
• The online Composites Maintenance Technology course was offered twice – once in March and again in May. Information about the course is available at http://www.niar.wichita.edu/media/webcourse.asp. The course had eleven participants in March and five in May. All completed the course.
South Central Kansas WIRED Initiative Composites Kansas Final Report
42
• The Nondestructive Test (NDT) Training Lab that was previously located at the Wichita Area Technical College’s Comotara campus is now located at the National Center for Aviation Training.
• NIAR supported CiBOR and a new orthopaedic company (which is being incubated at WSU) with engineering design services. CiBOR also has several proposals out to major device manufacturers and the DOD for orthopaedic research in the area of material changes (metallic to composite)
January – March 2010 • New NDT course curriculum is being developed with start dates of:
o Fall 2010 for Phased Array o Spring 2011 for C-scan and Computed Radiography o Summer 2011 for predictive Maintenance AAS Programs
• The panel fabrication of Bombardier Learjet’s Model 85 business jet and FAA conformity are complete with testing being 35 percent complete. Seven risk reduction projects are continuing, with four producing data. Full scale testing activities have increased with load placement, waffle tree design, and test configuration.
• The qualification testing of the Bombardier C-series is complete. A final report is due May 7, 2010.
October – December 2009 • The second 11-week NDT training course was completed. Class size averaged 13 persons.
Student feedback on the course material has been incorporated into the curricula and the third course will begin in early summer 2010.
• CiBOR was supported with three more design inquiries from a major medical device manufacturer. The proposals include FDA class 1, 2, and 3 devices. Contracts for all three devices are in discussion for further development.
• The majority of the material qualification testing for the Bombardier C-series airplane design has been initiated.
• The Fall Technical Conference and Exhibition for the Society for the Advancement of Material and Process Engineering (SAMPE) was held during the quarter drawing 1,372 attendees. The conference included six panels, two keynote lectures, and 175 paper presentations in 41 sessions. NIAR provided personnel including three conference chairs, three session chairs and a dozen volunteers as well as sponsoring a booth at the exhibition and offering an afternoon tour of its facilities.
July – September 2009 • NIAR NDT courses have begun at the WATC Comotara facility with capacity of training 20
students per class. There are 11 different classes each running for five day/one week for the different NDT methods. NDT lab equipment has been delivered and most of it has been set up.
• CiBOR was supported with two design proposals from a major medical device manufacturer that span FDA class 1 and 3 devices.
• Began material qualification for the Bombardier C-series airplane design. • Defining training room and lab equipment needs with NCAT facility directors. Sedgwick County
construction funds are available for most training infrastructure. $225,259 of equipment and supplies for the NDT lab have been purchased.
April – June 2009 • An experienced Materials and Process engineer was hired to enhance composite lay-up and
process capability at NIAR. This person will support the WIRED sponsored composite training courses and industry requests and will eventually transition to support research and training at the NCAT facility.
• Supported the Kansas Career Pipeline composite videos by featuring NIAR employees and facilities and explaining the benefits of and applications for composite materials.
South Central Kansas WIRED Initiative Composites Kansas Final Report
43
• Strength testing of one part of CiBOR fabricated composite operating tool prototypes exceeded expectations. Improved materials will be acquired and Phase II parts will be fabricated.
• Interim lab facilities are being modified to accept NDT training equipment that has been ordered and has begun to arrive. Curricula for the NDT courses are ready and has student enrolling for fall.
January – March 2009 • A retired experienced Air Force NDT engineer was hired to develop the curricula and define
equipment needs for the NDT program. NDT equipment has been purchased and approved by the DOL.
• Seven investigations ranging from Class I to Class II FDA devices are underway with Dr. Wooley from CiBOR leading the effort. NIAR is helping with stereo photography strain measurements to reduce stress concentrations on bones cut during surgical procedures.
• Supporting Bombardier Learjet’s development of the Model 85 business jet with material selection for the all composite jet.
July – September 2008 • Eight NIAR employees were trained on how to use MTS TestWorks software and will use their
knowledge to train others in software. • Supported pre-work in the biomaterials area while waiting for a response from the Kansas
Bioscience Authority on the biomaterials center proposal. NIAR used a scanning electron microscope to characterize the surface of a polymerized bone supplied by Dr. Wooley who will then attempt to grow cells on the bone. NIAR will SEM the pieces again.
• A high level definition of resin requirements was submitted to Pittsburg State University to formulate an idea for using composites to splint traumatic bone fractures.
• Three NIAR employees attended the NBAA in Orlando this month to support the Kansas region booth.
April – June 2008 • Royal Lovingfoss began at NIAR on June 23 as a Polymer Engineer. He will start benchmarking
industry issues to identify areas that offer the most value in timing and rework expense. • An acquisition timeline has been completed for NDT equipment needs. A detailed description
and cost estimates will be submitted to the DOL after the NDT instructor is hired. January – March 2008
• Searched for and identified a Polymer Engineer candidate. • A joint proposal with ORI and other state partners was made to the Kansas Bioscience Authority
for a biomaterials center of excellence. Five local composite manufacturers were visited with Dr. Wooley to introduce him to their capabilities and outline the vision for medical device manufacture in the region. Troy Carlson followed up the effort with a SWOT analysis.
• Styker representatives visited with Via Christi ORI representatives to begin discussion on the bio-composites initiative.
• WATC and NIAR have established the equipment needed to support a portion of composite training at the NCAT building. A summary and justification will be submitted to the DOL.
South Cen
InitiativGreater WIRED FPrograma. Incumb. Attenc. PresenCounties
CompositEmployer AdditionaApril – Ju
• CatOcoCRPrpr20inshco
January –• A
Stexfo
October –• A
wCofbeprne
tral Kansas W
e 3.1 CompWichita Ec
Funding: $70s/Products/P
mbent worker dees at Compntations at CAServed: Butl
Su
tes Advisoryrs
al Detail: une 2010
Composites Wttendees inclu
Officer; CiBORovered how lo
CiBOR. Dr. JoResearch) – co
resident; WArograms to be010. Vicki Pnitiatives and hows, promotomposites-rel– March 201
A CAB meetintephen Nolet,xpert in compormat will be – December
A CAB meetinwell attended bCiBOR. GWE
f an upcomine held on Januresenter, Tomext CAB mee
IRED Initiative
posites Advconomic Dev
0,050 Project
training posites AdvisoAB meetings ler, Cowley, H
umner
y Board: Coo
Workshop (CAuding six GWR – National ocal compositohn Tomblin
overed FAA cATC – Wichitae offered at thratt Gerbino (invited region
ted participatilated IDEA vi10 ng is set for M, a Principal Eposite wind tua heavily ma2009
ng was held oby 28 individuEDC staff repg event, the Suary 14, 2010
m Tran, from Aeting.
visory Boardvelopment C
ory Board (C
Harper, Harv
ordinating a C
AB Meeting) hWEDC Staff. P
Center of Inntes manufactu(Executive D
composites repa Area Techn
he National C(President; Gnal compositeion in Compoisits resulted
May 13, 2010 Engineer and urbine blade marketed 2 – 3 h
n October 26uals. Dr. Woorted on the S
South Central0. GWEDC iAeroStrategy
44
d (CAB) Coalition
Leverage:
CAB) meeting
ey, Kingman,
Cluster of Co
held May 13, Presenters wenovation for Burers consider
Director; NIARpair training i
nical College)enter for AviaWEDC) – coes firms to joi
osites Firm Difrom Survey
at the WichitDirector of In
manufacturinghour worksho
6 at the Wichitooley, John MSAMPE TechKansas Winds in the proce
y Aviation Ma
: $ 432,016
gs
, Marion, Mc
omposites an
2010, at Wicere: Dr. Paul WBiomaterials iring diversifiR – National initiative, etc
) – covered coation Trainin
overed GWEDin GWEDC airectory & Seand/or verbal
ta Hyatt Hotennovation wig with also anop.
ta Chamber oMoore, and Tohnical Conferd Energy Supess of determianagement Co
Composites
Goa$5,66
181
cPherson, Ren
nd Advanced
chita Hyatt. SWooley (Chiein Orthopaedcation can geInstitute for A
c. Ray Frederomposites-relng (NCAT) whDC compositeat compositesearchable Datlly expressed
l with primarth TPI Comp
n aerospace b
of Commerceom Aldag provrence and the pply Chain Wining the avaionsulting befo
Kansas Final R
al Outcome6 0 2
$
no, Sedgwick
d Materials
Seventy-one ef Scientific ic Research) –
et involved wiAviation rick (Interim ated training hen it opens Fes outreach s-related tradetabase, etc. Fid interest.
ry presenter posites, who isackground. T
building. It vided an updaNBAA and s
Workshop that ilability of theore they set th
Report
es $5,780
166 16
, and
– ith
Fall
e ive
s an The
was ate of poke will e he
South Central Kansas WIRED Initiative Composites Kansas Final Report
45
July – September 2009 • A CAB meeting was held on July 8 at the Wichita Chamber of Commerce building. It was well
attended by 16 individuals. Jon Christner of eServ presented on “The Role of Technical services in the Emerging Economy”. Tammy Nolan, GWEDC, briefed attendees on composites oriented trade shows and upcoming outreach opportunities. A status report on the Composites firm Directory and Searchable Database was given. Feedback on useful modifications was received and methods of promoting participation were discussed.
April – June 2009 • Vicki Pratt-Gerbino attended a local SAMPE Chapter meeting to discuss merging CAB with that
organization. The conclusion was that SAMPE has a more technical nature than the CAB meetings.
January – March 2009 • A CAB meeting was held on January 21 at the Wichita Chamber of Commerce with 11 in
attendance. Tammy Nolan displayed a draft regional composites brochure/folder that is almost complete. Additional photography is requested for the brochure/folder. Information on 2009 trade show outreach opportunities and a status report on the Composites Firm Directory and Searchable Database were provided.
October – December 2008 • A CAB meeting was held on November 12 at the Wichita Workforce Center with 13 in
attendance. Debra Teufel presented an economic development incentives overview. Tammy Nolan presented information on trade show outreach opportunities and Composites Firm Directory and Searchable Database.
July – September 2008 • A CAB meeting was held on July 29 at the Wichita Chamber of Commerce with 27 in attendance.
Andy Solter with the Kansas Career Pipeline made a presentation regarding the KCP’s concept and website. Vicki Pratt Gerbino briefed attendees on development and the intended outreach uses of the Composites Firm Directory and Searchable Database.
January – March 2008 • A CAB meeting was held on January 16, 2008, with discussion of the WIRED initiative. • A CAB meeting was held on March 12, 2008. John Tomblin, Executive Director of WSU
National Institute for Aviation Research, presented on the NIAR facilities planned for the National Center for Aviation Training (NCAT) facility and provided an update on the status of the Center of Innovation for Biomaterials in Orthopaedic Research (CiBOR).
South Cen
InitiativMateriaCommuGreater WIRED FPrograma. Stakeb. Incumc. Attend. Attene. Develf. Compg. Visit h. Total AdditionaAn incentemploymeinvestmenAn incentemploymecapital invAn incentrepresentiComplemGWEDC were heldCounties
Regional Commun April – Ju
• RatprMofco
tral Kansas W
e 3.2 Regiols Developmnication Wichita Ec
Funding: $ 9s/Products/Pholders attend
mbent worker d compositesdees workinglop compositeposite and advand interviewcomposite real WIRED Wtive agreemenent by 18 ovent in new facitive agreemenent by 80 jobvestment in ntive agreemening $42 millio
mentary Agenstaff sponsor
d locally, natioServed: Butl
Su
Composite anication: Add
une 2010 Regional Renettended (inclurofessionals,
Manufacturingf regional comomponents. S
IRED Initiative
onal Compoment Strateg
conomic Dev
98,200 Project ding compositraining.
s and advanceg events. e and advancevanced materi
w composite aelated audiencWins/Outcomnt in March 2er two years relities and equ
nt in January 2s over three y
new facilities ant in August 2on annually inncy Outcomered several traonally, and inler, Cowley, H
umner
and Advanceditional Deta
ewable Energyuding 4 GWEutility represe
g Institute (AMmpanies consSuch compon
osite and Adgies & Stake
velopment C
ites short cou
ed materials re
ed material prial related WI
and advanced ce reached.
mes 2010 with Spaepresenting $
uipment. 2010 with Ai
years represenand equipmen2008 with Spin payroll and es ade shows as wnternationallyHarper, Harv
ed Materials ail (many of t
y Task Force EDC Staff). Aentatives, etc.MI) wind eneidering transi
nents could ve
46
dvanced eholder
Coalition
Leverage:
rse.
elated events.
rospects. INS. material relat
artech Corpor$3.26 million
rbus North Anting $10 millnt. irit AeroSyste$262 in new
well as attend. ey, Kingman,
Developmenthese outcome
Meeting (ApAttended by re. The meetingrgy componeition or diversery well be co
: $ 432,016
.
ated firms.
ration to retaiannually in p
America Enginlion annually
ems to expandfacilities and
ded, exhibited
, Marion, Mc
nt Strategies es were funde
pril 29, 2010, egional econog primarily fo
ent “supplier psification intoomposites-bas
Composites
Goa4
$28,0027
25
236
in 75 jobs andpayroll and $4
neering Centey in payroll an
d employmend equipment.
d, and worked
cPherson, Ren
and Stakehoed from local
at Wichita Comic developmocused on thepotential” teco wind energysed. Various
Kansas Final R
al Ou0 0 2 1 3 3 1 5
$
d expand 4.0 million in
er to expand nd $2.5 millio
nt by 700 jobs
d 25 trade sho
no, Sedgwick
older funds)
hamber) – 16ment e Advanced chnical assessmy generation means to ass
Report
utcomes38
$28,000 25 83
250 3
23 731
capital
on in
s
ows that
, and
6
ment
ist
South Central Kansas WIRED Initiative Composites Kansas Final Report
47
firms in funding these assessments were discussed – and follow up assignments issued. Summary project report will be issued regionally.
• SAMPE 2010 Spring Conference & Exhibition (May 18-20, 2010 / Seattle WA) – GWEDC staff (2) walked event (no booth). Five (5) composites-related prospects developed.
• WindPower 2010 Conference & Exhibition (May 23-26 / Dallas TX) – GWEDC staff (3) walked event and helped staff Kansas Department of Commerce booth. Five (5) composites-related prospects developed.
• MDM East (Medical Device Manufacturing) Trade Show (June 8-10 / New York City NY) – GWEDC staff (2) walked event (no booth). Seven composites-related prospects developed.
• GWEDC attended May 25, 2010, local SAMPE Chapter meeting. Program was two technical presentations – “Non-Metallic Composite Sandwich Structures” and “Summary of SAMPE Seattle Technical Presentations.” No firm economic development prospects developed – but served to maintain continuity of contact with regional composites firms.
January –March 2010 • The South Central Kansas Wind Energy Supply Chain Workshop was held at the Wichita Hyatt
Hotel on January 14, 2010. GWEDC, KDOC, and 15 other companies sponsored the event that drew 220 attendees. Eighty percent of attendees were manufacturers/small business owners interested in the wind energy equipment manufacturing supply chain. Great Lakes WIND Network (GLWN) presented.
• A Regional Partner meeting was held on January 22 at the Wichita Chamber with 22 in attendance.
• A Regional Renewable Energy Task Force meeting was held on March 11 at with Wichita Chamber with 19 in attendance. GLWN is working with Siemens Energy to assist with regional supplier development for the new Siemens facility under construction in Reno County. GLWN contracted with Advanced Manufacturing Institute at Kansas State to provide “supplier potential” technical assessments of regional companies.
• Staff attended local SAMPE chapter meeting in March on composite cutters. • GWEDC announced an agreement with Airbus North America Engineering Center to increase
employment by 80 engineering jobs over three years at average annual pay of $126,000 and capital investment in new facilities and equipment of $2.5 million.
• GWEDC announced an incentive agreement with Spartech Corporation to retain 75 existing employees and expand employment by 18 new jobs over two years with average annual pay of $35,000 and capital investment in new facilities and equipment of $4.0 million.
October – December 2009 • Kansas Wind Energy Supply Chain Workshop was held in Topeka, Kansas in October 5, 2009.
GWEDC was one of numerous sponsors. Information was provided to evaluate the potential to transition/diversify into the wind energy equipment supply chain.
• The SAMPE Fall Technical Conference and Exhibition was held at Wichita Century II in October. GWEDC exhibited regional composites industry using WIRED funded composites trade show supplies. GWEDC, Wichita Chamber, and Sedgwick County ED staff worked exhibit and show floor.
• The National Business Aviation Association (NBAA) Annual Meeting and Convention was held in Orlando, FL in October. GWEDC staff, regional ED partners, and a private sector representative worked the exhibit and trade show floor. Ten composite related ED prospects developed.
• GWEDC staff conducted four composites firm visits/interviews as part of IDEA program. • Staff attended local SAMPE chapter meeting in December on Boron Cage Compounds. • A Regional Partner meeting was held in October with 20 in attendance.
July – September 2009
South Central Kansas WIRED Initiative Composites Kansas Final Report
48
• GWEDC attended the Exposure 2009 trade show in September and exhibited regional the composites industry. GWEDC also attended and worked the Composites World Expo 2009 in Schaumburg, IL from September 29 through October 2. Twelve composites related ED connections were made at the Schaumburg show.
• GWEDC staff conducted six composites firm visits/interviews as part of IDEA program. • GWEDC President attended September local SAMPE Chapter meeting on “Lessons Learned
from Adam Aircraft Certification Programs”. • Utilized regional composite cluster data contained in recently updated WIRED Regional Asset
Map to service information requirements of composites firm recruitment prospect. • A Regional Partner meeting was held in July with 18 in attendance.
April – June 2009 • GWEDC attended and exhibited at a number of trade shows this quarter. GWEDC staff attended
the Composites Manufacturing 2009 show in San Diego, CA at the end of April and worked the show floor. GWEDC assisted with staffing at the Kansas Department of Commerce booth at the Wind Power 2009 trade show in Chicago, IL in May. Sixteen composites related prospects were established at the San Diego trade show and 10 composites related prospects were developed at the Chicago show. The SAMPE Annual Convention 2009 was held in Baltimore, MD in May; GWEDC exhibited and developed four composites related ED prospects. GWEDC also worked the show floor and assisted with staffing at the Kansas Bioscience Authority booth at the BIO 2009 trade show in Atlanta, GA in May where three composites related prospects were developed. The BIO show featured the official CiBOR launch. GWEDC exhibited WIRED funded custom panels featuring regional composites industry assets at the Paris Air Show in Paris, France in June. Fifteen composites related prospects were developed during the show.
• GWEDC staff conducted three composites firm visits/interviews as part of the IDEA program. • GWEDC President attended the June local SAMPE Chapter meeting on composites material
aging effects. • A Regional Partner meeting was held at the Wichita Chamber building in July with 18 in
attendance. E-Pulse was rolled out to partners and FastFacility GIS System was overviewed. FastFacility is expected to be operational regionally in October.
January –March 2009 • GWEDC staff attended the Medical Design and Manufacturing trade show held in Anaheim, CA
in February. The staff worked the show floor and developed 10 composites related prospects. GWEDC also attended the JEC Composites Show in Paris, France in March where the staff worked the show floor and developed forty composites related ED prospects.
• Staff worked the Composites World Investment Forum conference in New York, NY in February. Five composites related ED prospects were established.
• GWEDC staff conducted four composites firm visits/interviews as part of the IDEA program. • David Bossemeyer attended the March local SAMPE Chapter meeting on the Composites
Material Handbook 17. • A Regional Partner meeting was held at the Wichita Chamber in March with 13 in attendance. • Staff completed the design of composites oriented trade show outreach supplies. The supplies are
under construction by Design Centre and delivery is planned on April 23, 2009. October – December 2008
• GWEDC and partnering organizations sent 23 people to staff the regional booth at the October National Business Aviation Association convention in Orlando, FL. Follow up with over 100 ED prospects developed at this event is ongoing.
• Staff conducted one composites firm visit as part of the IDEA program. • A Regional Partner meeting was held at Derby City Hall in December with twelve in attendance. • Staff attended the December local SAMPE Chapter meeting on carbon fiber surface chemistry.
July – September 2008
South Central Kansas WIRED Initiative Composites Kansas Final Report
49
• The aviation industry video was used extensively at the June Business Retention and Expansion International conference in Wichita and was also presented at the June Strategy 3 Implementation Team meeting.
April – June 2008 • GWEDC staffed a booth at the May SAMPE 2008 Trade Show in Long Beach, CA. Follow up
with ED prospects developed at the show is ongoing. • Completed regional aviation industry video covering highlights of the industry’s history and
evolving role of aerospace composites and advanced materials. January –March 2008
• The Resource Fair for regional economic development professionals and development agencies was held in February.
• A regional aviation video is being developed to highlight the cluster’s past, present, and future. The script has been outlined.
South Cen
InitiativMarket Greater WIRED FPrograma. Comp
regionb. Web h
databac. Regio
prospd. Firmse. Regiof. Regiog. Sites /h. Web h
Counties
Advanced April – Ju
• C(DcoRin
“EtodeG
January -• L
an
tral Kansas W
e 3.3 AdvaResearch Wichita Ec
Funding: $10s/Products/P
posites and adnal compositehits for onlinease.
onal economicect managem
s populating ponal EDOs traonal EDOs ad/ buildings pohits on GIS sy
Served: ButlSu
d Material an
une 2010 Competitive ADallas-based ompetitive an
Region to attrandustry sector
o Aerospo Medico Alterno Busine
Engineered Mo pursue withievelopment a
GWEDC rolle- March 201
Location Scound demonstra
IRED Initiative
anced Mater
conomic Dev
06,750 Project dvanced matees firm directoe regional com
c developmenment system. prospect manaained in GIS udopting GIS syopulating GISystem.
ler, Cowley, Humner
nd Polymer M
Analysis & Tacorporate site
nalysis and taract, retain andrs recommendpace Manufac
cal Equipmentnative Energy ess & Profess
Materials Resein first three t
and manufactud-out this stu0
ut (GIS Systemated to regiona
rial & Polym
velopment C
rials related fory and searcmposites firm
nt organizatio
agement systeuse. ystem.
S system regio
Harper, Harv
Market Rese
arget Industry e selection anrget industry d expand apprded for prioritcturing; t & Device MComponent M
sional Serviceearch & Manutargets. SSG uring capacitidy to both of
m) – System pal partners an
50
mer
Coalition
Leverage:
firms with enthable databas
m directory an
ons trained in
em regionally
onally.
ey, Kingman,
earch: Addit
Strategy – Gd economic dstrategy to heropriate existity economic d
ManufacturingManufacturines. ufacturing” arrecommends
ies in the fieldf its public and
previewed to nd broad comm
: $ 432,016
tries in onlinese.
nd searchable
use of
y.
, Marion, Mc
tional Detail
GWEDC retaindevelopment celp maximize ing and new bdevelopment
g; ng; and
re specificallys continuing pd of compositd private inve
local commemercial realto
Composites
Goae 7
8,95
1
5011
228,20
cPherson, Ren
ned Site Selecconsulting fir ability of Grbusinesses. Battention are
y cited as apppromotion of tes and advanestors on Apri
ercial realtor oor community
Kansas Final R
al Outc5
0
0
0 0 0 5 0 2
no, Sedgwick
ction Group Lrm) to providereater WichitaBroad target :
propriate funcregional resea
nced materialsil 8, 2010.
on January 4, y on January 8
Report
comes54
6,646
4
687 4
10 324
2,653, and
LLC e a
ctions arch, s.
2010 8,
South Central Kansas WIRED Initiative Composites Kansas Final Report
51
2010. There were 250 property web hits and four new properties and three additional realtor requests were received.
o Eight counties have submitted properties. o LocationScout utilization being promoted in print and on online trade publications.
October – December 2009 • Location Scout (GIS System) – System launched on GWEDC website December 8, 2009. All
basic Sedgwick County GIS layers are now operational with the exception of Homeland Security-sensitive utility infrastructure layers. FastFacility and GWEDC staffs are in the process of assisting area counties build system layers.
July – September 2009 • GIS System – The system was reviewed at the Regional Partners Meeting on July 10, 2009.
Once the testing of Sedgwick County is successfully completed GWEDC staff will begin asking the remaining WIRED counties for their GIS layers to FastFacility.
January - March 2009 • Composites Firm Directory and Searchable Database – An online survey has been emailed to
firms, approximately 100, identified in the WIRED asset map to populate the database with their information. The database will not go publicly online until substantially regional participation has been achieved. The design for brochures summarizing regional composites industry and serving as folders for database output has been completed.
October – December 2008 • Kris Shilt, Grant Thornton LLP, made a presentation about the importance of competitive state-
level credits and incentives that can be used for firm outreach and recruitment efforts. It showed possible improvements that would help make Kansas incentive programs more effective and competitive and the materials represented valuable market research pertinent to cluster development.
South Central Kansas WIRED Initiative Composites Kansas Final Report
52
Composites Kansas WIRED Selected Resource Directory: WIRED Implementation Plan WIRED regions integrate economic and workforce development activities and demonstrate that talent development can drive economic transformation in the regional economies. Asset Map Inventory of key resources that can be used to support the transformation and development of the composites and advanced materials cluster in south central Kansas. Survey of Composites and Advanced Materials Firms The purpose of the online survey was to provide a deeper understanding of the regional economy, indicate gaps that require further investment, and provide a baseline by which to judge future progress toward regional prosperity in composites and advanced materials. Social Network Analysis and Presentation WSU Center for Community Support and Research (CCSR) conducted a social network analysis of the active WIRED members. Project objectives included: a) identify network composition and key individuals within each employment sector (Education, Business, Government or Nonprofit), b) identify current and emerging leaders, mentors, and innovators in the composites industry in Kansas, and c) identify opportunities for network development. Strategic Plan In March 2010, a series of SWOT/strategic planning workshops were conducted by the Docking Institute to develop and coordinate a regional economic development strategy for composites and advanced materials. A total of 37 individuals participated; all 10 Composites Kansas counties provided input. The Innovation Center task force was an outcome of the strategic planning sessions. Composites Database, GWEDC website. Awards: US DOC EDA Excellence in Urban or Suburban Economic Development, finalist, May 2009 UEDA Excellence in Workforce Development, finalist, July 2009 Evaluations: September 2008, Public Policy Associates and Upjohn Institute
August 2009, Kansas Department of Commerce Workforce Compliance and Oversight Legal Services
October 2009, U.S. Department of Labor, Employment and Training Administration March 2010, Public Policy Associates and Upjohn Institute
South Central Kansas WIRED Initiative Composites Kansas Final Report
53
Evaluation of Generation III, Composites Kansas WIRED Four comprehensive program reviews of the Composites Kansas Initiative were conducted; all of the reports can be found on the WIRED website.
• In second quarter 2009, the Kansas Department of Commerce Workforce Compliance and Oversight Legal Service conducted a Programmatic Review.
• In September 2009, the United States Department of Labor (DOL), Employment and Training Administration (ETA) conducted an evaluation of the Initiative with a Review Report prepared for the Kansas Department of Commerce.
• The region had two visits from Kevin Hollenbeck, Upjohn Institute, and Nathalie Winans, Public Policy Associates (PPA). The DOL contracted with Upjohn and PPA to conduct evaluation of Generation II and Generation III WIRED grants.
o Our first site visit evaluation was conducted in September 2008. o Our second site visit evaluation was conducted in March 2010.
The final evaluation report includes data through December 2009 and states: “Despite the fact that one of the region’s major sectors is reeling—private aircraft—the WIRED initiative seems to have had a substantial (and lasting) impact on the talent development and economic development systems in the area. In the areas of talent development, for example, it has invested almost $600,000 in instructional equipment that will support about 700 additional postsecondary students annually. It has funded 30 new curricula that are projected to serve over 900 additional students per year. It has trained about 200 educators who will be able to instruct over 2,600 additional students in composites and STEM fields. Finally, it has funded incumbent worker training for almost 700 individuals, and has funded skill training for over 100 emergent workers at five postsecondary institutions. “In addition to its substantial investments in the education and training of individuals, the Composites Kansas region has used its resources to leverage the capacity of several institutions in the region. For example, it helped to support the CiBOR research center effort at a point in time that was crucial for its viability. Although interviewees indicated that only modest levels of WIRED resources were invested in this activity, CiBOR staff members suggested that these resources bridged a funding gap. These staff members opined that overcoming the funding gap facilitated CiBOR’s emergence as an outstanding research and development center that will likely grow into a substantial source of economic prosperity in the region. CiBOR is a new initiative. The National Institute for Aviation Research (NIAR) has been a long-standing asset at WSU. The role that WIRED played for it was to provide resources to substantially improve its capabilities in the area of composites. Specifically, the funding allowed an expansion of the NIAR staff by four individuals with expertise in composites and the purchase of NDT equipment for composites training purposes.” The draft report goes on to state, “The individuals who were interviewed during the course of the site visit were unanimous in their desire to see the Composites Kansas collaboration continue beyond its ETA funding base. Just prior to the site visit, members of the Leadership Team, Strategy Teams and other stakeholders had met twice in strategic planning sessions to plan for the Initiative’s sustainability. The site visit team was told that the Leadership Team has essentially made a commitment to continue Composites Kansas, although the funding and structure had not been worked out.”
South Cen
tral Kansas WIRED Initiative
54
Composites Kansas Final R
Report
South Central Kansas WIRED Initiative Composites Kansas Final Report
55
Composites Kansas WIRED Leadership Team * Also serves on the Executive Committee, ** Co-Chairperson
1. **Mark Conway, President/Owner Remediation Contractors, Inc., Mayor of Rose Hill, Chairman of Workforce Alliance of South Central Kansas, Butler County
2. **Mickey Fornaro-Dean, Executive Director, Harvey County Economic Development Council. Deputy Regional Commander – South Central District – Kansas Cavalry. Past President – Kansas Economic Development Alliance from Harvey County
3. * Caleb Asher, Deputy Secretary, Workforce Development, Kansas Department of Commerce, Mr. Asher replaced Ms. Davis in February 2009, and served through end of grant *Rae Anne Davis, Deputy Secretary, Workforce Development, Kansas Department of Commerce, start of grant through-February 2009
4. Ed Berger, President of Hutchinson Community College, Hutchinson Kansas. Member – State of Kansas Workforce Investment Board – KANSASWorks Board Reno County, Board Member, Local Area 1
5. Joe Carrithers, Research Operations Officer, Orthopedic Research Institute, Via Christi Research, Inc., Sedgwick County
6. Barbara Davis, Retired Engineering Supervisor, Cessna, President of Society of Women Engineers
7. *Darrell Dugan, Director of Business Development, Burnham Composites 8. *Sherry Gegen, Regional Director South Central Region, Kansas Department of Commerce,
Sedgwick County 9. *Janis Hellard, Director, Sumner County Economic Development Commission 10. Jim Keller and Eliese Holt, Circle USD 375 Superintendent: Butler County Superintendent 11. Earnest Lehman, President & General Manager, Midwest Energy, Inc., Vice-Chairman of
Kansas WorkforceONE 12. Jim Means, Executive Director, Secondary Career and Technical Education, Wichita Public
Schools, USD 259 13. Abel Perez, CEO, Hispanic Chamber of Commerce 14. Vicki Pratt Gerbino, President, GWEDC 15. *Kip Schmidt, Technology Development Director, Spirit 16. *Marty Shawver, Senior Associate Provost, Wichita State University, Sedgwick County 17. *Bonnie Sowers, Program Director, Hesston College of Nursing 18. Richard Taylor, Business Manager, Plumber and Pipefitters Apprenticeship Training of KS 19. *Paul Wooley, COO and or, Research Director, Orthopedic Research Institute, Via Christi
Research 20. Diane Wright, Chief Operating Officer, Wichita Area Technical College 21. Donna Wright, Vice President, Mid-American Minority Business Development Council 22. *Phil Wyssenbach, President of Hillsboro Industries, Inc., Hillsboro Development Corporation
– Vice Chairperson from Marion County 23. Andy Solter, President, Kansas Career Pipeline (Internet-based education and career planning
system), Sedgwick County 24. Keith Lawing, Executive Director, Workforce Alliance of South Central Kansas, serving
Sedgwick, Butler, Cowley, Sumner, Harper, and Kingman counties. All six counties are involved in the WIRED Initiative, Ex-Official member
25. Bob Dalke, Executive Director, Kansas Local Area I Workforce Investment Board. Local Area I is 62 counties covering 55,000 square miles of North Central and Western Kansas. Four counties from Local Area I are involved in the WIRED Initiative: Reno, Harvey, McPherson and Marion, Ex-Official member
South Central Kansas WIRED Initiative Composites Kansas Final Report
56
26. Debra Franklin, WIRED Project Support, Regional Labor Force Analyst, Wichita State University, Center for Economic Development and Business Research, Sedgwick County, Staff Member
Composites Kansas WIRED Implementation Teams Strategy 1, Education and Training Implementation Team
1. Tom Aldag, Director, Research and Development, National Institute for Aviation Research, Wichita State University, Sedgwick County
2. Barbara Brooks, Professional Placement Service, recruiter for composites industry 3. Rod Brown, Instructor, Butler Community College 4. Bruce Crouse, Executive Director for Workforce Development & Career and Technical
Education, Cowley County Community College 5. Marvin Duncan, Director Customized Training, Sedgwick County 6. Jim Edwards, Dean of Career and Technical Education, Butler Community College 7. Tony Fiedler, Director of Employment and Environmental Services – Multi County Diversified
Services – McPherson (Place individuals with disabilities into jobs through contractual relationships with Business and Industry) Past City Commissioner and CEO Board member from McPherson County
8. Angela Harding, Ark City High school career/counselor, Cowley County 9. Keith Lawing, Executive Director, Workforce Alliance of South Central Kansas, serving
Sedgwick, Butler, Cowley, Sumner, Harper, and Kingman counties. All six counties are involved in the WIRED Initiative
10. Pedro Leite, Dean, Advanced Technology Center, Butler Community College 11. Royal Lovingfoss, Research Engineer, Program Manager, WSU, NIAR 12. Denise Pfeifer, Grants Coordinator, Wichita Area Technical College 13. Steve Porter, Associate Dean of Instruction, Hutchinson Community College and Area
Vocational School 14. Deb Scheibler, Program Director, Kansas Local Area I Workforce Investment Board. 15. Andy Solter, President, Kansas Career Pipeline (Internet-based education and career planning
system), Sedgwick County 16. Zulma Toro-Ramos, Dean of College of Engineering, Wichita State University 17. Veronica Triana, Disability Coordinator, KDOC 18. Sheree Utash, Vice President of Academic Affairs, Wichita Area Technical College, WATC
Strategy 2, Research & Development and Entrepreneurship Implementation Team
1. Tom Aldag, Director, Research and Development, National Institute for Aviation Research, Wichita State University, Sedgwick County
2. David Alfaro, Executive Director, Butler County Economic Development 3. Alan Badgley, Small Business Consultant, Kansas Small Business Development Center, Wichita
State University, Sedgwick County 4. Art Bierschbach, Project Manager, MAMTC, Sedgwick County 5. Troy Carlson, President, Initiatives, Inc., consultant involved with WSU, ORI, KBA 6. Joe Carrithers, Research Operations Officer, Orthopedic Research Institute, Via Christi
Research, Inc., Sedgwick County 7. Frank Choriego, Assistant Director, Kansas Small Business Development Center, Wichita State
University, Sedgwick County 8. Royal Lovingfoss, Research Engineer, Program Manager, WSU, NIAR
South Central Kansas WIRED Initiative Composites Kansas Final Report
57
9. Sandy Nichols, Principal (2008-2009) Chaparral High Anthony, Harper County, K-12 Education 10. Kyle Robinson, Project Manager, MAMTC, Sedgwick County 11. John Saunders, Research Engineer and NDT Instructor, Program Manager, WSU, NIAR 12. Jim Schwarzenberger, Vice President; Workforce Solutions, Wichita Metro Chamber of
Commerce, Sedgwick County 13. Marcia Stevens, Regional Director, Kansas Small Business Development Center, Wichita State
University, Sedgwick County 14. Timothy Pett, Director, Center for Entrepreneurship, Wichita State University, Sedgwick County 15. Wendy Veatch, Director of Outreach Programming, WSU Center for Entrepreneurship
Strategy 3, Regional Economic Growth Implementation Team 1. AJ Anderson, Director, US Dept. of Commerce, Export Assistance Center 2. David Bossemeyer, Business Development, GWEDC 3. Bob Dalke, Executive Director, Kansas Local Area I Workforce Investment Board. Local Area I
is 62 counties covering 55,000 square miles of North Central and Western Kansas. Four counties from Local Area I are involved in the WIRED Initiative: Reno, Harvey, McPherson and Marion
4. Kerri Falletti, Director, Cowley First - Cowley County Economic Development 5. Bob Fettke, Regional Project Manager, Business Development Division, KDOC 6. Irene Hart, Director, Sedgwick County Community Development 7. Jim Heinicke, Municipal Consultant, Jim Heinicke LLC, Harvey County 8. Janis Hellard, Director, Sumner County Economic Development Commission 9. Linda Jolly, Executive Director, El Dorado Inc., Butler County 10. Tammy Nolan, Marketing Manager, GWEDC 11. Tim Richards, Executive Director, Workforce Solutions, Sedgwick County 12. Clint Seibel, Executive Director, Hillsboro Development Corporation/Hillsboro Ventures,
Marion County 13. Duane Smith, Research Director, GWEDC 14. Debra Teufel, Managing Director of Business Development, GWEDC 15. Jane Wallace, Executive Director, Kingman County Economic Development 16. Joe Yager, Executive Director, REAP
South Central Kansas WIRED Initiative Composites Kansas Final Report
58
Governance A Leadership Team provided governance for Composites Kansas WIRED Initiative. Leadership Team members were senior executive candidates who were regional champions with significant social networks to provide the Initiative with access and flexibility to implement growth strategies and guide the regional transformational effort. Initially the coordination of the Leadership Team was facilitated by the chair of Workforce Alliance and designee of Kansas WorkforceONE. The Kansas Department of Commerce appointed two Leadership Team members. Five members of the Leadership Team were appointed from the funded WIRED partners.1 The Leadership Team will also include members appointed by the Regional Economic Area Partnership (REAP)2 from business, industry, minority business councils, apprenticeship representative, K-12 education, post-secondary education, and economic development professionals. Co-chairs were selected by the Leadership Team and meetings were conducted at the discretion of the Team to guide the transformation efforts and review the progress of the Composites Kansas WIRED strategies and operations. To support the Leadership Team and expedite actions or decisions associated with the execution of the WIRED Initiative, an Executive Committee comprised of the Leadership Team’s co-chair(s), and Leadership Team representatives from the aviation, healthcare, non-aviation manufacturing, state government, education and three at-large positions was established. Nonvoting, ex officio, members included senior officials from the local workforce boards and the project director – a staff member. The Executive Committee members were nominated by the Co-Chairs and affirmed by the Leadership Team. The Executive Committee was empowered to act on behalf of the Leadership Team to address any modifications in funding or outcomes that required quick or immediate attention. All issues before the Executive Committee and actions taken were communicated to the Leadership Team. The Executive Committee met in response to specific topics that require expedited action or decision. Responsibility for daily operation of the Composites Kansas WIRED Initiative rested with a Project Director through a Memorandum of Understanding (MOU) between the Workforce Alliance and Kansas WorkforceONE. The Project Director reported directly to the WIRED Leadership Team. The Project Director was a staff member of the Leadership Team and the Implementation Teams. There were three primary strategies in the Composites Kansas WIRED Initiative, and Implementation Teams coordinated execution of the Composites Kansas WIRED Initiative for each of the strategies. Implementation Teams consisted of initiative leaders from the regional partner(s) sponsoring the initiatives. The Implementation Teams were staffed by the Project Director and members were appointed by the Leadership Team. The role of the Implementation Teams was to coordinate and integrate the grant activities, leverage resources to maximize outcomes and track program metrics. Implementation Teams met monthly.
1 The chairman of Workforce Alliance of South Central Kansas and designee of Kansas WorkforceONE initially coordinated the Leadership Team. Additional funded WIRED partners are Wichita State University, Wichita Area Technical College, Via Christi Research, Kansas Career Pipeline and Greater Wichita Economic Development Coalition. 2 The Regional Economic Area Partnership (REAP) is comprised of thirty-four city and county governments in the nine counties of South Central Kansas, which include Butler, Cowley, Harper, Harvey, Kingman, McPherson, Reno, Sedgwick, and Sumner counties. These jurisdictions have voluntarily joined together for two primary purposes – to guide state and national actions that affect economic development in the region and to consider and adopt joint actions among member governments that enhance the regional economy.
South Cen
Appendi
tral Kansas W
ix1.Bluepri
IRED Initiative
intforAmer
ricanProspe
59
erity,Innova
ationinARR
Composites
RAImpleme
Kansas Final R
entation
Report
South Central Kansas WIRED Initiative 60
Composites Kansas Final R
Report