Implantate
PODUKTÜBESICHT
Ausgewählte Platten, Schrauben und Instrumente zur Osteosynthese
Variabel winkelstabileprox. Humerusplatte mit 8 Kopflöchern
WinkelstabileClaviculaschaftplatte
Winkelstabile dist. Ulnaplatte
Königsee-Femur-Nagelkomplett
Variabel winkelstabiledist. Tibiaplatte
Variabel winkelstabileMulti-AD-
Platte D 3,5
Winkelstabile lateraleClaviculaschaftplatte
5.3502.34
5.2783.37K
5.773.46
Winkelstabile dist. Dorsale RadiusplatteD 2,0
Variabel winkelstabileOlekranonplattemit Krallen
WinkelstabileMini T-PlatteD 2,0; 2/4 Löcher
WinkelstabileDoppelstegplatteD 2,0 schräg
WinkelstabileT-Tibiaplatte
Variabel winkelstabilePatellaplatte
WinkelstabileFersenbeinplatte
8 Löcher
Variabel winkelstabileLCF- Platte
Variabel winkelstabileprox. Humerusplatte
mit 5 Kopflöchern
Winkelstabile prox.Radius-Köpfchen-
platte D 2,0
Variabel winkelstabiledist. Humerusplatte
lateral
Variabel winkelstabiledist. Humerusplatte
medial
RoSA
WinkelstabileL-Tibiakopfplatte
Variabel winkelstabiledist. Fibulaplatte
7 Löcher
Variabel winkelstabileInterpositions-
platte D 3,5
Variabel winkelstabileL-AD Platte
D 3,5;2/2 Löcher schräg
Variabel winkelstabileT-AD Platte
D 3,5;2/2 Löcher
5.9012.05
5.9052.04S
5.9312.24
5.778.410
5.732.07
5.2803.24
5.2793.41
5.3512.34
5.799.05
5.884.23
5.9853.73
7.1KF10/210
5.07803.07
5.2823.43
5.2813.28
5.2873.33
5.2833.33
5.3522.08
5.790.85
5.888.43
5.892.53
5.9482.08
5.2803.24
5.2883.74
5.881.01
5.3512.34
T
5.8513.11
5.8563.48
5.8522.56
5.08743.10
5.9012.05
5.9052.04S
5.9312.24
5.778.410
5.732.07
5.809.07
Winkelstabilegerade Miniplatte D 2,0
Winkelstabiledist. Femurplatte
WinkelstabileDrittelrohrplatte
Variabel winkelstabileDoppelstegplatteD 2,7
Variabel winkelstabileMTP-Arthrodesen-platte L 41
5.799.05
5.884.23
5.9853.73
Winkelstabiledist. Radius-platte D 2,7
7.1KF10/210
5.773.46
5.07803.07
5.2823.43
5.881.01
5.2813.28
5.2873.33
5.2833.33
5.2833.43K
Variabel winkelstabileT-AD Platte
1 DC-L D 3,5
7.308.136P3®
c
3Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Inhaltsverzeichnis
Inhalt
Standardinstrumentarium
Obere Extremitäten
Spezielle Implantate und Instrumente
Minifragment
Kleinfragment
Großfragment
Winkelstabile Claviculaplatten / OP-Sets Winkelstabile/variable winkelstabile Claviculaplatten
Variabel winkelstabile Claviculaplatten
Winkelstabile/variabel winkelstabile proximale Humerusplatten 3.5 / 4.0
Winkelstabile proximale Humerusplatten 4.5 / 6,0
Winkelstabile/variabel winkelstabile distale Humerusplatten
Variabel winkelstabile Olecranonplatten
Winkelstabile distale Radiusplatten 2.0 / 3.5
Winkelstabile/variabel winkelstabile distale Radiusplatten 2.7
Winkelstabile/variabel winkelstabile distale Radiusplatten 3.5
Winkelstabile Ulnaplatte
Variabel winkelstabile Handwurzel-Ringplatten
Variabel winkelstabile Handarthrodesenplatte
Winkelstabile Platten, Hand, Minifragment 2.0
RoSA®
Königsee Femurnagel ∙ KFNWinkelstabile distale Femurplatte
Variabel winkelstabile Patellaplatte
Winkelstabile HTO - Platte
Winkelstabile proximale Tibiaplatte
Variabel winkelstabile distale Tibiaplatte
Variabel winkelstabile distale Fibulaplatte
Winkelstabile/variabel winkelstabile Calcaneusplatten
Variabel winkelstabile Rückfußplatten 3.5
Variabel winkelstabile Vorfußplatten 2.7
Variabel winkelstabile Vorfußplatten 2.7
Variabel winkelstabile Vorfuß ∙ Stufenplatten
Winkelstabile/variabel winkelstabile gerade Platten ∙ KleinfragmentWinkelstabile gerade Platten ∙ GroßfragmentFrakturkompressionsschraube und Drill-Fix-Vorfußschraube
Instrumentarium für die Vorfußchirurgie
LASA-DR Ankerschraube
X-tenz™
DET-Schraube
Rep-Ret System
Winkelstabile CPL-Platte mit Kerben
IMPLANTEX® NotfallsetDHS Dynamische Hüft - und Kondylenschraube
Kompressionsdraht (Zach-Draht)
Durchbohrte Schrauben
Untere Extremitäten
5
5
5
7
8
9
10
10
10
11
12
13
14
14
14
15
17
17
18
18
19
19
20
20
21
22
23
24
25
27
27
28
28
28
28
29
29
29
30
30
30
31
4 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
5Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Sta
ndard
instrumente
Standard Minifragment-Instrumentarium im Set∙ Kortikalisschrauben Ø 1.5 / 2.0 / 2.7 mm∙ Platten für Schrauben Ø 1.5 / 2.0 / 2.7 mm∙ Instrumente für Ø 1.5 /2.0 / 2.7 mm∙ Art.-Nr. Titan: 19.141.00∙ Art.-Nr. Stahl: 19.140.00
Standard Kleinfragment-Instrumentarium im Set∙ Kortikalisschrauben Ø 3.5 mm∙ Spongiosaschrauben Ø 4.0 mm∙ Platten für Schrauben Ø 3.5 / 4.0 mm∙ Instrumente für Ø 3.5 / 4.0 mm∙ Art.-Nr. Titan: 19.467.00∙ Art.-Nr. Stahl: 19.466.00
Standard Großfragment-Instrumentarium im Set∙ Kortikalisschrauben Ø 4.5 mm∙ Spongiosaschrauben Ø 6.5 mm∙ Platten für Schrauben Ø 4.5 / 6.5 mm∙ Instrumente für Ø 4.5 / 6.5 mm
∙ Art.-Nr. Instrumente: 19.160.00
∙ Art.-Nr. Platten Stahl: 19.161.00∙ Art.-Nr. Platten Titan: 19.162.00
∙ Art.-Nr. Schrauben Stahl: 19.163.00∙ Art.-Nr. Schrauben Titan: 19.164.00
Kleinfragment
Großfragment
Minifragment
6 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Ober
e Ex
trem
itäte
n
7Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Obere Extrem
itäten
Winkelstabile laterale Claviculaplatte∙ für Schrauben Ø 3.5/4.0 mm∙ Längen: 65 und 82 mm, Titan ∙ Art.-Nr. links: 5.3512.xx∙ Art.-Nr. rechts: 5.3502.xx
Winkelstabile Claviculaschaftplatte∙ für Schrauben Ø 3.5 mm∙ Längen: 99 und 124 mm, Titan∙ Art.-Nr. links: 5.3532.xx∙ Art.-Nr. rechts: 5.3522.xx
Winkelstabile AC-Gelenkshakenplatte∙ für Schrauben Ø 3.5/4.0 mm∙ Länge: 78 mm, Titan∙ Hakentiefe: 14/18 mm∙ Hakenlänge: 18 mm∙ Art.-Nr. links: 5.3552.xx18∙ Art.-Nr. rechts: 5.3542.xx18
Winkelstabile Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend∙ Längen: 10 - 24 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Standard Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 10 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Winkelstabile Claviculaplatten
OP-Sets Claviculaplatten
∙ OP-Set Winkelstabile Claviculaplatten und Claviculahakenplatten, Kleinfragment Art.-Nummer Titan: 19.478.00
∙ OP-Set Variabel winkelstabile Claviculaplatten und Claviculahakenplatten, Kleinfragment Art.-Nummer Titan: 19.479.00
8 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Ober
e Ex
trem
itäte
n
Variabel winkelstabile Claviculaschaftplatte ∙ für Schrauben Ø 3.5 mm∙ Länge: 74 mm, Titan ∙ Art.-Nr. links: 5.3533.06∙ Art.-Nr. rechts: 5.3523.06
Variabel winkelstabile Claviculaschaftplatte ∙ für Schrauben Ø 3.5 mm∙ Länge: 107 mm, Titan ∙ Art.-Nr. links: 5.3533.09/70∙ Art.-Nr. rechts: 5.3523.09/70
Variabel winkelstabile Claviculaschaftplatte∙ für Schrauben Ø 3.5 mm∙ Länge: 111 mm, Titan∙ Art.-Nr. links: 5.3533.09/105∙ Art.-Nr. rechts: 5.3523.09/105
Variabel winkelstabile laterale Claviculaplatte ∙ für Schrauben Ø 3.5 mm∙ Längen: 65 und 82 mm, Titan ∙ Art.-Nr. links: 5.3513.xx∙ Art.-Nr. rechts: 5.3503.xx
Variabel winkelstabile Claviculaplatten 2.7
Variabel winkelstabile laterale Claviculaplatte∙ für Schrauben Ø 2.7 mm∙ Längen: 65 und 82 mm, Titan∙ Art.-Nr. links: 5.3613.xx∙ Art.-Nr. rechts: 5.3603.xx
Variabel winkelstabile AC-Gelenkshakenplatte∙ für Schrauben Ø 3.5/4.0 mm∙ Längen: 66, 74 und 97 mm, Titan∙ Hakentiefe: 14 mm∙ Hakenlänge: 16 mm∙ Art.-Nr. links: 5.3573.xx/1416∙ Art.-Nr. rechts: 5.3563.xx/1416
Variabel winkelstabile Claviculaschaftplatte∙ für Schrauben Ø 3.5 mm∙ Längen: 99 und 124 mm, Titan∙ Art.-Nr. links: 5.3533.xx∙ Art.-Nr. rechts: 5.3523.xx
Unsere variabel winkelstabilen Platten können mit winkelstabilen Schrauben bei einer Winkelfreiheit von bis zu 15° ixiert werden. Dadurch vergrößert sich die Flexibilität bei der Besetzung der Plattenlöcher.
Variabel winkelstabile Claviculaplatten 3.5
9Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Obere Extrem
itäten
Winkelstabile proximale Humerusplatte∙ mit 5 Koplöchern ∙ für Schrauben Ø 3.5/4.0 mm∙ Längen: 74 - 218 mm, Titan∙ Art.-Nr. 5.799.xx
Variabel winkelstabile proximale Humerusplatte∙ mit 5 Koplöchern∙ für Schrauben Ø 3.5/4.0 mm∙ Längen: 74 - 218 mm, Titan∙ Art.-Nr. 5.797.xx
Variabel winkelstabile proximale Humerusplatte ∙ mit 8 Koplöchern∙ Titan, TiOB®- optimierte Oberläche∙ für Schrauben Ø 3.5/4.0 mm∙ Längen: 61 ∙ 253 mm∙ Art.-Nr. 5.790.xx
Winkelstabile Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend∙ Längen: 22 - 42 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Setvariante 1:∙ Winkelstabile Kortikalisschraube∙ Ø 4.0 mm, selbstschneidend∙ Längen: 34 --56 mm im Set∙ Titanlegierung-Art.-Nr. 3.148.xx
Setvariante 2:∙ Winkelstabile Spongiosaschraube∙ Ø 4.0 mm, selbstschneidend∙ Längen: 34 - 56 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.147.xx
Standard Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend∙ Längen: 22 - 42 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Proximale Humerusplatten 3.5 / 4.0
Zielblock PEEK für proximale Humerusplatten ∙ mit 8 Koplöchern, Kleinfragment∙ Art.-Nr. 10.179.10
Zielblock Stahl für proximale Humerusplatten ∙ mit 5 Koplöchern, Kleinfragment∙ Art.-Nr. 10.173.00
OP-Set Proximale Humerusplatten ∙ Kleinfragment, winkelstabil, komplett∙ Art.-Nr. Titan: 19.364.00∙ Art.-Nr. Stahl: 19.365.00
∙ weitere Sets auf Anfrage
∙ Möglichkeiten der Setbestückung für proximale Verschraubung:
10 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Ober
e Ex
trem
itäte
n
Proximale Humerusplatten 4.5 ∙ 6.0
Winkelstabile distale Humerusplatte radial/lateral∙ für Schrauben Ø 3.5 mm∙ Titan ∙ Längen: 78 - 150 mm∙ Art.-Nr. links: 5.8532.5x∙ Art.-Nr. rechts: 5.8522.5x
Variabel winkelstabile distale Humerusplatte ulnar/medial∙ für Schrauben Ø 3.5 mm∙ Titan∙ Längen: 78 - 150 mm∙ Art.-Nr. links: 5.8573.4x∙ Art.-Nr. rechts: 5.8563.4x
Variabel winkelstabile Olecranonplatte ohne Krallen∙ für Schrauben Ø 3.5 mm∙ Titan∙ Längen: 76, 99 und 151mm∙ Art.-Nr. 5.08753.xx
Variabel winkelstabile Olecranonplatte mit Krallen∙ für Schrauben Ø 3.5 mm∙ Titan∙ Längen: 76, 99 und 151mm∙ Art.-Nr. 5.08743.xx
Olecranonplatten
Distale Humerusplatten
Winkelstabile proximale Humerusplatte∙ für Schrauben Ø 4.5/6.0 mm∙ Längen: 73 ∙ 217 mm∙ Art.-Nr. Stahl: 4.795.xx∙ Art.-Nr. Titan: 5.795.xx
Winkelstabile Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen:18 - 50 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.545.xx
Winkelstabile Spongiosaschraube∙ Ø 6.0 mm, selbstschneidend∙ Längen: 34 - 56 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.163.xx
Standard Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen:18 - 50 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.152.xx
OP-Set proximale Humerusplatten∙ Großfragment, komplett∙ Art.-Nr. Stahl: 19.103.00∙ Art.-Nr. Titan: 19.104.00
11Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Obere Extrem
itäten
Ellenbogen ∙ Set
Winkelstabile palmare Radiusplatte∙ Mit 3 Schaftlöchern (Länge: 50 mm) ∙ Mit 5 Schaftlöchern (Länge: 67 mm)∙ für Schrauben Ø 2.0/3.5 mm∙ Titan ∙ Art.-Nr. links: 5.899.63 (3L); 5.898.65 (5L)∙ Art.Nr. rechts: 5.899.63 (3L); 5.898.65 (5L)
Winkelstabile dorsale Radiusplatte∙ Breit (5 Löcher im distalen Plattenbereich)∙ für Schrauben Ø 2.0/3.5 mm∙ Titan ∙ Art.-Nr. links: 5.893.53∙ Art.Nr. rechts: 5.892.53
Winkelstabile dorsale Radiusplatte∙ Schmal (4 Löcher im distalen Plattenbereich)∙ für Schrauben Ø 2.0/3.5 mm∙ Titan∙ Art.-Nr. links: 5.893.43 ∙ Art.Nr. rechts: 5.892.43
Winkelstabile Kortikalisschraube∙ Ø 2.0 mm, selbstschneidend ∙ Längen: 16 - 30 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.114.xx
Standard Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Längen: 14 - 24 mm im Set∙ Titanlegierung-∙ Art.-Nr. 3.132.xx
Distale Radiusplatten 2.0 / 3.5
Distale Humerusplatten und Olecranonplatten sind Bestandteil des Ellenbogen ∙ Sets.
Art.-Nr. 19.551.00
OP-Set dorsale und palmare RadiusplattenArt.-Nr. 19.436.00
12 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Ober
e Ex
trem
itäte
n
Variabel winkelstabile palmare Radiusplatte, breit∙ 7 Löcher im distalen Plattenbereich∙ für Schrauben Ø 2.7 mm∙ Titan∙ Längen: 43 - 136 mm∙ Art.-Nr. rechts: 5.9843.xx∙ Art.-Nr. links: 5.9853.xx
Variabel winkelstabile palmare Radiusplatte, schmal∙ 5 Löcher im distalen Plattenbereich∙ für Schrauben Ø 2.7 mm∙ Titan∙ Längen: 43 - 136 mm∙ Art.-Nr. rechts: 5.9823.xx∙ Art.-Nr. links: 5.9833.xx
Winkelstabile palmare Radiusplatte, breit∙ 7 Löcher im distalen Plattenbereich∙ für Schrauben Ø 2.7 mm∙ Titan∙ Längen: 51 und 60 mm∙ Art.-Nr. rechts: 5.9842.xx∙ Art.-Nr. links: 5.9852.xx
Distale Radiusplatten 2.7
Winkelstabile palmare Radiusplatte, schmal∙ 5 Löcher im distalen Plattenbereich∙ für Schrauben Ø 2.7 mm∙ Titan∙ Längen: 51und 60 mm∙ Art.-Nr. rechts: 5.9822.xx∙ Art.-Nr. links: 5.9832.xx
Winkelstabile Kortikalisschraube ∙ Ø 2.7 mm, selbstschneidend∙ Längen: 12 - 28 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.125.xx
Standard Kortikalisschraube ∙ Ø 2.7 mm, selbstschneidend∙ Längen: 12 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.120.xx
Winkelstabile und konventionelle T10 Kortikalisschrauben Ø 2.7 mm, selbstschneidend ∙ Art.-Nr. 3.1251.xx
Zielblock PEEK für Radiusplatten 2.7 mit 5 und 7 Koplöchern
Auf Anfrage erhältlich:
Auf Anfrage erhältlich:
OP-Set variabel winkelstabile distale Radiusplatten∙ für Schrauben Ø 2.7 mm, komplett∙ Art.-Nr. 19.1163.00
∙ weitere Sets auf Anfrage erhältlich
5 Koplöcher
Art.-Nr. rechts: 10.180.05Art.-Nr. links: 10.181.05
7 Koplöcher
Art.-Nr. rechts: 10.180.07Art.-Nr. links: 10.181.07
13Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Obere Extrem
itäten
Standard Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 10 - 24 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Längen: 16 - 30 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Radiusplatte „vario“winkelstabil Art.-Nr. links: 5.887.3xArt.-Nr. rechts: 5.886.3xTiOB®- optimierte Oberläche
Distale Radiusplatten 3.5
Radiusplatte „quadro“winkelstabil Art.-Nr. links: 5.877.4xArt.-Nr. rechts: 5.876.4x
Radiusplatte „minor“winkelstabil Art.-Nr. links: 5.883.3xArt.-Nr. rechts: 5.882.3x
Radiusplatte „classic“ winkelstabilArt.-Nr. links: 5.877.3xArt.-Nr. rechts: 5.876.3x
Radiusplatte „Classic“ variabel winkelstabilArt.-Nr. links: 5.8763.3xArt.-Nr. rechts: 5.8773.3x
Radiusplatte „minor“ variabel winkelstabil Art.-Nr. links: 5.8833.3xArt.-Nr. rechts: 5.8823.3x
OP-Set winkelstabile distale Radiusplatten∙ Kleinfragment, komplett∙ Art.-Nr. 19.112.00
∙ weitere Sets auf Anfrage
14 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Ober
e Ex
trem
itäte
n
Ulnaplatte
Winkelstabile distale Ulnaplatte∙ für Schrauben Ø 2.0 mm, Titan∙ Längen: 38 bis 60 mm∙ Art.-Nr. links: 5.889.4x∙ Art.-Nr. rechts: 5.888.4x
Winkelstabile Kortikalisschraube∙ Ø 2.0 mm, selbstschneidend, Titanlegierung∙ Längen: 10 -16 mm im Set ∙ Art.-Nr. 3.114.xx
Standard Kortikalisschraube ∙ Ø 2.0 mm, selbstschneidend, Titanlegierung∙ Längen: 10 -14 mm im Set∙ Art.-Nr. 3.110.xx
Handwurzel Ringplatten
Variabel winkelstabile Ringplatte∙ für Schrauben Ø 2.0 mm ∙ für STT-Athrodesen geeignet∙ Art.-Nr. 5.9953.14
Variabel winkelstabile Ringplatte∙ für Schrauben Ø 2.7 mm∙ für mediokarpale und Teilarthrodesen geeignet∙ Art.-Nr. 5.9953.16
Winkelstabile Kortikalisschraube∙ Ø 2.0 mm, selbstschneidend∙ Längen: 8 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.114.xx
Standard Kortikalisschraube∙ Ø 2.0 mm, selbstschneidend∙ Längen: 8 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.110.xx
Winkelstabile Kortikalisschraube∙ Ø 2.7 mm, selbstschneidend∙ Längen: 8 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.125.xx
Handarthrodesenplatte
Variabel winkelstabile Handarthrodesenplatte∙ 4 verschiedene Designs: Offset 0 und 2; 4 und 5 Grad∙ für Schrauben 2.7 und 3.5 mm (Kopfdurchmesser: 5.0 mm)∙ Längen: 96, 97 und 133 mm∙ Art.-Nr. 5.9963.xx
OP-Set Distale UlnaplattenkomplettArt.-Nr. 19.506.00
OP-Set variabel winkelstabile Ringplatten∙ komplett, Titan∙ Art.-Nr. 19.439.00
OP-Set variabel winkelstabile Handarthrodesenplatten∙ komplett, Titan∙ Art.-Nr. 19.671.020
15Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Obere Extrem
itäten
Hand - Minifragment 2.0
Winkelstabile T-Platte ∙ mit 3 Löchern in T-Form, gerade, Titan∙ Länge: 30 mm∙ Art.-Nr. 5.9332.xx
Winkelstabile T-Platte ∙ mit 3 Löchern in Y-Form, Titan∙ Länge: 33 mm∙ Art.-Nr. 5.9322.xx
Winkelstabile T-Platte ∙ mit 2 Löchern in T-Form, Titan∙ Länge: 30 mm∙ Art.-Nr. 5.9312.xx
Winkelstabile gerade Platte∙ 5 Löcher, gerade, Titan∙ Längen: 29 - 77 mm∙ Art.-Nr. 5.9012.xx
Winkelstabile Doppelstegplatte∙ 4 Löcher, Titan∙ Länge: 15 mm ∙ Art.-Nr. 5.9052.04S
Winkelstabile Doppelstegplatte∙ 10 Löcher, gerade, Titan∙ Länge: 45 mm∙ Art.-Nr. 5.9052.10
Winkelstabile Mini-Stegplatte∙ 4 Löcher, gerade; Titan∙ Länge: 29 mm∙ Art.-Nr. 5.9022.04
Winkelstabile Korrektur-Platte∙ 6 Löcher, gerade, Titan∙ Länge: 37 mm∙ Art.-Nr. 5.9032.06
Winkelstabile Mini-T-Platte∙ 3 Löcher, Titan∙ Länge: 33 mm∙ Art.-Nr. 5.9342.34
Winkelstabile Doppelstegplatte∙ 7 Löcher, Y-Form, Titan∙ Länge: 25 mm∙ Art.-Nr. 5.9052.07S
Winkelstabile Kortikalisschraube∙ Ø 2.0 mm, selbstschneidend∙ Längen: 8 - 20 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.114.xx
OP-Set winkelstabile Miniplatten∙ für Schrauben Ø 2.0 mm∙ Titan∙ komplett∙ Art.-Nr. 19.508.00
16 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Unt
ere
Extrem
itäte
n
17Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Untere Extrem
itäten
Rotationsstabiler Schraub-Anker ∙ RoSA®
RoSA® Schraube∙ Ø 10 mm, Titan∙ Längen: 50 mm, 70 mm und 90 mm∙ Art.-Nr. 7.306.xx
RoSA® Klinge∙ Titan ∙ Längen: 60mm, 80 mm und 100 mm∙ Art.-Nr. 7.307.xx
RoSA® Gleithülsenplatte∙ Titan∙ Winkel: 122°,129°,136°, 143°∙ Längen: 28mm, 60 mm und 92 mm∙ Art.-Nr. 7.308.xx
RoSA® Verbindungsschraube∙ Titan∙ Art.-Nr. 7.309.01 (kanüliert)∙ Art.-Nr. 7.309.02 (nicht kanüliert)
Gleitnägel im OP-Set∙ Längen: 300 mm / 450 mm∙ Art.-Nr. Titan: 19.290.00/19.290.10∙ Art.-Nr. Stahl: 19.292.00/19.292.10
∙ Set für Instrumente: Art.-Nr. 19.608.00 (2 Ebenen)
Königsee Femurnagel ∙ KFN
∙ Set zur Implantatentfernung: Art.-Nr. 19.610.00
Weitere Nägel
∙ OP-Set Königsee Femurnagel (KFN)∙ Titan∙ Art.-Nr. 19.344.00
Teleskopnagel f.Kinder m.Osteogenesis imperfectaArt.-Nr. Gr. 1: 7.288.xx Gr. 2: 7.289.xx Gr. 3: 7.290.xx Gr. 4: 7.291.xx Gr. 5: 7.292.xx
∙ Set für Implantate: Art.-Nr. 19.606.00
18 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Unt
ere
Extrem
itäte
n
Distale Femurplatte
Winkelstabile distale Femurplatte∙ für Schrauben Ø 4.5/5.5 mm∙ Längen: 118 - 309 mm∙ Titan und Implantatestahl
∙ Art.-Nr. rechts: ∙ 06 (Plattendicke 4.7 mm) 5.9482.08 - 16 (Plattendicke 6.0 mm)∙ Art.-Nr. links: 5.9472.04 ∙ 06 (Plattendicke 4.7 mm) 5.9492.08 - 16 (Plattendicke 6.0 mm)
Winkelstabile Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen: 14 - 54 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.545.xx
Winkelstabile Kortikalisschraube∙ Ø 5.5 mm, selbstschneidend∙ Längen: 40 - 90 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.549.xx
Standard Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen: 14 - 54 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.152.xx
Variabel winkelstabile Patellaplatte∙ für Schrauben Ø 3.5 mm∙ Kopfdurchmesser 5.0 mm∙ vorgebogen, 11 Loch∙ Titan∙ Art.-Nr. 5.8513.11
Patellaplatte
OP-Set für Implantation derwinkelstabilen Femurplatte∙ Großfragment∙ Art.-Nr. Stahl: 19.600.00∙ Art.-Nr. Titan: 19.602.00
OP-Set Zielbügel für minimalinvasive Implantation der winkelstabilen Femurplatte∙ Großfragment∙ Art.-Nr. 19.604.00
OP-Set variabel winkelstabile Patellaplatte∙ komplett∙ Art.-Nr. 19.671.010
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, Kopf Ø 5.0 ∙ selbstschneidend∙ Längen: 10 - 40 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.136.xx
19Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Untere Extrem
itäten
Königsee HTO ∙ Platte
Winkelstabile HTO-Platte, medial∙ für Schrauben Ø 4.5/6.0 mm, Titan∙ Längen: 63 und 93 mm∙ Art.-Nr. rechts: 5.7242.3x∙ Art.-Nr. links: 5.7252.3x
Winkelstabile Spongiosaschraube∙ Ø 6.0 mm, selbstschneidend ∙ Längen: 40 - 80 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.163.xx
Winkelstabile Kortikalisschraube ∙ Ø 4.5 mm, selbstschneidend ∙ Längen: 30 - 60 mm im Set∙ Titanlegierung ∙ Art.-Nr. 3.545.xx
Sicherungsschraube für Abstandshalter ∙ M 4 x 9 mm∙ Art.-Nr. 3.721.09
Abstandshalter für HTO-Platte ∙ vorhandene Größen: 50 - 200 mm∙ Art.-Nr. 5.7221.xx
Winkelstabile proximal laterale T-Tibiaplatte∙ für Schrauben Ø 4.5 - 6,0 mm∙ Längen: 79 - 287 mm, Titan ∙ Art.-Nr links: 5.777.xx∙ Art.-Nr rechts: 5.778.xx
Winkelstabile proximal laterale L-Tibiaplatte∙ für Schrauben Ø 4.5 - 6,0 mm∙ Längen: 79 - 287 mm,Titan∙ Art.-Nr links: 5.773.xx∙ Art.-Nr rechts: 5.774.xx
Winkelstabile Spongiosaschraube∙ Ø 6.0 mm, selbstschneidend∙ Längen: 55 - 90 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.163.xx
Winkelstabile Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen: 18 - 55 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.545.xx
Standard Kortikalisschraube ∙ Ø 4.5 mm, selbstschneidend∙ Längen: 18 - 50 mm im Set ∙ Titanlegierung∙ Art.-Nr. 3.152.xx
Proximale Tibiaplatten
OP-Set für winkelstabile Königsee HTO-Platte∙ Großfragment, komplett∙ Art.-Nr. 19.357.00
OP-Set winkelstabile proximale lateraleL-Tibiakopfplatte; Großfragment ∙ Art.-Nr. Stahl: 19.402.00∙ Art.-Nr. Titan: 19.406.00
OP-Set winkelstabile proximale lateraleT-Tibiakopfplatte; Großfragment ∙ Art.-Nr. Stahl: 19.404.00∙ Art.-Nr. Titan: 19.408.00
20 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Unt
ere
Extrem
itäte
n
Variabel winkelstabile distale Fibulaplatte ∙ für Schrauben Ø 3.5 mm, anatomisch geformt∙ Titan∙ Längen: 96, 122 und 148 mm∙ Art.-Nr. 5.07803.xx
Standard Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend∙ Längen: 8 - 32 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Längen: 8 - 32 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Distale Tibiaplatte
Winkelstabile distale Tibiaplatte ∙ mit variabel winkelstabilen Löchern im distalen Plattenbereich ∙ für Schrauben Ø 3.5/4.0 mm ∙ Titan∙ Länge: 76 - 268 mm∙ Art.-Nr. rechts: 5.732.xx∙ Art.-Nr. links: 5.733.xx
Standard Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend∙ Längen: 8 - 32 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Winkelstabile Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 20 - 60 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Distale Fibulaplatte
OP-Set winkelstabile distale Tibiaplatte∙ Kleinfragment, komplett, Titan∙ Art.-Nr. 19.491.00
OP-Set variabel winkelstabile distale Fibulaplatten ∙ Kleinfragment∙ Titan, komplett∙ Art.-Nr. 19.474.00
21Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Untere Extrem
itäten
Calcaneusplatten
Variabel winkelstabile Calcaneusplatte, 10 Löcher∙ für Schrauben Ø 3.5/4.0 mm, Titan ∙ eine Größe: 72 mm∙ Art.-Nr. rechts: 5.894.00∙ Art.-Nr. links: 5.895.00
Variabel winkelstabile Calcaneusplatte, 9 Löcher ∙ für Schrauben Ø 3.5/4.0 mm, Titan∙ eine Größe: 65 mm ∙ Art.-Nr. rechts: 5.8783.09∙ Art.-Nr. links: 5.8793.09
Winkelstabile Spongiosaschraube∙ Ø 4.0 mm, selbstschneidend ∙ Längen: 22 - 50 mm im Set ∙ Titanlegierung∙ Art.-Nr. 3.147.xx
Durchbohrte Schraube TiOB®
∙ Ø 4.0 mm, kurzes Gewinde ∙ Selbstschneidend, selbstbohrend rückschneidend, Titan∙ Längen: 38 - 60 mm ∙ Art.-Nr. 3.440.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Längen: 22 - 50 mm im Set ∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Standard Spongiosaschraube∙ Ø 4.0 mm, Vollgewinde∙ Längen: 22 - 50 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.145.xx
Winkelstabile Calcaneusplatte∙ für Schrauben Ø 3.5/4.0 mm ∙ Größe: 73 und 55 mm, Titan∙ Art.-Nr. 5.878.01 (rechts), 5.879.01 (links) - groß∙ Art.-Nr. 5.880.01 (rechts), 5.881.01 (links) - klein
Winkelstabile Spongiosaschraube ∙ Ø 4.0 mm, selbstschneidend ∙ Längen: 16 - 45 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.147.xx
Standard Kortikalisschraube∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 14 - 45 mm im Set ∙ Titanlegierung∙ Art.-Nr. 3.132.xx
Standard Spongiosaschraube ∙ Ø 4.0 mm, Vollgewinde∙ Längen: 16 - 45 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.145.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Längen: 16 - 45 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.133.xx
Variabel winkelstabile Calcaneusplatte, 8 Löcher∙ für Schrauben Ø 3.5/4.0 mm, Titan∙ Kann optional zum Set bestellt werden∙ Art.-Nr. rechts: 5.8803.01∙ Art.-Nr. links: 5.8813.01
OP-Set variabel winkelstabile Fersenbeinplatte∙ Kleinfragment∙ Titan, komplett∙ Art.-Nr. 19.326.00
OP-Set winkelstabile Calcaneusplatten∙ Kleinfragment∙ Titan, komplett∙ Art.-Nr. 19.320.00
22 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Unt
ere
Extrem
itäte
n
Variabel winkelstabile Interpositionsplatte, 4 Löcher∙ Steg 7 mm, Länge: 23 mm∙ Titan∙ Art.-Nr. 5.2813.23
Variabel winkelstabile Interpositionsplatte, 4 Löcher∙ Steg 12 mm, Länge: 28 mm∙ Titan∙ Art.-Nr. 5.2813.28d
Variabel winkelstabile Interpositionsplatte, 5 Löcher∙ Länge: 28 und 33 mm∙ Titan∙ Art.-Nr. 5.2813.xx
Variabel winkelstabile Multi-Arthrodesenplatte, 6 -12 Löcher∙ Länge: 38 - 83 mm∙ Titan∙ Art.-Nr. 5.2833.xx
Variabel winkelstabile Multi-Arthrodesenplatte, 6 Löcher∙ Länge: 43 mm∙ Titan∙ Art.-Nr. 5.2823.43
Variabel winkelstabile T-Arthrodesenplatte, 2/2 Löcher∙ Länge: 33 und 38 mm∙ Titan∙ Art.-Nr. 5.2833.xx
Variabel winkelstabile T-Arthrodesenplatte, 2/2 Löcher∙ Länge: 33 - 43 mm∙ Titan∙ Art.-Nr. 5.2833.xxK
Standard Kortikalisschraube ∙ Ø 3.5 mm, lacher Kopf, selbstschneidend∙ Kopfdurchmesser 5.0 mm∙ Längen: 10 - 40 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.138.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend∙ Kopfdurchmesser 5.0 mm∙ Längen: 10 - 40 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.136.xx
Rückfußplatten 3.5
Das Rückfußsystem erlaubt die Verwendung von Schrauben Ø 2.7 mm, wenn die Schrauben den gleichen Kopfdurchmesser von 5 mm haben.
OP-Set variabel winkelstabile Rückfußplatten∙ Kleinfragment, Titan, komplett∙ Plattenstärke 2.0 mm∙ Art.-Nr. 19.524.00
Variabel winkelstabile L-AD-Platte, 2/2 Löcher∙ Länge: 33 und 43 mm, Titan, schräg∙ Art.-Nr rechts: 5.2863.xx∙ Art.-Nr links: 5.2873.xx
Variabel winkelstabile LCF-Platte nach Köck∙ Länge: 33 - 43 mm, Titan, 8 Löcher∙ Art.-Nr rechts: 5.2883.74∙ Art.-Nr links: 5.2893.74
23Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Untere Extrem
itäten
Variabel winkelstabile Doppelstegplatte, 4 Löcher ∙ Länge:18 mm, Stegdicke: 1.5 mm, Titan∙ Art.-Nr. 5.2803.18
Variabel winkelstabile Doppelstegplatte, 4 Löcher∙ Länge: 20 mm, Stegdicke: 1.5 mm, Titan∙ Art.-Nr. 5.2803.20
Variabel winkelstabile Doppelstegplatte, 4 Löcher ∙ Länge: 20 mm, Stegdicke: 1.0 mm, Titan∙ Art.-Nr. 5.2803.20d
Variabel winkelstabile Doppelstegplatte, 4 Löcher∙ Länge: 24 mm, Stegdicke: 1.5 mm, Titan∙ Art.-Nr. 5.2803.24
Vorfußplatten 2.7
Variabel winkelstabile Doppelstegplatte, 4 Löcher ∙ Länge: 22 mm, Stegdicke: 1.5 mm, Titan∙ Art.-Nr. 5.2803.22
Variabel winkelstabile Doppelstegplatte, 8 Löcher∙ Länge: 37 mm, Stegdicke: 1.5 mm, Titan∙ Art.-Nr. 5.2803.37
Variabel winkelstabile gerade Platte, 2 Löcher∙ Länge: 18 mm, Titan∙ Art.-Nr. 5.2843.18
Variabel winkelstabile gerade Platte, 4 Löcher, 1 DC-Loch∙ Länge: 37 mm, Titan∙ Art.-Nr. 5.2843.37K
Variabel winkelstabile L-Arthrodesenplatte, 2/2 Löcher∙ Längen: 28 mm, Titan∙ Art.-Nr. rechts: 5.2763.28∙ Art.-Nr. links: 5.2773.28
Variabel winkelstabile L-Arthrodesenplatte, 2/3 Löcher∙ Längen: 37 mm, Titan∙ Art.-Nr. rechts: 5.2763.37∙ Art.-Nr. links: 5.2773.37
Variabel winkelstabile T-Arthrodesenplatte, 2/2 Löcher∙ Länge: 28 mm, Titan∙ Art.-Nr. 5.2783.28
24 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Unt
ere
Extrem
itäte
n
Vorfußplatten 2.7
Variabel winkelstabile T-Arthrodesenplatte, 1 DC-Loch ∙ Länge: 37 mm∙ Titan∙ Art.-Nr. 5.2783.37K
Variabel winkelstabile MTP-Arthrodesenplatte∙ 6 Löcher, 2 DC-Löcher∙ Länge: 41 mm∙ Titan∙ Art.-Nr. rechts: 5.2793.41R∙ Art.-Nr. links: 5.2793.41L
Variabel winkelstabile MTP-Arthrodesenplatte∙ 6 Löcher, 2 DC-Löcher, Titan∙ Länge: 46 mm∙ optional erhältlich∙ Art.-Nr. rechts: 5.2793.46R∙ Art.-Nr. links: 5.2793.46L
Variabel winkelstabile MTP-Arthrodesenplatte∙ 8 Löcher, 2 DC-Löcher, Titan∙ Länge: 51 mm∙ optional erhältlich∙ Art.-Nr. rechts: 5.2793.51R∙ Art.-Nr. links: 5.2793.51L
Variabel winkelstabile Y-Vorfußplatte ∙ für Abstandshalter (2 - 6 mm)∙ Länge: 34 mm, Titan∙ Art.-Nr. Platte: 5.2903.34∙ Art.-Nr. Abstandshalter: 5.290.xx
Winkelstabile Kortikalisschraube ∙ Ø 2.7 mm, selbstschneidend∙ Kopfdurchmesser 5.0 mm∙ Längen: 10 - 30 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.125.xx
Standard Kortikalisschraube∙ Ø 2.7 mm, selbstschneidend ∙ Kopfdurchmesser 5.0 mm∙ lacher Kopf-∙ Längen: 10 - 30 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.128.xx
Auf Anfrage erhältlich: ∙ winkelstabile und konventionelle T10 Kortikalisschrauben Ø 2.7 mm ∙ selbstschneidend ∙ Art.-Nr. 3.1251.xx bzw. 3.1281.xx
OP-Set variabel winkelstabile Vorfußplatten∙ für Schrauben Ø 2.7 mm, komplett, Titan∙ Plattenstärke 1.5 mm∙ Art.-Nr. 19.523.00
25Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Untere Extrem
itäten
Variabel winkelstabile Vorfuß-Stufenplatte∙ 5 Loch∙ Stufe 2 mm ∙ Gold∙ Titan∙ Art.-Nr. 5.2913.22/2
Variabel winkelstabile Vorfuß-Stufenplatte∙ 5 Loch∙ Stufe 3 mm ∙ Pink∙ Titan∙ Art.-Nr. 5.2913.22/3
Variabel winkelstabile Vorfuß-Stufenplatte∙ 5 Loch∙ Stufe 4 mm ∙ Hellblau∙ Titan∙ Art.-Nr. 5.2913.22/4
Variabel winkelstabile Vorfuß-Stufenplatte∙ 5 Loch∙ Stufe 5 mm∙ Dunkelviolett ∙ Titan∙ Art.-Nr. 5.2913.22/5
Variabel winkelstabile Vorfuß ∙ Stufenplatten 2.7
26 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Spez
ialim
pla
ntate
27Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Spezia
limpla
ntate
Variabel winkelstabile Rekoplatte∙ für Schrauben Ø 3.5/4.0 mm; Titan∙ Längen 58 - 95 mm ∙ Art.-Nr. 5.3133.xx
Winkelstabile Drittelrohrplatte mit Wulst, ∙ für Schrauben Ø 3.5/4.0 mm; Titan∙ Längen: 61 - 97 mm ∙ Art.-Nr. 5.809.xx
Variabel winkelstabile gerade Platte ∙ mit 2 Kombi-Kompressionslöchern, Titan∙ für Schrauben Ø 3.5/4.0 mm; Längen: 51 - 181 mm∙ Art.-Nr. 5.823.xx
Winkelstabile gerade Platte∙ tailliert; Titan∙ für Schrauben Ø 3.5/4.0 mm; ∙ Längen: 35 - 103 mm ∙ Art.-Nr. 5.896.xx
Standard Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 10 - 38 mm im Set∙ Art.-Nr. 3.132.xx
Winkelstabile Kortikalisschraube ∙ Ø 3.5 mm, selbstschneidend ∙ Längen: 10 - 26 mm im Set ∙ Art.-Nr. 3.133.xx
Winkelstabile gerade Low-Contact-Platte∙ mit 2 Kombi-Kompressionslöchern, schmal∙ für Schrauben Ø 4.5/6,0 mm∙ Längen: 106 - 214 mm im Set; Titan und Stahl∙ Art.-Nr. 4.231.xx (Stahl); 5.231.xx (Titan)
Winkelstabile gerade Low-Contact-Platte∙ mit 2 Kombi-Kompressionslöchern, breit∙ für Schrauben Ø 4.5/6,0 mm∙ Längen: 106 - 214 mm im Set; Titan und Stahl ∙ Art.-Nr. 4.241.xx (Stahl); 5.241.xx (Titan)
Winkelstabile Kortikalisschraube ∙ Ø 4.5 mm, selbstschneidend ∙ Längen: 12 - 45 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.545.xx ∙ Stahl∙ Art.-Nr. 2.545.xx
Standard Kortikalisschraube∙ Ø 4.5 mm, selbstschneidend∙ Längen: 12 - 42 mm im Set∙ Titanlegierung∙ Art.-Nr. 3.152.xx∙ Stahl∙ Art.-Nr. 2.152.xx
Gerade Platten ∙ Großfragment
Rekoplatten
Variabel winkelstabile Rekoplatte∙ für Schrauben Ø 2.7 mm; Titan∙ Längen: 58 - 95 mm, 128 mm ∙ mit entspr. Biegehebel in 3 Ebenen modellierbar∙ Art.-Nr. 5.3023.xx
∙ OP-Set winkelstabile Drittelrohrplatten und variabel winkelstabile Rekoplatten, Kleinfragment∙ Art.-Nr. 19.473.00
∙ OP-Set winkelstabile gerade Platten, Großfragment∙ Art.-Nr. 19.514.00 (Titan); 19.512.00 (Stahl)
Gerade Platten ∙ Kleinfragment
29Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Spezia
limpla
ntate
DET-Schraube (Dynamische Epiphysen-Teleskop-Schraube)
∙ für Epiphysiolysis capitis femoris∙ Implantatestahl∙ Art.-Nr. DET-Schraube: 6.285.xx∙ Art.-Nr. Hülse: 6.286.xx
Rep-Ret System - Ein Spezialinstrumentarium zum Reponieren und Retinieren
∙ Implantatestahl∙ Art.-Nr. 19.424.00 (Kleinfragment)∙ Art.-Nr. 19.425.00 (Großfragment)
DET-Schraube
Rep-Ret System
∙ Indikation: Bei periprothetischen Frakturen∙ Implantatestahl
Winkelstabile CPL-Platten mit Kerben∙ für Schrauben Ø 4.5/6.0 mm∙ Art.-Nr. 4.2441.xx (Plattenbreite 12 mm, Seil Ø 1.0 mm)∙ Art.-Nr. 4.2451.xx (Plattenbreite 16 mm, Seil Ø 1.5 mm)
Winkelstabile CPL-Platte mit Kerben
OP-Set DET-Schraube ∙ komplett, Stahl∙ Art.-Nr. 19.501.00
OP-Set Seilosteosynthese nachProfessor Labitzke∙ Seile Ø 1,0∙ Art.-Nr. 19.518.00
OP-Set Seilosteosynthese nachProfessor Labitzke∙ Seile Ø 1.5∙ Art.-Nr. 19.518.00/1
OP-Set Plattenseilosteosynthese
∙ Art.-Nr. 19.516.00
30 Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Spez
ialim
pla
ntate
∙ Spezielle Instrumente für ein sicheres Entfernen von Schrauben mit überdrehtem Innensechskant, festsitzenden Schrauben und abgebrochenen Schraubenschäften
∙ Art.-Nr. 19.511.00
∙ Dynamische Hüft∙ und Kondylenschraube
∙ OP-Set Instrumente, komplett Art.-Nr. 19.120.00
∙ OP-Set Implantate, komplett Art.-Nr. Stahl: 19.121.00 Art.-Nr. Titan: 19.122.00
IMPLANTEX®
DHS Dynamische Hüft- und Kondylenschraube
Perkutaner Kompressionsdraht
∙ Perkuntaner Kompressionsdraht zur Versorgung von Fingerschaftfrakturen∙ Ø 1.2 mm/ 1.8 mm x 150 mm ∙ Gewindeabstand: 5 mm / 10 mm / 15 mm∙ Implantatestahl∙ für einfache Quer∙ und Schrägfrakturen des Fingergrund∙ und Mittelgliedschafts∙ Art.-Nr. 2.919.18/xx
31Tel +49 36738 498 - 550 | Fax +49 36738 498 - 559 | [email protected] | www.koenigsee-implantate.de
Spezia
limpla
ntate
Durchbohrte Schrauben
Durchbohrte Schrauben allgemein:
∙ selbstschneidend (ss), selbstbohrend (sb) und rückschneidend (rs)∙ erhältlich in den Durchmessern 2.7 mm / 3.5 mm / 4.0 mm / 4.5 mm / 6.5 mm und 7.0 mm∙ Schrauben mit Durchmessern 2.7 mm / 4.0 mm und 6.5 mm mit TiOB®- optimierter Oberläche∙ Titanlegierung
∙ erhältlich als Komplett-Sets mit Instrumenten und Implantaten
Durchbohrte Schrauben Ø 2.7
∙ Komplett-Set Art.-Nr. 19.170.00
∙ Schrauben sb, ss, Teilgewinde Längen 10 - 60 mm Art.-Nr. 3.448.xx
∙ Schrauben sb, ss, Vollgewinde Längen 10 - 60 mm Art.-Nr. 3.450.xx
Durchbohrte Schrauben Ø 3.5
∙ Komplett-Set Art.-Nr. 19.184.00
∙ Schrauben sb, ss, rs,Teilgewinde Längen 10 - 70 mm Art.-Nr. 3.504.xx
∙ Schrauben sb, ss, rs, Vollgewinde Längen 10 - 70 mm Art.-Nr. 3.604.xx
Durchbohrte Schrauben Ø 4.0
∙ Komplett-Set Art.-Nr. 19.190.00
∙ Schrauben sb, ss, rs,Teilgewinde Längen 10 - 70 mm Art.-Nr. 3.440.xx
∙ Schrauben sb, ss, rs, Vollgewinde Längen 10 - 70 mm Art.-Nr. 3.445.xx
Durchbohrte Schrauben Ø 4.5
∙ Komplett-Set Art.-Nr. 19.203.00
∙ Schrauben sb, ss, rs, Teilgewinde Längen 20 - 72 mm Art.-Nr. 3.434.xx
∙ Schrauben sb, ss, Vollgewinde Längen 20 - 72 mm Art.-Nr. 3.439.xx
Durchbohrte Schrauben Ø 6.5
∙ Komplett-Set Art.-Nr. 19.210.00
∙ Schrauben sb, ss, rs,Gewinde 16 mm Längen 30 - 130 mm Art.-Nr. 3.520.xx
∙ Schrauben sb, ss, rs, Gewinde 32 mm Längen 45 - 130 mm Art.-Nr. 3.523.xx
Durchbohrte Schrauben Ø 7.0
∙ Komplett-Set Art.-Nr. 19.223.00
∙ Schrauben sb, ss, rs,Gewinde 16 mm Längen 30 - 130 mm Art.-Nr. 3.414.xx
∙ Schrauben sb, ss, rs, Gewinde 32 mm Längen 45 - 130 mm Art.-Nr. 3.424.xx
OTEOYNHESEProduktübersicht
Königsee Implantate GmbHOT Aschau | Am Sand 407426 Allendorf/Thüringen Deutschland
info@ koenigsee-implantate.dewww.koenigsee-implantate.de
Wiedergabe des Inhalts, auch auszugsweise, nur mit schriftlicher Genehmigung des Herausgebers.Copyright © Königsee Implantate GmbH / HeBo | DSA.08.34000DE | Edition 08 | Februar 2017
Alle Angaben sind freibleibend und unverbindlich. Maßgebend sind unsere Produktkennzeichnungen und Herstellerinformationen. Inhalt vorbehaltlich Redaktionsversehen, Druckfehlern bzw. Fehlinformationen aufgrund fehlerhafter elektronischer Datenübertragung. Technische Änderungen vorbehalten.
Fon +49 36738 498 - 550Fax +49 36738 498 - 559 zertiiziert nach
EG Richtlinie 93/42/EWGEN ISO 13485