w w w . u n i v e r - g r o u p . c o m
CylindersHigh-TechValvesAir treatmentAccessoriesPower ClampsPr
oduc
t Ove
rvie
w
Pneumatic Automation | Automotive
Univer > ()
www..com
In light of technical updates, Univer S.p.A. reserves the right to modify technicalfeatures of their products with no obligation to issue prior notice.
Information contained in the present catalogue is pure indication, for further details about product technical features and related parameter values to be respected for a proper functioning, please refer to the datasheets available at:www.univer-group.com
All rights reserved to Univer S.p.A.,Unauthorized reproduction prohibited.
Univer > ()
www..com
www.univer-group.com
UNIVER has started its activity in the field of industrial automation during the 1970s, with the production of its first series of pneumatic valves and poppet valves for vacuum.
In the following decades, the widening range of technologically advanced and original pneumatic components has allowed the continuous growth and development of the company, which has become one of the major Italian businesses in the production of industrial automation equipment.
In 2000, after many years of experience in the supply of pneumatic components to the automotive market, the Automotive Division was created, thus developing numbers of solutions for BIW in the automotive industry.
The Electronic division, supporting both Pneumatic Automation and Automotive divisions, is specialized in the study, design and manufacturing of the electric and electronic devices which are integrated in UNIVER products.
Product and process engineering, as well as testing, production and customer service are attended in compliance with severe quality standards.
The sales network is coordinated by UNIVER S.p.A. Headquarters in Milan.
In Italy, the commercial company UNIVER SERVICE S.r.l. controls the domestic market and guarantees a quick and efficient service, thanks to different operational offices and distributors in the whole country.
UNIVER Group has many direct branches and an active distribution network covering the most important industrialized areas.
UNIVER is a UNI EN ISO 9001:2008 certified company
Production and assemblyLab testsResearch and development
Milano - Headquarters
I - 20128 MilanoVia Eraclito, 31 Tel. +39 02 25298.1 Fax +39 02 [email protected]
UNIVER S.p.A. Headquarters
Univer > ()
www..com
21 3
2 4
Cylinders
21
Rotatingcylinders
Standards-based cylinders
Short-strokecylinders
Rodlesscylinders
Guidedcylinders
Shockabsorbers
MKLKEKDK
4689
10
Standards-basedcompact cylinders
RPRMRORNRSRQ
121314151718
Ovalcylinders
OV 20
W
RYR2YR3
222324
S1S5
VL1
262728
303334
JJL
JT/JX
YDA/YDR 35
Locking units L1-NL63738
Telescopiccylinders
RT 40
Pneumatic actuators
NTZNQZNFZ
42/43
Pneumaticgrippers
YMAYMP 44/45
COMPACTvalves
Electropilots
Poppet valves
Serialconnections
Accessories
Complementary valves
B11/B10/B12BA
AAAB
Standards-basedvalves
BE/BE12AEBD
AC-N
56596166
Spool valves
128TC
YRAP/AMHZ9N
YFYG-6300
CL/CMEF
G6/GL6G7PS
ACCH
AF/AGAI
AI-JETAM
COILSBUTTONS
130132
134136138139140
677477
78/818587
9294
96/98100
101/103104
47/48/4951525354
Valves
High-Tech
Air treatmentunits
HZE 142
Pressure Gauges HZ9 149
Air treatment
P10P15
P15EFP15EB
106115124126
Regulators andtransducers
Microregulators
HZRP/HZRE
HZRM
150
151
Univer > ()
www..com
35
6
7
8
>
Fittings and tubes
166
Ogive fittings
Push-in Fittings
Push-out fittings
Quick couplings
Tubes
HAHARHB
152155156
Fittings withpneumatic functions
HC 159
Standardfittings
HD 163
HGC
HGO 168
HGU 169
170HE/HF
Sensors
Magnetic andelectronic sensors
DFDH/KM
DF-R/DF-T
171172172
Assembly kits
ISO 6432ISO 15552
MKL/K/KE/KD 173
RP/RMRO/RN
RSRQ
174
Rodlesscylinders
S1S5
VL1175
ISO 21287
Automotive
Pin clamps
PneumaticPower clamps
Retractable locating pin units withhandlever
Gripper units
Power pivots
Retractable locating pin units
179
Marking units
Electrical units
Accessories
Product Index
180
LCMLCLLCOLCYLCX
180
LSPLSP50U
LTPLUPLSL
181UGPUGMLGP
181DMALAGP
181PRP
182
LAELNELGELCE
LAGE
182CLAMPING ARMS
UBKUBF
CertificationsAnalytical index
187189
Modular Tooling System
184GR8
UBP/UBHIBPUBSUDP
UBM/UBQIBMUBT
UFL/UHLUNPUNMDMS
LCPLCGLCZLCTLCA
178/179
Univer > ()
www..com
1 Subject to change4
-20 80 Cfi ltered air, with or without lubrication
1,5 10 bar
aluminium, crimped on barrelstainless steel
brass (816), aluminium (20-25)acetalic resin
stainless steelnitrile rubber
standard suppliednitrile rubber
pneumatic adjustable (1625)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushionings
M 8 25 mm - ISO 6432 Microcylinders
M190 version with high temperature seals (Max 120C) available upon request
1
M
1 Series
4 Bore (mm) Option
M = 825 mm - ISO 6432 Microcylinders
1 0 0 0 0 5 0
2
0 2 5
4 5
D.A. = Double acting S.A. = Single acting
2 Type
5 Stroke (mm)
3
Stainless steel piston rod (standard vesion)Chromium-plated steel piston rod (to be used only with locking unit)Reduced version with stainless steel piston rod
1 =
2 =
3 =
3 Version
D.A. Standard versionD.A. Through piston rodD.A. With adjustable cushionings (1625)
00 =01 =50 =
D.A. Through piston rod with adjustable cushionings (1625)S.A. Retracted piston rod (1025),Max stroke 50 mmS.A. Extended piston rod (1625),Max stroke 25 mm
51 =
60 =
70 =
CODIFICATION KEY
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
81012162025
MF-15008MF-15008MF-15012MF-15012MF-15020KF-15032
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge
Angle bracket Flange Nutfor end-cap
Holder forDF sensor
Holder forDH sensor
MF-17008MF-17008MF-17012MF-17012MF-17020KF-17032
--
MF-22016MF-22016MF-22020KF-22025
--
MF-23012MF-23012MF-23020KF-23025
--
MF-24012MF-24012MF-24020KF-24032
MF-21008MF-21008MF-21012MF-21016MF-21020MF-21025
MF-13008MF-13008MF-13012MF-13012MF-13020MF-13020
MF-12008MF-12008MF-12012MF-12012MF-12020MF-12020
MF-20008MF-20008MF-20012MF-20012MF-20020MF-20020
-DH-M10DFDH-M12DFDH-M16DFDH-M20DFDH-M25DF
-DH-M10DH-M12DH-M16DH-M20DH-M25
DF sensor
81012162025
DF
DH sensor
DH
CHARACTERISTICS
6 7
6 Magnetic
M = Magnetic version (1025)
7
F = Preset for locking unit reduced protrusion
008 = 8010 = 10012 = 12016 = 16020 = 20025 = 25
Through piston rod Reduced version with adjustable cushionings
0010 = 100020 = 200025 = 250030 = 300040 = 400050 = 500075 = 75
0250 = 2500300 = 3000320 = 3200400 = 4000500 = 500
0080 = 800100 = 1000125 = 1250150 = 1500160 = 1600175 = 1750200 = 200
Univer > ()
www..com
NEW
KD
KL
KE
K 160/200
Assembly Kitavailable for all series
CLEAN PROFILEEasier to clean
QUICK INSTALLATIONSensors and connections on one side
UNIVER TECHNOLOGYStrong and Reliable
ISO 15552Interchangeability
KL
CLEAN PROFILE
ISO 15552 CylindersK
32 125 mm
32 125 mm
32 125 mm
160 - 200 mm
Univer > ()
www..com
1NEW
Subject to change6
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiumanodised aluminium
die-cast aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubber
UNIVER original self-lubricating and self-aligning nitrile rubber
pneumatic adjustabletandem, two-position tandem,
opposed, with common piston rod
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsOther available versions
- KL 32 125 mm - ISO 15552 Pneumatic cylinders
CLEAN PROFILE
CODIFICATION KEY
1
K 2 0 0 0 3 2 0 0 5 0L
D.A. = Double acting S.A. = Single acting
1 Series 2 Type Bore (mm)
Stroke (mm)
KL = 32125 mm - ISO 15552 Pneumatic cylinders Magnetic version standard supplied
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
3240506380
100125
KF-15032KF-15040KF-15050KF-15050KF-15080KF-15080KF-15125
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
Narrow female hinge
with pin
Articuled counter hinge
KF-17032KF-17040KF-17050KF-17050KF-17080KF-17080KF-17125
KF-22032KF-22040KF-22050KF-22050KF-22080KF-22080
-
KF-23032KF-23040KF-23050KF-23050KF-23080KF-23080
-
KF-24032KF-24040KF-24050KF-24050KF-24080KF-24080
-
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100AKF-10125A
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTAKF-19125CTA
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
-
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CNKF-19063080CNKF-19100125CNKF-19100125CN
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100ASKF-10125AS
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SCKF-19125SC
Articulated rear male
hinge
3240506380
100125
KF-11032SKF-11040SKF-11050SKF-11063SKF-11080SKF-11100SKF-11125S
Rear male hinge
Front / rearfl ange
Angle bracket Front / rearhinge with fl oating pin
Support for hinges
ISO intermediate
hinge
Cable clamping for DF sensor
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100KF-11125
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100KF-12125
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100KF-13125
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100APKF-14125AP
KF-41032KF-41040050KF-41040050KF-41063080KF-41063080KF-41100125KF-41100125
KLF-14032KLF-14040KLF-14050KLF-14063KLF-14080KLF-14100KLF-14125
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
KL190 and KL290 versions with high temperature seals (Max 120C) and version with low temperature seals (Max -40C) available upon request
Option
2
3 Version2
00 = D.A. Standard version01 = D.A. Through piston rod60 = S.A. Retracted piston rod Max stroke 50 mm70 = S.A. Extended piston rod Max stroke 50 mm
4
032 = 32040 = 40050 = 50063 = 63
080 = 80100 = 100125 = 125
3 Version
1 = Stainless steel piston rod2 = Chromium-plated steel piston rod
6
M
73 4 5
5 7
F = Preset for locking unit reduced protrusionG = Preset for locking unit ISO protrusion
6 Magnetic
M = Magnetic version standard supplied
0025 = 250050 = 500075 = 75 0080 = 80 0100 = 100 0125 = 125
0320 = 3200350 = 3500400 = 4000450 = 4500500 = 5000600 = 600
0150 = 1500160 = 1600175 = 1750200 = 2000250 = 2500300 = 300
0700 = 7000800 = 8000900 = 9001000 = 1000
Univer > ()
www..com
UNIVER GROUP
1
1
Cylin
ders
Subject to change 7
KL 32 125 mm - ISO 15552 Pneumatic cylinders
Standard fi xing elementsUNIVER Original
Tube profi le with integratedsensor groovesUNIVER Original since 2005
Fixing screws integrated inthe end cap profi le
Possibility to mount DHsensors with brackets
Intermediate hinge with lockingsystem guaranteed by UNIVERAUTOMOTIVE expertise
Magnetic pistonstandard supplied
Sensor grooves availablein diff erent positions
Recessed sensorDF series
1
6
2
4
5
3
1
2
4
3
5
6 UNIVER Original self-aligning and self-lubricating guide bush for piston rod
Lip piston seals in nitrile rubber compound
Guide slide in acetalic resin with integrated magnetic ring
Wear-resistant shock absorbers seals in nitrilic rubber compound
Die-cast piston in aluminium alloy
Die-cast end caps in aluminium alloy
Further available versions
Cylinder with L1-N locking unit Tandem cylinderTwo-position tandem cylinder
Opposed cylinders Cylinders with common piston rod
Univer > ()
www..com
1 Subject to change8
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminium alloyanodized aluminium
die-cast aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubber
UNIVER original self-lubricating and self-aligningnitrile rubber
pneumatic adjustabletandem, two-position tandem,
opposed, with common piston rod
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsOther available versions
KE 32 125 mm - ISO 15552 Pneumatic cylinders
D.A. = Double acting S.A. = Single acting
1
K 2 0 0 0 3 2 0 0 5 0
52 3 4
E
1 Series Type
Stainless steel piston rodChromium-plated steel piston rod
1 =2 =
KE = 32125 mm - ISO 15552 Pneumatic cylinders
3 Version
D.A. Standard versionD.A. Through piston rodS.A. Retracted piston rod Max stroke 50 mmS.A. Extended piston rod Max stroke 50 mm
00 =01 =60 =70 =
Stroke (mm)
4 Bore (mm)
032 = 32040 = 40050 = 50063 = 63
080 = 80100 = 100125 = 125
CODIFICATION KEY
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
3240506380
100125
KF-15032KF-15040KF-15050KF-15050KF-15080KF-15080KF-15125
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
Narrow female hinge
with pin
Articulated counter hinge
KF-17032KF-17040KF-17050KF-17050KF-17080KF-17080KF-17125
KF-22032KF-22040KF-22050KF-22050KF-22080KF-22080
-
KF-23032KF-23040KF-23050KF-23050KF-23080KF-23080
-
KF-24032KF-24040KF-24050KF-24050KF-24080KF-24080
-
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100AKF-10125A
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTAKF-19125CTA
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
-
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100ASKF-10125AS
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SCKF-19125SC
Articulated
rear male hinge
3240506380
100125
KF-11032SKF-11040SKF-11050SKF-11063SKF-11080SKF-11100SKF-11125S
Rear male hinge
Front / rearfl ange
Angle bracket Front / rearhinge with fl oating pin
Support for hinges
ISOIntermediate
hinge
DH sensor Mounting bracket forDH sensor
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100KF-11125
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100KF-12125
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100KF-13125
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100APKF-14125AP
KF-41032KF-41040050KF-41040050KF-41063080KF-41063080KF-41100125KF-41100125
KLF-14032KLF-14040KLF-14050KLF-14063KLF-14080KLF-14100KLF-14125
DH-K032050DH-K032050DH-K032050DH-K063125DH-K063125DH-K063125DH-K063125
DF sensor and DHF covering
strip
DFDHF-0020100 DH
KE190 and KE290 versions with high temperature seals (Max 120C) available upon request
Option
F = Preset for locking unit reduced protrusion G = Preset for locking unit ISO protrusion
6
6
ISOIntermediate
hinge
KF-14032KF-14040KF-14050KF-14063KF-14080KF-14100KF-14125
K = 32125 mm - ISO 15552 Pneumatic cylinders (former ISO 6431 VDMA 24562) (available upon request)
KKE
2
5
7
Magnetic7
M = Magnetic version0025 = 250050 = 500075 = 750080 = 800100 = 1000125 = 125
0320 = 3200350 = 3500400 = 4000450 = 4500500 = 5000600 = 600
0150 = 1500160 = 160 0175 = 175 0200 = 2000250 = 2500300 = 300
0700 = 7000800 = 8000900 = 9001000 = 1000
* * *
* = Fixing elements and accessories for K series
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CNKF-19063080CNKF-19100125CNKF-19100125CN
Univer > ()
www..com
11
Cylin
ders
Subject to change 9
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiumanodized aluminium
die-cast aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubber
UNIVER original self-lubricating and self-aligningnitrile rubber
pneumatic adjustabletandem, two-position tandem,
opposed, with common piston rod
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsOther available versions
KD 32 125 mm - ISO 15552 Pneumatic cylinders
HEAVY SERIES TUBE
CODIFICATION KEY
D.A. = Double acting S.A. = Single acting
1
K 2
2
0 0 0 3 2 0 0 5 0
4 53
1 Series 2 Type
Stainless steel piston rodChromium-plated steel piston rod
1 =2 =
KD = 32125 mm - ISO 15552 Pneumatic cylinders (former ISO 6431 and VDMA 24562) Magnetic version standard supplied
5 Stroke (mm)
3 Version
D.A. Standard versionD.A. Through piston rodS.A. Retracted piston rod Max stroke 50 mmS.A. Extended piston rod Max stroke 50 mm
00 =01 =60 =70 =
4 Bore (mm)
032 = 32040 = 40050 = 50063 = 63
080 = 80100 = 100125 = 125
D
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
3240506380
100125
KF-15032KF-15040KF-15050KF-15050KF-15080KF-15080KF-15125
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
Narrow female hinge
with pin
Articulated counter hinge
KF-17032KF-17040KF-17050KF-17050KF-17080KF-17080KF-17125
KF-22032KF-22040KF-22050KF-22050KF-22080KF-22080
-
KF-23032KF-23040KF-23050KF-23050KF-23080KF-23080
-
KF-24032KF-24040KF-24050KF-24050KF-24080KF-24080
-
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100AKF-10125A
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTAKF-19125CTA
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
-
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CNKF-19063080CNKF-19100125CNKF-19100125CN
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100ASKF-10125AS
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SCKF-19125SC
3240506380
100125
KF-11032SKF-11040SKF-11050SKF-11063SKF-11080SKF-11100SKF-11125S
Front / rearfl ange
Angle bracket Front / rearhinge with fl oating pin
Hinge support ISO Intermediate
hinge
DF sensor and DHF covering
strip
Cable clamping for DF sensor
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100KF-11125
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100KF-12125
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100KF-13125
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100APKF-14125AP
KF-41032KF-41040050KF-41040050KF-41063080KF-41063080KF-41100125KF-41100125
KDF-14032KDF-14040KDF-14050KDF-14063KDF-14080KDF-14100KDF-14125
DFDHF-0020100
DF-001
KD190 and KD290 versions with high temperature seals (max 120C) available upon request
Articulated rear male
hinge
Rear male hinge
Option6 Magnetic
M = Magnetic version standard supplied
7
F = Preset for locking unit reduced protrusion G = Preset for locking unit ISO protrusion
6 7
M
0025 = 250050 = 500075 = 750080 = 800100 = 1000125 = 125
0320 = 3200350 = 3500400 = 4000450 = 4500500 = 5000600 = 600
0150 = 1500160 = 160 0175 = 175 0200 = 2000250 = 2500300 = 300
0700 = 7000800 = 8000900 = 9001000 = 1000
Univer > ()
www..com
1 Subject to change10
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiumanodised aluminium
zinc-plated steeldie-cast aluminium
acetalic resinchromium-plated steel, stainless steel upon request
NBRNBR
pneumatics adjustabletandem, two position tandem,
opposed, with common piston rod
Ambient temperatureFluidWorking pressure
End-capsBarrelTie-rodsPistonGuide slidePiston rodPiston rod scraper saelsPiston sealsCushioningsOther available versions
K 160/200 mm - ISO 15552 Pneumatic cylinders
1
K 2
2
0 0 0 8 0
4 53
4 Bore (mm)
160 = 160200 = 200
2 Type
Stainless steel piston rodChromium-plated steelpiston rod
1 =2 =
1 Series
K = 160/200 mm - ISO 15552 Pneumatic cylinders
3 Version
D.A. Standard versionD.A. Through piston rod
00 =01 =
D.A. = Double acting
5 Stroke (mm)
1 6 0
CODIFICATION KEY
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
160200
KF-15160KF-15160
Articulated self-lubricating
fork
Female rear hinge with pin
Rear male hinge
Front/rearfl ange
Angle bracket Front / rearhinge with
fl ioating pin
Articulated rear male
hinge
KF-17160KF-17160
KF-10160AKF-10200A
KF-11160KF-11200
KF-12160KF-12200
KF-13160KF-13200
KF-14160APKF-14200AP
KF-11160SKF-11200S
Counter hinge 90 (CETOP)
KF-19160CTAKF-19200CTA
Narrow femalehinge with pin
KF-10160ASKF-10200AS
Hinge support
KF-41160200KF-41160200
ISO
intermediate hinge
160200
KF-14160KF-14200
DH sensor Mounting bracket forDH sensor
DH-K160200DH-K160200
DH
K190 and K290 versions with high temperature seals (Max 120C) available upon request
0
6
6 Magnetic
M = Magnetic version
Upon request 250/320 mm
0025 = 250050 = 500075 = 750080 = 800100 = 1000125 = 125
0320 = 3200350 = 3500400 = 4000450 = 4500500 = 5000600 = 600
0150 = 1500160 = 160 0175 = 175 0200 = 2000250 = 2500300 = 300
0700 = 7000800 = 8000900 = 9001000 = 1000
KF-19160200CNKF-19160200CN
Counter hinge 90 (CNOMO)
160/200 Cylinder with profi led tube(version available upon request)
Univer > ()
www..com
RP/RM
RO/RN
RP210
F
Assembly Kitavailable for all series
16202532405063
Nm0,50,8
12358
Version non-rotating (octagonal tube)Max load (Nm)
No change in dimensions comparing to an equivalentcylinder without cushionings
Standard supplied for all models
With anti-rotation guides 16 63 mm
STANDARDS-BASEDAvailable in compliance with UNITOP andISO 21287 standards
STANDARD ANDOCTAGONAL TUBEAvailable in standard version and non-rotatingversion with UNIVER Original octagonal tube
UNITOP - ISO 21287 Compact cylinders RP/RM-RO/RN
Adjustable pneumaticcushioningUNIVER Original since 1999
Standard Octagonal
RP (UNITOP RU-2/7) 16 63 mm
RM (ISO 21287) 16 100 mm
RO (UNITOP RU-2/7) 16 63 mm
RN (ISO 21287) 16 63 mm
Univer > ()
www..com
1 Subject to change12
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiumanodized aluminium
aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed, with common piston rod (upon request)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther available versions
RP 16 63 mm UNITOP Compact cylinders
CODIFICATION KEY
4 Bore (mm)
016 = 16020 = 20025 = 25032 = 32
6 Option
1
R
1 Series
RP = 1663 mm UNITOP Compact cylinders
P 2 0 3 2
5
00
3 4
0
2 Type
2
Stainless steel female piston rodChromium-plated steel female piston rod
1 =2 =
2 5
5
6
Stroke (mm)
040 = 40050 = 50063 = 63
FIXING ELEMENTS AND ACCESSORIES
Flange
for female piston rod
16202532405063
RPF-28016RPF-28020RPF-28025RPF-28032RPF-28040RPF-28050RPF-28063
Rear female hinge with
pin
Front/rearfl ange
Angle bracket Intermediatehinge
Hinge support
---
KF-41032KF-41040KF-41040KF-41063
---
KF-10032ARPF-10040ARPF-10050ARPF-10063A
RPF-12016RPF-12020RPF-12025KF-12032
RPF-12040RPF-12050RPF-12063
RPF-13016RPF-13020RPF-13025KF-13032
RPF-13040RPF-13050RPF-13063
---
KDF-14032RPF-14040RPF-14050RPF-14063
Cable clamping for DF sensor
DF sensor and DHF covering
strip
DF-001DF
DHF-0020100
Counter hinge 90
---
KF-19032KF-19040KF-19050KF-19063
Rear male hinge
RPF-11016RPF-11020RPF-11025
----
For high temperature applications please refer to our sales o ce
D.A. = Double acting S.A. = Single acting
3 Version
D.A. Standard versionD.A. Through piston rodD.A. Non-rotating guided piston rodD.A. Non-rotating guided through piston rodD.A. Long piston (3263)S.A. Retracted piston rodS.A. Extended piston rod
00 =01 =10 =11 =20 =60 =70 =
0
Stainless steel male piston rod (4063)Chromium-plated steel male piston rod (4063)
3 =4 =
Upon request
With fl ange for versions:100-101-120-160-170200-201-220-260-270Hollow piston rod only for throughpiston rod versions without fl ange
C =
H =
Single acting0005 - 0010 (1625)0005 - 0010 - 0015 - 0020 - 0025 (3263)Double acting0005 - 0010 - 0015 - 0020 - 0025 - 0030 - 00400050 - 0060 - 0080
Max standard stroke0040 (16)0050 (20-25)0080 (3263)Max stroke with non-rotatingguided piston rod (upon request)0100 (16)0200 (20-25)0400 (32-40)0500 (50-63)
---
RSF-09032RSF-09040RSF-09050RSF-09063
Centering adaptor ring
Univer > ()
www..com
11
Cylin
ders
Subject to change 13
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiumanodized aluminium
aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed tandem,with common piston rod (upon request)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther available versions
RM 16 100 mm - ISO 21287 Compact cylinders
CODIFICATION KEY
4 Bore (mm)
016 = 16020 = 20025 = 25032 = 32040 = 40
6 Option
D.A. = Double acting S.A. = Single acting
= Hollow piston rod only for through piston rod versions without fl ange
H
1
R
1 Series
RM = 16100 mm - ISO 21287 Compact cylinders
M 3 0 3 2
5
00
3 4
0
2 Type
2
Stainless steel male piston rod Chromium-plated steel male piston rod
3 =4 =
3 Version
D.A. Standard versionD.A. Through piston rodD.A. Long piston (3263)S.A. Retracted piston rodS.A. Extended piston rod
00 =01 =20 =60 =70 =
2 5
6
5 Stroke (mm)
Single acting0005 - 0010 (1625)0005 - 0010 - 0015 - 0020 - 0025 (32100)Double acting0005 - 0010 - 0015 - 0020 - 0025 - 0030 - 00400050 - 0060 - 0080
050 = 50063 = 63080 = 80100 = 100
FIXING ELEMENTS AND ACCESSORIES
Articulated rear male
hinge
1620253240506380
100
---
KF-11032SKF-11040SKF-11050SKF-11063SKF-11080SKF-11100S
Rear male hinge
Front/rearfl ange
Angle bracket Front/rearhinge with fl oating pin
Hinge support ISO intermediate
hinge
Cable clamping for DF sensor
---
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100
---
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100
---
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100
---
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100AP
---
KF-41032KF-41040050KF-41040050KF-41063080KF-41063080KF-41100125
---
KDF-14032RPF-14040RPF-14050RPF-14063KDF-14080KDF-14100
DF sensor and DHF covering
strip
Female fork
with clips
1620253240506380
100
MF-15012MF-15020MF-15020KF-15032KF-15032KF-15040KF-15040KF-15080KF-15080
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
Narrow female hinge
with pin
MF-17012MF-17020MF-17020KF-17032KF-17032KF-17040KF-17040KF-17080KF-17080
MF-22016MF-22020MF-22020KF-22032KF-22032KF-22040KF-22040KF-22080KF-22080
MF-23012MF-23020MF-23020KF-23032KF-23032KF-23040KF-23040KF-23080KF-23080
MF-24012MF-24020MF-24020KF-24032KF-24032KF-24040KF-24040KF-24080KF-24080
---
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100A
---
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTA
---
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
---
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100AS
Centering adaptor ring
---
RSF-09032RSF-09040RSF-09050RSF-09063RSF-09080RSF-09100
DF-001
Articulated counter hinge
---
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SC
DFDHF-0020100
0
Stainless steel female piston rod (40100)Chromium-plated steel female piston rod ( 40100)
1 =2 =
Upon request
Max standard stroke0040 (16)0050 (20-25)0080 (3263)
For high temperature applications please refer to our sales o ce.
---
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CNKF-19063080CNKF-19100125CN
Univer > ()
www..com
1 Subject to change14
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast zamak ( 16 25 mm)die-cast aluminium ( 32 63 mm)
anodized aluminiumaluminium
acetalic resinchromium-plated steel, stainless steel upon request
nitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed tandem, with common piston rod (upon request)
Ambient temperatureFluidWorking pressureEnd-caps
BarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther available versions
RO 16 63 mm - UNITOP Compact cylinders octagonal tube
NON-ROTATING
CODIFICATION KEY
1
R O 2 0 3 2
5
00
3 4
0
2
2 5
6
1 Series
RO = 1663 mm UNITOP Compact cylinders octagonal tube
2 Type
Stainless steel female piston rodChromium-plated steel female piston rod
Male piston rod upon request
1 =2 =
3 Version
D.A. Standard versionD.A. Through piston rodD.A. Long piston (3263)
00 =01 =20 =
D.A. = Double acting
4 Bore (mm) 6 Option5 Stroke (mm)
= Hollow piston rod only for through piston rod versions without fl ange
H
016 = 16020 = 20025 = 25032 = 32
040 = 40050 = 50063 = 63
0005 - 0010 - 0015 - 0020 - 0025 - 0030 - 00400050 - 0060 - 0080
FIXING ELEMENTS AND ACCESSORIES
16202532405063
Rear female hinge with pin
Front/rearfl ange
Angle bracket Intermediate hinge
---
KF-10032ARPF-10040ARPF-10050ARPF-10063A
RPF-12016RPF-12020RPF-12025KF-12032
RPF-12040RPF-12050RPF-12063
RPF-13016RPF-13020RPF-13025KF-13032
RPF-13040RPF-13050RPF-13063
---
KDF-14032RPF-14040RPF-14050RPF-14063
HInge support
---
KF-41032KF-41040KF-41040KF-41063
DF sensor and DHF covering
strip
DF-001
Cable clamping for DF sensor
DFDHF-0020100
Counter hinge 90
---
KF-19032KF-19040KF-19050KF-19063
Rear male hinge
RPF-11016RPF-11020RPF-11025
----
0
Max standard stroke0040 (16)0050 (20-25)0080 (3263)
Centering adaptor ring
---
RSF-09032RSF-09040RSF-09050RSF-09063
Univer > ()
www..com
11
Cylin
ders
Subject to change 15
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast zamak (1625)die-cast aluminium (3263)
anodized aluminiumaluminium
acetalic resinchromium-plated steel, stainless steel upon request
nitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed tandem, with common piston rod (upon request)
Ambient temperatureFluidWorking pressureEnd-caps
BarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther available versions
RN 16 63 mm - ISO 21287 Compact cylinders octagonal tube
NON-ROTATING
CODIFICATION KEY
4 Bore (mm)
016 = 16020 = 20025 = 25032 = 32
6 Option
D.A. = Double acting
= Hollow piston rod only for through piston rod versions without fl ange
H
1
R
1 Series
RN = 1663 mm - ISO 21287 Compact cylinders octagonal tube
N 3 0 3 2
5
2
00
3 4
0
Type
2
Stainless steel male piston rodChromium-plated steel male piston rod
Female piston rod upon request
3 =4 =
3 Version
D.A. Standard versionD.A. Through piston rodD.A. Long piston (3263)
00 =01 =20 =
2 5
6
5 Stroke (mm)
040 = 40050 = 50063 = 63
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
16202532405063
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Rear female hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
Narrow female hinge
with pin
---
KF-10032AKF-10040AKF-10050AKF-10063A
---
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTA
---
KF-19032KF-19040KF-19050KF-19063
---
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CN
---
KF-10032ASKF-10040ASKF-10050ASKF-10063AS
Centering adaptor ring
---
RSF-09032RSF-09040RSF-09050RSF-09063
MF-15012MF-15020MF-15020KF-15032KF-15032KF-15040KF-15040
MF-17012MF-17020MF-17020KF-17032KF-17032KF-17040KF-17040
MF-22016MF-22020MF-22020KF-22032KF-22032KF-22040KF-22040
MF-23012MF-23020MF-23020KF-23032KF-23032KF-23040KF-23040
MF-24012MF-24020MF-24020KF-24032KF-24032KF-24040KF-24040
Articulated rear male
hinge
16202532405063
---
KF-11032SKF-11040SKF-11050SKF-11063S
Rear male hinge
Front/rearfl ange
Angle bracket Front/rearhinge
HInge support ISOIntermediate
hinge
Cable clamping for DF sensor
---
KF-11032KF-11040KF-11050KF-11063
---
KF-12032KF-12040KF-12050KF-12063
---
KF-13032KF-13040KF-13050KF-13063
---
KF-14032APKF-14040APKF-14050APKF-14063AP
---
KF-41032KF-41040KF-41040KF-41063
---
KDF-14032KDF-14040KDF-14050KDF-14063
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
Articulatedcounter hinge
---
KF-19032SCKF-19040SCKF-19050SCKF-19063SC
0
0005 - 0010 - 0015 - 0020 - 0025 - 0030 - 00400050 - 0060 - 0080
Max standard stroke0040 (16)0050 (20-25)0080 (3263)
Univer > ()
www..com
RS
RQ
F
RS210 32 100 mm
Version non-rotating (octagonal tube)Max load (Nm)
32405063
Nm2358
Assembly Kitavailable for all series
With anti-rotation guides 32 100 mm
STRONG Compact cylinders RS/RQ
STRONGOversized guide and piston rods
ISO 15552Interaxes, centering diameters andpiston rods complying with ISO 15552standards
No change in dimensions comparing to anequivalent cylinder without cushionings
Standard supplied for all models
Adjustable pneumaticcushioningUNIVER Original since 1999
32 63 mm
Univer > ()
www..com
11
Cylin
ders
Subject to change 17
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminium anodized aluminium
aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed tandem, with common piston rod (upon request)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther versions available
RS 32 100 mm - STRONG Compact cylinders
centering diameters, interaxes and piston rods complying with ISO 15552
CODIFICATION KEY
1
R
1 Series
4 Bore (mm) 6 Option
S 2 0 3 2
5
00
3 4
0
D.A. = Double actingS.A. = Single acting
2 Type
2
Stainless steel female piston rodChromium-plated steel femalepiston rodStainless steel male piston rod Chromium-plated steel malepiston rod
1 =2 =
3 =4 =
3 Version
D.A. Standard versionD.A. Through piston rodD.A. Non-rotating guided piston rod (3263)D.A. Non-rotating guided through piston rod (3263)D.A. Long piston (3263)S.A. Retracted piston rodS.A. Extended piston rod
00 =01 =10 =11 =
20 =60 =70 =
= Hollow piston rod only for through piston rod versions without fl ange= Preset for locking unit only for D.A. cylinders with chromium-plated steel piston rod = With fl ange for versions: 100-101-120-160-170 200-201-220-260-270
H
G
C
2 5
6
For type 1 - 2 For type 3 - 4D.A. Standard versionD.A. Through piston rodD.A. Long piston (3263)S.A. Retracted piston rodS.A. Extended piston rod
00 =01 =20 =60 =70 =
032 = 32040 = 40050 = 50063 = 63080 = 80100 = 100
RS = 32100 mm - STRONG Compact cylinders
5 Stroke (mm)
Single acting0005 - 0010 - 0015 - 0020 - 0025Double acting0005 - 0010 - 0015 - 0020 - 00250030 - 0040 - 0050 - 0060 - 0080Max standard stroke0080 (32100)
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
3240506380
100
KF-15032KF-15040KF-15050KF-15050KF-15080KF-15080
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
KF-17032KF-17040KF-17050KF-17050KF-17080KF-17080
KF-22032KF-22040KF-22050KF-22050KF-22080KF-22080
KF-23032KF-23040KF-23050KF-23050KF-23080KF-23080
KF-24032KF-24040KF-24050KF-24050KF-24080KF-24080
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100A
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTA
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
Centering adaptor ring
RSF-09032RSF-09040RSF-09050RSF-09063RSF-09080RSF-09100
Articulated rear male
hinge
3240506380
100
KF-11032SKF-11040SKF-11050SKF-11063SKF-11080SKF-11100S
Rear male hinge
Front/rearfl ange
Angle bracket Front/rearhinge with fl oating pin
Hinge support ISOIntermediate
hinge
Cable clamping for DF sensor
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100AP
KF-41032KF-41040KF-41040
KF-41063080KF-41063080KF-41100125
KDF-14032RPF-14040RPF-14050RPF-14063KDF-14080KDF-14100
Narrow female hinge
with pin
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100AS
DF sensor and DHF covering
strip
DF-001
Articulated counter hinge
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SC
Flange for female piston rod
RPF-28032RPF-28040RPF-28050RPF-28063
--
DFDHF-0020100
0
For high temperature applications please refer to our sales o ce
Version with extended piston (upon request)0800 (32-40) 1000 (50100)Max stroke with non-rotating guided piston rod (upon request)0400 (32-40)0500 (50)
0800 (63)1000 (80-100)
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CNKF-19063080CNKF-19100125CN
Univer > ()
www..com
1 Subject to change18
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminium anodized aluminium
aluminiumacetalic resin
chromium-plated steel, stainless steel upon requestnitrile rubberacetalic resinnitrile rubber
pneumatic adjustable (UNIVER original standard supplied)standard supplied
tandem, two-position tandem, opposed tandem, with common piston rod (upon request)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodShock absorber sealsCushioningsMagnetOther available versions
RQ 32 63 mm - STRONG Compact cylinders octagonal tube
centering diameters, interaxes and piston rods complying with ISO 15552 NON-ROTATING
CODIFICATION KEY
1
R
1 Series
6 Option
Q 2 0 3 2
5
00
3 4
0
2 Type
2
3 Version
2 5
6
Stainless steel female piston rod with fl angeChromium-plated steel female piston rod with fl angeStainless steel male piston rodChromium-plated steel male piston rod
1 =2 =3 =4 =
4 Bore (mm)
032 = 32040 = 40050 = 50063 = 63
RQ = 3263 mm - STRONG Compact cylinders octagonal tube
D.A. = Double acting
D.A. Standard versionD.A. Through piston rodD.A. Long piston
00 =01 =20 =
5 Stroke (mm)
Double acting0005 - 0010 - 0015 - 0020 - 00250030 - 0040 - 0050 - 0060 - 0080
Max standard stroke0080
= Hollow piston rod only for through piston rod versions without fl ange= Preset for for locking unit only with chromium-plated steel piston rod
H
G
Version with long piston (upon request)0400 (32-40)1000 (50-63)
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
32405063
KF-15032KF-15040KF-15050KF-15050
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Female rear hinge with pin
Counter hinge 90 (CETOP)
Counter hinge 90
Counter hinge 90 (CNOMO)
KF-17032KF-17040KF-17050KF-17050
KF-22032KF-22040KF-22050KF-22050
KF-23032KF-23040KF-23050KF-23050
KF-24032KF-24040KF-24050KF-24050
KF-10032AKF-10040AKF-10050AKF-10063A
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTA
KF-19032KF-19040KF-19050KF-19063
KF-19032CNKF-19040050CNKF-19040050CNKF-19063080CN
Centering adaptor ring
RSF-09032RSF-09040RSF-09050RSF-09063
Articulated rear male
hinge
32405063
KF-11032SKF-11040SKF-11050SKF-11063S
Rear male hinge
Front, rearfl ange
Angle bracket Front / rearhinge
Hinge support ISOIntermediate
hinge
Cable clamping for DF sensor
KF-11032KF-11040KF-11050KF-11063
KF-12032KF-12040KF-12050KF-12063
KF-13032KF-13040KF-13050KF-13063
KF-14032APKF-14040APKF-14050APKF-14063AP
KF-41032KF-41040KF-41040
KF-41063080
KDF-14032RPF-14040RPF-14050RPF-14063
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
Articulated counter hinge
KF-19032SCKF-19040SCKF-19050SCKF-19063SC
Narrow female hinge
with pin
KF-10032ASKF-10040ASKF-10050ASKF-10063AS
0
Univer > ()
www..com
OV
F
18 80 mm
Max applicable torque (Nm) and respective Max rotation
18253240506380
F (Nm)0,801,001,401,702,002,302,60
Degrees0,900,800,600,400,350,300,30
Suitable for heavy loads (F)
Piston rod rotation highly reduced
Oversized piston guide and UNIVERorginal seal
2
Adjustable pneumatic cushioning1
Standard supplied
No variation in dimensions comparing to an equivalent cylinder without cushioning
COMPACTUp to 40% width reductioncompared to standard cylinders
ANTI-ROTATIONPiston rod Max rotation from 0,3 to 0,9
CUSHIONINGStandard supplied 18 80 mm(pneumatic adjustable cushionings)
18 25 32 40 50 63
Comparison of A dimension: OV cylinder vs ISO standard cylinder
18253240506380
Di erence-42%-35%-45%-30%-40%-35%-38%
80
A (ISO)46,552
64,576,595
114140
A (OV)1620
24,538405060
Oval Cylinders OV
A (OV)
A (ISO 6432)
A (OV)
A (ISO 15552)
2 1
Univer > ()
www..com
1 Subject to change20
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
anodized aluminiumanodized aluminium
aluminiumtechnopolymer
stainless steel (18-25), chromium-plated steel (3280)nitrile rubber
standard suppliedpolyurethane
pneumatic adjustable (standard supplied)standard supplied
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodPiston rod scraper sealsCushioningsMagnet
OV 18 80 mm - Oval cylinders
CODIFICATION KEY
1
O V
2
1 Series
4 Bore (mm)
018 = 18025 = 25032 = 32040 = 40
2 Type
00 = D.A. Standard version01 = D.A. Through piston rod02 = D.A. Hollow through piston rod
3 Version
OV = 1880 mm - Oval cylinders 1 = Stainless steel female piston rod (1880)2 = Chromium-plated steel female piston rod (3280)3 = Stainless steel male piston rod (1880)4 = Chromium-plated steel male piston rod (3280)
5 Stroke (mm)
0010 - 0025 - 0040 - 0050 - 0080 - 0100 - 0125 - 0160 - 0200 (18-25)0010 - 0025 - 0040 - 0050 - 0080 - 0100 - 0125 - 0160 - 0200 - 0250 - 0320 ( 3280)
2 0 0 0 3 2 0 0 5 0
4 53
050 = 50063 = 63080 = 80
D.A. = Double acting
FIXING ELEMENTS AND ACCESSORIES
Female fork
with clips
18253240506380
KF-15020KF-15032KF-15032KF-15040KF-15050KF-15050KF-15050
Articulated self-lubricating
fork
Fork with axially mounted
articulated pin
Fork with angle mounted
articulated pin
Floating joint Male hinge FlangeAngle bracket Cable clamping for DF sensor
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
KF-17020KF-17032KF-17032KF-17040KF-17050KF-17050KF-17050
KF-22020KF-22032KF-22032KF-22040KF-22050KF-22050KF-22050
KF-23020KF-23032KF-23032KF-23040KF-23050KF-23050KF-23050
KF-24020KF-24032KF-24032KF-24040KF-24050KF-24050KF-24050
OVF-13018OVF-13025OVF-13032OVF-13040OVF-13050OVF-13063OVF-13080
OVF-11018OVF-11025OVF-11032OVF-11040OVF-11050OVF-11063OVF-11080
OVF-12018OVF-12025OVF-12032OVF-12040OVF-12050OVF-12063OVF-12080
18
25
32
40
50
63
80
bar
5498
161251393623
1005
Working pressure
Thrust
108196322502785
12462010
162295483754
117818703015
216393643
1005157024934019
270491804
1256196331165024
barWorking pressure
Traction
4182
138221330560942
82165276422660
11201884
122247415633990
16822826
163330553844
132022403770
204412691
1055165028004711
2 4 6 8 10 2 4 6 8 10
Cushioning length
8101014
Front 11/Back 14Front 11/Back 14Front 20/Back 27
Theoretical forces (N) developed at working pressure (bar)
Univer > ()
www..com
11
Cylin
ders
Subject to change 21
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
aluminiumaluminiumaluminium
technopolymerstainless steelnitrile rubber
standard suppliedpolyurethane
nitrile rubber (standard supplied)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston rodPiston sealGuide bush for piston rodPiston rod scraper sealShock absorbers seals
W 12 100 mm - Short stroke cylinders
TUBE NEW DESIGN
CODIFICATION KEY
1
W 1
2
0 0 0 3 2 0 0 5 0
4 5 63
1 Series
4 Bore (mm)
012 = 12016 = 16020 = 20025 = 25032 = 32
3 Version
7
M = Magnetic version (except for 12)
Magnetic
W = 12100 mm Short stroke cylinders
5 Stroke (mm)
2 Type
00 = D.A. Standard version01 = D.A. Through piston rod10 = D.A. Non-rotating piston rod (except for 12)11 = D.A. Non-rotating through piston rod (except for 12)31 = D.A. Hollow through piston rod (except for 12-16)60 = S.A. Retracted piston rod70 = S.A. Extended piston rod
040 = 40050 = 50063 = 63080 = 80100 = 100
D.A. = Double acting S.A. = Single acting
FIXING ELEMENTS AND ACCESSORIES
Nipple
121620253240506380
100
WF-50012WF-50012WF-50020WF-50020WF-50032WF-50040WF-50050WF-50063WF-50080WF-50080
Cable clamping for DF sensor
DF sensor and DHF covering
strip
DF-001
DH sensor
DHDF
DHF-0020100
1 = Stainless steel piston rod7 = Stainless steel piston rod with male rear hinge, versions 60 and 70 (except for bore 12)
New tube Traditional tube
Groove for DF series recessed sensor
Groove for DH series traditional sensor
DF
DH DH2
1
12
2
1
21
1
2
1
11
25-32 mm 40 mm 50-63-80-100 mm 16-20 mm 12 mm
7
Single acting0005 - 0010 (1225)0005 - 0010 - 0025 (32100)Double acting0005 - 0010 - 0020 - 00250030 - 0040 - 0050 (12-16)0005 - 0010 - 0020 - 00250030 - 0040 - 0050 - 0075 (20100)
6
S = Safety distance (only for versions 10 and 11)
Option
Univer > ()
www..com
1 Subject to change22
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication1,5 10 bar
aluminiumaluminium
die-cast aluminiumacetalic resin
stainless steelnitrile rubbernitrided steelnitrile rubber
pneumatic adjustable (standard supplied)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slideRackPiston sealPinionShock absorber sealsCushionings
R 32 125 mm - Pneumatic rotary actuators
CODIFICATION KEY
1
R 1
2
0 3 2 1 8 0
3 4 5
1 Series 5
M = Magnetic version
Magnetic
R = 32125 mm Pneumatic rotary actuators
2 Angle of rotation
090 = 90180 = 180270 = 270360 = 360
Type
11 = Male pinion without adjustment (degree of accuracy 3)12 = Male pinion with adjustment 513 = Female pinion without adjustment (degree of accuracy 3)14 = Female pinion with adjustment 5
1
032 = 32040 = 40050 = 50063 = 63080 = 80100 = 100125 = 125
3 Bore (mm)
ACCESSORIES
4
3240506380
100125
Cable clamping for DF sensor
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
1
2
7
4
5
6
8
910
11
13
14
12
Cylinder barrel: extruded profi le in aluminium alloy
Die-cast end-caps in aluminium alloy
Pneumatic adjustable cushionings
Shock absorber seals
Die-cast piston in aluminium alloy and acetalicresin guide slide
Piston seals in nitrilic rubber compound
Standards-based steel square rack
1.
2.
3.
4.
5.
6.
7.
Guide slide for rack with self-adjusting backlash recovery
Nitrided steel pinion
Ball bearings for pinion support
Anodized aluminium central body
Adjustment screws: angle of rotation 2,5
DF series magnetic sensor
Screws for backlash recovery
8.
9.
10.
11.
12.
13.
14.
Univer > ()
www..com
11
1
Cylin
ders
Subject to change 23
CHARACTERISTICS-20 80 C
fi ltered air, with or without lubrication, neutral gases3 8 bar (single acting) 2 8 bar (double acting)
NAMUR interface (G1/4)0-903 (external adjustment)
10 bardie-cast aluminiumdie-cast aluminium
acetalic resinnitrile rubber
hard anodized aluminium extrusionnickel-plated steel
stainless steel
Ambient temperatureFluidWorking pressureConnectionsRotationMax pressureEnd-capsPistonGuide slideSealsBodyPinionScrews and nuts
YR2Rotary actuators for process automation
CODIFICATION KEY
Series
YR2 = Rotary actuators for process automation
Size (mm)
00 = 32 (DA0 only)01 = 50 2A = 63 (F04)2B = 63 (F05)03 = 75 35 = 85 04 = 100
Version1 2 3
1 3
0 1 D A 0
2
Y 2
45 = 11505 = 12555 = 14506 = 16008 = 20010 = 250
R
YR200DA0YR201DA0YR22ADA0-YR22BDA0YR203DA0YR235DA0YR204DA0YR245DA0YR205DA0YR255DA0YR206DA0YR208DA0YR210DA0
Part No.
7,211,4243956
101,6130173260520
1254
YR201S12YR22AS12-YR22BS12YR203S12YR235S12YR204S12YR245S12YR205S12YR255S12YR206S12YR208S12YR210S12
10,516,8366487
159,6203303429796
1909
Part No.
0 90
Torque - double acting version (P = 6 bar) Torque - single acting version (P = 6 bar)
DA0 = Double actingS12 = Single acting - 12 springs standard (diff erent number of springs upon request)
YR series ball valve AC-N series NAMUR distributors AC-N series valves with actuator
Torque (Nm) Torque (Nm)
7,317,728,260
102142
261,6333473680
12763234
Connections: bottom hole for ball valve installation in compliance with ISO 5211/DIN 3337 standards. Solenoid valve interface, shaft top-end and top hole for accessory fi xing in compliance withVDI/VDE 3845 NAMUR standards.
Univer > ()
www..com
1NEW
Subject to change24
DF-T
* = Theoretical torque at 5 bar
YR3
Ambient temperature: 0 50 CWorking pressure: 1,5 7 barRotation angle: 0 180Option: with shock absorbers (upon request)
0,0060,0250,0480,0800,240,32
1,52,23,25,57,59,8
Part. No
YR3010YR3020YR3030YR3050 YR3070YR3100
151820252832
SensorTorque
(Nm)Kinetic energy
(J)
- YR3Double rack rotary table
*
For version with hydraulic shock absorbers, add suffi x D to part no.
Examples of CYLINDER - VALVE assembly
RV - STRONG cylinder with integrated VDMA valveSTRONG cylinder with integrated 5/2-5/3 VDMA solenoid valve,side 18 or 26 mm.Supply and exhaust occur directly from the connection plate between valve and cylinder and exhausts are adjustable. Electrical connection M12 can be operated also from a PLC.
RW - Telescopic cylinder with integrated VDMA valveTelescopic cylinder with integrated 5/2-5/3 VDMA solenoid valve,side 18 or 26 mm.Supply and exhaust occur directly from the connection plate between valve and cylinder and exhausts are adjustable. Electrical connection M12 can be operated also from a PLC.
KD series ISO 15552 Cylinder with integrated valveValve mounting by means of a proper plate embedded in one of tube sensor grooves
RS series STRONG Cylinder with integrated valveValve mounting by means of a proper plate embedded in one of tube sensor grooves
DF-003 (M3)DF-004 (M4)
Plate for mounting valve on sensor groove
Univer > ()
www..com
S1
VL1
S5
Assembly Kitavailable for all series
16 50 mm - Standard version
25 50 mm - Version with integrated guidesTechnopolymer sliding guide
25 50 mm - Version with 90 integrated guides Sliding on ball bearings
UNIVER Original since 1988
A - B -
Internal strip (seal)External strip (protection) madeof reinforced elastomer withKevlar fi ber
B
A
Rodless cylindersS1-S5-VL1
Univer > ()
www..com
1-
Subject to change26
CHARACTERISTICS-20 80 C
lubricated fi ltered air (without lubrication up to 500 mm stroke)3 10 bar
die-cast light alloyanodized aluminium
aluminiumacetalic resinnitrile rubber
mechanicalpneumatic adjustable (standard supplied)
upon request
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston sealShock absorber sealsCushioningsMagnet
S1 16 50 mm - Rodless cylinders standard version
CODIFICATION KEY
1
S 1
1 Series
S1 = 1650 mm - Rodless cylinders standard version
6 Stroke (mm)
2
0 2 5 0 8 5
5 6
5 Bore (mm) 7 Magnetic
3
1
4
1 0
7
FIXING ELEMENTS AND ACCESSORIES
Bracket for
16
1625324050
SF-13016----
Angle bracket for 25 50
Fixing plate Oscillating bracket
Female threaded
connection
Female connection
without thread
DH sensor Bracket for DH sensor
-SF-13025SF-13032SF-13040SF-13050
SF-12016SF-12025SF-12032SF-12040SF-12050
SF-24016SF-24025SF-24032SF-24032
-
SF-26016SF-26025SF-26032SF-26032
-
SF-28016SF-28025SF-28032SF-28032
-
Male threaded pin
SF-27016SF-27025SF-27032SF-27032
-
Cable clampingfor DF sensor
DF sensor and DHF covering
strip
DH
DF-001----
----
DF
- Extruded aluminium profi le 16 50 mm- Stroke up to 6 m- Diff erent supply port confi gurations available- Diff erent carriage types- High translation speed 1 3 m/s
S1
-DH-S025DH-S032DH-S040DH-S050
Up to 5000 ( 16) Up to 6000 ( 2550)
16 = 1825 = 2532 = 3240 = 4050 = 50
2 Carriage type
0 = No supply port (both chambers are supplied from the right end-cap)1 = Side supply port (except for 16)2 = Bottom supply port (except for 16)3 = Rear supply port (except for 16)
3 Left end-cap supply port
0 = Standard carriage2 = Medium carriage (except for 16)3 = Long carriage (except for 16)
1 = Side supply port (except for 16)2 = Bottom supply port (except for 16)3 = Rear supply port (except for 16)4 = Rear supply ports for both chambers on the right end-cap5 = Side supply ports for both chambers on the right end-cap (only for 16)
4 Right end-cap supply port
M = Magnetic version standard supplied ( 16) upon request ( 2550)
Univer > ()
www..com
11
Cylin
ders
Subject to change 27
CHARACTERISTICS-20 80 C
lubricated fi ltered air, (without lubrication up to 500 mm stroke)3 10 bar
die-cast light alloyanodized aluminium
aluminiumacetalic resinnitrile rubber
mechanicalpneumatic adjustable (standard supplied)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston sealShock absorber sealsCushionings
S5 25 50 mm - Rodless cylinders with integrated guides
Technopolymer sliding guide
CODIFICATION KEY
1
S 5
1 Series 2 Carriage type
0 = No supply port (both chambers are supplied from the right end-cap)1 = Side supply port2 = Bottom supply port3 = Rear supply port
3 Left end-cap supply port
S5 = 2550 mm - Rodless Cylinders with integrated guides Technopolymer sliding guide
0 = Standard carriage (except 40-50)2 = Medium carriage3 = Long carriage
6 Stroke (mm)
Up to 6000
2
0 2 5 0 8
5 6
1 = SIde supply port2 = Bottom supply port3 = Rear supply port4 = Rear supply ports for both chambers on the right end-cap
4 Right end-cap supply port 5 Bore (mm)
3
1
4
1 5 0
Angle bracket
25324050
SF-13025SF-13032SF-13040SF-13050
Fixing plate
SF-12025SF-12032SF-12040SF-12050
FIXING ELEMENTS
- Extruded aluminium profi le 25 50 mm- Stroke up to 6 m- Flexible guide system- Sliding of the carriage with plastic slide on steel shafts- Translation speed 0,2 1,5 m/sec.- Version with locking unit available
S5 with L6 locking unit
S5
25 = 2532 = 3240 = 4050 = 50
Univer > ()
www..com
1 Subject to change28
CHARACTERISTICS-20 80 C
lubricated fi ltered air (without lubrication up to 500 mm stroke)3 10 bar
die-cast light alloyanodized aluminium
aluminiumacetalic resinnitrile rubber
mechanicalpneumatic adjustable (standard supplied)
Ambient temperatureFluidWorking pressure
End-capsBarrelPistonGuide slidePiston sealsShock absorber sealsCushionings
VL1 25 50 mm - Rodless Cylinders with 90 integrated guides
Sliding on ball bearings
CODIFICATION KEY
1
V L
1 Series 2 Carriage type 3 No. of ball bearing pairs standard supplied
VL1 = 2550 mm - Rodless cylinders with 90 integrated guides Sliding on ball bearings
0 = Medium carriage2 = Long carriage
6 Bore (mm)
1 1 1 3 2 8 5
5
4 Left end-cap supply port
0 = No supply port (both chambers are supplied from the right end-cap)1 = Side supply port2 = Bottom supply port3 = Rear supply port
7
5
2
2
3
2 0
4 6
0
Right end-cap supply port 7 Stroke (mm)
25 = 2532 = 3240 = 4050 = 50
1 = Side supply port2 = Bottom supply port3 = Rear supply port4 = Rear supply ports for both chambers on the right end-cap
Up to 6000
Angle bracket
25324050
SF-13025SF-13032SF-13040SF-13050
Fixingplate
SF-12025SF-12032SF-12040SF-12050
FIXING ELEMENTS
- Extruded aluminium profi le 25 50 mm- Stroke up to 6 m- Heavy duty precision series- Rigid guide system- Sliding of the carriage on ball bearings- Translation speed 0,2 2 m/sec.- Version with locking unit available
VL1 with L6 locking unit
VL1
Medium carriage2 = 2540 3 = 50
Long carriage3 = 2540 4 = 50
Univer > ()
www..com
J64RT2
J1
J3
J64RS
Assembly Kitavailable for all series
Telescopic cylinders
RS
RT2
S1
ISO 15552 cylinders
M
K/KD
ISO 6432 cylinders
Rodless cylinders
STRONG cylinders
STRONGExtruded aluminium profi le structureUNIVER Original
STURDYOversized hollow guiding shaftsmade of chromium-plated steel
SMOOTH SLIDINGSelf-lubricating guiding bushesmade of special steel
STANDARDWide range of standard solutionsfor any application requirement
Slide UnitsJ
Univer > ()
www..com
1 Subject to change30
CHARACTERISTICS
JSlide units for pneumatic cylinders
CODIFICATION KEY
1
J 1
2
0 A 5 5 0 0 5
63
1 Series
A = Shaft scrapers standard supplied
3 Accessories
J = Slide unit
2 Type
10 = Protruding shafts and short housing (recommended for strokes up to 50 mm)11 = Protruding shafts and medium housing12 = Protruding shafts and long housing14 = Fully protected cylinder16 = Central mounting (semi-external cylinder)17 = Central mounting (fully protected cylinder)18 = Medium moving housing (external cylinder)19 = Long moving housing (external cylinder)
4 5
0
7
4 Slide unit size
0 = 16 for 16 cylinder2 = 25 for 25 cylinder3 = 32 for 32 cylinder4 = 40 for 40 cylinder5 = 50 for 50 cylinder6 = 63 for 63 cylinder7 = 80 for 80 cylinder8 = 100 for 100 cylinder
7 Cylinder option6 Cylinder stroke (mm)
M0025 - 0030 - 0040 - 0050 - 00750100 - 0125 - 0150 - 0160 - 01750200 - 0250 - 0300 - 0400 - 0500
KD - KE/K0025 - 0050 - 0075 - 0080 - 01000125 - 0150 - 0160 - 0175 - 02000250 - 0300 - 0320 - 0400 - 04500500 - 0600 - 0700 - 0800 - 09001000
5 Cylinder bore (mm)
0 = 162 = 253 = 324 = 405 = 506 = 637 = 808 = 100
-20 80 Cfi ltered air, with or without lubrication
2 10 bar
extruded anodised aluminium special steel
chromium-plated steelpolyurethane
steel
Ambient temperatureFluidWorking pressure
BarrelGuide bush for piston rodShaftsShaft scraper sealsFlange
J1
Slide Units for M, KE/K, KD series cylinders
Slide units are supplied with integrated cylinder
= M150 series 1625 microcylinders K200 series 32100 cylinders= M250 series 1625 microcylinders with locking unit K200 series 32100 cylinders with locking unit (only for J12, J14, J16, J17)= KE200 series 32100 cylinders= KE200 series 32100 cylinders with locking unit (only for J12, J14, J16, J17)= KD200 series 32100 cylinders (except for J14 and J17)= KD200 series 32100 cylinders with locking unit (only for J12 and J16)
A
B
CD
E
F
A
Univer > ()
www..com
UNIVER GROUP
1
1
Cylin
ders
Subject to change 31
CODIFICATION KEY
1
J 3
2
0 A 5 3 0 1 0
63
1 Series
A = Shaft scrapers standard supplied
3 Accessories
J = Slide unit
2 Type
30 = With fully protected cylinder (2 bearings - standard carriage)31 = With fully protected cylinder (2 bearings - long carriage)
4 5
0
7
A
4 Slide unit size
4 = 40 for 25 cylinders5 = 50 for 32 cylinders6 = 63 for 40 cylinders7 = 80 for 50 cylinders
7
A = Supply ports on both end-capsB = Supply ports on the right end-cap only
Supply port option6 Slide unit stroke (mm)
Up to 0800
5 Cylinder bore (mm)
2 = 253 = 324 = 405 = 50
CODIFICATION KEY
1
J 6
2
4 R S 3 3 0 0
64
5 0
3 5
B
7
1 Series
J = Slide unit - Shaft scrapers standard supplied
2
4 Slide unit size
3 = 32 for 32 cylinders4 = 40 for 40 cylinders5 = 50 for 50 cylinders6 = 63 for 63 cylinders
5 76 Slide unit stroke (mm)
A = Cylinder with long pistonB = Cylinder with long piston and locking unit
Cylinder optionCylinder bore (mm)
3 = 324 = 405 = 506 = 63
3 Cylinder type
RS = STRONG cylinder (RS22J... series) with long piston and tube with sensor grooves on the same side as supply ports to allow mounting of magnetic sensors
Slide unit type
64 = Fully protected cylinder (stroke longer than 50 mm)65 = Fully protected cylinder, through opening66 = Fully protected cylinder, through opening, two plates67 = Fully protected cylinder, two plates (stroke longer than 50 mm)
J Slide units for pneumatic cylinders
Slide units for S1 series rodless cylinders
J3
J64RS
Slide Units for RS series STRONG compact cylinders
Slide units are supplied with integrated cylinder
0015 0800
Univer > ()
www..com
1UNIVER GROUP
Subject to change32
CODIFICATION KEY
1
R4
2
6J 42
A = 2 stage telescopic cylinders
T
6 7
A080
5
RT2 = 2 stage telescopic cylinders
0
4
1 Series
Slide unit size
3 = 32 for 32 cylinders4 = 40 for 40 cylinders5 = 50 for 50 cylinders6 = 63 for 63 cylinders
Cylinder bore (mm)
Slide unit type
64 = Fully protected telescopic cylinder
3
3 = 324 = 405 = 506 = 63
4
75
2
Cylinder option
3
6 Slide unit stroke (mm)
Cylinder type
J = Slide unit - Shaft scrapers standard supplied
4
CODIFICATION KEY
1
J 6
2
5 R P 2 2 0 0
64
5 0
3 5
A
7
1 Series 2
4 Slide unit size
2 = 25 for 25 cylinders
5 76 Slide unit stroke (mm)
0050 0200 A = Cylinder with long piston
Cylinder optionCylinder bore (mm)
2 = 25
3 Cylinder type
RP = UNITOP 25 mm compact cylinder
Slide unit type
65 = Fully protected cylinder, through openingJ = Slide units - Shaft scrapers standard supplied
J Slide units for pneumatic cylinders
Slide Units for RT2 series telescopic cylinders
J64RT2
Slide Units for RP series compact cylinders
J65
Slide units are supplied with integrated cylinder
Standard stroke0120 - 0160 - 0180 - 0200 - 0300 - 0400 - 05000600 - 0700 - 0800 - 0900 - 1000 - 1100 - 1200
Min - Max stroke0160 0400 (32)0160 0600 (40)0120 0900 (50)0120 1200 (63)
Univer > ()
www..com
11
1
3
4
Cylin
ders
Subject to change 33
CHARACTERISTICS-5 +60 C
fi ltered air, with or without lubrication1 10 bar
aluminium alloychromium-plated steel (JLS)
hardened and chromium-plated steel (JLV)aluminium alloy
chromium-plated stainless steel AISI 303 (12-16-20) chromium-plated steel C45 (25-32-40-50-63)
bearings (JLS) ball bushing (JLV)
NBRNBR
standard suppliedsteel
Ambient temperature FluidWorking pressureBodyShafts
Piston Piston rod
Guide bearing
Piston sealCushion sealsMagnetFlange
JLGuided compact cylinders
CODIFICATION KEY
1 2 3 4
1
Strokes (mm)
Series
JL = Guided Compact Cylinders
Guide bearing2
S = BearingsV = Ball bushing
Bore (mm)
012 = 12016 = 16020 = 20025 = 25
032 = 32040 = 40050 = 50063 = 63
3
Stroke (mm)4
J L S 0 1 2 0 0 3 0
175150125100755040302520 200
1216202532405063
10
Top fi xing Bottom fi xing Rear fi xing T-slot fi xing
Fixing schemes
Mounting scheme
DF-R magnetic sensor Upon request
Version with metallic piston rod scraper
Brown (+)
Black (Out)
Blue (-)
DF-R200M08DF-R200L03
0010 = 100020 = 200025 = 250030 = 300040 = 400050 = 50
0075 = 750100 = 1000125 = 1250150 = 1500175 = 1750200 = 200
Univer > ()
www..com
1 Subject to change34
JT
JX1
JX2
Ambient temperature: -5 60 CStroke adjustment: 0 5 mm
Ambient temperature: -5 60 CEmbodied linear guide
* = Theoretical thrust force at 5 bar
Thrust
Part No.Theoretical thrust force (N)*
Traction
Workingpressure
(bar)
Standardstroke (mm)
SensorMax
stroke (mm)
10,63386
132
14,239,3101157
Thrust
Part No.Theoretical thrust force (N)*
Traction
JX1006JX1010JX1016JX1020
6101620
Workingpressure
(bar)Sensor
1,2 - 70,6 -70,6 -70,5 - 7
DF-R200
3885
151236380
51113201314491
Thrust
Theoretical thrust force (N)*
TractionSensor
DF-T200
Standardstroke (mm)
10-20-30 - 40-50-75
10-20-3040-50-75 -100
6 32 mm - Twin rod guided cylinder
6 20 mm - Pneumatic mini slide unit
8 25 mm - Slide table actuator
JTS006JTV006JTS012JTV012JTS016JTV016JTS020JTV020JTS025JTV025JTS032JTV032
6
12
16
20
25
32
10-20-30
10-15-20-25-3035-40-45-50-60-70
10-15-20-2530-35-40-4550-60-70-7580-90-100
DF-R200
1,5 - 7
1 - 7
1 - 7
0,5 - 7
0,5 - 7
0,5 - 7
28
113
200
314
490
802
15,5
84
150
236
378
603
50
70
120
130
150
150
Standardstroke (mm)
5-10-15-20-2530-40-50-60
* = Theoretical thrust force at 5 bar
Part No.
JX2008JX2012JX2016JX2020JX2025
812162025
Workingpressure
(bar)
1,5 7
* = Theoretical thrust force at 5 bar
Ambient temperature: 0 60 CVersions upon request:with stroke adjusting screw (add suffi x R to part no. e.g. JX2008R)with hydraulic shock absorbers (add suffi x D to part no. e.g. JX2008D)
S = BearingsV = Ball bushing
NEW - JT/JX1/JX2Guided slides
Univer > ()
www..com
11
Cylin
ders
Subject to change 35
Special strokes upon request
Self-compensating
YDA
Ambient temperature: -10 80 CBody: steelPiston rod: chromium-plated carbon steelPiston: carbon steel
Adjustable
YDR
Special strokes upon request
Ambient temperature: -10 80 CBody: steelPiston rod: chromium-plated carbon steelPiston: carbon steel
Part No. Stroke(mm) ThreadMax energy
per cycle (Nm))
Max energyper hour
(Nm)
Max e ective
mass (Kg)
Max impactspeed(m/s)
YDA0806YDA1007YDA1210YDA1412YDA2015YDA2525YDA2725
M8 x 1M10 x 1M12 x 1
M14 x 1,5M20 x 1,5M25 x 1,5M27 x 1,5
67
1012152525
36
12205980
147
7000124002250033000380006000072000
6122240
120180270
0,3-2,50,3-3,50,3-40,3-50,3-50,3-50,3-5
Part No. Stroke(mm ThreadMax energy
per cycle (Nm)
Max energyper hour
(Nm)
Max e ective
mass (Kg)
Max impactspeed(m/s)
YDR1415YDR2025YDR2525YDR2540YDR3625YDR3650
M14 x 1,5M20 x 1,5M25 x 1,5M25 x 1,5M36 x 1,5M36 x 1,5
152525402550
223985402550
2640030000540008000081000
100000
80312400700
14001400
33,53,53,53,53,5
Stop collar
YDG08YDG10YDG12YDG14YDG20YDG25YDG27
Stop collars
YDG14YDG20YDG25
YDG25LYDG36YDG36
NEW - YDA/YDRHydraulic shock absorbers
Univer > ()
www..com
L1-N
M
RS
KLKE/KKD
ORIGINALLocking system UNIVER Original since 1998
STATIC/DYNAMICStatic locking and dynamic braking in asingle device
POWERFULThe highest locking force among marketequivalent devices
SAFENo rod slipping even if aff ected by oiland grease
For cylinders 16 125 mmFor piston rods 6 32 mm
min 4 bar
Locked piston rod Free piston rod
Working principle
Locking Units L1-N Univer > ()
www..com
22
37
High-Tech
High-Tech
Subject to change
CHARACTERISTICS-20 30 C
fi ltered air, with or without lubrication 4 10 bar
die-cast aluminiumdie-cast aluminium
aluminiumnitrile rubber
special steel
Ambient temperatureFluidWorking pressure
BodyCoverPistonSealsSprings
M, KL, KE/K, KD, RS series cylinders
L1-N Locking unit for cylinders and piston rod
CODIFICATION KEY
1
L
1 Series
L1-N = Locking unit for cylinders and piston rod
1 - N 2 0
2
0 6 3
2 Cylinder bore (mm)
3
3 Piston rod bore (mm)
4
4 Option
K = Metallic piston rod scraper upon request
016 = 16020 = 20025 = 25032 = 32040 = 40
06 = 608 = 810 = 1012 = 12
050 = 50063 = 63080 = 80100 = 100125 = 125
16 = 1620 = 2025 = 2532 = 32
Core features and performance
1620253240506380
100125
Static locking force
Pressure on the equivalent
cylinder
Dynamic braking force
Response timeat 6 bar
Stopping point repeatability
Vibration resistance
Shock resistance
Minimumrelease pressure
200314490800
12602000310050007850
12300
N bar at 1m/s ms J bar
10
40% of the static locking
force
12121520202525303040
< 1 mm at 1 m/s10 g (10-55 Hz)for 30 minutes
on each axis
23458
1115212940
4
68
1012162020252532
NFZ 160/200ISO 15552 cylinders with integrated locking unit
Locking unit with optical positional device
rod(mm)
Univer > ()
www..com
2 38 Subject to change
CHARACTERISTICS-20 +80 C
fi ltered air, with or without lubrication4,510 bar
die-cast aluminiumnitrile rubber
brass/aluminium
Ambient temperatureFluidWorking pressure
BodySealsInternal parts
L6Locking units for rodless cylinders S5 - VL1
CODIFICATION KEY
1
L
1 Series
L6-S5 = Locking units for rodless cylinder S5 seriesL6-V1 = Locking units for rodless cylinder VL1 series
6 - S 2
2
5 0 3
Cylinder bore (mm)
025 = 25032 = 32040 = 40050 = 50
2
VL1 series with locking unit
S5 series with locking unit
Min. release pressure: 4,5 bar
Able to keep the carriage in position in both directions
Easy to be mounted on both sides of the carriage
Permanent manual release by means of 2 screws M5
Locking performed by mechanical springs in absence of air
Preset for additional pneumatic override to increase locking force
-
-
-
-
-
-
UNIVER Locking Units for rodless cylinders perform the function of keeping the carriage in any intended point of its stroke and allow high locking accuracy. They can be mounted on both sides of the carriage and the mechanical braking force can be further increased by means of an additional pneumatic override.
Univer > ()
www..com
RT2
RT3
2 stages 25 63 mm
3 stages 40 63 mm
Octagonal
Octagonal
A
ISO 15552
UNITOP
RT2
RT3
ORIGINALUNIVER Original design and technology
INDUSTRIALIZEDIndustrialized components andadvanced technology
REDUCED DIMENSIONS60% less than standard cylinders
NON-ROTATINGAnti-rotation octagonal tubestandard supplied
-50%
-60%
-20%
Telescopic cylindersRT
Comparison of overall dimensions
stroke 300 mm (A)
Univer > ()
www..com
2 40 Subject to change
CHARACTERISTICS-20 +80 C
fi ltered air, with or without lubrication1,5 10 bar
die-cast aluminiuminternally/externally anodized aluminium
aluminiumacetalic resin
non-rotating, chromium-plated steel, with fl ange (female piston rod)stainless steel upon request
nitrile rubberacetalic resinnitrile rubber
standard supplied (stage 1)
RT 25 63 mm - 2/3 stage Telescopic pneumatic cylinders
CODIFICATION KEY
Ambient temperatureFluidWorking pressureEnd-capsBarrelPistonGuide slidePiston rod
Piston sealsGuide bush for piston rodShock absorber sealsMagnet
1
R
1 Series
5 Bore (mm) 7 Option
RT = 2563 mm - 2/3 Stage Telescopic pneumatic cylinders (with non-rotating piston rod and elastic shock absorber seals)
T 2 2 2 0 6 0
7
00 0 3
4 6
D.A. = Double acting
6 Stroke (mm)
2 Rod
Stainless steel piston rodChromium-plated steelpiston rod
1 =2 =
= Without fl ange (only for female piston rod)= Freely rotating piston rod= With telescopic magnetic shaft (stage 2-3) except for 25, only for female piston rod
ILM
2
4 Type
D. A. Female piston rod with fl angeD. A. Male piston rod
0 =3 =
3 Stages
2 stages3 stages
2 =3 =
3 5
FIXING ELEMENTS AND ACCESSORIESFemale hinge
with pin
-KF-10032AKF-10040AKF-10050AKF-10063A
Counter hinge 90 (CETOP)
-KF-19032KF-19040KF-19050KF-19063
Male articulated
hinge
2532405063
-KF-11032SKF-11040SKF-11050SKF-11063S
Rear male hinge
Front / rearfl ange
Angle bracket Cable clamping for DF sensor
RPF-11025KF-11032KF-11040KF-11050KF-11063
RTF-12025KF-12032KF-12040KF-12050KF-12063
RTF-13025KF-13032KF-13040KF-13050KF-13063
DF sensor and DHF covering
strip
DFDHF-0020100
DF-001
2532405063
Tolerances
mm
+2/0+3,2/0+3,2/0+3,2/0+3,2/0
Nominal tolerance on stroke (mm) and maximum applicable torque (Nm) fornon-rotating piston rod
2 stages+4/0+4/0+4/0+4/0+4/0
3 stages
Applicable torqueNm
0,50,8123
2 stages--
0,50,81
3 stages2532405063
Available surface
mm2
201314490804
1256
thrust111201377603
1055
traction
Working pressurebar
123192300492769
thrust65
123231369649
traction405063
Available surface
mm2
201314490
thrust111201377
traction
Working pressurebar
123192300
thrust65
123231
traction
Theoretical forces at 6 bar (N)(2 stages)
Theoretical forces at 6 bar (N)(3 stages)
2 stages025 = 25032 = 32040 = 40050 = 50063 = 63
3 stages040 = 40050 = 50063 = 63
2 stages0100 - 0120 - 0160 - 0180 - 0200 - 0300 - 04000500 - 0600 - 0700 - 0800 - 0900 - 1000 - 1100 - 1200
Max stroke:
3 stages0150 - 0180 - 0210 - 0240 - 0270 - 0300 - 0360 - 0450 0600 - 0750 - 0900 - 1000 - 1100 - 1200
Max stroke:
0300 (25)0400 (32)0600 (40)
0900 (50)1200 (63)
1200 (40)1500 (50)1800 (63)
Telescopic cylinders work under optimal conditions when the load is in axial position, i.e. when the cylinder is placed vertically, working either upward or downward. They can obviously work also horizontally and cantilevered, but in this case it is needed to:- Reduce the maximum stroke by 50% compared to nominal maximum strokes - Request cylinders with slide units- Support the radial load by means of other devices such as carriages, slides or sliding guides
Univer > ()
www..com
NTZ
NQZ
NFZ
Pneumatic actuator with integrated digitalmeasuring detector and safety locking system 32 63 mm
Intelligent pneumaticactuatorsNTZ-NQZ-NFZ
Pneumatic actuator with digital measuring detector 32 63 mm
Pneumatic actuator with integrated safety locking system 32 63 mm
Pneumaticpiston
Screw
Lock
Encoder
Univer > ()
www..com
2 42 Subject to change
NTZ - NQZ - NFZ 32 63 mm - Intelligent pneumatic actuators
Pneumatic actuator with integrated digital measuring system and safety locking device
NTZ
CODIFICATION KEY
1
N
1 Series
T Z 0 3 5 03 2 0
2 3
2 Bore (mm)
032 =040 =050 =063 =
3 Max stroke (mm)
32405063
NTZ = 32 63 mm - Pneumatic actuator with integrated digital measuring system and safety locking device
The system does not need to be connected to the moving part of the mechanism, as movement is generated by an internal piston with bidirectional pneumatic function. Such piston, operated by a 5-way valve, moves autonomously untill it meets the obstacle, thus measuring the stopping position. Position detection is obtained by the transformation of the translation movement of the piston rod into the rotary movement of the screw, by means of screw-female screw coupling. Then the encoder turns the rotation into a sequence of electrical impulses. The piston and the encoder body need to be fi xed, i.e. must not move regardless of screw rotation. This is the reason why the cylinder has been designed with octagonal piston and properly modifi ed non-rotating piston rod.The speed of the impact against the obstacle is limited by proper calibrated reducers which are embodied in the actuator, while the translation speed can be suitably controlled by means of a standard fl ow regulator. For the indicated repeatability of reading to be guaranteed, the translation speed needs to be kept as constant as possible. Main application fi elds are: mechanisation, palletization and automation of opeating machines.
Pneumatic actuator with digital measuring system
NQZ
Pneumatic actuators with digital measuring system are particularly suitable for:- Detection of stopping position - Anti-collision control in critical sequencing cycles- Level control in palletization / de-palletization of piled objects- Identifi cation, classifi cation and dimensional selection of objects (tolerances and rejects)- Certifi cation stations of machined pieces or tool breaking on machines for chip removal
The device can be used as both digital measuring detector and pneumatic actuator with digital measuring system
Max speed: 0,2 m/s (detector) 0,8 m/s (actuator)Repeatability accuracy: 0,02 mm
CODIFICATION KEY
1
N
1 Series
Z 0 3 5 03 2 0
2 3
2 Bore (mm)
032 =040 =050 =063 =
3 Max stroke (mm)
32405063
NQZ = 32 63 mm - Pneumatic actuator with integrated digital measuring system
Q
0350 (32)0450 (40)0600 (50)0750 (63)
0350 (32)0450 (40)0600 (50)0750 (63)
Univer > ()
www..com
22
UNIVER GROUP
43
High-Tech
High-Tech
Subject to change
Locking device embodied in the cylinder rear part in axial position.High repeatability and intervention speed (16 m/s).
Recommended application:Emergency braking intervention at the speed allowed by the cylinder; for repeated functioning, as locking unit or braking intervention 50 mm/s.
Piston rod holding force (without axial backlasch): 3 times the thrust of a cylinder supplied at 6 bar.Locking force independent from ambient conditions or piston rod maintenance.Locking device passive functioning, in absence of signal and/or air supply.
Minimum pressure: 3 bar
Pneumatic actuator with integrated safety locking device
NFZ
CODIFICATION KEY
1
N
1 Series