Detects Contamination
Vacuum Regulators
Sentinel Series Scout Series
Top Mounted Selector
Battery Level Indicator
Clear Back Plate
Large, Easy to Read Color-Coded Gauges
User Adjustable Intermittent Timing
Flexible ABS Polymer Casing
(impact resistant and durable)
Features
• (Sentinel Only) Only regulator that detects contamination in REAL TIME
• (Scout Only) Only regulator on the market with a disposable, see-through back body
• Disposable body eliminates need for cleaning
• Helps to eliminate the dangers of over-suctioning by virtue of design
• Quick and easy maintenance - serviced in under 2 minutes
• Full bodied color-coding options for inventory management
• Ability to upgrade from Analog to Digital gauge
• Ability to reverse flush
• Warranty Periods:
Territory Sentinel Scout
North America 12 Years 12 Years (Analog & Digital)
10 Years 10 Years (Analog) 12 Years 12 Years (Digital)
International 5 Years 5 Years (Analog & Digital)
5 Years 5 Years (Analog & Digital)
Continuous Models - White LabelsContinuous
3 ModeContinuous
2 ModePediatric 2 Mode
Neonatal 2 Mode
Continuous High/Surgical
SSA-C3U2-F2 SSA-C2U2-F2 SSA-P2U2-F2 SSA-N2U2-F2 SSA-CHU2-F2
Continuous/Intermittent Models - Grey LabelsAdult
Continuous/IntermittentPediatric
Continuous/IntermittentNeonatal
Continuous/Intermittent
SSA-CIU2-F2 SSA-PIU2-F2 SSA-NIU2-F2
By Department:
ED
Pediatrics
ICU
By Model: Surgical/Continuous High
Continuous/Intermittent
Pediatrics
Neonatal
Color-Coding Options - Ease of Inventory Management
2 Amico Patient Care Corporation
• 37% of regulators in hospitals are contaminated*• Contaminants include “growth of well-established nosocomial pathogens“ known to cause Hospital Acquired Infections (HAI)*• Contaminants spread from a regulator to the wall-side canister and back to a patient’s stomach within 24 hours*
How Contamination Spreads
Identify and Remove Contamination
Reverse Flush with a Cold Sterilant or Discard the Contaminated Body
CONTAMINATEDCONTAMINATED
Contamination is Detected with Sensor or Clear Back Plate
Remove Contaminated Body
Reassemble with only 1 NEW Component Reset the Regulator (Sentinel Only)
Clear Back PlateSensor Remove from the
outlet and identify contamination immediately
Detectscontamination
Sentinel Series Scout Series
Vacuum Regulators
* Suction Regulators: A Potential Vector for Hospital Acquired Pathogens by Keith S. Kaye, MD, MPH; Dror Marchaim, MD; Chester Smialowicz, MD; Lauren Bentley, MSBME
Did You Know?
Step 5
Step 3
Step 4
Step 2
Step 1
3 www.amico.com
Vacuum Regulators
Model Numbers
SXY-ZZXY-ZZ(X)*
Vacuum Regulator TypeCI = Continuous/IntermittentC2 = Continuous 2 ModeC3 = Continuous 3 ModeCH = Continuous High/SurgicalPI = Pediatric/IntermittentP2 = Pediatric 2 ModeNI = Neonatal/IntermittentN2 = Neonatal 2 Mode
Inlet ConnectionF2 = 1/8" FNPTDH = DISS HandtightDN = DISS NutOM = Ohmeda MaleCM = Chemetron MalePB = Puritan BennettMS = MedstarOX = OxequipBM = British MaleGM = German Male (DIN)FM = French MaleDO = Locking DISS Nut
Color CodingU = USAI = ISO
**Color CodingR = RedB = BlueG = GreenP = PurpleY = YellowN = PinkZ = Baby Blue
DisplayA = AnalogD = Digital
SeriesR = ScoutS = Sentinel
Patient Connection2 = 1/8" FNPTD = DISS MaleT = Tubing NippleV = 1/8" NPT
Vacuum Trap Connection
H = DISS Handtight Vacuum Trap Connection
N = DISS Nut Vacuum Trap Connection
* For MR Conditional, please add “-M” to the end of the part number (available for Adult and Analog units only)
** If no color is specified: White is the standard for all Scout and Sentinel vacuum regulators
Vacuum/Safety Traps Autoclavable Canisters and Holders
Disposable Canisters and Holders
• Overall height 30" (76.2 cm)
• 5 swivel casters – 2” (5.08 cm)
• Stainless steel body
• Top handle for easy mobility
• Side hook for excess tubing or hoses
• 2 mounting locations for suction canister placement
• Regulator mount (VAC DISS Male) – available for single or dual regulators
Part#: S-RS-30-DISS-S**Canisters, holders, tubing, and suction regulator not included
Roll Stand for Vacuum Regulators
Accessories
SOT-FLOWMETER-VACUUM-REGULATOR-SPECS 05.28.2021
Dual/Y-block Flowmeter Assembly
FMX-XXY-XX(YY)*
LPM02 = 200 CCM01 = 1 LPM03 = 3.5 LPM08 = 8 LPM15 = 15 LPM70 = 70 LPM
Color CodingU = USA I = ISO
Connection TypeF2 = 1/8" FNPTDH = DISS HandtightDN = DISS NutOM = Ohmeda MaleCM = Chemetron MalePB = Puritan BennettMS = MedstarOX = OxequipBM = British MaleGM = German Male (DIN) FM = French MaleDO = DISS Outlet
GasO = OxygenA = Medical Air
*OptionsPT = Power Takeoff-D = Dial-S = Swivels-M = MR Conditional**
** Some restrictions apply
Model Numbers
Flowmeters
Amico Patient Care Corporation 122 East Beaver Creek Road, Richmond Hill, ON L4B 1G6, CanadaToll Free Tel: 1.877.462.6426 | Toll Free Fax: 1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862 | www.amico.com
Thorpe Style
Dial Style
Features
• Complete line of Flowmeters from Neonatal to Adult
• Standard 1/8" FNPT connection, but also customizable with different adapters and accessories
• MRI options are available
• Available in USA and ISO colors
• Smallest and lightest chromed, brass bodied Flowmeter in the industry
• Color coded inner tube and labeling
• Easy to service
• No strip “D” shape knob
• Includes an inlet filter and inlet extension
• 5 year warranty North America (3 year International)
Accessories
Swivels/Christmas TreesReusable Humidifier Power Takeoff Flowmeter Chain
Easy to Read White Backgroud
“D” Shaped Knob
Chromed Brass Body
Swivel