© 2010 Encore Electronics, Inc. All rights reserved.COVER
Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. All trademarks and brand names are the properties of their respective holders.
© 2011 Encore Electronics, Inc.
1 www.encore-usa.com
TABLE OF CONTENTS
CHAPTER 1: OVERVIEW .............................................................................. 3
1.1 PRODUCT OVERVIEW ............................................................................. 3 1.2 LED INDICATOR ...................................................................................... 4 1.3 PACKAGE CONTENTS.............................................................................. 4 1.4 SYSTEM REQUIREMENTS ....................................................................... 4
CHAPTER 2: INSTALLATION ...................................................................... 5
2.1 HARDWARE INSTALLATION ...................................................................... 5 2.2 SOFTWARE INSTALLATION ...................................................................... 6
2.2.1 Windows® 7 and Windows Vista® ................................................. 6 2.2.2 Windows® XP ................................................................................... 9
2.3 REMOVING THE ENUWI-1X4X SOFTWARE .......................................... 12 2.4 UPGRADING THE ENUWI-1X4X SOFTWARE ........................................ 12
CHAPTER 3: CONNECTING TO WIRELESS NETWORKS IN
WINDOWS 7® ........................................................................ 13
CHAPTER 4: CONNECTING TO WIRELESS NETWORKS IN
WINDOWS VISTA® .............................................................. 15
CHAPTER 5: CONNECTING TO WIRELESS NETWORKS IN
WINDOWS® XP ..................................................................... 17
CHAPTER 6: TECHNICAL SUPPORT ...................................................... 20
CHAPTER 7: WARRANTY INFORMATION ............................................. 20
APPENDIX A. WIRELESS SECURITY OVERVIEW ................................. 21
A1. WEP, WPA AND WPA2 COMPARISON ................................................. 21 A2. WEP / WPA / WPA2 802.1X .............................................................. 21 A3. ENABLING 802.1X IN WINDOWS® ........................................................ 22
2 www.encore-usa.com
APPENDIX B. USING ENCORE WIRELESS MANAGER IN WINDOWS
XP® .......................................................................................... 23
B1. STARTING ENCORE WIRELESS MANAGER ........................................... 23 B2. ENCORE WIRELESS MANAGER OVERVIEW .......................................... 24 B3. MANUAL CONNECTION ......................................................................... 26 B4. EASY CONNECTION WITH WPS ........................................................... 27
B4.1. WPS — PBC (Push Button Configuration) ................................ 28 B4.2. WPS — PIN (Personal Information Number) ............................ 29
B5. USING 802.1X ...................................................................................... 30
APPENDIX C. CONNECTING TO WIRELESS NETWORKS WITH
WIRELESS ZERO CONNECTION IN WINDOWS XP® .. 31
APPENDIX D. SPECIFICATIONS ................................................................ 33
APPENDIX E. REGULATORY INFORMATION ......................................... 34
E1. FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT ............. 34
E2. EUROPE – EU DECLARATION OF CONFORMITY ................................................. 35
APPENDIX F. SOFTWARE END USER LICENSE AGREEMENT ........ 37
APPENDIX G. USER’S NOTICE .................................................................. 39
Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.
All trademarks and brand names are the properties of their respective holders. © 2011 Encore Electronics, Inc. All rights reserved.
3 www.encore-usa.com
Chapter 1: Overview
Thank you for choosing Encore Electronics’ Wireless N150 USB Adapter. With just a few
steps, you will be enjoying the convenience of wireless networking at the speed that is
much faster than the prior Wireless G technology. Place the notebook or desktop computer
at any place you want to avoid the hassle and unsightly view of wires. Moreover,
ENUWI-1X4x supports Wi-Fi Protected Access (WPA/WPA2) data encryption to help
protect your data and privacy.
With Encore Electronics’ Wireless N150 USB Adapter, you can smoothly browse websites,
play games, stream video, make phone calls and download files over the Internet. You
also can easily share files with other users and access peripherals, such as network drives,
printers and cameras, in your home or office networks.
1.1 Product Overview
A. Mini USB Adapter
B. Detachable, External Antenna*
C. Antenna Connector
Note:
* The antenna shown in the picture on
the left is 2dBi antenna. Adapter with
other type of antennas are also
available.
4 www.encore-usa.com
1.2 LED Indicator
The Activity LED will be blinking when:
• The adapter is scanning for available wireless networks.
• The adapter is transferring and/or receiving data.
1.3 Package Contents
• Wireless N150 USB Adapter x 1
• Detachable, External Antennas x 1
• Installation CD (User Manual on CD) x 1
1.4 System Requirements
• One available USB port • Operating System: Windows® 7, Windows Vista® or Windows® XP
Mac OS Linux
• CD-ROM Drive
5 www.encore-usa.com
Chapter 2: Installation
2.1 Hardware Installation 1. Attach the external antenna to the connector on the back of the wireless adapter.
2. Insert the wireless adapter into an available USB port on your computer.
3. Please refer to the next section to complete the driver installation.
6 www.encore-usa.com
2.2 Software Installation
2.2.1 Windows® 7 and Windows Vista®
The installation procedures are similar between Windows® 7 and Windows Vista®.
A.
1. Click “Cancel,”
if you see the ‘Found New Hardware Wizard’ window.
B. Insert the ‘Installation CD” that comes with the package to the CD-ROM drive. Depending on your computer’s configuration, one of the following 3 scenarios will happen (B-1 to B-3).
B-1
The ‘Encore Welcome Screen’ appears automatically, and then the ‘Quick Setup’ window in Step C will appear.
B-2
Instead of the ‘Encore Welcome Screen,’ the ‘AutoPlay’ window appears.
Select “Run autorun.exe.”
ENUWI-1X4x
7 www.encore-usa.com
B-3
If neither the ‘Encore Welcome Screen’ nor the ‘AutoPlay’ window appears, type “D:\autorun.exe” in the “Run” command window in the Start menu (‘D’ is the drive letter of your CD-ROM drive).
If the “Run” command window is not in
the Start menu, go to the Start menu → type “run” in the “search box”
→ select “Run” in the list of results.
Note: You can use “Browse” to find the CD-ROM drive number.
C.
Click “Software & Driver Installation
” in the ‘Quick Setup’ window.
D.
Click “Yes” to continue,
if you see ‘Do you want to allow the following program to make changes to this computer?’ in the ‘User Account Control’ window.
8 www.encore-usa.com
F.
Click “Next” to continue,
when you see the ‘ENCORE Wireless Manager’ window.
E.
Click “Install this driver software anyway,”
if you see ‘Windows can’t verify the publisher of this driver software’ in the ‘Windows Security’ window.
G
1. Save any opened file in other program;
2. Check “Yes, I want to restart my computer now;”
3. Click “Finish” to restart the computer,
when you see ‘InstallShield Wizard Complete’ in the ‘ENCORE Wireless Manager’ window.
9 www.encore-usa.com
2.2.2 Windows® XP
A.
1. Click “Cancel,”
if you see the ‘Found New Hardware Wizard’ window when you start Windows for the first time after installing the hardware.
B. Insert the ‘Installation CD” that comes with the package to the CD-ROM drive. Depending on your computer’s configuration, one of the following 2 scenarios will happen (B-1 or B-2).
B-1
The ‘Encore Welcome Screen’ appears automatically, and then the ‘Quick Setup’ window in Step C will appear.
B-2
If the ‘Encore Welcome Screen’ does not appear, type “D:\autorun.exe” in the “Run” command window in the Start menu (‘D’ is the drive letter of your CD-ROM drive).
Note: You can use “Browse” to find the CD-ROM drive number.
10 www.encore-usa.com
C.
Click “Software & Driver Installation
” in the ‘Quick Setup’ window.
D.
Click “continue,”
if you see ‘A program needs your permission to continue’ in the ‘User Account Control’ window.
E.
Click ”Next” to continue,
when you see the ‘ENCORE Wireless Manager’ window.
11 www.encore-usa.com
F.
Click “Continue Anyway,”
if you see this warning message in the ‘Hardware Installation’ window.
G.
1. Save any opened file in other program;
2. Check “Yes, I want to restart my computer now;”
3. Click “Finish” to restart the computer,
when you see ‘InstallShield Wizard Complete’ in the ‘ENCORE Wireless Manager window.
12 www.encore-usa.com
2.3 Removing the ENUWI-1X4x software
Open the Windows Start menu
In Windows 7® and Windows Vista®
→ go to “Control Panel” → click “Uninstall a
program” under the ‘Programs’ category → select the ‘ENCORE Wireless
Manager - ENUWI-1X4x’ → click “Uninstall” → follow the on-screen instructions
Open the Windows Start menu
In Windows XP®
→ go to the “Encore Wireless Manager”
program group → select “Uninstall - Encore Wireless Manager” → follow the
on-screen instructions
Alternatively, open the Windows Start menu → go to “Control Panel” →
select “Add or Remove Programs” → select the “ENCORE Wireless Manager -
ENUWI-1X4x” → click “Remove” → follow the on-screen instructions
2.4 Upgrading the ENUWI-1X4x software
Upgrades may be available at the Encore Electronics’ website (www.encore-usa.com).
You have to follow the steps below.
1. Write down the SSID (wireless network name) and password (also called network
security key, passphrase or pre-shared key) for any wireless network you want to
save. The saved network profiles will be erased after the upgrade.
2. Download the upgrade from ENUWI-1X4x’s SUPPORT page on Encore Electronics’
website.
3. Remove the ENUWI-1X4x software from your computer.
4. Restart your computer.
5. If the upgrade file ends in .zip, you need to extract the .zip file first.
6. Run the upgrade file (ending in .exe) that you downloaded.
7. Follow the on-screen instructions.
13 www.encore-usa.com
Chapter 3: Connecting to Wireless Networks in Windows 7®
After installation, please use the Windows Wireless Manager to connect to wireless
networks by following the steps below.
A.
Left-click on the “Windows Wireless Manager Tray Icon .”
B.
If you do not see the icon, click the “Show hidden icons ” arrow in the system tray.
C.
1. Select the “Wireless Network Connection” of your choice;
2. Click “Connect.”
Note: The “Connect automatically” check box is checked by default. Your computer will automatically connect to the same wireless network when you are at the same location next time.
Note: If no wireless security is turned on, the warning message ‘Information sent over this network might be visible to others.’ will appear. Click “Connect” if you want to proceed. Step D will be skipped.
14 www.encore-usa.com
D.
1. Enter the “Security Key” (also called password, passphrase or pre-shared key);
2. Click “OK.”
E.
Once connected successfully, you will see the following two updates:
1. When Left-click
2. The ‘Windows Wireless Manager Tray Icon’ will become
on ‘Windows Wireless Manager Tray Icon,’ you will see ‘Connected’ next to the wireless network of your choice.
.
Note: For help with the Windows Wireless Manager, please refer to “Help and Support” in
the Start menu at the lower left corner of your screen.
15 www.encore-usa.com
Chapter 4: Connecting to Wireless Networks in Windows Vista®
After installation, please use the Windows Wireless Manager to connect to wireless
networks by following the steps below.
A.
Left-click on ‘Windows Wireless Manager Tray Icon .’
B.
Click “Connect to a network.” (NOT the “Network and Sharing center.”)
C.
1. Select the “Wireless Network” of your choice;
2. Click “Connect.”
D.
1. Enter the “Security Key” (also called password, passphrase or pre-shared key);
2. Click “Connect.”
Note: If no wireless security is turned on, an alternative window with the warning message ‘Information sent over this network might be visible to others.’ will appear. Select “Connect Anyway” if you want to proceed.
16 www.encore-usa.com
E.
1. The “Save this network” and “Start this connection automatically” checkboxes are checked by default;
2. Click “Close.”
Note: If “Start this connection automatically” is checked, your computer will automatically connect to the same wireless network when you are at the same location next time.
F.
• The ‘Set Network Location’ window may appear.
1. Select one of the three location types: “Home,” “Work” or “Public.”
2. Click “Close” in the follow-up window.
Note: Based on your choice, Windows will automatically configure the appropriate firewall settings.
G.
The ‘Windows Wireless Manager Tray Icon’ will show a globe at its lower right corner ( ).
Note: For help with the Windows Wireless Manager, please refer to “Help and Support” in
the Start menu at the lower left corner of your screen.
17 www.encore-usa.com
Chapter 5: Connecting to Wireless Networks in Windows® XP
After the software installation, you can locate the Encore Wireless Manager Tray Icon at
the lower right corner of your screen as in Figure A below.
Figure A. Encore Wireless Manager Tray Icon location
Icon Description
The ENUWI-1X4x is connected to a wireless network with
excellent connection quality.
The ENUWI-1X4x is not connected to a wireless network.
Next page provides step-by-step guide to connecting to wireless networks with your
wireless adapter.
18 www.encore-usa.com
Please follow the steps below to connect to wireless networks.
A.
1. Right-click
2. Click “Set Wizard.”
on the ‘Encore Wireless Manager Tray Icon’ at the lower right corner of the screen;
B.
1. Check “Wireless Local Area Networks (Infrastructure);”
2. Click “Next.”
C.
1. Select the ‘SSID’ (wireless network name) you want to connect to.
2. Click “Next.”
Note: If the selected SSID has wireless security turned on, the Encore Wireless Manager will automatically detect the security option for you.
D.
Only
when you see the ‘Wireless Network Properties’ window.
enter and confirm the “Network Key” (also called password, passphrase or pre-shared key) of your router or access point,
Note: For most users, no need to change ‘Network Authentication’ and ‘Data encryption.’
19 www.encore-usa.com
E.
1. “Obtain an IP address automatically” and “Obtain DNS server address automatically” are checked by default in the ‘Setup TCP/IP’ window.
Note: For most users, no need to change these two options.
2. Click “Finish.”
F. Two ways to know the connection is successful:
F-1 Encore Wireless Manager Tray Icon
F-1 The ‘Encore Wireless Manager Tray Icon’ at the lower right corner of the screen will become green .
Note: The ‘Windows Wireless Manager Tray Icon’ will become .
F-2 Encore Wireless Manager
F-2 The ‘Signal Strength’ and ‘Link Quality’ bars in the ‘General’ tab in the Encore Wireless Manager will become active and green.
20 www.encore-usa.com
Chapter 6: Technical Support
If you have other questions, please visit the SUPPORT section on our website
at www.Encore-USA.com first. You can submit your support request directly on our
website. You can also reach us through one of the support hotlines or emails listed on the
back of this user manual. Our experienced support representatives are ready to help you
with any of your technical questions.
Chapter 7: Warranty Information
Please visit the TERMS AND POLICIES section on our website at www.Encore-USA.com
for detailed information.
21 www.encore-usa.com
Appendix A. Wireless security Overview A1. WEP, WPA and WPA2 comparison
WEP, WPA-PSK and WPA2-PSK are standard wireless security options. When using any one of them, each device in the wireless network MUST use the SAME wireless security option and network security key (also called password, passphrase or pre-shared key). Otherwise, the wireless network will not function properly.
Name WEP
(Wired Equivalent Privacy)
WPA - PSK (Wi-Fi Protected Access
— Pre-Shared Key)
WPA2 - PSK (Wi-Fi Protected Access 2
— Pre-Shared Key)
Also called
---- WPA - Personal
or WPA WPA2 - Personal
or WPA2
Security Level
basic strong strongest
Password Format
10- or 26- character hex key (A hex key is a combination of
letters, a – f, and numbers, 0 – 9.)
8- to 63- character passphrase (A passphrase is a combination of
alphabet letters and numbers.)
A2. WEP / WPA / WPA2 802.1X 802.1X is for advanced users who are familiar with using a RADIUS server and setting up digital certificates. Each user needs to provide his or her own username, password and digital certificate in order to access the wireless network.
Name WEP 802.1X WPA 802.1X WPA2 802.1X
Also called Dynamic WEP WPA - Enterprise WPA2 - Enterprise
Security Level basic strong strongest
Note: WEP is a deprecated wireless security algorithm. There are readily available programs to crack the WEP encryption within minutes. Nonetheless, WEP is widely used and is often the default wireless security option in older wireless devices.
22 www.encore-usa.com
A3. Enabling 802.1X in Windows®
802.1X authentication can help enhancing security for 802.11 wireless networks and wired
Ethernet networks with user account verification. A digital certificate or a smart card is
normally required to complete the authentication. 801.1X authentication is typically used
for workplace connections and requires IT professionals to setup the system properly.
Windows® 7 and Windows Vista®
1. Left-click on the “Windows Network Manager Tray Icon” ( or in
Windows 7 or in Windows Vista), and then open “Network and Sharing Center.”
2. Open “Manage Wireless Networks.”
3. Right-click
4. Click the “Security” tab, and then, in the “Security Type” list, click “802.1X.”
the network that you want to enable 802.1X authentication for, and then
click “Properties.”
5. In the “Encryption Type” list, click the encryption type used by the router or access
point.
6. In the “Choose a network authentication method” list, click the method that
matches with the RADIUS server.
7. To configure additional settings, click “Settings.”
Please refer to the “Help and Support” in the Start menu
Windows® XP
.
23 www.encore-usa.com
Appendix B. Using Encore Wireless Manager in Windows XP®
The Encore Wireless Manager is the default wireless manager in Windows XP. While the
Encore Wireless Wizard helps you connecting to wireless networks quickly, the Encore
Wireless Manager offers you more control over your wireless networks.
B1. Starting Encore Wireless Manager
You can open Encore Wireless Manager in three ways:
1. From Encore Wireless Manager Tray Icon —
• Left-click on the ‘Encore Wireless Manager Tray Icon’ at the lower right corner
of your screen, and then select “Open Config Utility.”
2. From Encore Wireless Manager Desktop Icon — • Double-click on the desktop icon.
3. From Windows Start menu —
1. Open the Windows Start menu at the lower left corner of your screen.
2. Find the ‘ENCORE Wireless Manager’ program group.
3. Select the “ENCORE Wireless Manager” option.
24 www.encore-usa.com
B2. Encore Wireless Manager Overview
Top Toolbar
Set Wizard: starts the Encore Wireless Wizard
About: shows the software version.
Tabs
General: shows the connection status information.
Profile: shows the previously saved wireless networks.
Available Network: shows the list of available wireless networks at your current
location.
Status: shows the detailed connection status information.
Statistics: shows the data amount that is transferred and received.
Wi-Fi Protected Setup: allows you to connect to a wireless network without entering and
memorizing any wireless password (also called network key,
passphrase or pre-shared key). For more details, please refer to
page 27.
25 www.encore-usa.com
Bottom Checkbox
Show Tray Icon: is checked by default. It allows the Encore Wireless Manager Tray Icon
to appear at the lower right corner of your screen.
Disable Adapter: It is recommended using one wireless adapter as the same time. If you
want to use another wireless adapter, you can easily disable the
ENUWI-1X4x by checking this checkbox.
Radio Off: If checked, the ENUWI-1X4x cannot connect to any wireless network.
Windows Zero Config: In Windows XP, you cannot use the Encore Wireless Manager
and the Windows Wireless Manager (also called Wireless Zero
Configuration) at the same time. If you want to use the Windows
Wireless Manager, you need to check this box first.
Note: The “Windows Zero Config” checkbox may not appear sometimes. When this
happens, you can go to Start menu → “Control Panel” → ”Settings”
→”Administrative Tools” → “Services,” and then manually enable “Wireless Zero
Configuration.”
26 www.encore-usa.com
B3. Manual Connection
A.
1. Go to the “Available Network” tab;
2. Select the “SSID” (wireless network name) of your choice;
3. Click “Add to Profile;”
4. If the selected network has wireless security enabled, Encore Wireless Manager will automatically detect the wireless security option.
Note: The ‘Unsecured Network’’ warning window will appear if there is no wireless security enabled. Click “OK” if you want to proceed.
B.
Only
when you see this ‘Wireless Network Properties’ window.
enter and confirm the “Network Key” (also called password, passphrase or pre-shared key) of the router or access point,
Note: For most users, no need to change ‘Network Authentication’ and ‘Data encryption.’
C.
Once connected, the tab will automatically switch to the “General” tab. The ‘Signal Strength’ and ‘Link Quality’ bars will become active and green.
Note: The ‘Encore Wireless Manager Tray Icon’ at the lower right corner of the screen will become green as well.
27 www.encore-usa.com
B4. Easy Connection with WPS
Wi-Fi Protected Setup (WPS) allows your computer to connect to a wireless router or
access point without a network security key (also called password, passphrase or
pre-shared key). Please check the user manual of your router or access point to see if it
supports WPS.
Two connection methods are available for WPS:
Push Button Configuration (PBC)
Personal Information Number (PIN).
The instructions are shown in the following two pages.
28 www.encore-usa.com
B4.1. WPS — PBC (Push Button Configuration)
Push Button Configuration (PBC) allows your computer to connect to a wireless network
by the click of a button. You do not need to memorize your router or access point’s wireless
security password. Please check the user manual of your router or access
point to see if it supports WPS - PBC. Normally, the PBC button comes with
an icon like the one on the right.
Note: Before you start, please have your wireless router and your computer in close range.
This is just temporary. You can place your router or computer anywhere you want
afterward.
A.
1. Go to the “Wi-Fi Protected Setup” tab.
2. Click on “Push Button Config (PBC).”
3. Within two minutes
, press the WPS-PBC button on your router or access point.
Note: Please follow the instructions in the user manual of your router or access point.
B.
Once connected, the tab will automatically switch to the “General” tab. The ‘Signal Strength’ and ‘Link Quality’ bars will become active and green.
Note: The ‘Encore Wireless Manager Tray Icon’ at the lower right corner of the screen will become green as well.
29 www.encore-usa.com
B4.2. WPS — PIN (Personal Information Number) Personal Information Number (PIN) allows your computer to connect to a wireless network by entering the adapter’s PIN code to your router or access point. Unlike wireless network security passwords, you do not need to memorize the PIN code. Please check the user manual of your router or access point to see if it supports WPS - PIN. Note: To enter your adapter’s PIN code to your router or access point, you need to know your router or access point’s IP address
. In addition, you need to have one of the following:
A computer directly connects to the router or access point through wired connection. This computer can be the one with ENUWI-1X4x installed on or a different one.
A computer already connects to the router or access point through wireless connection. For example, this could be your laptop computer.
A.
1. Go to the “Wi-Fi Protected Setup” tab.
2. Click on “Pin Input Config (PIN)”
3. Within two minutes
, enter ENUWI-1X4x’s PIN code into your router or access point’s Web-based Utility through a web browser.
Note: To complete Step 3, you need to know your router or access point’s IP address to access its Web-based Utility.
B.
Once connected, the tab will automatically switch to the “General” tab. The ‘Signal Strength’ and ‘Link Quality’ bars will become active and green.
Note: The ‘Encore Wireless Manager Tray Icon’ at the lower right corner of the screen will become green as well.
30 www.encore-usa.com
B5. Using 802.1X
802.1X is for advanced users who are familiar with using a RADIUS server and setting up
digital certificates. Workplace networks often use 802.1X to tighten the network control.
When connecting to a wireless network using WEP/WPA/WPA2 802.1X security, you need
to provide two types of information in the ‘Wireless Network Properties’ window.
Authentication Method Section:
• You need to select the authentication protocol that the RADIUS server is using.
User Credential Section:
• You need to provide username, password, and/or other digital credentials
requested by the RADIUS server.
Note: For more details, please consult with an IT specialist.
31 www.encore-usa.com
Appendix C. Connecting to Wireless Networks with Wireless Zero Connection in Windows XP®
Alternatively, you can use Windows Wireless Manager (also called Wireless Zero
Connection or WZC) to connect to wireless networks in Windows XP by following the steps
below.
A.
1. Open ‘Encore Wireless Manager.’
2. Check “Windows Zero Config” at the bottom of the window.
Note: You cannot use Windows ‘Wireless Zero Connection’ and ‘Encore Wireless Manager’ to manage wireless networks at the same time. To give control back to ‘Encore Wireless Manager,’ you need to uncheck ‘Windows Zero Config.’
Note: If the “Windows Zero Config” checkbox does not appear in Encore Wireless Manager, you need to go to “Start menu ” → “Control Panel” → ”Settings” → “Administrative Tools” → “Services,” and then enable “Wireless Zero Configuration.”
B.
1. Right-click on ‘Windows Wireless Manager Tray Icon ;’
2. Click “View Available Wireless Networks.”
C.
1. Select the ‘Wireless Network Name’ (SSID) of your choice;
2. Click “Connect.”
32 www.encore-usa.com
D.
1. Enter and confirm the “Network key” (also called password, passphrase or pre-shared key);
2. Click “Connect.”
Note: If no wireless security is turned on, an alternative window with the warning message ‘Information sent over this network might be visible to others.’ will appear. Select “Connect Anyway” if you want to proceed.
E.
Once connected successfully, the text ‘Connected’ will appear next to the wireless network of your choice.
F.
Also, you will see two updates in the system tray:
1. The ‘Windows Wireless Manager Tray Icon’ will change to . 2. The ‘Encore Wireless Manager Tray Icon’ will become green .
Note: For help with the Windows Wireless Manager, please refer to “Help and Support” in
the Start menu at the lower left corner of your screen.
33 www.encore-usa.com
Appendix D. Specifications
Standard • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b
Radio Technology
• IEEE 802.11g / IEEE 802.11n: Orthogonal Frequency Division Multiplexing (OFDM)
• IEEE 802.11b: Direct Sequence Spread Spectrum (DSSS)
Interface • USB 2.0
Transmission Rate • 1, 2, 5.5, 6, 11, 12, 18, 22, 24, 30, 36,
48, 54, 60, 90, 120, 180, 240, 270, 300Mbps (auto sense) for Rx
• 1, 2, 5.5, 6, 11, 12, 18, 22, 24, 30, 36, 48, 54, 60, 90, 120, 135, 150Mbps (auto sense) for Tx
Receiver Sensitivity
• 150Mbps Typical-68dBm • 54Mbps Typical-73dBm • 11Mbps Typical-84dBm
Modulation Schemes • DBPSK / DQPSK / CCK / OFDM
(BPSK / QPSK / 16-QAM / 64-QAM) • Media Access Protocol • CSMA / CA with ACK
Transmit Power • 16dBm typically @ 802.11b • 14dBm typically @ 802.11g • 13dBm typically @ 802.11n
Wireless LAN Frequency Range • 2.400 ~ 2.484 GHz
Certifications • FCC, CE, VCCI Class B
Security • 64/128-bits WEP Encryption • WPA-PSK, WPA2-PSK, WPA-802.1X,
WPA2-802.1X • WPS
Quality of Service (QoS) • WMM
Range Coverage • Indoor: Up to 100 meters (depends on
environment) • Outdoor: Up to 300 meters (depends
on environment)
Antenna • One detachable antenna with SMA
connectors
Diagnostic LED • Activity Status
Operating Temperature • 0 ~ 40 oC (32°~104°F)
Storage Temperature • -20 ~ 70 oC (-4°~158°F)
Humidity • Operating:
10% ~ 90% RH, non-condensing • Storage:
5%~90% RH, non-condensing
Channel • USA: 11 • Europe: 13 • Japan: 14
Driver Support • Windows® 7, Windows Vista® and
Windows® XP • Mac OS • Linux
34 www.encore-usa.com
Appendix E. Regulatory Information
E1. Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
35 www.encore-usa.com
E2. Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60 950-1: 2001 +A11: 2004
Safety of Information Technology Equipment
EN 50385: 2002
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public
EN 300 328 V1.7.1 (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
EN 301 489-1 V1.6.1 (2005-09)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
EN 301 489-17 V1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
0560
36 www.encore-usa.com
Česky [Czech] Encore Electronics Inc. tímto prohlašuje, že tento ENHWI-G2 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish] Undertegnede Encore Electronics Inc erklærer herved, at følgende udstyr ENHWI-G2 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch [German] Hiermit erklärt Encore Electronics Inc, dass sich das Gerät ENHWI-G2 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti [Estonian] Käesolevaga kinnitab Encore Electronics Inc seadme ENHWI-G2 vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English Hereby, Encore Electronics Inc, declares that this ENHWI-G2 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español [Spanish] Por medio de la presente Encore Electronics Inc declara que el ENHWI-G2 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Encore Electronics Inc ΔΗΛΩΝΕΙ ΟΤΙ ENHWI-G2 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French] Par la présente Encore Electronics Inc déclare que l'appareil ENHWI-G2 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian] Con la presente Encore Electronics Inc dichiara che questo ENHWI-G2 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian] Ar šo Encore Electronics Inc deklarē, ka ENHWI-G2 atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių [Lithuanian] Šiuo Encore Electronics Inc deklaruoja, kad šis ENHWI-G2 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch] Hierbij verklaart Encore Electronics Inc dat het toestel ENHWI-G2 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese] Hawnhekk, Encore Electronics Inc, jiddikjara li dan ENHWI-G2 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian] Alulírott, Encore Electronics Inc nyilatkozom, hogy a ENHWI-G2 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish] Niniejszym Encore Electronics Inc oświadcza, że ENHWI-G2 jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese] Encore Electronics Inc declara que este ENHWI-G2 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian] Encore Electronics Inc izjavlja, da je ta ENHWI-G2 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak] Encore Electronics Inc týmto vyhlasuje, že ENHWI-G2 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish] Encore Electronics Inc vakuuttaa täten että ENHWI-G2 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska [Swedish] Härmed intygar Encore Electronics Inc att denna ENHWI-G2 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
37 www.encore-usa.com
Appendix F. Software End User License Agreement PLEASE READ THE FOLLOWING TERMS ("Agreement") CAREFULLY. USE OF THE SOFTWARE (defined below) PROVIDED BY ENCORE ELECTRONICS, INC. IS PERMITTED ONLY UNDER AND IN ACCORDANCE WITH THIS AGREEMENT. IF YOU DO NOT AGREE TO BE BOUND BY THIS AGREEMENT, PLEASE DO NOT USE THIS SOFTWARE. 1. Grant of License. This Agreement permits you to use one copy of the Software or the Software included in this package or device on any single computer ("Software"). For each software licensee, the program can be "in use" on only one computer or hardware device at any given time. The Software is "in use" when it is either downloaded, copied, loaded into RAM or installed into the hard disk or other permanent memory of a computer or other hardware device.
2. License Restrictions. YOU MAY NOT RENT, LEASE, SUBLICENSE, SELL, ASSIGN, LOAN OR OTHERWISE TRANSFER THE SOFTWARE OR ANY OF YOUR RIGHTS AND OBLIGATIONS UNDER THIS AGREEMENT. You may not modify, translate, reverse assemble, decompile, disassemble or otherwise attempt (i) to defeat, avoid, bypass, remove, deactivate or otherwise circumvent any software protection mechanisms in the Software, including without limitation any such mechanism used to restrict or control the functionality of the Software, or (ii) to derive the source code or the underlying ideas, algorithms, structure or organization from the Software (except to the extent that such activities may not be prohibited under applicable law). However, you may transfer all your right to use the Software to another person or organization, provided that (a) the followings are also transferred with the Software, (i) this Agreement; (ii) other software if contained in the original package, and/or hardware that the Software is bundled; (iii) any original or updated version of the Software; (b) no copies including back-up and installed in your computer or other device are at your possession after the transfer, and (c) the recipient accepts all the terms of this Agreement. In no event shall you transfer the Software obtained as a trial, test version, or otherwise specified as not for resale. A special license permit from Encore Electronics, Inc. is required if the program is going to be installed on a network server for the sole purpose of distribution to other computers.
3. Copyright. The Software or the Software contained in this package or device is protected by United States copyright laws, international treaty provisions, and all other applicable national laws. The Software must be treated like all other copyrighted materials (e.g. books and musical recordings). This license does not allow the Software to be rented or leased, and the written materials accompanying the Software (if any) may not be copied.
4. Ownership. Title, ownership rights, and all intellectual property rights in and to the Software and any accompanying documentation, and any copy of the foregoing, and any sample contents shall remain the sole and exclusive property of Encore Electronics, Inc. and/or its third party licensors. You agree to abide by the copyright law and all other applicable laws. You acknowledge that the Software contains valuable confidential information and trade secrets of Encore Electronics, Inc. and/or its third party licensors.
5. Warranty Disclaimer. THE SOFTWARE IS MADE AVAILABLE TO YOU ON "AS IS" BASIS. NO WARRANTIES, EITHER EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THIS SOFTWARE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
38 www.encore-usa.com
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES FOR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, AND ENCORE ELECTRONICS, INC. EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN. YOU ASSUME THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU, AND NOT ENCORE ELECTRONICS, INC. OR AN AUTHORIZED RESELLER, ASSUME THE ENTIRE COST OF NECESSARY SERVICING, REPAIR, OR CORRECTION. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. YOUR SOLE REMEDY AND THE ENTIRE LIABILITY OF ENCORE ELECTRONICS, INC. ARE SET FORTH ABOVE.
6. No Liability for Consequential Damages. YOU AGREE THAT IN NO EVENT SHALL ENCORE ELECTRONICS, INC. OR ITS AGENTS BE LIABLE FOR ANY LOSS OF ANTICIPATED PROFITS, LOSS OF DATA, LOSS OF USE, BUSINESS INTERRUPTION, COST OF COVER OR ANY OTHER INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY (WHETHER FOR BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE), EVEN IF ENCORE ELECTRONICS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL ENCORE ELECTRONICS, INC. BE LIABLE TO YOU FOR DAMAGES IN AN AMOUNT GREATER THAN THE FEES PAID FOR THE USE THE FOREGOING LIMITATIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAWS IN YOUR JURISDICTION.
7. Export. You will not export or re-export the product incorporating the Software without the appropriate United States or foreign government licenses.
8. U.S. Government Restricted Rights. If you are a unit or agency of the United States government, the Software and related documentation are deemed to be "commercial computer software" and "commercial computer software documentation," respectively, pursuant to DFAR Section 227.7202 and FAR Section 12.212(b), as applicable. Any use, modification, reproduction, release, performing, displaying or disclosing of the Software and/or the related documentation by the United States government shall be governed solely by the terms of this Agreement and shall be prohibited except to the extent expressly permitted by the terms of this Agreement. Any technical data provided that is not covered by the above provisions is deemed to be "technical data commercial items" pursuant to DFAR Section 227.7015(a). Any use, modification, reproduction, release, performing, displaying or disclosing of such technical data shall be governed by the terms of DFAR Section 227.7015(b).
9. Termination. THIS AGREEMENT SHALL BE EFFECTIVE UPON INSTALLATION OF THE SOFTWARE AND SHALL TERMINATE UPON THE EARLIER OF: (i) YOUR FAILURE TO COMPLY WITH ANY TERM OF THIS AGREEMENT; OR (ii) RETURN, DESTRUCTION OR DELETION OF ALL COPIES OF THE SOFTWARE IN YOUR POSSESSION. Encore Electronics, Inc.'s rights and your obligations shall survive the termination of this Agreement.
10. High Risk Activities. The Software is not fault-tolerant and is not designed or intended for use in hazardous environments requiring fail-safe performance, or any other application in which the failure of the Software could lead directly to death, personal injury, or severe physical or
39 www.encore-usa.com
property damage (collectively, "High Risk Activities"). Encore Electronics, Inc. EXPRESSLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
11. Governing Law and Jurisdiction. This Agreement will be governed by and construed under the laws of the State of California. and the United States as applied to agreements entered into and to be performed entirely within California., without regard to conflicts of laws provisions thereof and the parties expressly exclude the application of the United Nations Convention on Contracts for the International Sales of Goods. Suits or enforcement actions must be brought within, and each party irrevocably commits to the exclusive jurisdiction of the state and federal courts located in Santa Clara County.
Appendix G. User’s Notice
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us.
WE PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL US, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS), EVEN IF WE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by us; or (2) the serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent infringe.
Windows® 7, Windows Vista® and Windows® XP are registered trademarks of Microsoft® Corporation.
Adobe® and Acrobat® are registered trademarks of Adobe Systems Incorporated.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY US. WE ASSUME NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
40 www.encore-usa.com
Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. All trademarks and brand names are the properties of their respective holders.
* Local tech-support numbers are provided in selected countries. Service may change without prior notice. Please visit our website for more details.
© 2010 Encore Electronics, Inc. All rights reserved.COVER
Las especi
© 2011
ficaciones, tamaño y forma del producto están sujetos a cambios sin previo aviso, y la apariencia real del producto puede diferir de la
presentada aquí. Las marcas y nombres comerciales son propiedad de sus respectivos dueños.
Encore Electronics, Inc.
1www.encore-usa.com
TABLA DE CONTENIDOS
CAPÍT ....................................................................ULO 1 3
1.1 ...................................... 3
........................................................................ 4
1.3 4
...................................... 4
CAPÍTULO ...................................... 5
...................................... 5
........................................ 6
2.2.1 ...................................... 6
2 ........................................ 9
2.3 ELIMINACIÓN DEL SOFTWARE DE ENUWI-1X4X.................... 12
2.4 I-1X4X ............. 12
ICAS EN WINDOWS
..................................... 14
CAPÍTULO ICAS EN WINDOWS
.................................... 16
CAPÍTULO 5: CONEXIÓN A REDES INALÁMBRICAS EN WINDOWS®
XP............................................................................................ 18
CAPÍTULO 6: SOPORTE TÉCNICO........................................................... 21
CAPÍTULO 7: INFORMACIÓN DE GARANTÍA ........................................ 21
APÉNDICE A. INFORMACIÓN GENERAL SOBRE LA SEGURIDAD
INALÁMBRICA ...................................................................... 22
A1. COMPARACIÓN ENTRE WEP, WPA Y WPA2 .......................... 22
A2. WEP / WPA / WPA2 802.1X ................................................. 22
: INTRODUCCIÓN
DESCRIPCIÓN DEL PRODUCTO ............
1.2 INDICADOR LED
CONTENIDO DEL PAQUETE ........................................................
1.4 REQUERIMIENTOS DEL SISTEMA .........
2: INSTALACIÓN ..................................
2.1 INSTALACIÓN DEL HARDWARE .............
2.2 INSTALACIÓN DEL SOFTWARE............
Windows® 7 y Windows Vista®........
2.2. Windows® XP...................................
ACTUALIZACIÓN DEL SOFTWARE DEL ENUW
CAPÍTULO 3: CONEXIÓN A REDES INALÁMBR
7® ........................................................
4: CONEXIÓN A REDES INALÁMBR
VISTA®................................................
2www.encore-usa.com
DOWS® ............................... 23
DICE B.
.................................... 24
ER .............................. 24
WIRELESS MANAGER 25
.................................... 27
................................................... 29
B4.1. tón) ............................ 30
. n Personal) .............. 31
..................................... 33
ICAS CON
EN WINDOWS XP® 34
37
APÉNDICE E. INFORMACIÓN REGULATORIA....................................... 38
DE LA COMISIÓN FEDERAL
DE COMUNICACIONES ......................................................................................... 38
E2. EUROPA – DECLARACIÓN DE CONFORMIDAD CE ................... 39
APÉNDICE F. CONTRATO DE LICENCIA DE USUARIO FINAL.......... 42
APÉNDICE G. AVISO PARA EL USUARIO ............................................... 44
Las especificaciones, tamaño y forma del producto están sujetos a cambios sin previo
aviso, y la apariencia real del producto puede diferir de la presentada aquí.
Las marcas y nombres comerciales son propiedad de sus respectivos dueños.
© 2010 Encore Electronics, Inc. Derechos reservados.
A3. HABILITACIÓN DE 802.1X EN WIN
APÉN UTILIZANDO ENCORE WIRELESS MANAGER EN
WINDOWS XP®.................................
B1. INICIAR EL ENCORE WIRELESS MANAG
B2. INFORMACIÓN GENERAL DEL ENCORE
B3. CONEXIÓN MANUAL.............................
B4. FÁCIL CONEXIÓN CON WPS
WPS — PBC (Configuración de Bo
B4.2 WPS — PIN (Número de Informatio
B5. UTILIZANDO 802.1X ...........................
APÉNDICE C. CONEXIÓN A REDES INALÁMBR
WIRELESS ZERO CONNECTION
APÉNDICE D. ESPECIFICACIONES ..........................................................
E1. DECLARACIÓN DE INTERFERENCIA
3www.encore-usa.com
Capítulo 1: Introducción
Gracias por escoger el Adaptador Inalámbrico USB N150 de E
unos pocos pasos, usted estará disfrutando de la comodid
una velocidad mucho más rápida que la anterior tecnología
ncore Electronics. Con sólo
ad de las redes inalámbricas a
Wireless G. Coloque el
desee evitando la molestia y la
cifrado de datos de
sus datos y privacidad.
USB N150 de Encore Electronics, puede navegar sin
problemas por sitios webs, jugar, transmitir video, hacer llamadas telefónicas y descargar
archivos de la Internet. ente con otros usuarios y acceder
a dispopositivos periféricos, t resoras y cámaras, en la red
de su hogar u oficina.
1.1 Descripción del Produ
B.
C.
Not
Tam
adapt
computador portátil o de escritorio en cualquier lugar que
vista anti-estética de los cables. Además, ENUWI-1X4x provee
Acceso Protegido Wi-Fi (WPA/WPA2) que le ayuda a proteger
Con el Adaptador Inalámbrico
Puede compartir archivos fácilm
ales como unidades de red, imp
cto
A. Mini Adaptador USB
Antena Externa Desmontable*
Conector de Antena
a:
* La antena que se muestra en la foto
a la izquierda, es una antena de 2dBi.
bién se encuentra disponible el
ador con otros tipos de antenas.
www.encore-usa.com
4
El LED de actividad parpadeará cuando:
uscando redes inalámbricas disponibles.
El adaptador esté transmitiendo y/o recibiendo datos.
Adaptador Inalámbrico USB N150 x 1
CD de In ión (Manual de Usuario en el CD) x 1
1.4 Requerimientos del Sistema
Un puerto USB disponible
Sistema Operativo: Windows® 7, Windows Vista® o Windows® XP Mac OS Linux
Unidad de CD-ROM
1.2 Indicador LED
El adadptador esté b
1.3 Contenido del Paquete
Antena Externa, Desmontable x 1
stalac
5www.encore-usa.com
ión
rte posterior del adaptador
2. Inserte el adaptador inalámbrico en un puerto USB disponible de su computador.
3. Por favor, refiérase a la sección siguiente para completar la instalacion del
controlador.
Capítulo 2: Instalac
2.1 Instalación del Hardware
1. Conecte la antena externa al conector situado en la pa
inalámbrico.
6www.encore-usa.com
are
Los procedimientos de inst s® 7 y Windows Vista®.
A.
are
Los procedimientos de inst s® 7 y Windows Vista®.
A.
2.2 Instalación del Softwtw
2.2.1 Windows® 7 y Windows Vista® 2.2.1 Windows® 7 y Windows Vista®
alación son similares para Windowalación son similares para Window
1. Haga clic en “Cancel,”
Si aparece la ventana ‘Found New Hardware
ara el Nuevo Hardware
B. Introduzca el ”CD de Instalación” que viene con el paquete, en la unidad de CD-ROM.
Dependiendo de la configuración de su computador, ocurrirá uno de los siguientes 3
escenarios (B-1 a B-3).
1
Wizard’ (Asistente p
Encontrado).
B-
te aparecerá la ‘Ventana de
Bienvenida de Encore’, y luego se mostrará
Quick Setup’ en el Paso C.
B-2
En lugar de la ‘Ventana de Bienvenida de
Encore’, aparecerá la ventana ‘AutoPlay’
(AutoEjecutar).
Seleccione “Run autorun.exe.”
Automáticamen
la ventana ‘
ENUWI-1X4x
7www.encore-usa.com
B-3
c
Si no apare
Bienvenida d
‘AutoP
cen la ‘Ventana de
e Encore’ ni la de
lay’ (AutoEjecutar), escriba
“D:\autorun.exe” en la ventana de
“Run” en el menú Start omandos
(Inicio) (‘D’ es la letra de su
CD-ROM).
Si la ventana de comandos “Run” no
el menú Start (Inicio),
menú Start
unidad de
aparece en
vaya al → escriba
“run” en el “search box” (cuadro de
eda) → seleccione “Run” de la
lista de resultados.
Nota: Puede utilizar “Browse” (Examinar)
para encontrar la letra de la unidad de
CD-ROM.
C.
búsqu
Haga clic en “Software & Driver
ion Installat ” en la ventana
etup’.
D.
‘Quick S
Haga clic en “Yes” para continuar,
si aparece el mensaje ‘Do you want to
allow the following program to make
changes to this computer?’ (¿Desea
permitir que el siguiente programa
realice cambios en este equipo?) en la
ventana ‘User Account Control’ (Control
de Cuentas de Usuario).
www.encore-usa.com
8
F.
Haga clic en “Next” para continuar,
cuando vea la ventana ‘ENCORE
Wireless Manager’.
E.
co
Haga clic
softwa
en “Install this driver
re anyway,” (Instalar este
dor de todas formas)
l mensaje ‘Windows can’t
lisher of this driver
indows no puede
l editor de este software
controlador) en la ventana ‘Windows
eguridad de Windows).
G
controla
si aparece e
verify the pub
software’ (W
mprobar e
Security’ (S
1. Guarde c
los
ualquier archivo abierto de
otros programas;
2. Marque la opción “Yes, I want to
restart my computer now” (Si, deseo
reiniciar mi computador ahora),
3. Haga clic en “Finish” para reiniciar el
computador,
si aparece el mensaje ‘InstallShield
Wizard Complete’ (Asistente de
InstallShield Finalizado) en la ventana
‘ENCORE Wireless Manager’.
9www.encore-usa.com
2.2.2 Wind ®
A.
ows XP
1. Haga
clic en “Cancel,”
si aparece la ventana ‘Found New
Hardware Wizard’ (Asistente para el
Nuevo Hardware Encontrado) cuando
inicia Windows por primera vez luego de
hardware.
B. Introduzca el ”CD de Instalació n la unidad de CD-ROM.
Dependiendo de la configura r, ocurrirá uno de los siguientes 2
escenarios (B-1 a B-2).
B-1
instalado el
n” que viene con el paquete e
ción de su computado
Automáticamente aparecerá la
‘Ventana de Bienvenida de Encore’,
o se mostrará la ventana ‘Quick
n el Paso C.
B-2
y lueg
Setup’ e
Si no aparece la ‘Ventana de
Bienvenida de Encore’, escriba
“D:\autorun.exe” en la ventana de
comandos “Run” (Ejecutar) en el
menú Start (Inicio) (‘D’ es la letra
de su unidad de CD-ROM).
Nota: Puede utilizar “Browse” (Examinar) para
encontrar la letra de la unidad de CD-ROM.
www.encore-usa.com
10
C.
Haga clic en “Software & Driver
Installation ” en la ventana
‘Quick Setup’.
D. lic en “continue,”
si aparece el mensaje ‘A program needs
rmission to continue’ (Un
programa necesita de su permiso para
continuar) en la ventana ‘User Account
Control’ (Control de Cuentas de
Usuario).
E.
Haga c
your pe
Haga clic en “Next” para continuar,
cuando vea la ventana ‘ENCORE
Wireless Manager’.
11www.encore-usa.com
F.
Haga clic en “Continue Anyway”
odos modos),
si ve este mensaje de advertencia en la
ventana ‘Hardware Installation’
(Instalación de Hardware).
G.
(Continuar de t
1. Guarde cualquier archivo abierto de
rogramas;
opción “Yes, I want to
tart my computer now” (Si, deseo
reiniciar mi computador ahora),
3. Haga clic “Finish” para reiniciar el
computador,
si aparece el mensaje ‘InstallShield
Wizard Complete’ (Asistente de
InstallShield Finalizado) en la ventana
‘ENCORE Wireless Manager’.
otros p
2. Marque la
res
12www.encore-usa.com
el Software de ENUWI-1X4x
2.3 Eliminación d
En Windows 7® y Windows Vista®
Abra el menú de Windows Start (Inicio) → vaya a “Control Panel” (Panel de
Control) → haga clic en “Uninstall a program” (Desisntalar programa) bajo la
ría ‘Programs’ (Programas) → seleccione ‘ENCORE Wireless Manager -
lar) → siga las instrucciones en
catego
ENUWI-1X4x’ → haga clic en “Uninstall” (Desinsta
pantalla
En Windows XP®
Abra el menú de Windows Start (Inicio) → vaya al grupo de programas
ione “Uninstall - Encore Wireless
Manager” → siga las instrucciones en pantalla
e Windows Start (Inicio)
“Encore Wireless Manager” → selecc
Alternatively, abra el menú d → vaya a “Control
Panel” (Panel de Control) → seleccione “Add or Remove Programs” (Añadir o
s Manager - ENUWI-1X4x”
trucciones en pantalla
ación del Software del ENUWI-1X4x
Las actualizaciones estan disponibles en el sitio web de Encore Electronics
(www.encore-usa.com
Eliminar Programas) → seleccione “ENCORE Wireles
→ haga clic en “Remove” (Eliminar) → siga las ins
2.4 Actualiz
). Siga los siguientes pasos.
1. Anote el SSID (nombre de la red inalámbrica) y la contraseña (también llamada
clave de seguridad de red, frase de acceso o clave pre-compartida) para cualquier
red inalámbrica que desee conservar. Los perfiles de red almacenados serán
eliminados en la actualización.
2. Descargue la actualización desde la página SUPPORT del ENUWI-1X4x del sitio
web de Encore Electronics.
3. Elimine el software de ENUWI-1X4x de su computador.
4. Reinicie su computador.
13www.encore-usa.com
descomprimir primero el
6. Ejecute el archivo de actualización (terminado en .exe) que descargó previamente.
7. Siga las instrucciones en pantalla.
5. Si el archivo de actualización termina en .zip, necesitará
archivo.zip.
14www.encore-usa.com
®
Luego de la instalación, utilice el Windows Wireless Manager para conectarse a redes
inalámbricas siguiendo l
.
Capítulo 3: Conexión a Redes Inalámbricas en Windows 7
os siguientes pasos.
A
Haga click izquierdo en el “Ícono de
s Wireless Manager en la
Bandeja de Sistema
Window
.”
B.
Si no ve el ícono, haga clic en la flecha
Show hidden icons “ ” (Mostrar
íconos ocultos) en la bandeja del
C.
sistema.
1. Sele
Conn
In
ccione la “Wireless Network
ection” (Conexión a Red
alámbrica) de su preferencia;
en “Connect.”
n “Connect automatically”
tomáticamente) se
tivada por defecto. Su
computador se conectará
automáticamente a la misma red
inalámbrica la próxima vez que se
encuentre en el mismo lugar.
Nota: Si la seguridad inalámbrica no está
activada, aparecerá el mensaje de
advertencia ‘Information sent over this
network might be visible to others.’ (La
información enviada a través de esta
red podría ser visible por otros). Haga
clic en “Connect” si desea continuar. El
Paso D será omitido.
2. Haga clic
Nota: La opció
(Conectar au
encuentra ac
15www.encore-usa.com
D.
1. Introduzca el “Security Key” (Clave de
Seguridad) (también llamada
contraseña, frase de acceso o clave
pre-compartida);
2. Haga clic en “OK.”
E.
Una vez conectado, podrá ver las
actualizaciones:
1. Cuando haga clic izquierdo
siguientes dos
en el
‘Ícono de Windows Wireless
Manager en la Bandeja de Sistema,’
verá la palabra ‘Connected’ próxima a
la red inalámbrica que seleccionó.
2. El ‘Ícono de Windows Wireless
Manager en la Bandeja de Sistema’
ará a cambi .
Nota: Para obtener ayuda acerca delWindows Wireless Manager (Administrador de Redes Inalámbricas de Windows), consulte “Help and Support” (Ayuda y Soporte
Técnico) en el menú Start en la esquina inferior izquierda de su pantalla.
16www.encore-usa.com
Conexión a Redes Inalámbricas en Windows
Después de la instalac r para conectarse a redes
inalámbricas siguiendo l
Capítulo 4:
Vista®
ión, utilice el Windows Wireless Manage
os siguientes pasos.
A.
Haga click izquierdo en el ‘Ícono de
ows Wireless Manager en la
andeja de Sistema
Wind
B .’
B.
Haga clic en “
(Conectarse a
Connect to a network.”
una red)
O en “Network and Sharing
center.” (Centro de Redes y
Recursos Compartidos))
C.
(N
1. Seleccione la “red Inalámbrica” de su
ia;
en “Connect.”
D.
preferenc
2. Haga clic
1. Ingrese la “Security Key” (Clave de
Seguridad) (también llamada
contraseña, frase de acceso o clave
pre-compartida);
2. Haga clic en “Connect.”
Nota: Si la seguridad inalámbrica no está
activada, aparecerá el mensaje de
advertencia ‘Information sent over this
network might be visible to others.’ (La
información enviada a través de esta
17www.encore-usa.com
red podría ser visible por otros).
Connect Anyway” si desea
E.
Seleccione “
continuar.
1. Las opciones “Save this network”
(Guardar esta red) y “Start this
connection automatically” (Iniciar
esta conexión automáticamente) se
n activadas de forma
predeterminada;
2. Haga clic en “Close.”
ión “Start this connection
” está activada, su
se conectará
ticamente al mismo sitio la próxima
F.
encuentra
Note: Si la opc
automatically
computador
automá
vez.
Pued
Netwo
e aparecer la ventana ‘Set
rk Location’.
ione uno de los tres siguientes
bicación: “Home” (Casa),
” (Trabajo) o “Public”
(Público).
clic en “Close” en la ventana de
seguimiento.
Nota: De acuerdo a su selección,
Windows automáticamente hará los
ajustes apropiados en el cortafuego.
G.
1. Selecc
tipos de u
“Work
2. Haga
El ‘Ícono de Windows Wireless
Manager en la Bandeja de Sistema
mostrará un globo en su esquina
inferior derecha ( ).
Nota: Para obtener ayuda acerca de Windows Wireless Manager (Administrador de Redes Inalámbricas de Windows), consulte “Help and Support” (Ayuda y Soporte
Técnico) en el menú en la esquina inferior izquierda de su pantalla.
18www.encore-usa.com
® XP
ono Encore Wireless Manager
(Administrador Inalámbrico de Encore) en la Bandeja de Sistema, en la esquina inferior
derecha de su pantalla como se muestra en la Figura A, a continuación.
Capítulo 5: Conexión a Redes Inalámbricas en Windows
Luego de instalar el software, podrá localizar el Íc
Figura A. Ubicación del Ícono del Gestor Inalámbrico de Encore en la Bandeja de Sistema
Ícono Descripción
El ENUWI-1X4x está conectado a una red inalámbrica con
una conexión de excelente calidad.
El ENUWI-1X4x no está conectado a una red inalámbrica.
La página siguiente le proporciona una guía paso a paso para conectarse a redes
inalámbricas con su adaptador inalámbrico.
19www.encore-usa.com
Por favor, siga los pasos siguie alámbricas.
A.
ntes para conectarse a redes in
1. Haga click derecho en el ‘Ícono
core Wireless Manager en la
Bandeja de Sistema’ en la esquina
erecha de la pantalla;
lic en “Set Wizard.”
(Establecer Asistente)
B.
En
inferior d
2. Haga c
1. Seleccione “Wireless Local Area
Networks (Infrastructure)” (Redes
Inalámbricas de Area Local
ctura));
clic en “Next.”
C.
(Infraestru
2. Haga
1. Seleccione el ‘SSID’ (nombre de la red
ica) a la que se desea
ar.
2. Haga clic en “Next.”
ccionado tiene la
seguridad inalámbrica activada, Encore
ager detectará
automaticamente la opción de seguridad.
D.
inalámbr
conect
Nota: Si el SSID sele
Wireless Man
Sólo ingrese y confirme la“Network
Key” (también llamada contraseña,
frase de acceso o clave
pre-compartida) de su enrutador o
punto de acceso,
cuando aparezca la ventana ‘Wireless
Network Properties’. (Propiedades de la
Red Inalámbrica)
Nota: Para la mayoría de los usuarios, no
www.encore-usa.com
20
se necesita hacer cambios en ‘Network
n’ (Autenticación de Red)
ryption’ (Cifrado de Datos).
E.
Authenticatio
y ‘Data enc
2. Haga c
exión se realiz
1. Las opcion
automatic
dirección
“Obtain DNS s
es “Obtain an IP address
ally” (Obtener una
IP automáticamente) y
erver address
ally” (Obtener la dirección
or DNS automáticamente)
están seleccionadas por defecto en la
ventana ‘Setup TCP/IP’ (Configurar
TCP/IP).
mayoría de los usuarios, no
estas dos opciones.
lic en “Finish.”
F. Dos maneras de saber si la co ó exitosamente:
F-1Inalámbrico de Encore
automatic
del servid
Nota: Para la
se necesita cambiar
n
Ícono en la Bandeja del Gestor
F-1 El ‘Ícono
en la Ba
esquina
Encore Wireless Manager
ndeja de Sistema’ en la
inferior derecha de la pantalla
se volverá verde .
Nota: El ‘Ícono Windows Wireless
Manager en la Bandeja de Sistema’’
cambiará a .
F-2 Gestor inalámbrico Encore
F-2 Las barras de ‘Signal Strength’
(Fuerza de la Señal) y ‘Link Quality’
(Calidad del Enlace) en la pestaña
‘General’ en el Encore Wireless
Manager se volverán activas y de
color verde.
21www.encore-usa.com
Capítulo 6: Soporte Técnico
RT (Soporte Técnico) en nuestro
Si tiene otras preguntas, visite primero la sección SUPPO
sitio web www.Encore-USA.com. Puede enviar su solicitud
nuestro sitio web. Puede también comunicarse con n
de soporte directamente en
osotros a través de las líneas
telefónicas directas o mediante las direcciones de correo electrónico que aparecen en la
parte posterior de este manual. Nuestros experimentados representantes de soporte
eguntas técnicas.
Capítulo 7: Información de Garantía
Visite la sección TERMS AND POLICIES (Términos y Políticas) en nuestro sitio web
www.Encore-USA.com
técnico están listos para ayudarle con cualquiera de sus pr
para obtener información más detallada.
22www.encore-usa.com
Apéndice A. eral sobre la Seguridad Inalámbrica
a. Cuando se
lguno de e ada dispositiv inalá utilizar la MiSMA opción de
seguridad ina de segu (también llamada contraseña, frase de acceso
pre-compartida). De lo contrario, ám nará apropiadamente.
Nombre EP
ent Priv
WPA - PSK Access
hared Key)
WPA2 - PSK (Wi-Fi Protected Access 2
— Pre-Shared Key)
Información Gen
A1. Comparación entre WEP, WPA y WPA2
WEP, WPA-PSK y WPA2-PSK son opciones estándares de seguridad inalámbric
utiliza a llos, c o en la red mbrica DEBE
lámbrica y clave ridad de red
o clave la red inal brica no funcio
W
(Wired Equival acy) — Pre-S(Wi-Fi Protected
Llamad
también ----
A - Personal
o WPA
WPA2 - Personal
o WPA2
o WP
Nivel de básic
Seguridad o fuerte Más fuerte
Formato de
Clave de 10 o 26 caracteres
hexadecimales Frase de ac
Co a (Una clave hexadecimal es una
ción de y
ero
ceso de 8- a 63- caracteres
(Una frase de acceso es una
ación de letras del alfabeto y
números.)
ntraseñcombina letras, a – f,
núm s, 0 – 9.)
combin
A2. WEP / WPA / WPA2 802.1X
con el uso de un servidor
RADIUS y con la configuración de certificados digitales. Cada usuario debe proveer su
nombre, contraseña y certificado digital con el fin de acceder a la red inalámbrica.
Nombre WEP 802.1X WPA 802.1X WPA2 802.1X
802.1X es para usuarios avanzados que están familiarizados
Llamado
también WEP Dinámica WPA - Enterprise WPA2 - Enterprise
Nivel de
Seguridad básico fuerte más fuerte
Nota: WEP es un algoritmo de seguridad inalámbrica obsoleto. Existen programas disponibles para
romper el cifrado WEP en minutos. Sin embargo, WEP es utilizado ampliamente y es a veces la
opción de seguridad inalámbrica por defecto en dispositivos inalámbricos más viejos.
23www.encore-usa.com
A3. Habilitación de 802.1X en Windows®
d en redes inalámbricas
n de cuentas de usuarios.
Normalmente se requiere de un certificado digital o tarjeta inteligente para completar la
autenticación. La autenticac usada típicamente para conexiones de trabajo y
opiadamente.
ista
La autenticación 802.1X puede ayudar a mejorar la segurida
802.11 y redes cableadas Ethernet con la verificació
ión 801.1X es
requiere de profesionales de TI para configurar el sistema apr
® ®Windows 7 y Windows V
1. Haga click izquierdo en el “Ícono de Windows Wireless
de Sistema” (
Manager en la Bandeja
o en Windows 7 o en Windows Vista), y luego abra
Recursos Compartidos).
edes Inalámbricas).
“Network and Sharing Center” (Centro de Redes y
2. Abra “Manage Wireless Networks” (Administrar R
3. Haga click derecho en la red donde desea habilitar la autenticación 802.1X, y luego
4. Haga clic en la pestaña “Security” (Seguridad), y luego, en la lista “Security Type”
(Tipo de Seguridad) 802.1X.”
5. En la lista “Encryption Type” (Tipo de Cifrado), haga clic en el tipo de cifrado
p r el enrutador o punto de acceso.
6. En la lista “Choose a network authentication method” (Elija un método de
autenticación de red), haga clic en el método que corresponda con el servidor
RADIUS.
7. Para realizar ajustes adicionales, haga clic en “Settings.” (Configuración)
Windows® XP
haga clic en “Properties.” (Propiedades)
, haga clic en “
utilizada o
Por favor consulte “Help and Support” (Ayuda y Soporte Técnico) en el menú
Start (Inicio). .
24www.encore-usa.com
ice B. Utilizando Encore Wireless Manager en Windows
re Wireless Manager es el administrador de redes inalámbricas por defecto en
s Wizard le ayuda a conectarse rápidamente a
la red inalámbrica, Encore Wireless Manager le proporciona más control sobre su red
B1. Iniciar el Encore Wireless Manager
s:
1. Desde el Ícono de Encore Wireless Manager en la Bandeja del Sistema —
Apénd
XP®
El Enco
Windows XP. Mientras que Encore Wireles
inalámbrica.
Usted puede abrir el Encore Wireless Manager de tres manera
Haga click izquierdo en el ‘Ícono de Encore Wireless Manager en la Bandeja
ina inferior derecha de su pantalla, y luego seleccione
“Open Config Utility.” (Abrir Utilidad de Configuración)
2. Desde el Ícono de Encore Wireless Manager en el Escritorio —
de Sistema’ en la esqu
Haga doble clic en el ícono del escritorio.
3. Desde el menú Start (Inicio) de Windows —
1. Abra el menú Start de Windows en la esquina inferior izquierda de su pantalla.
2. Localice el grupo de programa de ‘ENCORE Wireless Manager’.
3. Seleccione la opción “ENCORE Wireless Manager”.
25www.encore-usa.com
B2. Información General del Encore Wireless Manager
uperiorBarra de Herramientas S
Set Wizard: ia el Encore Wireless Wizard (Asistente Inalámbrico Encore)
inic
About: muestra la versión del software.
Pestañas
General: muestra la información sobre el estado de la conexión.
Profile: muestra las redes inalámbricas guardadas previamente.
Available Network: muestra la lista de redes inalámbricas disponibles en su
ubicación actual.
Status: muestra la información detallada sobre el estado de la conexión.
Statistics: muestra la cantidad de datos que es transmitida y rescibida.
Wi-Fi Protected Setup: le permite conectarse a una red inalámbrica sin introducir ni
memorizar ninguna contraseña inalámbrica (también llamada
clave de red, frase de acceso o clave pre-compartida). Para
obtener más información, consulte la página 29.
www.encore-usa.com
26
Casillas de Verificación Inferiores
el Ícono de Encore Wireless
aparezca en la esquina inferior
derecha de su pantalla.
Disable Ad utilizar sólo un adaptador inalámbrico a la vez. Si
cilmente puede
a casilla.
Radio Off: WI-1X4x no podrá conectarse a cualquier red
Encore Wireless Manager y
el Windows Wireless Manager (también llamado Wireless Zero
Configuration o Configuración Inalámbrica Rápida) al mismo
tiempo. Si desea utilizar el Windows Wireless Manager, es
necesario marcar primero esta casilla.
Nota: La casilla de opción de “Windows Zero Config” puede no aparecer a veces.
Cuando esto sucede, puede ir al menú Start (Inicio)
Show Tray Icon: está marcada por defecto. Permite que
Manager en la Bandeja de Sistema
apter: Se recomienda
desea utilizar otro adaptador inalámbrico, fá
deshabilitar el ENUWI-1X4x marcando est
Si está marcada, el ENU
inalámbrica.
Windows Zero Config: En Windows XP, no puede utilizar el
→ “Control Panel” (Panel de
Control) → ”Settings” (Propiedades) →”Administrative Tools” (Herramientas
Administrativas) → “Services” (Servicios), y luego habilitar manualmente el “Wireless
Zero Configuration.”
27www.encore-usa.com
B3. Conexión
A.
Manual
1. Vaya a la pestaña “Available Network”
sponibles);
2. Seleccione el “SSID” (nombre de red
a) de su preferencia;
clic en “Add to Profile” (Añadir
erfil);
d seleccionada tiene seguridad
ca habilitada, Encore
anager detectará
automaticamente la opción de
inalámbrica.
a de advertencia de
‘Unsecured Network’’ (Red Insegura)
si la seguridad inalámbrica no
habilitada.Haga clic en “OK”
si desea continuar.
B.
(Redes Di
inalámbric
3. Haga
P
4. Si la re
inalámbri
Wireless M
seguridad
Nota: La ventan
aparecerá
se encuentra
Sólo ingrese y
Key” (Cla
confirme la “Network
ve de Red) (también llamada
contraseña, frase de acceso o clave
pre-compartida) del enrutador o punto
de acceso,
cuando vea la ventana de ‘Wireless
Network Properties’ (Propiedades de
Redes Inalámbricas).
Nota: Para la mayoría de los usuarios, no
es necesario cambiar ‘Network
Authentication’ (Autenticación de Red)
ni ‘Data encryption.’ (Cifrado de Datos)
www.encore-usa.com
28
C.
Una vez co
automática
pestaña
nectado, la pestaña
mente cambiará hacia la
“General”. Las barras ‘Signal
th’ (Fuerza de la Señal) y ‘Link
alidad de la Señal) se
n activas y de color verde.
Nota: El ‘Ícono de Encore Wireless
Manager de la Bandeja del Sistema’ en
la esquina inferior derecha se volverá
también de color verde.
Streng
Quality’ (C
volverá
29www.encore-usa.com
B4. Fácil Conexión con WPS
i) permite a su computador
arse a un enrutador inalámbrico o punto de acceso sin una clave de seguridad de
red (también llamada contraseña, frase de acceso o clave pre-compartida). Por favor,
ador o punto de acceso para ver si es compatible
Existen dos métodos de conexión disponibles para WPS:
Configuración de Botón (PBC - Push Button Configuration)
Número de Información Personal (PIN - Personal Information Number).
Las instrucciones se muestran en las dos páginas siguientes.
Wi-Fi Protected Setup (WPS - Configuración Protegida Wi-F
conect
revise el manual de usuario de su enrut
con WPS.
30www.encore-usa.com
B4.1. WPS — PBC (Configuración de Botón
La Configuración de Botón (PBC) permite a su comput
inalámbrica haciendo clic a un botón. Usted no n
seguridad inalámbrica de su e
)
ador conectarse a una red
ecesita memorizar la contraseña de
nrutador o punto de acceso. Por favor, revise
saber si es
ne con un
ícono como el que se muestra a la derecha.
Nota: Antes de empeza utador a poca distancia uno del
otro. Esto es sólo tempo utador donde usted quiera.
A.
el manual de usuario de su enrutador o punto de acceso para
compatible con WPS - PBC. Normalmente, el botón PBC vie
r, tenga su enrutador inalámbrico y su comp
ral. Puede colocar luego su enrutador o comp
1. Vaya a la p
Setup”.
estaña “Wi-Fi Protected
clic en “Push Button Config
os siguientes dos minutos
2. Haga
(PBC).”
3. Dentro de l ,
e el botón WPS-PBC en su
enrutador o punto de acceso.
iones en el
anual de usuario de su enrutador o punto
de acceso.
B.
presion
Nota: Por favor siga las instrucc
m
Una vez conectado, la pestaña
automáticamente cambiará hacia la
pestaña “General”. Las barras ‘Signal
Strength’ (Fuerza de la Señal) y ‘Link
Quality’ (Calidad de la Señal) se
volverán activas y de color verde.
Nota: El ‘Ícono de Encore Wireless
Manager de la Bandeja del Sistema’ en
la esquina inferior derecha se volverá
también de color verde.
31www.encore-usa.com
n Personal)
putador se conecte a una
adaptador a su enrutador o punto de acceso.
lámbricas, usted no necesita
o de su enrutador o punto
patible con WPS - PIN.
rutador o punto de acceso,
B4.2. WPS — PIN (Número de Informatio
El Número de Información Personal (PIN) permite que su com
red inalámbrica ingresando el código PIN del
A diferencia de las contraseñas de seguridad de las redes ina
memorizar el código PIN. Por favor, revise el manual de usuari
de acceso para saber si es com
Nota: Para introducir el código PIN de su adaptador en su en
necesita saber la dirección IP de su enrutador o punto de ac
uno de los siguientes escenarios:
ceso. Además, necesita tener
Un computad utador o punto de acceso
mediante un uede ser el único con el
ENUWI-1X4x
Un computador acceso a traves de una
conexión inalá laptop.
A.
or directamente conectado al enr
a conexión cableada. Este computador p
instalado o uno diferente.
ya conectado al enrutador o punto de
mbrica. Por ejemplo, éste podría ser su
1. Vaya hacia
Protect
la pestaña “Wi-Fi
ed Setup”.
2. Haga clic en “Pin Input Config (PIN)”
3. Dentro de los siguientes dos minutos,
introduzca el código PIN del
ENUWI-1X4 en la Utilidad Web de su
enrutador o punto de acceso mediante
un navegador web.
Nota: Para completar el Paso 3, necesita
saber la dirección IP de su enrutador o
punto de acceso para acceder a su
Utilidad Web.
www.encore-usa.com
32
B.
Una vez co
automática
pestaña
nectado, la pestaña
mente cambiará hacia la
“General”. Las barras ‘Signal
th’ (Fuerza de la Señal) y ‘Link
alidad de la Señal) se
n activas y de color verde.
Nota: El ‘Ícono de Encore Wireless
Manager de la Bandeja del Sistema’ en
la esquina inferior derecha se volverá
también de color verde.
Streng
Quality’ (C
volverá
33www.encore-usa.com
dos con el uso del serividor
s redes en los lugares de
802.1X para reforzar el control de la red. Cuando se conecta a
una red inalámbrica usandoseguridad WEP/WPA/WPA2 con 802.1X, es necesario
proporcionar dos tipos de información en la ventana ‘Wireless Network Properties’
(Propiedades de la Red Inalámbrica).
B5. Utilizando 802.1X
802.1X es para usuarios más avanzados que están familiariza
RADIUS y con la configuración de certificados digitales. La
trabajo a menudo utilizan
Debe seleccionar el protocolo de autenticación que el servidor RADIUS está
utilizando.
User Credential Section:
Debe proporcionar nombre de usuario, contraseña y/u otros certificados digitales
solicitado por el servidor RADIUS.
Nota: Para obtener mayor información, consulte con un especialista de TI.
Authentication Method Section:
34www.encore-usa.com
Inalámbricas con Wireless
s XP®
Alternativamente, puede utilizar el Administrador de Redes Inalámbricas de Windows
(también llamado Wireless Zero Conn rse a redes inalámbricas
en Windows XP siguiendo los p
A.
Apéndice C. Conexión a Redes
Zero Connection en Window
ection o WZC) para conecta
asos siguientes.
‘W
1. Abra ‘En
2. Marque “
parte infe
core Wireless Manager.’
Windows Zero Config” en la
rior de la ventana.
utilizar en Windows
Connection’ y ‘Encore
ireless Manager’ al mismo tiempo para
es inalámbricas. Para
control al ‘Encore Wireless
nager,’ es necesario desmarcar
s Zero Config.’
Nota: Si la opción de “ en Encore Wireless Manager,
deberá ir al menú “Start (Inicio)
Nota: No puede
‘Wireless Zero
W
manejar red
devolver el
Ma
indow
Windows Zero Config” no aparece
” → “Control Panel” (Panel de Control) → ”Settings”
(Configuración) → “Administrative Tools” (Herramientas Administrativas) →
“Services” (Servicios), y luego habilitar “Wireless Zero Configuration.”
B.
1. Haga click derecho en el ‘Ícono de
Windows Wireless Manager en la
Bandeja de Sistema ;’
2. Haga clic en “View Available
Wireless Networks” (Ver Redes
Inalámbricas Disponibles).
35www.encore-usa.com
C.
1. Seleccione el ‘Wireless Network
Name’ (SSID) de su preferencia;
2. Haga clic en “Connect.”
D.
1. Ingrese y
(Clav
contraseña, frase de acceso o c
confirme la “Network key”
e de Red) (también llamada
lave
pre-compartida);
en “Connect.”
Nota: Si la seguridad inalámbrica no está activada, aparecerá el mensaje de advertencia
‘Information sent over this network might be visible to others.’ (La información
enviada a través de esta red podría ser visible por otros). Seleccione “Connect
Anyway” si desea continuar.
E.
2. Haga clic
Una vez conectado, el texto
‘Connected’ aparecerá próximo a la
brica que seleccionó.
F.
red inalám
También, podrá ver dos actualizaciones en
la bandeja del sistema:
1. El ‘Ícono de Windows Wireless Manager en la Bandeja del Sistema’ cambiará a
.
2. El ‘Ícono de Encore Wireless Manager en la Bandeja del Sistema’ se volverá
36www.encore-usa.com
verde .
Nota: Para a tencia con Windows Wireless Mansis ager (Administrador de Redes Inalámbricas de Windows), consulte “Help and Support” (Ayuda y Soporte Técnico) en el
menú Start (Inicio) en la esquina inferior izquierda de su pantalla.
37www.encore-usa.com
dice D. Especif es
2.11n
IEEE 802.11g / Itiplexación co
ia Ortogonal (O
(D
ón
, 10, 120, 180
c ó )
0, 135, 15ón) para Tx
dBm
-8
de Modulaci
PSK / CCK / OFDM (BPSK / QPSK / 16-QAM / 64-QAM)
Protocolo de Acceso al Medio CSMA / CA with ACK
Potencia de Transmisión
16dBm típicamente @ 802.11b 14dBm típicamente @ 802.11g 13dBm típicamente @ 802.11n
Rango de Frequencia de la Red Inalámbrica
2.400 ~ 2.484 GHz
Certificaciones
FCC, CE, VCCI Clase B
Seguridad
Encriptación WEP de 64/128-bits WPA-PSK, WPA2-PSK, WPA-802.1X,
WPA2-802.1X
rvicio (QoS)
WMM
ertura
Interior: Hasta 100 metros (depende del factoe ambiental)
Exterior: Hasta 300 metros (depende ctoe ambiental)
Una antena desmontable con conector SMA
nóstico
o de Actividad
Temperatura en Funcionamiento
0 ~ 40 oC (32°~104°F)
tura de Almacenamiento
70 oC (-4°~158°F)
Humedad
En funcionamiento: 10% ~ 90% RH, sin condensación
Almacenamiento: 5%~90% RH, sin condensación
Canales
EEUU: 11 Europa: 13 Japón: 14
Compatibilidad del Controlador
Windows® 7, Windows Vista® y Windows® XP
Mac OS Linux
Apén icacion
Estándar
IEEE 80 IEEE 802.11g IEEE 802.11b
Tecnología de Radio
EEE 802.11n: n División de
Calidad de Se
MulFrequenc FDM)
IEEE 802.11b: Espectrode Secuencia Directa
Ensanchado Rango de Cob
SSS)
Interfaz
USB 2.0
Tasa de Transmisi
1, 2, 5.5, 6, 11 2, 18, 22, 24, 30, 36, 48, 54, 60, 9 , 240, 270, 300Mbps (auto dete
1, 2, 5.5, 6, 11, 12, 18ci n para Rx
LED de Diag, 22, 24, 30, 36,
48, 54, 60, 90, 12 0Mbps Estad
(auto detecci
Sensibilidad de Recepción
150Mbps Típico-68 54Mbps Típico -73dBm 11Mbps Típico 4dBm
-20 ~
Esquema ón
DBPSK / DQ
WPS
del fa
Antena
Tempera
38www.encore-usa.com
omisión Federal de
dispositivo digital de Clase Estos límites se han
interferencias perjudiciales encial. Este equipo genera, utiliza y puede emitir energía de
ra cuerdo con las instrucciones, puede causar in r radio. Sin embargo, no hay garantía de que no se . Si este equipo causa in lo cual puede determinarse
o intentar corregir la misma
eptora.
l está conectado actualmente.
istribuidor o con un técnico de radio o televisión para obtener ayuda.
s expresamente por la parte suario para operar este
spositivo cumple con la Parte 15 de las Normas de la FCC. La operación está sujeta a las siguientes dos condiciones: (1) Este dispositivo no puede causar
cualquier interferencia usar un funcionamiento no deseado.
NOTA IMPORTANTE:
Declaración de Exposición a la Radiation de la FCC:
Este equipo cumple con los límites de exposición a la radiación establecidos por la FCC para un entorno no controlado. Este equipo debe ser instalado y operado a una distancia mínima de aproximadamente ocho pulgadas (20 cm) entre el emisor y su cuerpo.
Este transmisor no debe ser colocado u operado junto con cualquier otra antena o
transmisor.
La disponibilidad de algunos canales específicos y/o bandas de frecuencia operacionales dependen del país y del firmware programado en la fábrica para que coincida con el destino deseado. La configuración del firmware no es accesible por el usuario final.
Apéndice E. Información Regulatoria
E1. Declaración de Interferencia de la C
Comunicaciones
Este equipo ha sido probado y cumple con los límites para unC, de conformidad con el apartado 15 de las Normas de la FCC. diseñado para proporcionar una protección razonable contra en una instalación resid
diofrecuencia y, si no se instala y utiliza de aterferencias en las comunicaciones po produzcan interferencias en una instalación particular
terferencias que afectan la recepción de radio o televisión,apagando y encendiendo el equipo, se le recomienda al usuariutilizando una o más de las medidas:
- Oriente nuevamente o cambie de lugar la antena rec
- Aumente la separación entre el equipo y el receptor.
- Conecte el equipo a un tomacorriente diferente al cua
- Consulte al d
Aviso de la FCC: Cualquier cambio o modificación no aprobadoresponsable del cumplimiento, podría anular la autoridad del uequipo.
Este di
interferencias perjudiciales y (2) este dispositivo debe aceptar recibida, incluyendo interferencias que puedan ca
39www.encore-usa.com
E
esenciales de la directiva R&TTE 1999/5/EC. eba han sido aplicados con el fin de demostrar la presunción de
esenciales de la Directiva R&TTE 1999/5/EC:
y estaciones s con las restricciones básicas
pos electromagnpeticos de MHz - 40 GHz) – Público en general
magnética y Espectro Radioeléctrico (ERM), Sistemas de ipos de transmisión de datos que operan en la banda ISM de
armonizado que cubre los
rico (ERM), Norma de atibilidad ElectroMagnética (EMC) para equipos de radio y servicios; Parte 1:
oeléctrico (ERM), Norma de servicios; Parte 17:
Condiciones específicas para los sistemas de transmisión de banda ancha de 2,4 GHz y los equipos RLAN de alto rendimiento de 5 GHz.
Este dispositivo es un sistema de transmisión de banda ancha de 2,4 GHz (transmisor-receptor), diseñado para ser utilizado en todos los estados miembro de la Unión Europea y en los países de la EFTA (Área de Libre Comercio Europea), a excepción de Francia e Italia, donde el uso es restrictivo.
En Italia, el usuario final deberá solicitar una licencia ante las autoridades de espectro nacional para obtener autorización de uso del dispositivo para el establecimiento de conexiones exteriores de radio y/o el suministro de acceso público a los servicios de telecomunicaciones y/o red.
Este dispositivo no puede ser utilizado para el establecimiento de conexiones de radio exteriores en Francia, y, en algunas áreas, la potencia de salida RF puede estar limitada a 10
E2. Europa – Declaración de Conformidad C
Este dispositivo cumple con los requerimientosLos siguientes métodos de pruconformidad con los requerimientos
EN 60 950-1: 2001 +A11: 2004
Seguridad en Equipos de Tecnología de Información
EN 50385: 2002
Norma del producto para demostrar el cumplimiento de las estaciones radio base terminales fijas para sistemas de telecomunicaciones inalámbricao niveles de referencia relacionados a la exposición humana a camradio frecuencia (110
EN 300 328 V1.7.1 (2006-10)
Asunto de Compatibilidad Electrotransmisión de banda ancha, Equ2,4 GHz y utiliza técnicas de modulación de ancho banda, ENrequisitos esenciales bajo el artículo 3.2 de la Directiva R&TTE
EN 301 489-1 V1.6.1 (2005-09)
Asunto de Compatibilidad Electromagnética y Espectro RadioeléctCompRequerimientos técnicos comunes
EN 301 489-17 V1.2.1 (2002-08)
Asuntode Compatibilidad Electromagnética y Espectro RadiCompatibilidad ElectroMagnética (EMC) para equipos de radio y
40www.encore-usa.com
mW (EIRP) en el rango de frecuencia de 2454 – 2483.5 MHz. Para obtener mayor información, el usuario final deberá pone acto con la autoridad de espectro nacional de Francia. rse en cont
0560
Česky [Czech tímto prohlašuje, že tento ENHWI-G2 je ve shodě se základními
ěrnice 1999/5/ES. ] požadavky a dalšími příslušnými ustanoveními smEncore Electronics Inc.
Dansk [Danisved, at følgende udstyr ENHWI-G2
e krav i direktiv 1999/5/EF. h] Undertegnede Encore Electronics Inc erklærer heroverholder de væsentlige krav og øvrige relevant
Deutsch [Geras Gerät ENHWI-G2 in ungen und den übrigen einschlägigen
EG befindet. man]
Hiermit erklärt Encore Electronics Inc, dass sich dÜbereinstimmung mit den grundlegenden AnforderBestimmungen der Richtlinie 1999/5/
Eesti [Estoniannitab Encore Electronics Inc seadme ENHWI-G2 vastavust direktiivi
ulenevatele teistele asjakohastele n] 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tsätetele.
Käesolevaga ki
English s ENHWI-G2 is in compliance with the
ns of Directive 1999/5/EC. Hereby, Encore Electronics Inc, declares that thiessential requirements and other relevant provisio
Español [Spare Electronics Inc declara que el ENHWI-G2 cumple con
osiciones aplicables o exigibles de la nish] los requisitos esenciales y cualesquiera otras dispDirectiva 1999/5/CE.
Por medio de la presente Enco
Ελληνική [GreΕΙ ΟΤΙ ENHWI-G2
ΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Encore Electronics Inc ΔΗΛΩΝΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [Freue l'appareil ENHWI-G2 est conforme ions pertinentes de la directive nch]
Par la présente Encore Electronics Inc déclare qaux exigences essentielles et aux autres disposit1999/5/CE.
Italiano [Italiara che questo ENHWI-G2 è conforme ai
nenti stabilite dalla direttiva 1999/5/CE. n] requisiti essenziali ed alle altre disposizioni pertiCon la presente Encore Electronics Inc dichia
Latviski [LatviI-G2 atbilst Direktīvas 1999/5/EK
noteikumiem. an] Ar šo Encore Electronics Inc deklarē, ka ENHWbūtiskajām prasībām un citiem ar to saistītajiem
Lietuvių [Lithuanian] HWI-G2 atitinka esminius reikalavimus
ir kitas 1999/5/EB Direktyvos nuostatas. Šiuo Encore Electronics Inc deklaruoja, kad šis EN
Nederlands [Dutch] Hierbij verklaart Encore Electronics Inc dat het toestel ENHWI-G2 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese] Hawnhekk, Encore Electronics Inc, jiddikjara li dan ENHWI-G2 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian] Alulírott, Encore Electronics Inc nyilatkozom, hogy a ENHWI-G2 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish] Niniejszym Encore Electronics Inc oświadcza, że ENHWI-G2 jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese] Encore Electronics Inc declara que este ENHWI-G2 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian] Encore Electronics Inc izjavlja, da je ta ENHWI-G2 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak] Encore Electronics Inc týmto vyhlasuje, že ENHWI-G2 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
41www.encore-usa.com
Suomi [Finnish] Encore Electronics Inc vakuuttaa täten että ENH1999/5/EY oleellisten vaatimusten ja sitä koskevie
WI-G2 tyyppinen laite on direktiivin n direktiivin muiden ehtojen mukainen.
Svenska [Swedish] Härmed intygar Encore Electronics Inc att denna ENHWI-G2 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
42www.encore-usa.com
NOS ("Contrato"). EL USO DEL SOFTWARE (definido más adelante) PROPORCIONADO POR ENCORE ELECTRONICS,
IDAD CON EL PRESENTE CONTRATO, NO USE EL
copia del Software incluido re"). Para cada licencia de
or o dispositivo de hardware rga, copia, carga en RAM o omputador o dispositivo de
ALQUILAR, ARRENDAR, ERIR EL SOFTWARE O
ORMIDAD CON EL desensamblar, descompilar,
r o de alguna forma esquivar do, sin limitación, cualquier
ionalidad del software, o (ii) s subyacentes, algoritmos, estructura u organización del
prohibidos por la legislación chos de uso del Software a n se transfieran junto con el
o en el empaque original, y/o ón original o actualizada del utador u otro dispositivo que
acepta todos los términos del are obtenido como prueba,
versión de prueba, u otra cosa que se especifique que no es para reventa. Es necesario un permiso de licencia especial de Encore Electronics, Inc. si el programa va a ser instalado en un servidor de red con el fin de distribuirlo a otros equipos.
3. Derecho de Autor. El Software que contiene este paquete o dispositivo está protegido por las leyes de derechos de autor de los Estados Unidos, las disposiciones de tratados internacionales, y todas las demás leyes nacionales aplicables. El software debe ser tratado como cualquier otro material con derechos de autor (por ejemplo, libros y grabaciones musicales). Esta licencia no permite que el Software sea alquilado o arrendado, y el material escrito que acompaña al software (si lo hay) no puede ser copiado.
4. Propiedad. Los títulos, derechos de propiedad y derechos de propiedad intelectual relacionados con el Software y la documentación adjunta, y cualquier copia de todo lo anterior, y cualquier contenido de muestra serán propiedad única y exclusiva de Encore Electronics, Inc. y/o terceros otorgantes de licencias. Usted se compromete a cumplir con la ley de derechos de autor y todas las leyes aplicables. Usted reconoce que el Software contiene valiosa
Apéndice F. Contrato de Licencia de Usuario Final
POR FAVOR LEA DETENIDAMENTE LOS SIGUIENTES TERMI
INC. ESTÁ PERMITIDO SOLAMENTE BAJO Y DE CONFORMACUERDO. SI NO ACEPTA A QUEDAR VINCULADO A ESTESOFTWARE. 1. Concesión de Licencia. Este Contrato le permite utilizar unaen este paquete o dispositivo en un solo computador ("SoftwaSoftware, el programa puede estar "en uso" en un solo computaden un momento dado. El Software está "en uso" cuando se descainstala en el disco duro u otra memoria permanente de un chardware.
2. Restricciones de la Licencia. USTED NO PUEDESUBLICENCIAR, VENDER, CEDER, PRESTAR O TRANSFCUALQUIERA DE SUS DERECHOS Y OBLIGACIONES DE CONFPRESENTE CONTRATO. Usted no puede modificar, traducir, desmontar o tratar (i) de debelar, evitar, eludir, eliminar, desactivalos mecanismos de protección del software en el Software, incluyenmecanismo de este tipo utilizan para restringir o controlar la funcpara obtener el código fuente o las ideaSoftware (excepto en la medida en que tales actividades no sean aplicable). Sin embargo, usted puede transferir todos sus dereotra persona u organización, siempre que (a) los siguientes tambiéSoftware, (i) este Contrato, (ii) otros programas si está contenidhardware con el cual el software está incluido, (iii) cualquier versiSoftware, (b) sin copias incluye respaldos e instalación en su compesté en su poder después de la transferencia, y (c ) el destinatario presente Contrato. En ningún caso, deberá transferir el Softw
43www.encore-usa.com
nics, Inc. y/o sus otorgantes
OSICIÓN "TAL CUAL COMO N RESPECTO A ESTE
ARANTÍAS IMPLÍCITAS DE Y LAS GARANTÍAS
ORE ELECTRONICS, INC. INDICADAS EN ESTE
Y RENDIMIENTO USTED, Y NO ENCORE
COSTO TOTAL DE TADOS NO PERMITEN LA LA EXCLUSIÓN ANTES TA GARANTÍA LE OTORGA
TROS DERECHOS QUE SOLUCIÓN Y LA
N ESTABLECIDAS EN LO
USTED ACEPTA QUE EN ONSABLES
DATOS, PÉRDIDA DE USO, A O CUALQUIER OTRO
O O DAÑOS EMERGENTES FTWARE POR CUALQUIER BILIDAD (YA SEA POR O NEGLIGENCIA) O DE TRONICS, INC. HA SIDO NINGÚN CASO, ENCORE
SO. LAS LIMITACIONES
ANTERIORES APLICAN LA EXTENSIÓN PERMITIDA POR LAS LEYES DE SU JURISDICCIÓN.
7. Exportación. Usted no podrá exportar o re-exportar el producto que se incorpora con el software sin las adecuadas licencias de los Estados Unidos o de gobiernos extranjeros.
8. Derechos restringidos del Gobierno de los EE.UU. Si se trata de una unidad o agencia del gobierno de los Estados Unidos, el Software y la documentación relacionada se consideran "software informático comercial" y "documentación de software informático comercial" respectivamente, de conformidad con DFAR Sección 227.7202 y FAR sección 12.212 (b), según sea el caso. Cualquier uso, modificación, reproducción, publicación, ejecución, muestra o divulgación del Software y/o documentación relacionada por el gobierno de los Estados Unidos se regirán exclusivamente por los términos de este Contrato y estará prohibido excepto en los casos expresamente permitidos por los términos de este Acuerdo. Cualquier dato técnico provisto que no esté cubierto por las disposiciones anteriores se consideran "elementos comerciales de datos técnicos " de conformidad con DFAR Sección 227.7015
información confidencial y secretos comerciales de Encore Electrode licencias de terceros
5. Limitaciones de Garantía. EL SOFTWARE ESTA A SU DISPESTÁ". NINGUNA GARANTÍA, EXPRESA O IMPLÍCITA, COSOFTWARE, INCLUYENDO, AUNQUE SIN LIMITACION, A LAS GCOMERCIALIZACIÓN Y APTITUD PARA UN PROPÓSITO PARTICULAR DE NO VIOLACIÓN DE LA PROPIEDAD INTELECTUAL, Y ENCRENUNCIA EXPRESAMENTE TODAS LAS GARANTÍAS NODOCUMENTO. USTED ASUME EL RIESGO EN CUANTO A LA CALIDAD DEL SOFTWARE. SI EL SOFTWARE TIENE UN ERROR, ELECTRONICS, INC. O EL DISTRIBUIDOR AUTORIZADO, ASUMIRÁ ELSERVICIO, REPARACIÓN O CORRECCIÓN. ALGUNOS ESEXCLUSIÓN DE GARANTÍAS IMPLÍCITAS, POR LO QUEMENCIONADA PODRÍA NO SER APLICABLE PARA USTED. ESDERECHOS LEGALES, Y USTED TAMBIÉN PUEDE TENER OPUEDEN VARIAR DE UN ESTADO A OTRO. SU ÚNICARESPONSABILIDAD DE ENCORE ELECTRONICS, INC. QUEDAANTERIORMENTE CITADO.
6. No Responsabilidad por Daños y Perjuicios Consecuentes. NINGÚN CASO, ENCORE ELECTRONICS, INC. O SUS AGENTES SERÁN RESPPOR LA PÉRDIDA DE GANANCIAS ANTICIPADAS, PÉRDIDA DE INTERRUPCIÓN DEL NEGOCIO, COSTO DE COBERTURINDIRECTO, INCIDENTAL, ESPECIAL, DISCIPLINARIDERIVADOS DEL USO O LA IMPOSIBILIDAD DE USO DEL SOCAUSA Y EN CUALQUIER TEORÍA DE LA RESPONSAINCUMPLIMIENTO DE CONTRATO, AGRAVIO (INCLUYENDCUALQUIER OTRA FORMA), INCLUSO SI ENCORE ELECNOTIFICADO DE LA POSIBILIDAD DE TALES DAÑOS. EN ELECTRONICS, INC. SERÁ RESPONSABLE ANTE USTED POR DAÑOS EN UNACANTIDAD MAYOR QUE LAS TASAS PAGADAS POR EL U
44www.encore-usa.com
ón, muestra o revelación de 27.7015 (b).
DE LA INSTALACIÓN DEL NCUMPLIMIENTO DE LOS CIÓN, DESTRUCCIÓN O U PODER . Los derechos de la terminación del presente
fallos y no está diseñado ni imiento a prueba de fallos, o cir directamente a la muerte, ctivamente, "Actividades de
UNCIA A TODA GARANTÍA TO RIESGO.
11. Ley Aplicable y Jurisdicción. Este Contrato se regirá e interpretará según las leyes del Unidos tal como se aplica a los contratos establecidos y
conflictos de disposiciones ión de la Convención de las
cionales de Bienes. Las demandas o del plazo, y cada parte se
unales estatales y federales
él, puede
a, almacenada en un sistema de recuperación o
epto la documentación que
preso y por escrito.
ESTE MANUAL SE PROPORCIONA "TAL CUAL" SIN GARANTÍA DE NINGÚN TIPO, YA SEA EXPRESA O IMPLÍCITA, POR EJEMPLO, LAS GARANTÍAS O CONDICIONES IMPLÍCITAS DE COMERCIABILIDAD O IDONEIDAD PARA UN PROPÓSITO EN PARTICULAR. EN NINGÚN CASO, SUS DIRECTORES, FUNCIONARIOS, EMPLEADOS O AGENTES SERÁN RESPONSABLES DE ALGÚN DAÑO INDIRECTO, ESPECIAL, INCIDENTAL O CONSECUENTE (INCLUYENDO LOS DAÑOS POR LUCRO CESANTE, PÉRDIDA DE NEGOCIO, PÉRDIDA FUNCIONAL O DE DATOS, INTERRUPCIÓN DE NEGOCIO), INCLUSO SI HEMOS SIDO ADVERTIDOS DE LA POSIBILIDAD DE QUE TALES DAÑOS SE DERIVAN DE ALGÚN DEFECTO O ERROR EN ESTE MANUAL O PRODUCTO.
La garantía del producto o servicio no se ampliará si: (1) el producto ha sido reparado,
modificado o alterado, salvo que dicha reparación, modificación o alteración sea
autorizada por nosotros por escrito, o (2) el número de serie del producto ha sido borrado
o falta.
(a). Cualquier uso, modificación, reproducción, publicación, ejecucitales datos técnicos se regirán por los términos de DFAR Sección 2
9. Terminación. ESTE CONTRATO SERÁ EFECTIVO DESSOFTWARE Y FINALIZARÁ INMEDIATAMENTE POR: (i) EL ITÉRMINOS DE ESTE ACUERDO, O POR (ii) DEVOLUELIMINACIÓN DE TODAS LAS COPIAS DEL SOFTWARE EN SEncore Electronics, Inc. y sus obligaciones seguirán vigentes trasContrato.
10. Actividades de Alto Riesgo. El Software no es tolerante a pensado para su uso en entornos peligrosos que requieran un rendcualquier otra aplicación en la que la falla del software pueda condulesiones personales, o graves daños físicos o a la propiedad (coleAlto Riesgo"). Encore Electronics, Inc. EXPRESAMENTE RENEXPRESA O IMPLÍCITA DE APTITUD PARA ACTIVIDADES DE AL
Estado de California y los Estados llevados totalmente a cabo en California, sin tener en cuenta loslegales del mismo y las partes expresamente excluyen la aplicacNaciones Unidas sobre los Contratos de Compraventa Interna
medidas de aplicación deben ser interpuestas dentrocompromete irrevocablemente a la jurisdicción exclusiva de los tribubicados en el Condado de Santa Clara.
Apéndice G. Aviso para el Usuario Ninguna parte de este manual, incluyendo los productos y software descritos en
ser reproducida, transmitida, transcrit
traducida a otro idioma de alguna forma o por algún medio, exc
mantiene el comprador como respaldo, sin nuestro permiso, ex
45www.encore-usa.com
manual pueden ser o no s o derechos de autor de sus respectivas empresas, y se utilizan sólo
ropietarios, sin intención de
s® 7, Windows Vista® and Windows® XP son marcas comerciales registradas
de Adobe Systems
LA INFORMACIÓN CONTENIDA EN ESTE MANUAL SE PROVEEN PARA EFECTOS MERAMENTE INFORMATIVOS, Y ESTÁN SUJETOS A CAMBIOS EN CUALQUIER MOMENTO SIN PREVIO AVISO Y NO DEBE INTERPRETARSE COMO UN COMPROMISO POR PARTE DE NOSOTROS. NO ASUMIMOS NINGUNA RESPONSABILIDAD POR CUALQUIER ERROR O IMPRECISIÓN QUE PUEDA APARECER EN ESTE MANUAL, INCLUYENDO LOS PRODUCTOS Y SOFTWARE DESCRITOS EN ÉL.
Los productos y nombres corporativos que aparecen en estemarcas registradapara identificación o explicación y para el beneficio de los pcometer infracción alguna.
Windowde Microsoft® Corporation.
Adobe® and Acrobat® son marcas comerciales registradas Incorporated.
LAS ESPECIFICACIONES Y
46www.encore-usa.com
especificaciones, tamaño y forma del producto están sujetos a cambios sin previo aviso, y la apariencia real del producto puede diferir de la
presentada aquí. Las marcas y nombres comerciales son propiedad de sus respectivos dueños.
* Los números locales de soporte técnico se proporcionan en los países seleccionados. El servicio puede cambiar sin previo aviso.
Visite nuestro sitio web para mayor información.
Las