White
USG ENSEMBLE™ ACOUSTICAL DRYWALL CEILING SEAMLESS DRYWALL LOOK WITH TRUE ACOUSTICAL PERFORMANCE
FEATURES
• Nondirectional, monolithic appearance• Special perforated USG Sheetrock® Brand panels to optimize sound
performance• Installs and fi nishes similar to traditional wallboard• NRC 0.80 and CAC 44• High light-refl ective fi nish (LR-0.85) reduces fi xture and energy use• Acoustically transparent spray-applied fi nish
APPLICATIONS
• Reception areas• Lobbies• Conference rooms• Restaurant dining areas• Museums • Galleries• Spaces with multiple hard surfaces
• Courtrooms• O� ces• Classrooms/ higher education • Libraries• Healthcare o� ces and lobbies• Retail
White
USG Ensemble™ Acoustical Drywall Ceiling
with USG Compässo™ Elite for drywall edge trim.
USG Ceiling Solutions
SC2791/rev. 4-18© 2018 USG Corporation and/or its a� liates. All rights reserved.Printed in U.S.A.
Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661
NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.
ORDER SAMPLES/LITERATUREUSG: [email protected]
fax: 888 874-2348 | usg.comCGC: contact Sales Representative
TECHNICAL SERVICES800 USG.4YOU (874-4968)
TECHNICAL INFORMATION usg.com/ensemble
PERFORMANCE DATA Base Panel Backer Panel NRC CAC LR
USG Sheetrock® Brand Ensemble™ Panels 1" USG Ensemble™ High-NRC 0.80 44 0.85
ASTM E84 and CAN/ ULC S102 surface burning characteristics: Class A. Non-fi re-rated applications only.
SYSTEM COMPONENTS Products Item Number Sizes Packaging Quantity Notes
USG Drywall Suspension Main Tees DGLW26 12' 16 pc. carton 192 LF/ctn Main Tees 16" o.c., no cross tees
Indexed Support Bar ISB109 109" 16 pc. carton 145 LF/ctn 48" o.c.
Indexed Support BarAttachment Clip
ISBAC N/A 100 pc. carton25 pc. carton
N/A Attach at main tee/ISB intersection 48" o.c.
5/8" USG Sheetrock® Brand Ensemble™ Panels
ENSPNL112A 5/8" x 9'-4" 26 pc. unit 970.3 sq. ft./ unit Gypsum panel highly engineered to perform likean acoustical ceiling panel
1" USG Ensemble™ High-NRC Backer Panels
ENSHINRC 16" x 48" 4 pc. unit 21.3 sq. ft./carton Acoustical base mat for High NRC, CAC
5/8" USG Fiberock® Brand End-Joint Backer Panel
ENSFIBEJB 5/8"x15.5" x 48" 1 pc. unit 5.2 sq. ft./panel Backer for fl oating end-joints
USG Sheetrock® Brand Paper Joint Tape
— 250' roll 1 pc. unit 20 roll/ ctn5000 LF/ ctn
Specially formulated paper tape
USG Sheetrock® Brand All Purpose Joint Compound
USAPJC 4.5 gal. pails Single pail48 pail pallet
216 gal./pallet Coverage450 sq. ft./4.5 gal. pail
USG Sheetrock® Brand Ensemble™ Ceiling Compound
ENSCJC 4.5 gal. pail Single pail48 pail pallet
216 gal./pallet Coverage 480 sq. ft./4.5 gal. pail
USG Ensemble™ Spray-Applied Finish, White
ENSSPRAF 4.5 gal. pail Single pail 48 pail pallet
216 gal./pallet Coverage 100 sq. ft./4.5 gal. pail
INSTALLATION DETAILS USG Ensemble™ Acoustical Drywall Ceiling Perspective
Indexed Support Bar, ISB109 (48" o.c.)
USG Ensemble™Spray Applied Finish
USG Compässo™ Elite for Drywall
DGLW26, drywall suspension main tee (16" o.c.)
Indexed Support Bar Attachment Clipinstalled at every hanger wire (48" o.c. max.)
USG Ensemble™ High-NRC Backer panels
12 ga. hanger wire
USG Sheetrock® Brand Paper Tape embedded in USG Sheetrock® Brand All Purpose Joint Compound and finished with USG Sheetrock® Brand Ensemble™ Ceiling Compound
USG Sheetrock® Brand Ensemble™ Panels
USG Fiberock®Brand End-joint Backer Panel
LIMITATIONS 1. For interior ceilings only.2. Not for use in areas subject to continuous high heat and/or humid conditions.3. Not for use in plenums with di� erential pressure. Return air ducts shall be installed according to ASHRAE standards and guidelines.. 4. Install according to Section 5 Environmental Conditions listed in ASTM C840.5. In order to ensure installed performance, component substitutions are not permitted.
USG ENSEMBLE™ ACOUSTICAL DRYWALL CEILINGSEAMLESS DRYWALL LOOK WITH TRUE ACOUSTICAL PERFORMANCE
The trademarks USG, CGC, COMPÄSSO, ENSEMBLE, FIBEROCK, SHEETROCK, IT’S YOUR WORLD. BUILD IT., the USG and CGC logos, the design elements and colors, and related marks are trademarks of USG Corporation or its a� liates.
Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specifi cation and installation.